Tender For Comprehensive Repair To B/R Works At Icgs Vadinar Under Ge (I) Cg Porbandar.
Tender Value
15 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
0 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Repair To B/R Works At Icgs Vadinar Under Ge (I) Cg Porbandar.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' |
| 2 | Supply & Fixing in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.4mm and fixed with stainless steel wire staples including old or new beading, complete all as specified and directed by Engineer-in-Charge. |
| 3 | Hacking out old broken glass (any thickness size quality or description) from wooden, steel or aluminium frames glazed with putty or fixed with wooden beads, complete all as specified and directed by Engineer-in-Charge. |
| 4 | Supply & Fixing 3mm thick sheet glass ordinary quality and glazing with oil putty or beading in squares not exceeding 0.5 sqm in each pane, complete all as specified and directed by Engineer-in-Charge. |
| 5 | Supply & Fixing in repair 20mm dia aluminium curtain rod with brackets etc., complete all as specified and directed by Engineer-in-Charge. |
| 6 | Supply & Fixing in repair 150mm aluminium handles, cast type anodised fixed, complete all as specified and directed by Engineer-in-Charge. |
| 7 | Supply & Fixing in repair 200mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed by Engineer-in-Charge. |
| 8 | Supply & Fixing in repair 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy but fixed, complete all as specified and directed by Engineer-in-Charge. |
| 9 | Supply & Fixing in repair rubber beading 50mm wide and 5mm thick as approved, complete all as specified and directed by Engineer-in-Charge. |
| 10 | Taking down shutters of any description exceeding 1.0 Sqm each, complete all as specified and directed by Engineer-in-Charge. |
| 11 | Taking down shutters of any description exceeding 1.0 Sqm and not exceeding 2.0 Sqm each, complete all as specified and directed by Engineer-in-Charge. |
| 12 | Supply & Fixing 35mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. as specified in SSR Part I, Section 8, clause 8.20 (a), complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply & Fixing 40mm thick Flush Shutter, solid core construction, with block board core and plywood face panels, both face is covered with decorative face veneer with lipping/ frame to match commercial type on both side, complete all as specified and directed by Engineer-in-Charge. |
| 14 | Supply & Fixing 100mm long medium weight, cold rolled mild steel Butt hinges and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 15 | Supply & Fixing 150mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and directed by Engineer-in-Charge. |
| 16 | Supply & Fixing 150mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed by Engineer-in-Charge. |
| 17 | Supply & Fixing 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and directed by Engineer-in-Charge. |
| 18 | Material & Labour for 1.5mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions on 18mm thick calibrated plywood of, grade BWR, type BB, fixed with screws to timber frame work, complete all as specified and directed by Engineer-in-Charge. |
| 19 | Supply & Fixing in repair Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30mm, complete all as specified and directed by Engineer-in-Charge. |
| 20 | Supply & Fixing 75mm size SS cupboard hinges medium weight cold rolled, complete all as specified and directed by Engineer-in-Charge. |
| 21 | Supply & Fixing Magnetic catcher and connected plate to shutters and frame as per Sample, complete all as specified and directed by Engineer-in-Charge. |
| 22 | Supply & Fixing 100mm long aluminium handle fabricated type anodised, complete all as specified and directed by Engineer-in-Charge. |
| 23 | Supply & Fixing in repair Telescopic Channel of size 450mm (when closed), mild steel chromium plated, roller type, heavy duty etc., complete all as specified and directed by Engineer-in-Charge. |
| 24 | Supply & Fixing in repairs Aluminium (Die cast) body Door closer hydraulically regulated, designation No.2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 25 | Demolition of cement concrete(unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above G.L), complete all as specified and directed by Engineer-in-Charge. |
| 26 | Material & Labour for 25mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded aggregate) as in levelling course in flooring, complete all as specified and directed by Engineer-in-Charge. |
| 27 | Dismantling of floor hearth or wall tilling including cement mortar bedding and removing rubbish off the premises, complete all as specified and directed by Engineer-in-Charge. |
| 28 | Material & Labour for granite 18 to 20mm thick (of any type) tiles, machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture or pigment to match the shade of granite stone including grinding and polishing, moulding edges as directed and making hole for gas pipe if required complete including15mm thick rendering/backing in Cement Mortar 1:3, complete all as specified and directed by Engineer-in-Charge. |
| 29 | Material & Labour for Non-skid joint free coloured Ceramic tiles (1st quality) not less than 7mm thick of size exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in Cement Mortar 1:6, complete all as specified and directed by Engineer-in-Charge. |
| 30 | Material & Labour for joint free (edge cut) coloured glazed ceramic tiles thickness not less than 7mm size of tiles 300mm x 450mm as in skirting / dado etc., laid jointed in neat cement slurry and pointed with coloured cement to match the tiles over and including 10mm thick backing coat in Cement Mortar 1:4, complete all as specified and directed by Engineer-in-Charge. |
| 31 | Material & Labour for Non-skid Ceramic tiles 10mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm screed bed or bedding layer in 1:4 Cement Mortar, complete all as specified and directed by Engineer-in-Charge. |
| 32 | Material & Labour for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match set and jointed in neat cement slurry and pointed with white or coloured cement to match the tiles over and including 15 mm thick screed be in Cement Mortar 1:6, complete all as specified and directed by Engineer-in-Charge. |
| 33 | Supply & Fixing in repair 1000 litres capacity triple layer, rotational moulded, polythene water storage tank with cover (Cylindrical vertical with closed top), colour white, hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc., and including 25mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, complete all as specified and directed by Engineer-in-Charge. |
| 34 | Supply & Fixing in repair tubular towel rail, 20mm dia., D type, 60 cm long between flanges of brass chromium plated, complete all as specified and directed by Engineer-in-Charge. |
| 35 | Supply & Fixing in repair soap dish of chromium plated fixed to plugs with chromium plated screws, complete all as specified and directed by Engineer-in-Charge. |
| 36 | Dismantling mild steel work of any description not otherwise provided, complete all as specified and directed by Engineer-in-Charge. |
| 37 | Supply & Fixing steel work in tubular trusses including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240, complete all as specified and directed by Engineer-in-Charge. |
| 38 | Supply & Fixing in repair Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws, complete all as specified and directed by Engineer-in-Charge. |
| 39 | Supply & Fixing in repair health faucet with all accessories, complete all as specified and directed by Engineer-in-Charge. |
| 40 | Supply & Fixing in repair PVC waste pipe of 32mm dia., complete all as specified and directed by Engineer-in-Charge. |
| 41 | Supply & Fixing in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shank and fly nuts screwed for iron pipes, complete all as specified and directed by Engineer-in-Charge. |
| 42 | Supply & Fixing in repair handles for 10 Ltr capacity PVC flushing cistern, complete all as specified and directed by Engineer-in-Charge. |
| 43 | Supply & Fixing in repair 15mm float valve for 10 Ltr capacity PVC Flushing cistern, complete all as specified and directed by Engineer-in-Charge. |
| 44 | Supply & Fixing in repair for washers for 10 Ltr capacity PVC flushing cistern, complete all as specified and directed by Engineer-in-Charge. |
| 45 | Supply & Fixing in repair vitreous china Pedestal type water closet with white seat cover, complete all as specified and directed by Engineer-in-Charge. |
| 46 | Supply and fix in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 450 mm white with integral foot rests with cast iron ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed.Make : Cera, Perryware, hindware |
| 47 | Supply & Fixing in repair Vitreous China ware wash hand basin white, flat back, size 550mm x 400mm size with cutting for and pinning ends of brackets or erecting stand including CP waste coupling, 32mm dia PVC waste pipe fixed, complete all as specified and directed by Engineer-in-Charge. |
| 48 | Supply & Fixing in repair vitreous china Urinal Half stall type white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe, complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply & Fixing in repair PVC valveless, syphonic action type, flushing cistern, low level with inlet, ball valve, float and handle including brackets.(The colour will also perfectly match with the EWC.), complete all as specified and directed by Engineer-in-Charge. |
| 50 | Supply & Fixing in repairs for 15mm dia CP tap of brass type cast copper alloy with crutch or butterfly handle fixed, complete all as specified and directed by Engineer-in-Charge. |
| 51 | Supply & Fixing in repairs brass CP shower rose 75mm size fancy type with swivel joint any size incl fixing to steel pipe/union for 15mm dia., complete all as specified and directed by Engineer-in-Charge. |
| 52 | Supply & Fixing in repair PVC connection of 15mm dia length 450mm with PTMT nuts fixed, complete all as specified and directed by Engineer-in-Charge. |
| 53 | Supply & Fixing in repair PVC connection of 15mm dia length 600mm with PTMT nuts fixed, complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply & Fixing in repair stop valve 15mm dia., caster copper alloy, screwed down, high pressure fancy type chromium plated screwed of both ends for iron pipe or for unions with long shank and cup (concealed type) and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply & Fixing in repair CP Grating 100mm dia fixed, complete all as specified and directed by Engineer-in-Charge. |
| 56 | Supply & Fixing in repair powder coated aluminium Door/window frame made of 91mm x 43mm x 1.50mm sections and shutters made of 39.4mm x 17.7mm x 1.50mm thick sections with 4mm thick tinted glass and mash shutter made of 39.4mm x 17.7mm x 1.50mm thick sections with fixed stainless steel wire mash including locking handle, complete all as specified and directed by Engineer-in-Charge. |
| 57 | Material & Labour for powder coated aluminium Deco grill/chequered mesh of size 75mm x 75mm including 'U' channel etc; fixed in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 58 | Material & Labour for cleaning of HDPE service water tank of capacity 500 ltr to 1000 ltr and circulating pipes at any position by removing sludge, mud, moss moulds, efflorescent salts, oil spots etc., or any other foreign material from the bottom, cover and internal surfaces by scrapping using wire brush draining out water from the tank and washing internally with water and bleaching powder (0.10 kgs of bleaching powder will be mix in 1 litre water ) and again draining out water from tank and writing the date of cleaning with white synthetic enamel paint on black background with synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge. |
| 59 | Supply & Fixing in repair 20mm outer dia CPVC pipes SDR 11 & plain CPVC SER 11 fittings including bends, elbows, unions etc,, fixed on wall concealed or exposed /ceiling or laying in floors, complete all as specified and directed by Engineer-in-Charge. |
| 60 | Supply & Fixing in repair 25mm outer dia CPVC pipes SDR 11 & plain CPVC SER 11 fittings including bends, elbows, unions etc,, fixed on wall concealed or exposed /ceiling or laying in floors, complete all as specified and directed by Engineer-in-Charge. |
| 61 | Supply & Fixing in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule and fixed 25mm dia., complete all as specified and directed by Engineer-in-Charge. |
| 62 | Supply & Fixing in repairs water tank covers for 500/1000 ltrs capacity tank, complete all as specified and directed by Engineer-in-Charge. |
| 63 | Providing and fixing in repairs Aluminium Composite panels in all coloures of approved brand for external / internal wall cladding at all heights and elevations including necessary aluminium composite panel consist of 3mm thermoplastic core of anti oxident LDPE sandwitched between two skin of 0.5 mm thick alloy sheet making a total sheet thickness of 4 mm. The surface shall be finished with PDVF base coating on the top side and service coating on the reverse side shall be with a polymer paint. The system to be fixed to the brick / stone / masonry / RCC wall & Framed structure with necessary clamps, bracket and anchor fasteners fixed over and including base frame fabricated with aluminium square pipe of size 25mm x 25mm with 1mm thickness in 600mm x 600mm size grid including stainless steel screws, nut, bolts, washers, cleats, weather silicone sealant for groove filling, backer rods etc, complete all as per Manufacturer instruction, complete all as specified and directed by Engineer-in-Charge.All Clamps and brackets shall be hot dip galvanised minimum 80 micron thick and confirmed to IS : 4759 - 1996. The extruded aluminium sections shall be anodised in approved colour with anodic coating minimum 20 microns.(items include cost of aluminium frame, ACP Panels, Cramps, weather sealant, gasket, foam, fixtures, scaffolding, all machineries and any other fastening streps, nuts, bolts, rivets, washers, etc complete).The manufacturer shall also give guarantee/warranty for ACP panels for a period of Five years. |
| 64 | Demolition of brick and stone wall built in cement mortar including all quoins, arches, pillars built in cement mortar, complete all as specified and directed by Engineer-in-Charge. |
| 65 | Material & Labour for Pre-cast cement concrete block masonry type C-1, 1:3:6 (20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge. |
| 66 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc., including removal of debries to a distance exc 1.5 Km but n. exc 2 Km., complete all as specified and directed by Engineer-in-Charge. |
| 67 | Material & Labour rendering 15mm thick on stone or concrete surfaces in Cement Mortar 1:4 finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 68 | All as above but 5mm thick cement plaster on ceiling in Cement Mortar 1:3, complete all as specified and directed by Engineer-in-Charge. |
| 69 | Material & Labour for preparation of new surfaces of ceiling and applying three coats of white wash, complete all as specified and directed by Engineer-in-Charge. |
| 70 | Material & Labour for preparation of new / old plastered surfaces of wall applying two coat of oil bound distemper a coat of chalk white primer of approved shade, complete all as specified and directed by Engineer-in-Charge. |
| 71 | Material & Labour for preparation of new/ old plastered surfaces of wall applying two coat of exterior weather proof paint over a coat of chalk white primer of approved shade, complete all as specified and directed by Engineer-in-Charge. |
| 72 | Material & Labour for preparation of New decorated steel surfaces including cornices, pilasters etc. and applying two coat of synthetic enamel paint over a coat of zinc oxide, complete all as specified and directed by Engineer-in-Charge. |
| 73 | Supply & Fixing in repair False ceiling of non-asbestos fibre cement building boards/ Mineral fibre, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600mm x 600mm x 12mm thick over and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main and cross member) of size 20mm x 20mm x 1.00mm thick in square pattern of grid size 600mm x 600mm. The aluminium frame work will be supported on side wall with the use of 'L' section of size 20mm x 20mm x 1.00 angles etc. Snap grid shall be supported with hangers of 4mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc., by means of ceiling cleats made out of galvanised iron flat of size 40 x 3 mm size 60mm long and expansion hold fastener 12.5 mm dia 40mm long, complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender