Educational and Research Institute Statutory Bodies & Commissions/Committees Closing in 14 days TDR #56973931

Tender For Department Of Basic Engineering

Issued by Statutory Bodies & Commissions/Committees · Tiruchirappalli, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Aug 2026
14 days left
EMD
5500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruchirappalli → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Department Of Basic Engineering , Basic Engineering , Digital Tds Meter Range 0-9990 Ppm, Resolution 1Ppm, Digital Lcd Display, Atc Feature. , Electronic Analytical Balance Least Count: 0.0001 G (0.1 Mg) Capacity: 100-300 G (Commonly 200 G) Display: Digital Lcd Draft Shield: Glass Enclosure Provided Calibration: Internal / External Calibration System Power Supply: Ac Mains With Adapter , Electric Bunsen Burner Maximum Temperature Up To 800 Degree C, Power Supply 220 To 240 V, Power 350W , Water Distillation Unit Output Capacity: 2-4 Liters Per Hour Material: Stainless Steel Boiler And Condenser Heater: Built-In Electric Heating Element Power Supply: 220-240 V Ac, 50 Hz Cooling: Water-Cooled Condenser Safety: Automatic Low Water Cut-Off , Battery Eliminator Ic Regulated, Input: 230V Ac; Output: 0-12V Dc In Steps Of 2V; Capacity: 1A Or 2A. , Voltmeter Dc Voltmeter; Range 0-10 V, Analog , Ammeter Dc (0 - 2 Amp) , Sonometer Sonometer With Meter Scale Attached Along With Knife Edge, Tuning Forks Set 256, 384, 512 Ranges, Hammer, Slotted Weight - 500 Gm Each To A Total Of 3 Kg. Brass Wire (5 M) , Travelling Microscope Least Count-0.01Mm, Magnification -10X,( Eye Piece), Vernier Scale-50Divisions, Moment-Fine And Corse Adjustment Screws For Horizontal And Vertical Axes,Objective Lens-75Mm Focal Length,Vertical Travel Range-0 To15cm,Horizontal Range- 0 To 15 Cm , Potentiometer It Features A 1-Meter To 10-Meter Constantan/Manganin Wire Stretched On A Wooden Or Sunmica Baseboard With A Millimeter Scale. It Includes 4Mm Brass Terminals, A Pencil Jockey For Contact, Wire Options (10 Wires), And A Typical Resistance Range Of 10-20 Ohms, Ideal For High-Precision Voltage Measurements. , Deflection Magnetometer Apparatus Tangent Type Magnetometer , Circular Non Magnetic Brass Box, 0 To 90 Degree On Each Side , Solar Cell Kit The Apparatus Consist Of Variable Dc Power Supply, Led, Solar Cell And Two Multimeters (Or An Ammeter And A Voltmeter). A Variable Dc Power Supply Of 0-5V. Light Source Is Provided By Led. The Illumination Intensity Of The Led Can Be Controlled , Wheatstone Bridge Kit Series Arm: Four Decade Dials In Steps Of Thousands, Hundreds, Tens, & Units Of Ohms. Ratio Arm: The Ratio Arm Of The Bridge Is Capable Of Selecting Multiplying Factor Of 0.001, 0.01, 0.1, 1, 10, 100, 1000 For Resistance Measurements. Two Press Keys Are Provided, One Marked B Is For Battery & One Marked G Is For Galvanometer One Toggle Switch Is Provided For Internal Battery A Sensitive Galvanometer Is Provided In The Bridge. , Ohms Law Verification Kit Battery Eliminator-3A, (2,4,6,8,10,12 V), Tubular Rheostat 20-3.3A, One Way Plug Key, Analog Type Dc Ammeter (0-2A), Voltmeter (0-5V), Standard Resistance Coil Of 1, 2 Ohm (2-Set) Wound On A Wooden Bobbin , Boyles Law Apparatus The Apparatus Includes The Quill Tube, A Retort Stand, A Clamp, And A Mounted Meter Scale. Quill Tube Specifications: Length: Approximately 50 Cm. Bore Diameter: Uniform Bore, Roughly 1 Mm To 2 Mm. Construction: Glass Tube With One End Sealed. Trapped Substance: A Mercury Pellet (Or Thread) Of Length 10 To 15 Cm Is Introduced To Enclose A Column Of Air. Mounting: Attached To A Half-Meter Or Meter Scale. , Compound Bar Pendulam One Meter Long Iron Stripwell Painted With Holes At A Distance Of Every 5 Cm And Also With Pair Of Brackets And A Heavy Base Table Top Stand , Helical Spring Structure: A Rigid Support Mounted On A Heavy Metal Base, Typically Cast Iron, To Ensure Stability During Tests.Springs: High-Tensile Steel Spiral Springs, Typically (Approx 25 Mm) Diameter, (100 Mm) Long.Measurement Scale: A Vertical Steel Meter Scale, Usually With (1Mm) Graduations, For Precise Deflection Measurement. Loading Mechanism: A, Typically (50G), Hook-Attached Weight Hanger At The Bottom.Pointer: A Fine Pointer Attached To The Bottom Of The Spring Moves Along The Scale.Accessories: Includes A Set Of Slotted Weights (E.G., (6Times 50G) Or Similar Sets) For Incremental Loading. , Metre Bridge Type: 1 M Length, With Uniform Wire (Resistance Wire) Material: Constantan Or Manganin (Low Temperature Coefficient) Scale: 0-100 Cm, Engraved Or Printed Base: Wooden Or Metal, Rigid, Non-Conductive Support Joints / Terminals: Brass Or Copper, Fixed For Connections 2. Galvanometer Type: Analog, Moving Coil Or Digital (For Null Detection) Range: Sensitive To Detect Micro-Ampere Currents Internal Resistance: High, Typically ~100 Ω Or As Specified 5. Cells / Power Supply Type: Leclanché Cells (1.5 V Each) Or Dc Power Supply Number: 2-4 Cells In Series (Or Supply ~3-6 V)

BOQ

Name of Work:- DEPARTMENT OF BASIC ENGINEERING
Sl. No. Item Description
1BASIC ENGINEERING
2DIGITAL TDS METER Range 0-9990 ppm, resolution 1ppm, digital LCD display, ATC feature.
3ELECTRONIC ANALYTICAL BALANCE Least Count: 0.0001 g (0.1 mg)Capacity: 100–300 g (commonly 200 g)Display: Digital LCDDraft Shield: Glass enclosure providedCalibration: Internal / External calibration systemPower Supply: AC mains with adapter
4ELECTRIC BUNSEN BURNER Maximum temperature Up to 800 degree C, Power supply 220 to 240 V, Power 350W
5WATER DISTILLATION UNIT Output Capacity: 2–4 liters per hourMaterial: Stainless steel boiler and condenserHeater: Built-in electric heating elementPower Supply: 220–240 V AC, 50 HzCooling: Water-cooled condenserSafety: Automatic low water cut-off
6BATTERY ELIMINATOR IC Regulated, Input: 230V AC; Output: 0-12V DC in steps of 2V; Capacity: 1A or 2A.
7VOLTMETER DC voltmeter; range 0–10 V, Analog
8AMMETER DC (0 - 2 Amp)
9SONOMETER Sonometer with meter scale attached along with knife edge, tuning forks set 256, 384, 512 ranges, hammer, slotted weight - 500 gm each to a total of 3 kg. Brass wire (5 m)
10TRAVELLING MICROSCOPE Least Count-0.01mm, magnification -10X,( eye piece), vernier scale-50divisions, moment-fine and corse adjustment screws for horizontal and vertical axes,objective lens-75mm focal length,vertical travel range-0 to15cm,horizontal range- 0 to 15 cm
11POTENTIOMETER It features a 1-meter to 10-meter constantan/manganin wire stretched on a wooden or sunmica baseboard with a millimeter scale. It includes 4mm brass terminals, a pencil jockey for contact, wire options (10 wires), and a typical resistance range of 10-20 ohms, ideal for high-precision voltage measurements.
12DEFLECTION MAGNETOMETER APPARATUSTangent type magnetometer , Circular non magnetic Brass box, 0 to 90 degree on each side
13SOLAR CELL KIT The apparatus consist of variable DC power supply, LED, solar cell and two multimeters (or an ammeter and a voltmeter). A variable DC power supply of 0-5V. Light source is provided by LED. The illumination intensity of the LED can be controlled
14WHEATSTONE BRIDGE KIT Series Arm: Four decade dials in steps of thousands, hundreds, tens, & units of Ohm's. Ratio Arm: The ratio arm of the bridge is capable of selecting multiplying factor of 0.001, 0.01, 0.1, 1, 10, 100, 1000 for resistance measurements. Two press keys are provided, one marked B is for battery & one marked G is for Galvanometer One toggle switch is provided for internal battery A sensitive galvanometer is provided in the bridge.
15OHM'S LAW VERIFICATION KIT Battery eliminator-3A, (2,4,6,8,10,12 V), Tubular rheostat 20-3.3A, one way plug key, Analog type DC ammeter (0-2A), voltmeter (0-5V), standard resistance coil of 1, 2 ohm (2-set) wound on a wooden bobbin
16BOYLE'S LAW APPARATUS The apparatus includes the quill tube, a retort stand, a clamp, and a mounted meter scale.Quill Tube Specifications:Length: Approximately 50 cm.Bore Diameter: Uniform bore, roughly 1 mm to 2 mm.Construction: Glass tube with one end sealed.Trapped Substance: A mercury pellet (or thread) of length 10 to 15 cm is introduced to enclose a column of air. Mounting: Attached to a half-meter or meter scale.
17COMPOUND BAR PENDULAM One meter long iron stripwell painted with holes at a distance of every 5 cm and also with pair of brackets and a heavy base table top stand
18HELICAL SPRING Structure: A rigid support mounted on a heavy metal base, typically cast iron, to ensure stability during tests.Springs: High-tensile steel spiral springs, typically (approx 25 mm) diameter, (100 mm) long.Measurement Scale: A vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement. Loading Mechanism: A, typically (50g), hook-attached weight hanger at the bottom.Pointer: A fine pointer attached to the bottom of the spring moves along the scale.Accessories: Includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.
19METRE BRIDGE Type: 1 m length, with uniform wire (resistance wire)Material: Constantan or manganin (low temperature coefficient)Scale: 0–100 cm, engraved or printedBase: Wooden or metal, rigid, non-conductive supportJoints / Terminals: Brass or copper, fixed for connections2. GalvanometerType: Analog, moving coil or digital (for null detection)Range: Sensitive to detect micro-ampere currentsInternal Resistance: High, typically ~100 Ω or as specified5. Cells / Power SupplyType: Leclanché cells (1.5 V each) or DC power supplyNumber: 2–4 cells in series (or supply ~3–6 V) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56973931
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 27-08-2026
Authority
Authority Name Directorate Of Technical Education
Work Description Tender for Department Of Basic Engineering , Basic Engineering , Digital Tds Meter Range 0-9990 Ppm, Resolution 1Ppm, Digital Lcd Display, Atc Feature. , Electronic Analytical Balance Least Count: 0.0001 G (0.1 Mg) Capacity: 100-300 G (Commonly 200 G) Display: Digital Lcd Draft Shield: Glass Enclosure Provided Calibration: Internal / External Calibration System Power Supply: Ac Mains With Adapter , Electric Bunsen Burner Maximum Temperature Up To 800 Degree C, Power Supply 220 To 240 V, Power 350W , Water Distillation Unit Output Capacity: 2-4 Liters Per Hour Material: Stainless Steel Boiler And Condenser Heater: Built-In Electric Heating Element Power Supply: 220-240 V Ac, 50 Hz Cooling: Water-Cooled Condenser Safety: Automatic Low Water Cut-Off , Battery Eliminator Ic Regulated, Input: 230V Ac; Output: 0-12V Dc In Steps Of 2V; Capacity: 1A Or 2A. , Voltmeter Dc Voltmeter; Range 0-10 V, Analog , Ammeter Dc (0 - 2 Amp) , Sonometer Sonometer With Meter Scale Attached Along With Knife Edge, Tuning Forks Set 256, 384, 512 Ranges, Hammer, Slotted Weight - 500 Gm Each To A Total Of 3 Kg. Brass Wire (5 M) , Travelling Microscope Least Count-0.01Mm, Magnification -10X,( Eye Piece), Vernier Scale-50Divisions, Moment-Fine And Corse Adjustment Screws For Horizontal And Vertical Axes,Objective Lens-75Mm Focal Length,Vertical Travel Range-0 To15cm,Horizontal Range- 0 To 15 Cm , Potentiometer It Features A 1-Meter To 10-Meter Constantan/Manganin Wire Stretched On A Wooden Or Sunmica Baseboard With A Millimeter Scale. It Includes 4Mm Brass Terminals, A Pencil Jockey For Contact, Wire Options (10 Wires), And A Typical Resistance Range Of 10-20 Ohms, Ideal For High-Precision Voltage Measurements. , Deflection Magnetometer Apparatus Tangent Type Magnetometer , Circular Non Magnetic Brass Box, 0 To 90 Degree On Each Side , Solar Cell Kit The Apparatus Consist Of Variable Dc Power Supply, Led, Solar Cell And Two Multimeters (Or An Ammeter And A Voltmeter). A Variable Dc Power Supply Of 0-5V. Light Source Is Provided By Led. The Illumination Intensity Of The Led Can Be Controlled , Wheatstone Bridge Kit Series Arm: Four Decade Dials In Steps Of Thousands, Hundreds, Tens, & Units Of Ohms. Ratio Arm: The Ratio Arm Of The Bridge Is Capable Of Selecting Multiplying Factor Of 0.001, 0.01, 0.1, 1, 10, 100, 1000 For Resistance Measurements. Two Press Keys Are Provided, One Marked B Is For Battery & One Marked G Is For Galvanometer One Toggle Switch Is Provided For Internal Battery A Sensitive Galvanometer Is Provided In The Bridge. , Ohms Law Verification Kit Battery Eliminator-3A, (2,4,6,8,10,12 V), Tubular Rheostat 20-3.3A, One Way Plug Key, Analog Type Dc Ammeter (0-2A), Voltmeter (0-5V), Standard Resistance Coil Of 1, 2 Ohm (2-Set) Wound On A Wooden Bobbin , Boyles Law Apparatus The Apparatus Includes The Quill Tube, A Retort Stand, A Clamp, And A Mounted Meter Scale. Quill Tube Specifications: Length: Approximately 50 Cm. Bore Diameter: Uniform Bore, Roughly 1 Mm To 2 Mm. Construction: Glass Tube With One End Sealed. Trapped Substance: A Mercury Pellet (Or Thread) Of Length 10 To 15 Cm Is Introduced To Enclose A Column Of Air. Mounting: Attached To A Half-Meter Or Meter Scale. , Compound Bar Pendulam One Meter Long Iron Stripwell Painted With Holes At A Distance Of Every 5 Cm And Also With Pair Of Brackets And A Heavy Base Table Top Stand , Helical Spring Structure: A Rigid Support Mounted On A Heavy Metal Base, Typically Cast Iron, To Ensure Stability During Tests.Springs: High-Tensile Steel Spiral Springs, Typically (Approx 25 Mm) Diameter, (100 Mm) Long.Measurement Scale: A Vertical Steel Meter Scale, Usually With (1Mm) Graduations, For Precise Deflection Measurement. Loading Mechanism: A, Typically (50G), Hook-Attached Weight Hanger At The Bottom.Pointer: A Fine Pointer Attached To The Bottom Of The Spring Moves Along The Scale.Accessories: Includes A Set Of Slotted Weights (E.G., (6Times 50G) Or Similar Sets) For Incremental Loading. , Metre Bridge Type: 1 M Length, With Uniform Wire (Resistance Wire) Material: Constantan Or Manganin (Low Temperature Coefficient) Scale: 0-100 Cm, Engraved Or Printed Base: Wooden Or Metal, Rigid, Non-Conductive Support Joints / Terminals: Brass Or Copper, Fixed For Connections 2. Galvanometer Type: Analog, Moving Coil Or Digital (For Null Detection) Range: Sensitive To Detect Micro-Ampere Currents Internal Resistance: High, Typically ~100 Ω Or As Specified 5. Cells / Power Supply Type: Leclanché Cells (1.5 V Each) Or Dc Power Supply Number: 2-4 Cells In Series (Or Supply ~3-6 V)
Basic Detail
Tender No GPTC/A3/579-5/2026
Bidding Type Tender
Location
City Tiruchirappalli
State Tamil Nadu
Key Dates
Publish Date 12 Aug 2026
Submission Date 27 Aug 2026
Open Date 28 Aug 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 5500
Exemption Available
Document List
BOQ_833973.xls
e5281a62-bd57-42a0-ab2a-0cf25147c735.html
Tendernotice_1 (11).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 14 days
Aug 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 15 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_833973.xls

html

e5281a62-bd57-42a0-ab2a-0cf25147c735.html

pdf

Tendernotice_1 (11).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders