Tender For Work Of Installation Of Ac In The Remaining Courtroom And Chamber Of The District Judge And Additional District Judges In Chandausi, District Court, Sambhal.
Tender Value
14.12 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
4 days left
EMD
1.42 Lakhs
Bank guarantee accepted
Document Fee
766
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sambhal → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work Of Installation Of Ac In The Remaining Courtroom And Chamber Of The District Judge And Additional District Judges In Chandausi, District Court, Sambhal.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and installation ,testing and comissioning of air cooled high wall split type Air - conditioners complete with indoor unit (IDU) ,Out Door Unit (ODU) ,surface/consealed copper refrigent piping with insulation (closed cell elastomeric nitile rubber tubler pipe section ) up to 3 ntr (IDU to ODU),copper power cable up to 3.5mtr. (IDU to ODU) I/C Drain pipe R-32/R-410 /R-407 Green Refrigerant ,wire less remot controll suitable for working 180-260 volt with Low and High Voltage cut off and 50 HZ ,1 PHASE AC Supply capable of performing cooling dihumidification ,air circulation of following capacity with scroll/ rotary compressor.. The system shall be able to deliver 100 % of rated capacity up to 42 0C min.5 year original Equipment (OEM) warranty both compressor and PCB must comply electrical cable IS 694 OR IS 9968 TEMPERATURE sensing controll /IS/IEC(60730)Hermetic comprassor IS (10617),HEAT Exchanger IS 11329,CAPACITOR IS(2993)and Motor IS 12615 ,complete as per CPWD SPECIFICATION and IS:1391 part-II 2023.The system shall be able to diliver up to 52 Degree. (out door Ambient Temrature).2.0 TR. with 5 Star BEE Rating. (Inverter Type cooling only.(Make:- Carrier, Panasonic, LG, Blue Star) |
| 2 | Supply and installation ,testing and comissioning of air cooled high wall split type Air - conditioners complete with indoor unit (IDU) ,Out Door Unit (ODU) ,surface/consealed copper refrigent piping with insulation (closed cell elastomeric nitile rubber tubler pipe section ) up to 3 ntr (IDU to ODU),copper power cable up to 3.5mtr. (IDU to ODU) I/C Drain pipe R-32/R-410 /R-407 Green Refrigerant ,wire less remot controll suitable for working 180-260 volt with Low and High Voltage cut off and 50 HZ ,1 PHASE AC Supply capable of performing cooling dihumidification ,air circulation of following capacity with scroll/ rotary compressor.. The system shall be able to deliver 100 % of rated capacity up to 42 0C min.5 year original Equipment (OEM) warranty both compressor and PCB must comply electrical cable IS 694 OR IS 9968 TEMPERATURE sensing controll /IS/IEC(60730)Hermetic comprassor IS (10617),HEAT Exchanger IS 11329,CAPACITOR IS(2993)and Motor IS 12615 ,complete as per CPWD SPECIFICATION and IS:1391 part-II 2023.The system shall be able to diliver up to 50% (out door Ambient Temrature).1.5 TR :with 5 Star BEE Rating. (Inverter Type cooling only.(Make:- Carrier, Panasonic, LG, Blue Star) |
| 3 | S/F Of 5 KVA Voltage Stabliser HLC + TDR 120V-280V for 2.00 TR |
| 4 | S/F Of 4 KVA Voltage Stabliser HLC + TDR 120V-280V for 1.5 TR |
| 5 | SITC of suction /Discharge Copper Refrigrent piping in Split A.C unit 1.8/2.0 ton. Capacity including Brazing,NitrilRubber insulation 9 mm thick class o etc complete 3/8\\"(9.5 mm) and 5/8 \\"(15.90 mm). For 2.0 Ton |
| 6 | SITC of suction /Discharge Copper Refrigrent piping in Split A.C unit 1.5 ton. Capacity including Brazing,NitrilRubber insulation 9 mm thick class o etc complete 1/4\\"(6.4 mm) and 1/2 \\"(12.70 mm). |
| 7 | S/F of Iron Angle Stand for outdoor unit of 1.5 and 2.0 TR Split Air Conditioners |
| 8 | S/L of Lead 2.5 Sq mm 3 core Flexible copper Lead. |
| 9 | PVC Drain piping for condense Waste water (20 mm Dia) complete with Cliping Accessories.(without GST) |
| 10 | Supply and febrication and Installaion of M.S Cage for protection of out door unit from animal and theft L X W X H 1300 X 600 X 1200 mm Complete inn all respect. |
| 11 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 12 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.size.2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 13 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.120 sq. mm 3.5 core (Main building G. Floor Panel to TRANSFORMER ) |
| 14 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.50 sq. mm 4core (Main building G. Floor Panel to TPNDB-) |
| 15 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Size.3,1/2 X 95 sq. mm |
| 16 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Size.3,1/2 X 50 sq. mm |
| 17 | Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B OnlyIncoming 100 Amp. MCCB-1 Nos.Outgoing 63 Amp. MCCB-2No.,Cat B |
| 18 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). size 4 way (4 + 12), Double door |
| 19 | S&F of 63 Amp 4 pole MCB (10 KA) C curve CAT-A |
| 20 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 21 | S&F single pole MCB blanking plate CAT-A |
| 22 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 23 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 24 | Supply and fixing of shock treatment chart (prescribed under I.E. rules) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T&P for proper completion of work. |
| 25 | Providing and fixing H.T. danger notice plate of 250mm X 200 mm, made of mild steel, at least 2 mmthick, and vitreous enamelled white on both sides,and with inscription in single red colour on front sideas required. |
| 26 | Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality. |
| 27 | Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender