Tender For Re-Tender For The Work Repairing And Renovation Of Sub-Divisional Store Building Of Santipur (A-I) Sub-Division At Mouza-Udaypur, Block-Santipur Under The Executive Engineer (A-I), Krishnagar-Ii (A-I) Division Under Core-Sector Program For
Tender Value
8 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
5 days left
EMD
16009
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nadia → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Re-Tender For The Work Repairing And Renovation Of Sub-Divisional Store Building Of Santipur (A-I) Sub-Division At Mouza-Udaypur, Block-Santipur Under The Executive Engineer (A-I), Krishnagar-Ii (A-I) Division Under Core-Sector Program For The Financial Year 2025-26.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 mtr. In ground floor. |
| 2 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. |
| 3 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height nd in any floor including removing rubbish within a lead of 75m as directed. |
| 4 | Ordinany cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any in ground floor as per relevant IS codes. Pakur variety. |
| 5 | Ordinany cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any in ground floor as per relevant IS codes. Pakur variety. |
| 6 | Brick work with first class bricks in cement mortar (1:6). In foundation and plinth . |
| 7 | Brick Work in superstructure ground floor (1:6). |
| 8 | Plaster (to wall, floor, ceiling etc. ) with sand and cement mortar including rounding off or chamfering corners, as directed and racking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor) [excluding cost of chipping over concrete surface]. with ( 1:4 ) cement mortar 10 mm thick plaster. |
| 9 | With ( 1:6 ) cement mortar. 15 mm thick plaster. |
| 10 | Neat cement punning about 1.5 mm thick in wall, dado, floor, drain ,door and window sill etc. |
| 11 | Hire and labour charges for shuttering with centering and necessary staging upto 4 metre using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works (up to roof of ground floor). 25 mm. to 30 mm. thick wooden shuttering. For Roof, Lintel , Beam etc. |
| 12 | Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrups, binders etc. including supply of rods, initial straightening of bend bars excluding coil bars and removal of loose rust (if necessary) cutting to requisite length, hooking, bending to correct shape, placing in proper position and binding with 1.626 mm (16 SWG) black annealed wire at every inter section complete as per drawing and direction including cost of wire upto 1st floor level (For Tor Steel). For works in foundation, basement & upto roof of ground floor upto 4 mtr. For tor steel / Mild steel. Other than SAIL/TATA/RINL. |
| 13 | Supplying, fitting & fixing UPVC pipes A- type and fittings conforming to IS:13592-1992 with all necessary clamps, nails including making holes in walls, floor etc. Cutting ttrenches in any soil through masonry concrete structures etc. If necessary and mending good damages including joining with jointing materials (spun yarn, Valamoid/bitumen/M-seal etc.) complete. UPVC Pipes , 75 mm dia. |
| 14 | UPVC Fittings . Shoe , 75 mm dia. |
| 15 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in- charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1956 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. ISMB - 125x75 . For structural members of specified sections weighing less than 22.5 Kg./m |
| 16 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per anufacturer's specification. In Ground Floor. Two coats . |
| 17 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 18 | Painting with best quality synthetic enamel paint of approved make (b) On steel or other metal surface : (iv) Two coats (with any shade except white) With super gloss (hi-gloss) - and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : |
| 19 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (ii) Grill weighing above 16 Kg./sq.mtr and above. |
| 20 | Supplying, fitting&fixing Industrial Troughed Aluminium sheet (excluding the supporting framework) of approved make&brand inalloy3105conforming to IS: 1254-1991 fitted and fixed with75mm&25mmSelf tappingscrew, EPDM Washer 16mm dia & 3mm th washer etc complete with150mm.end lap and one corrugation minimum side lap. (Payment tobemadeonareaof finishedwork) (Aluminium sheet to be supplied by contractor). In Roof:- With 0.71 mm thick sheet. |
| 21 | Aluminium sheet ridging fittedwith self tapping screws,EPDM washers etc complete.(Minimum 225mm end lapping).(A) 300 mm lapping each way .With 0.71 mm sheet. |
| 22 | Supplying, fitting and fixing glass reinforced polyester translucent fiberglasssheet to match withGCI Corrugation as per IS:12866-1989 in roof fitted and fixed with10mmdia \\"J\\" or \\"L\\" hook, bolts and nuts, limpet and bitumen washers and putty with150mm end lap and one corrugation minimum side lap complete. b) 2.0mm +/- 0.2 mm thick sheet.(3.25Kg/Sq.m) Natural white or tinted blue colour. |
| 23 | Removal of rubbish,earth etc. from theworking site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truckandcleaning the site inall respect as per direction of Engineer in charge. |
| 24 | Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof orwall after unscrewing bolts, nuts, screws etc.and stacking the material at site as directed. |
| 25 | Add GST @ 18% on item no :- 1 to 22. |
| 26 | Add CESS @ 1% on item no :- 1 to 23. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender