Tender For Providing Of Swimming Pool At Kota Mil Stn
Tender Value
13.30 Crore
Estimated cost
Bid Submission
16 Sep 2026
31 days left
EMD
9.90 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kota → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Swimming Pool At Kota Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Lump sum price worked out by the contractor for \\"BUILDING WORKS\\" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES |
| 2 | Lump sum price worked out by the contractor for \\"INTERNAL WATER SUPPLY \\" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES |
| 3 | Lump sum price worked out by the contractor for \\"INTERNAL ELECTRIFICATION\\" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES |
| 4 | Lump sum price worked out by the contractor for \\"ROAD, PATH, CULVERT AND HARD STANDING\\" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES |
| 5 | Lump sum price worked out by the contractor for \\"SEWAGE DISPOSAL\\" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES |
| 6 | Lump sum price worked out by the contractor for \\"AREA DRAINAGE \\" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES |
| 7 | Lump sum price worked out by the contractor for \\"COMPOUND WALL ,FENCING AND GATE \\" as listed in Schedule ‘A’ Part-VII\\" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES |
| 8 | Lump sum price worked out by the contractor for \\"EXTERNAL WATER SUPPLY\\" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES |
| 9 | Lump sum price worked out by the contractor for \\"EXTERNAL ELECTRIFICATION\\" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES |
| 10 | Lump sum price worked out by the contractor for \\"SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK\\" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES |
| 11 | Sch 'A' Part-XI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as \\"Rs 0.00\\" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under SCH A PART-X SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK schedule). |
| 12 | COMPOUND WALL ,FENCING AND GATEM&L for steel gate 5.45 m wide and 2.70 m height with RCC pillar including excavation in any type of soil, plastering, painting, etc complete all as specified and shown in TD/2008/101 sheet No 1/3 to 3/3 |
| 13 | M&L for Wicket gate 1.5 m wide with RCC pillar including excavation in any type of soil, plastering, painting, etc complete all as specified and shown in TD/2008/101 sheet No 1/3 to 3/3 |
| 14 | EXTERNAL WATER SUPPLY Supply , laying and testing of both end flanged type Ductile Iron pressure pipe 150 mm bore centrifugally cast, Class K-9, conforming to IS: 8329/2000 - blast furnace slag cement with portland cement properties suitable for push-on-jointing (Rubber tyton joints) with inside cement mortar lining with internal metallic zinc coating and external Black Bitumen coating complete all as specified and as directed by Engr-in-charge.Note: The rate quoted by contractor are inclusive of all type of Joints. |
| 15 | Supply , laying and testing of both end flanged type Ductile Iron pressure pipe 100 mm bore centrifugally cast, Class K-9, conforming to IS: 8329/2000 - blast furnace slag cement with portland cement properties suitable for push-on-jointing (Rubber tyton joints) with inside cement mortar lining with internal metallic zinc coating and external Black Bitumen coating complete all as specified and as directed by Engr-in-charge.Note: The rate quoted by contractor are inclusive of all type of Joints. |
| 16 | Supply and fixing of UPVC (SCH-40 ) Piping including necessary fitting such as Elbows, Bends, Sockets, Tees, Collars, Nipples, Reducers, Stub Ends, diminishing pieces, Solvent Cement, etc. for Swimming Pool Inlet & Drain & Suction piping, Swimming Pool filtration plant piping, drain pipe along the pipe periphery including all fittings, fixtures and Ceiling/ Wall Support System suitable for 315mm dia UPVC pipe etc complete all as specified and as directed by Engr-in-charge.Note : The pipes and fittings shall be tested to pressure of 10 Kg/Sqcm. |
| 17 | Supply and fixing of UPVC (SCH-40 ) Piping including necessary fitting such as Elbows, Bends, Sockets, Tees, Collars, Nipples, Reducers, Stub Ends, diminishing pieces, Solvent Cement, etc. for Swimming Pool Inlet & Drain & Suction piping, Swimming Pool filtration plant piping, drain pipe along the pipe periphery including all fittings, fixtures and Ceiling/ Wall Support System suitable for 250mm dia UPVC pipe etc complete all as specified and as directed by Engr-in-charge.Note : The pipes and fittings shall be tested to pressure of 10 Kg/Sqcm. |
| 18 | Supply and fixing of UPVC (SCH-40 ) Piping including necessary fitting such as Elbows, Bends, Sockets, Tees, Collars, Nipples, Reducers, Stub Ends, diminishing pieces, Solvent Cement, etc. for Swimming Pool Inlet & Drain & Suction piping, Swimming Pool filtration plant piping, drain pipe along the pipe periphery including all fittings, fixtures and Ceiling/ Wall Support System suitable for 200mm dia UPVC pipe etc complete all as specified and as directed by Engr-in-charge.Note : The pipes and fittings shall be tested to pressure of 10 Kg/Sqcm. |
| 19 | S&F for 315mm dia Butterfly Valve With Flange adaptors cast iron double flanged long type,lever operated, butterfly valve, PN 1.6, ISI Marked (IS-13095:1991, Reaffirmed 2003),including provision of carbon steel nuts, bolts & washers, rubber gaskets etc., fixed to water mains, etc complete all as specified and directed. |
| 20 | S&F for 250mm dia Butterfly Valve With Flange adaptors cast iron double flanged long type,lever operated, butterfly valve, PN 1.6, ISI Marked (IS-13095:1991, Reaffirmed 2003),including provision of carbon steel nuts, bolts & washers, rubber gaskets etc., fixed to water mains, etc complete all as specified and directed. |
| 21 | Supply and installing, connecting and testing of 315mm dia Flap check Valve with flange adaptors cast iron non return valve, double flanged/built weld end bolted cover, swing check type, ISI marked, designed as per BS-1868, pressure rating PN 10, including jointing materials such as rubber gasket, carbon steel nuts, bolts and washers etc complete all as specified and directed . |
| 22 | S&F of 2.5sqmm x 3 core copper cable with PVC conduits from junction boxes to transformer & transformer to control panel.etc complete all as specified and directed . |
| 23 | S&F of 4sqmm x 4 core copper cable with PVC conduits from junction boxes to transformer & transformer to control panel.etc complete all as specified and directed . |
| 24 | S&F of 6sqmmx 5 core copper cable with PVC conduits from junction boxes to transformer & transformer to control panel.etc complete all as specified and directed . |
| 25 | S&F of PVC electrical conduit pipe of 25 mm dia etc complete all as specified and directed . |
| 26 | S&F of UPVC Perforrated trucking of size 100x100mm with standard slots complete with all accessories bends, tees, elbows etc complete all as specified and directed . |
| 27 | M&L for construction of valve chamber of brick masonry from the top of surface with MS covers 3.15 mm thick and 40x40x6 mm MS angle with hinges for locking arrangement including excavation and earth works PCC (1:3:6) type C2 for foundation PCC bed/coping in cement concrete (1:2:4) type B1, plastering in CM 1:3 painting with two coats of synthetic enamel paint over a coat of red oxide primer for the size of chamber 1050 mm x 1050 mm x 1100 mm (internal dimention) all as per TD drg No TD/2004/26 sheet No 1/3 to 3/3 etc complete all as specified and directed. |
| 28 | M&L for construction of valve chamber of brick masonry from the top of surface with MS covers 3.15 mm thick and 40x40x6 mm MS angle with hinges for locking arrangement including excavation and earth works PCC (1:3:6) type C2 for foundation PCC bed/coping in cement concrete (1:2:4) type B1, plastering in CM 1:3 painting with two coats of synthetic enamel paint over a coat of red oxide primer for the size of chamber 600 mm x 600 mm x 600 mm (internal dimention) all as per TD drg No TD/2004/26 sheet No 1/3 to 3/3 etc complete all as specified and directed. |
| 29 | EXTERNAL ELECTRIFICATIONSupply, Install, Test and Commissioning of LT panel Board indoor type fabricated out of 3.15 mm thick CRCA sheet double door, CPRI approved complete with powder coating with seven tank process mounted on M.S angle Iron frame, duly grouted with PCC reqd. with the following:-(a) Copper bus Bar 250 Amps duly sleeved (TPN) with suitable sizes - 01 Set.(b) On load change over switch 4 pole 160 amps- 01 Nos(c) For Main incoming:- MCCB FP 160 Amps 36 KA -01 No(d) MCCB FP 100 Amps 25 KA -03 Nos (2 W+1S)(e) MCB 'C' Curve FP 32 Amps 10 KA -03 Nos (f) Indicating Lamp R. Y. B (LED) Type - 01 Set.(g) Digital Volt meter / ammeter with selector Switch(h) Street light Astro mini digital timer, single phase, Base DIN -1 No(j) Contactor 3P, 63 Amps, AC3 -1 No |
| 30 | Supply, installing, testing and commissioning, factory made and tested (incl CPRI type test certified), LT feeder pillar box (KIOSK) of appropriate dimensions (as per Indian Electricity rules) to accommodate following components, outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated copper bus bars 250 Amps rating installed on porcelain insulators. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15 mm CRCA MS sheet and 40x40x6mm thick angle iron frame work, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front & rear opening type, with aprons for cable entry, with double door shutter and locking arrangement internal wiring with PVC insulated, multistranded copper conductor, FRLSH cables, IS-694 marked of adequate size but not less than 4 sqmm. The scope of work includes the following components:- |
| 31 | Copper bus Bar 200 Amps duly sleeved (TPN) with suitable sizes - 01 Set.Incoming :(i) MCCB four pole 100 Amp, 415 Volts, rupturing capacity- 25 kA, 415 Volts Fixed thermal magnetic release- 01 NoOutgoing :- (i) MCB 3 pole 32 Amp ('C' Curve), rupturing capacity- 10 kA , 415 V AC , 50 Hz complete - 04 Nos(3w + 1 s/by) (ii) Digital Voltmeter - 01 No (iii) Digital Ammeter- 01 No (iv) Indicating Lamp R. Y. B (LED) Type - 01 Set.(v) Star-Delta Starter suitable for 10 HP motor including all connected accessories and over/under current protection relay and automatic phase changer, single phase preventer- 04 Nos Note :Necessary approval of drawings of LT feeder pillars to be taken from GE before placing order by the contractor |
| 32 | Supply, installing, testing and commissioning, factory made and tested (incl CPRI type test certified), LT feeder pillar box (KIOSK) of appropriate dimensions (as per Indian Electricity rules) to accommodate following components, outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated copper bus bars 100 Amps rating installed on porcelain insulators. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15 mm CRCA MS sheet and 40x40x6mm thick angle iron frame work, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front & rear opening type, with aprons for cable entry, with double door shutter and locking arrangement internal wiring with PVC insulated, multistranded copper conductor, FRLSH cables, IS-694 marked of adequate size but not less than 4 sqmm. The scope of work includes the following components:- |
| 33 | Copper bus Bar 200 Amps duly sleeved (TPN) with suitable sizes - 01 Set.Incoming :(i) MCB four pole 32 Amp, 415 Volts, rupturing capacity- 25 kA, 01 No Outgoing :- (i) MCB FP 25 Amp ('C' Curve), rupturing capacity- 10 kA , 415 V AC , 50 Hz complete - 01 No(ii) MCB FP 20 Amp ('C' Curve), rupturing capacity- 10 kA , 415 V AC , 50 Hz complete - 01 No (iii) Digital Voltmeter - 01 No (iv) Digital Ameter- 01 No (v) Indicating Lamp R. Y. B (LED) Type - 01 Set. Note :Necessary approval of drawings of LT feeder pillars to be taken from GE before placing order by the contractor |
| 34 | S&F for steel tubular swaged poles type 410SP-31(9.0 meter long) Swan Neck Type complete with CI base plate and finial and single swan neck, Including foundation and coping . etc complete all as specified and directed. |
| 35 | Supply and fixing of Hybrid solar street lights that combines the use of solar energy and AC power. The lights use solar panels to charge a battery during the day, and then use the stored energy to power LED lights at night. They are also connected to the grid, which provides a backup power source in case the battery runs out of charge. The use of both solar and AC power allows these lights to have a longer operating time, especially during overcast days or in areas with less sunlight. The hybrid solar lights provide an efficient and reliable lighting solution that can save energy costs and also reduce the reliance on traditional power sources. Street lights with built in Mono Crystalline Panel, Lithium Ferro Phosphate (LiFePO 4) battery, MPPT chatge controller and PIR sensor , 50 watt capacity , 6000k, 150 lm/watt, complete all as specified and directed. |
| 36 | S&F for Pole mounted junction box/cut-out box/fuse box of size 300x200x105 mm for road/street lighting for 3 phase/4 core high wattage LED flood lights based lighting system for industrial, commercial use etc complete all as specified and directed. |
| 37 | S&F of multi core flexible copper conductor PVC insulated and sheathed cable, 1100 Volts, 2.5 sqmm, 3 core between cable loops box to street light fitting, cable should bedrawn through poles complete all as specified and directed. |
| 38 | FILTRATION PLANTFILTER FOR MAIN POOL AND DIVING POOLSupply, install, testing and commissioning of vertical fibre glass filter of 2.00M dia made of polyester shell with a liner employing special version with polypropylene arm collector, and PVC distribution network with a net filtering area of 3.14Sq.m capable of filtering @123200Ltr / hr / at 40000Ltrs / Sq.mt/ hr of filter bed area with inlet & outlet opening of 160mm dia flange. as per standard design for the efficient working of the system complete with first charge of the filter media. ( out let size cannot be lesser than 125mm dia) etc complete all as specified and directed. |
| 39 | M& L for Grade 1 activated filter media (AFM glass media) Media ( Filteration upto 1 micon) 25 kg in bags etc complete all as specified and directed. |
| 40 | M& L for Grade 2 & 3 activated filter media (AFM glass media) Media ( Filteration upto 1 micon) 25 kg in bags etc complete all as specified and directed. |
| 41 | Supply and fixing of Valve batteries made in Zinc plated steel, consisting of 5 Nos, 160mm dia PVC butterfly Valve, suitable mounting supports, pressure gauge with required size inlet. outlet, flanges & 2 support brackets with suitable clamps & fixing screws. ( valve size cannot be lesser than 125mm dia & respective piping) etc complete all as specified and directed. |
| 42 | Supply and fixing of Centrifugal self-priming pump with high hydraulic efficiency, chemical resistant and ultra-quiet operation. Integrated along with IP-55 protection- class F continuous rating high efficiency IE3 motors. Pump shall be of two-piece body made in polypropylene 30%+ GF, integrated polypropylene 30% + GF pre-filter with strainer basket, fast opening translucent transparent polycarbonate lid, easy opening metal knob lid system, 316 SS Shaft and mechanical seal. Bronze impeller, flanged end connections 125mm suction & 100mm return union connections, Horse power: 10 HP,7.5 Kw, Phase: III phase 400V, FLOW CONDITIONS =125m³/hr @ 13 m water head. with 5 year warranty ( MAXIMUM POWER CANNOT BE MORE THAN 10HP & IT MUST BE IE3 MOTORS) etc complete all as specified and directed.Recirculation Pump( 5 Duty/ 1 Standby) |
| 43 | Supply and fixing of Adjustable Floor Inlet -2\\" threaded connection- Flow 9-12m3/h with topsurface to match with tile floor etc complete all as specified and directed. |
| 44 | Supply and fixing of Square Main Drain Frame & Grille in SS 500x500mm for a FLOW of 100m3/hr. etc complete all as specified and directed. |
| 45 | Supply and fixing of Square Main Drain- Frame & Grille in ABS 225 x 225mm 20 cu mtr/hr acting as over flow fitting etc complete all as specified and directed. |
| 46 | Supply and fixing of ABS plastic deck grating of 300mm width, inter locking type, single spine etc complete all as specified and directed. |
| 47 | Supply and fixing of Grating support profile. Suitable for grating heights of 35 mm. Made of weather resistant plastic., 1.5 m strips. etc complete all as specified and directed. |
| 48 | Supply of stainless steel ladder 5 step made of SS304 with non slip surface, 500mm wide with hand rails. Over flow type etc complete all as specified and directed. |
| 49 | Supply and fixing of electronic chlorine dosing system 20LPH @ 5 BAR with pH controller and necessary pumps, along with 500 LTR mixing tanks and 900MM manual agitators etc complete all as specified and directed. |
| 50 | Supply and fixing of deep bag leaf rake with suitable aluminum handle,remove floating materials with one set of straight and curved brushes and sidewall brush, manual vacuum head, extendable handle with all accessories for pool cleaning. etc complete all as specified and directed. |
| 51 | Supply and fixing of test kit for manual measuring of residual chlorine and pH value.etc complete all as specified and directed. |
| 52 | Supply and fixing of Trolley mounted 'Kirlosker' make centrifugal pump set 3HP, 3 Phase 415 V directly coupled with motor on suitable angle iron frame work provision of small switch board comprising of ICTPN 32 Amps, DOL starter of suitable capacity and control wiring with copper cable.etc complete all as specified and directed. |
| 53 | Supply and fixing of Commercial VGE UV system Model VGE pro 600-219 is designed to work at Medium pressure capable to dose UV at a rate of 400J/m2. The unit shall be made of SS316L body with U shape irradiation reactor chamber with 6 BAR maximum pressure rating. The unit shall be capable to work around 140 cumtr/ hr flow with a 125mm connection. The unit shall used AOP , Advanced oxidation processes . The UV comes with control panel and monitor with sensors to check UV & temperature. The units UV Lamp shall be placed to perpendicular to the direction of flow. The Lamp base shall be equipped with SMART PIN TECHNOLOGY where the lamp shall be removed when the system is pressurised. The UV lamp expected life time shall be 16000 hrs. The end connections shall be of 125mm dia SS flanges. etc complete all as specified and directed. |
| 54 | M&L for providing and fixing one piece ribbed extrusion of heat treated, aircraft grade aluminium alloy, non slip surface spring board of 14' to 16' length used in olympic size swimming pool fixed at 5m height complete all as per manufacturer's instructions. etc complete all as specified and directed. |
| 55 | M&L for providing and fixing one piece ribbed extrusion of heat treated, aircraft grade aluminium alloy, non slip surface spring board of 14' to 16' length used in olympic size swimming pool fixed at 7m height complete all as per manufacturer's instructions. etc complete all as specified and directed. |
| 56 | M&L for providing and fixing one piece ribbed extrusion of heat treated, aircraft grade aluminium alloy, non slip surface spring board of 14' to 16' length used in olympic size swimming pool fixed at 10m height complete all as per manufacturer's instructions. etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 31 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 33 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender