Tender For Special Repair To Bldg No P-583 Of 812 Int And Fs Unit At Ahmedabad Cantt
Tender Value
32.03 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
8 days left
EMD
64500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmedabad → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-583 Of 812 Int And Fs Unit At Ahmedabad Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE (ARMY) AHMEDABAD NAME OF WORK : SPECIAL REPAIR TO BLDG NO P-583 OF 812 INT AND FS UNIT AT AHMEDABAD CANTT CONTRACT AGREEMENT: GE (A)/ABD/ OF 2026-2027 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Demolition of brick work built in CM including all quions, arches, pillars etc complete all as specified. |
| 3 | M & L brick work with sub class \\"B\\"brick (old size) straight or curved on plan exc 6m mean radius in CM 1:6 completed all as specified. |
| 4 | Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed. |
| 5 | M & L for rendering 15mm thick on fair faces of brick/ concrete surfaces in CM (1:4) mixed with water proofing compound in top @ 3% by weight of cement or as per manufacturers instruction finishing the surface fair and even without using extra cement complete all as specified and directed. (WPC measured and paid seperately). |
| 6 | Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed. |
| 7 | M & L for preparation of new plastered surfaces on walls and applying two coats of exterior emulsion paint with anti algal properties (Apex ultima or equivalent) with white exterior wall care putty on over one coat of primer on walls complete all as specified and directed. |
| 8 | M & L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 9 | M & L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant priming paint with 1 mm thick wall care putty complete all as specified and directed. |
| 10 | M & L for complete removal of old plastered surfaces on walls and applying two coats of oil bound distemper over with wall care putty with priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed. |
| 11 | M & L for 10 mm thick rendering on ceiling surfaces in any position in CM (1:3) and finishing the surfaces even and fair complete all as specified and directed. |
| 12 | M & L for preparation of new plastered surfaces on ceilings and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant priming paint with wall care putty complete all as specified and directed. |
| 13 | M & L cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) slab flooring, plinth protection providing 150 mm thickness all as specified. |
| 14 | Demolition of stone slabs and tiles of any description or thickness as in floors, apron etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 15 | M&L for 18-25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified. |
| 17 | M & L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, on wall dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified. |
| 18 | M & L for doubly charged coloured vitrified ceramic tile, light shade flooring of size of tile 600x1200x8-10mm thick as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 including roughening of old surface complete all as specified and directed. |
| 19 | M & L for coloured doubly charged vitrified ceramic tile, light shade flooring of size of tile 600x1200x8-10mm thick as in Skirting, set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over and including backing coat 10mm thick in cement mortar 1:4 including roughening of old surface complete all as specified and directed. |
| 20 | M & L for non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile 400x400 mm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed. |
| 21 | Taking down chowkhats or frames area exc. 1.50 Sqm and n. exc 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 22 | Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 23 | M&L Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant complete as specified & as directed.Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 24 | M & L for Second class hardwood Glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats. |
| 25 | S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete complete all as specified and directed. |
| 26 | S&F 19mm thick expanded closed cell rigid PVC sheet with a particularly fine and homogeneous cell structure and silky matt surfaces, nominal density of PVC sheet should not be less than 500 Kg/m3, complete all as specified and directed. |
| 27 | S & F Factory made solid panel PVC door /cupboard shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 28 | S&F Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specification and drawing complete all as all as specified and directed. |
| 29 | S & F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, rubber gasket, aluminium beading etc including taking down existing vantilator complete all as specified and directed. |
| 30 | S & F powder coated anodised Aluminium alloy sections sliding windows with frames of Jindal or equivalent and 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4 mm nominal thickness one shutter with stainless steel wire cloth .36mm dia and average width of aperture 1.4mm , aluminium alloy handles/lock etc. complete all as specified and directed. Note: Thickness of chowkhats/Frame section and sliding shutter section shall be minimum 1.5mm(Note :Rates include all glazing/aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle, plastering and finishing the surface to match the exisiting surface after fixing of window.) |
| 31 | S & F powder coated anodised Aluminium door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm or mortice lock,hydraulic door closer with 5mm thick tinted glass / preleminated particle board (Novapan) panel and making good of wall surface to match existing surface complete all as specified and directed. |
| 32 | S&F in repair for 18/19mm thick Prelaminated interior grade Block boards, grade 2 quality, decorative type with decorative face veneer on one face solid core, general purposes type fixed with screws to timber frame work complete. |
| 33 | S & F 30 mm flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified and directed. |
| 34 | S & F 25 mm dia fancy type curtain rod with brackets of stainless ends etc fixed in repair complete all as all as specified and directed. |
| 35 | S & F Floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as all as specified and directed. |
| 36 | S & F 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed. |
| 37 | S&F in repairs door closer aluminium (extruded section) body hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete |
| 38 | S & F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete all as specified and directed. |
| 39 | S & F 150 mm size aluminium anodised door handles complete all as all as specified and directed. |
| 40 | M&L for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as all as specified and directed. |
| 41 | Dismantling asbestos cement (corrugated or semi-corrugated etc.) sheets in roof covering complete all as specified. |
| 42 | S & F 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , including Ridge fixed with self tapping screws complete all as specified. |
| 43 | S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 44 | Dismantling timber scantlings 40sq. cm and over in section, in any position as specified. |
| 45 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified. |
| 46 | M & L Rolled steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connectiong plates complete including cutting, grinding, welding etc Fe-290 (Gde E-165) as required complete all as specified. |
| 47 | S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to FE 410-W (Gde-E-250, Quality-A) complete all as specified. |
| 48 | M & L for preparing old steel & iron surfaces of any description over 10cm in width or girth and applying a coat of synthetic enamel paint complete all as specified. |
| 49 | Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified. |
| 50 | S & F 4mm thick coloured textured designer ceiling board (Everest) of size 595X595 mm fixing with screws/clips including Tee grid suspension system of size 600 mm x600 mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc complete all as specified. |
| 51 | S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 52 | S&F Solid PVC Wall Lining consisting of 5mm thick wooden print PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing. |
| 53 | M&L guniting for shortcrete 1 :2 (CM) mixed with epoxy resin and hardner (manufactured by FOSROC/MC BAUCHEMIC /CICO/PIDILITE)@ 2% by weight of cement in equal proportion using short crete pumps and allied equipment,in thickness 30 mm all as per manufactureres instruction.(Upto 5 mtr height) including necessary chiping/taking down loose concrete along with application of rust remover for old rusted bars and rebar if required followed by application of anti corrosive paint over old /rebar as per manufacturers instruction complete all as specified and directed. |
| 54 | S& F mild steel welded fabric of weight exe 3.5 Kg but n.exc. 4 Kg/ Sqm, fixed to steel members with spikes complete all as specified. |
| 55 | Taking down of existing un-serviceable water proofing treatment, taking down cement plaster etc, of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls and washing down with water complete all as specified and directed |
| 56 | M & L for providing screed bed or bedding layer of mortar 10 mm thick for laying floor finishes in CM 1:3 with water proofing compound @ 3 % by weight of cement complete all as specified and directed.Note : WPC shall be measured and paid seperately. |
| 57 | Providing & applying rising damp-proof costing system with single component ready to use damp- proof coating Roff Hydamp : 1. Surface preparation thoroughly brush and clean all laltance, loose particles such as dirt, grease, mortar droppings , release agents, efflorescence, bird droppings , etc. All large volds or hollow portions must be removed and re-plastered , Non - moving cracks having width upto 5 mm must be filled with polymer based brack filler. 2. APPLICATION : Apply the first coat of Dr fixit Damp guard Classic with a paint brush directly on the prepared surfaces by mixing (1 part base : 1 part hardner : 1 part of water). Allow to dry for a minimum 2-3 hrs . Apply on e part of DAMP GUARD mixed chemical and 2 parts of OPC whte cement / Birla putty and make the putty , apply putty on the entire surface area. Allow it to dry for at least 3-4 hours . Apply the Final coat of Dr Fixit Damp guard classic on the entire surface and allow the surface to air cure 48 hours proceeds for Paint complete all as specified and as directed. |
| 58 | M&L for PCC type B-0 (1:2:4) using 12.5 mm aggreage as in padding on roof chajja and similar work like this surfaces including demolition of existing concrete in any position and any height complete all as specified. |
| 59 | Dismantling water tanks and removing to store exceeding 500 ltrs and n exc 1000 ltrs complete all as specified . |
| 60 | S &F 500 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl connecting pipes securing access covers etc complete all as specified. |
| 61 | S & F ball valves high perssure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore, complete all as specified. |
| 62 | Taking up or down steel tubing 15 mm bore of pipe and connections of any description and from any position incl cleaning for refixing or removing from site complete all as all as specified and directed. |
| 63 | Supplying and laying of 16 mm bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in trenches ,laid concealed in floor or wall including all fittings suitable for fixing of plumbing fixture complete all as specified |
| 64 | Taking up or down steel tubing 20 mm bore of pipe and connections of any description and from any position incl cleaning for refixing or removing from site complete all as all as specified and directed. |
| 65 | Supplying and laying of 20 mm bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in trenches ,laid concealed in floor or wall including all fittings suitable for fixing of plumbing fixture complete all as specified |
| 66 | S & F in repairs 10 ltrs capacity PVC valve less, syphonic action type flusing cistern, low level white with inlet ball valve float and handle including brackets fixed in repairs complete all as specified and directed. |
| 67 | Supply and fixed in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed. |
| 68 | Supply only central hole basin mixer for WHB complete all as specified and directed. |
| 69 | S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed 15mm bore dia complete all as specified and directed |
| 70 | S&F in repairs vitreous china wash basin, white, flat back, size 550x400m excluding taps, waste , chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified and directed. |
| 71 | S & F in repairs Bib taps (long body )fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as directed. |
| 72 | S & F in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed |
| 73 | S & F in repair pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore complete all as specified and directed. |
| 74 | S & F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete including complete all as all as specified and directed. |
| 75 | S & F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed. |
| 76 | S & F in repairs health faucet spray type brass, chromium plated, and 1.5 m long PVC flexible pipe complete all as specified and directed. |
| 77 | S & F in repairs PTMT Swivel Shower rose, 15 mm dia ( Minimum wt 40 gms), complete all as all as specified and directed. |
| 78 | S & F in repair 15 mm stainless steel bore angle cock with flage chromium plated complete all as specified and directed. |
| 79 | Taking down eaves gutters and rain water pipes of presure rating 4kg/cm2 (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc complete all as specified and directed. |
| 80 | Supply and fixing 110mm PVC (SWR) pipes single socket in any length fixed to wall complete all as specified and directed. |
| 81 | Supply and fixing 75mm PVC (SWR) pipes single socket in any length fixed to wall complete all as specified and directed. |
| 82 | Supply and fixing PVC (SWR) bends 110mm dia complete all as specified and directed. |
| 83 | Supply and fixing PVC (SWR) bends 75 mm dia complete all as specified and directed. |
| 84 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 85 | M&L 100 mm thick PCC type B-2, (1:2:4) using 20mm graded stone aggregate finishing cement concrete surface even and smooth without using extra cement all as specified. |
| 86 | M & L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with 50 mm sand filling under roof or below paver blocks incl. watering and consolidation complete all as specified. |
| 87 | Taking down copper/aluminium point wiring ( light, socket or power) complete,incl fixtures and fittings like switches, ceiling rose, pendant, regulator, sockets, light fitting ( Mirror light,Bulk head,LED Panel 2''x2'',security light,wall fitting,down light, Flood light,post top lantern) etc. removing materials for taking credit and making good disturbed surfaces of walls, floors, etc with cement plaster, putty and paint to match with the existing surface complete all as specified and directed. |
| 88 | M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass/GI screws for mounting switches, sockets, fan regulator, etc. / modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator etc complete all as specified and directed for the following points:-One light / ceiling fan / exhaust fan / call bell point controlled by one switch |
| 89 | M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass/GI screws for mounting switches, sockets, fan regulator, etc. / modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator etc complete all as specified and directed for the following points:-One 6A socket point controlled by one switch on independent board |
| 90 | M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass/GI screws for mounting switches, sockets, fan regulator, etc. / modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator etc complete all as specified and directed for the following points:-One 6A socket point controlled by one switch on same board |
| 91 | All as per item No. 87.00 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires. |
| 92 | Taking down carefully aluminum or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete all as specified and directed. |
| 93 | M&L for sub main wiring along with earth wire with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc including taking down existing unserviceable sub main wiring of 2runs x 4 sqmm(Ph & N) + 1run x 4 sqmm(earth wire) complete all as specified and directed for the following sizes:- (Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length) |
| 94 | M&L for sub main wiring along with earth wire with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc including taking down existing unserviceable sub main wiring of 2runs x 6 sqmm(Ph & N) + 1run x 6 sqmm(earth wire) complete all as specified and directed for the following sizes:- (Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length) |
| 95 | Notes for item No. 86.00 to 93-00: (i) Quoted rate shall deemed to include the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface.(ii) If any beam / column / Rock wall is encountered while cutting chases, that particular portion may be provided with PVC casing & capping or surface conduit for drawing cables and surface PVC gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) No cutting shall be done on ceiling for laying PVC conduit for ceiling fan point wiring. Surface conduit or PVC casing capping may be used in that portion. |
| 96 | Supply and fix in replacement of Modular switch 1 way 6A, 1 module 240V, 50Hz complete all as approved. |
| 97 | Supply and fix in replacement of Modular switch 1 way 16A, 1 module 240V, 50Hz complete all as approved. |
| 98 | Supply and fix in replacement of Modular Bell push 6A 1 module, 240V, 50Hz complete all as approved. |
| 99 | Supply and fix in replacement of Electric Call Bell ding dong type, AC, 240V, 50Hz complete all as approved. |
| 100 | Supply and fix in replacement of Modular Socket, 6A - 2/3 pin combined 2 module 240V, 50Hz complete all as specifed and directed. |
| 101 | Supply and fix in replacement of Modular Socket 6A/16A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed. |
| 102 | Supply and fix in replacement Ceiling Rose in poly carbonate 3 terminal brass, flush type 6 Amps, 220 volts AC, ISI marked, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified. |
| 103 | Supply and fix in replacement of Modular BLDC fan regulator step type in 5 steps, 240V, 50Hz complete all as specfied and directed. |
| 104 | Supply and fix in replacement of recessed mounted LED panel light 2'x2' size, 36 watts, full white / warm white as per site requirement with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for POP / Amstrong / grid false ceiling complete with all fixing accessories including making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified. |
| 105 | Supply and fix in replacement of old unserviceable LED tube light fitting Integral slim LED batten 20 watts with polycarbonate housing and diffuser internally prewired complete with all accessories and including connecting up with pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified. |
| 106 | Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser with flexible neck for adjustable light angle,chrome finish aluminum housing, 12 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 107 | Taking down existing old ceiling / exhaust fan of any size carefully, sealing cable end, dismantling blades and removing fan and blades and deposited to AGE E/M store yard complete all as specified and directed |
| 108 | S&F in replacement of old ceiling fans complete with blades, down rods, and accessories, 230V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 109 | Supply and fix in replacement of ventilating / PVC exhaust fans fancy square type 250mm sweep with plastic fiber body heavy duty 230 Volt AC, single phase complete with plastic louvers and including making suitable size of holes in wall for fixing the fan including making electrical connection with ceiling rose including taking down existing unserviceable ventilating fan of any description complete all as specified and directed. |
| 110 | Taking down old usnerviceable Wall Fans and Supply & fix Wall fans 400mm sweep with plastic fiber body, and web mesh guard, 230V AC, single phase, oscillating type complete and fixing the fan to wall including making electrical connection with ceiling rose including taking down existing unserviceable wall fan of any description complete all as specified and directed. Make : Havells Model :Platina (BLDC White) (SKU code : FHWPB5SWHY16) / Atomberg Model :EFFICIO+ / Usha Model : Striker Plus |
| 111 | S&F MS pipe medium grade 32mm dia fixing near the roof for hanging of ceiling fan complete all as specified and directed. |
| 112 | Supply and making the hook for hanging of ceiling fan with flat iron including nut bolts, 2 washers complete all as specified and directed. |
| 113 | Supply and fix in replacement of LED street/security light fitting 30 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including GI pipe bracket made up of 40mm dia medium grade GI pipe of length 1.00m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified. |
| 114 | S&F telephone socket double RJ-11, 1 module as approved complete all as specified and directed. |
| 115 | M&L for PVC insulated unarmoured telephone cable for indoor applications 0.5 mm ATC 1 pair confirming to TEC specification G/WIR06/02 drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories as required complete all as specified and directed. |
| 116 | Supply and fix in replacement of modular MCB protected plug and socket board in sheet steel enclosure with 25 Amp rated mini MCB and 25 Amp rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board including taking down existing unserviceable plug & socket board of any description and making good with cement plaster, putty and paint to match with the existing surface all as specified. |
| 117 | Supply and fix in replacement of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately. |
| 118 | Supply and fix MCCB 160A, 16 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release fixed in Vertical TPN complete all as specified and directed. |
| 119 | Supply and fix in replacement of MCB 63A, 10 KA, TPN, 'C' curve, 240 V, 50 Hz including taking down existing unserviceable MCB of any description complete all as specified and directed. |
| 120 | Supply and fix MCB distribution board, SPN, 8 way, 230 V, 1 phase, AC in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. Note: MCBs shall be measured and paid separately. |
| 121 | Supply and fix in replacement of MCB 6 - 32A, 10 KA, single Pole, 'C' curve, 240 V, 50 Hz including taking down existing unserviceable MCB of any description complete all as specified and directed. |
| 122 | Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron with universal clamp made of SS earth enhancing compound shall be of 30kg/pit(resistivity is less than 0.12 Ohm meter).The bove arrangements shall be provided with heavy duty earth poly plastic pit cover of 4000 kg load bearing capacity (Size:270 x 40 200mm) complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender