Tender For Periodical Services To Perimeter Wall/ Boundary Walls, Compound Walls, Steel Gates Etc At Various Sectors Of Chandigarh Under Aor Of Ge (I) R&D Chandigarh
Tender Value
16.30 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
9 days left
EMD
32600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services To Perimeter Wall/ Boundary Walls, Compound Walls, Steel Gates Etc At Various Sectors Of Chandigarh Under Aor Of Ge (I) R&D Chandigarh
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for 15 mm thick in cement mortar 1:4 and finished even and smooth without using extra cement and treating the surfaces with existing finishes to match with existing up to G+5 floor buildings including Taking down cement plaster/ loose tiles in small patches as per site requirement in any situation / locatioon on brick or stone walls, RCC surfaces such as walls, ceiling, chajjas, beams, columns etc. (internally or externally) including raking out joints, hacking for key, scrubbing down with water, etc. and complete all as specified and directed, cost of scaffolding and all safety measures shall deemed to be included in the unit rate quoted. |
| 2 | Preparation of old brick or concrete/kerb stone surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified in clause 17.3,17.4,17.5 & 17.9 &17.10 of SSR Part-I and Clause 17.2 of SSR Part -II complete all as specified and directed. |
| 3 | Material and labour for writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm height with synthetic enamel paint to match existing work (Height max 12 mtr all as specified in clause 17.10 & 17.14 of SSR Part-I complete all as specified and directed. |
| 4 | Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified in clause 17.3,17.4,17.5 & 17.8 &17.10 of SSR Part-I and clause 17.2 of SSR Part -II complete all as specified and directed. |
| 5 | Preparing new or old painted surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying two coat of weather proof acryic emulsion paints, exterrior grade (100% acryic) on surfaces of walls with applying wall care putty 2 mm thick (average thickness) in multistoried buildings three to five floors with and including requisite scaffolding and all necessary safety precuations and jhula arrangement all as specified in 17.3,17.4,17.5 & 17.6 & 17.17 of SSR Part-I and clause 17.2 of SSR Part -II complete all as specified and directed. |
| 6 | Preparing old painted surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying one coat of weather proof acryic emulsion paints, exterrior grade (100% acryic) on surfaces of walls in multistoried buildings three to five floors with and including requisite scaffolding and all necessary safety precuations and jhula arrangement all as specified in 17.3,17.4,17.5 & 17.6 & 17.17 of SSR Part-I and clause 17.2 of SSR Part -II complete all as specified and directed. |
| 7 | Demolition of brick or stone masonry work, built in cement mortar incl all quoinns, arches, pillars etc but excluding ashlar facings, dressed stone work complete all as specified and directed. |
| 8 | Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 9 | All as per serial item No 08 above except bricks complete all as specified and directed. |
| 10 | Dismantling of wrought iron mild steel work of any description or from any position complete all as specified and directed. |
| 11 | Supply and fixing for framed work such as grills, gratings etc wth ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred ,iron doors,Ms Plain sheet, XPM, ladders, framed balusters, walk way, railings, framedwork of water tanks and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed. |
| 12 | Taking down carefully existing grill (of any description) from walls/compound wall of any height by demolition the portion of embedded PCC or brick work and refixing the same in same/other location as ordered as per site requirement complete all as specified and directed.NOTE:- PCC for embedding in refixing shall be paid for separately under appropriate item herein. |
| 13 | Preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 14 | Material and labour for PCC (1:2:4) type B-1using (20mm graded stone aggregate) as in bed blocks, hold fasts and coppings as in brick wall duly rounded or chamfered on edges and finishing on roof surface / chajja (thickness of concrete will be provided as per site requirement up to five storey incl necessary sccafolding with and including demolition of old PCC and dispose of the debris /material from MoD land complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender