Tender For Special Repair To Certain Building No P-54/01 And 02 And P-42/01-08 At Abdul Hamid Vihar Under Ge Gwalior
Tender Value
77.50 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
18 days left
EMD
1.42 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Certain Building No P-54/01 And 02 And P-42/01-08 At Abdul Hamid Vihar Under Ge Gwalior
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: HQ CWE Jhansi Name of Work: SPL REPAIR TO CERTAIN BLDG NO P-54/01 AND 02 AND P-42/01-08 AT ABDUL HAMID VIHAR UNDER GE GWALIOR Contract No: CA NO CWE/JHA/GWL/TOKEN/61 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of cement concrete of any description and in any position reinforced concrete (re-inforcement cut to facilitate demolition) including disposal of unserviceable of mateial from site complete all as specified and as directed. |
| 3 | Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and as directed. |
| 4 | Dismantiling of stone slabs and tiles of any description or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar and removing rubbish from site complete all as specified and as directed. |
| 5 | M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and as directed. |
| 6 | Ditto all as per item no-4 above but as in skirting fixed. 1:4 CM 10mm thick plaster rendering. |
| 7 | M&L for joint free non skid ceramic coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and as directed. Colour and design of tiles as approved by GE. |
| 8 | M&L for 25mm thick PCC (1:2:4) Type B-0 using 12.5 mm graded stone aggregate as levelling course as in floor below tile etc complete all as specified and as directed. |
| 9 | M&L for digital glazed cearmic tiles, coloured tiles 400x300x 7 to 8 mm thick, designer pattern tiles, on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick rendering as backing coat in cement mortar (1:4) complete all as specified and as directed. Colour and design of tiles as approved by GE. |
| 10 | M&L for machine cut Kota stone slab flooring 20-25 mm thick (550 x 550 mm size) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:6 ) complete all as specified and as directed. |
| 11 | M&L for machine cut kota stone slab 18-20 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick rendering as backing coat in CM (1:4) complete all as specified and as directed. |
| 12 | M&L for Black Granite stone slab 16 to 18 mm thick machine cut, bedded and joined with cement and pointed with white cement (1:2) using marble dust with admixture of pigment to match over and including 20 mm thick screed bed CM (1:6) the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms including moulding rounding off the exposed edges and polishing complete all as specified and as directed. Colour and design of Granite as approved by GE. |
| 13 | M&L for RCC (1:2:4) type B-1 (nominal mix) (using 20mm graded stone aggregate) as in shelves, etc complete all as specified and as directed. |
| 14 | Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 15 | M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed. |
| 16 | M&L for PCC type B-1 (1:2:4) using 20mm graded stone aggregate as in coping, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, staging, slightly rounded or chamfered on edges, angles, kerbs and throating in roof as directed complete all as specified and as directed. |
| 17 | M&L for Plain cement Concrete type B-0 1:2:4 ( 12.5 mm graded stone aggregate) 40 mm thick average as in roof padding/ levelling finish even and smooth etc complete all as specified and as directed. |
| 18 | M & L for applying Smartcare Damp proof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof: water) and other coats to be applied undiluted. (ii) The undiluted 2nd & 3rd coatings needs to be reinforced with 40 GSM geotextile to be sandwiched between them. (iii) After that final 4th coating shall be applied. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of GE. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger and Nerolac.Notes:-(a) The work shall be executed through authorised applicator of manufacturer only.(b) Authrised Applicator shall be approved by GE before starting of work.(c) All materials shall be procured directly form manufacturer.(d) The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of GE. |
| 19 | M &L For applying water proofing treatment with the following coats :- (a) First coat of bitumen primer conforming to IS -3384 @ 0.3 Kg/sqm (b) Second Layer of APP based polymectric membrane minimum weighing 3kg /sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms /sqm ) land on primed surface by torch application complete all as specified and as directed. |
| 20 | M&L for Providing cement concrete type B1 1:2:4 using 20 mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges or water tank staging, coping etc finished even and smooth complete all as specified and as directed. |
| 21 | M&L precast cement concrete tiles of size 250mmx250mmx20mm, machine pressed as in roof/floor top , comfirming to IS -1237-1980 laid over 15mm thick screed bed in CM 1:4 and set, jointed and pointed in cement mortar in roof floors and cut and polished, with white cement and pigment with cement mortar (1:2) by mixing of chemical or equivalent complete all as specifeid and as directed by Engr-in-Charge. |
| 22 | M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4).complete all as specified and as directed. |
| 23 | Demolition of concrete (un-reinforced) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed. Note: Demolished material through out of MoD Land rate included above item. |
| 24 | M&L for Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 in sunken floor surfaces complete all as specified and as directed. |
| 25 | M&L for 15 mm thick rendering in CM 1:3 on fair faces of brick work or concrete surface and mixed with WPC finished even and smooth without using extra cement complete all as specified and as directed. |
| 26 | Supply only liquid water proofing compound. Make: Sika, Pidilite, Fosroc |
| 27 | M&L for applying two coats of two component flexible acrylic polymers modified cement based waterproof coating in sunken floors and wall joints having good compressive strength and shrikage resistance etc of Make : Dr. Fixit Pidifin 2K all as per manufacturer instructions in product brouchure equivalent in Fosroc, Sika etc complete all as specified and as directed. |
| 28 | M&L for PCC type E2 (1:5:10) with 40mm graded brick aggregate as in filling of sunken floors complete all as specified and as directed. |
| 29 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exceeding 1.5 Square metre each complete all as specified and as directed. |
| 30 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and as directed. |
| 31 | S&F Pressed steel door frames 105x60mmfor doors with one or more rebates including necessary fixing lugs MS butt hinges, lock strike plate, etc. complete, as specified, supplied and fixed. |
| 32 | S&F Pressed steel door frames 125x60mmfor doors with one or more rebates including necessary fixing lugs MS Butt hinges, lock strike plate, etc. complete, as specified, supplied and fixed. |
| 33 | M&L for PCC 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) for filling in hollow section of pressed steel frames and like complete all as specified and as directed. |
| 34 | S&F 30 mm thick Flush door shutters ,soild core construction ,with paticle board core and plywood face panels , commercial type both face is covered with decorative face veneer with lipping /frame to match and complete all as specified and as directed. |
| 35 | M & L for 35 mm thick glazed and skeleton factory made door shutters of 2nd class Hard Wood, open rebated and prepare to receive glass, guage etc (without sash bars) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc, size of members of shutters as specified complete all as specified and as directed. |
| 36 | S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 37 | M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 38 | M&L preperation of new wooden surface and applying two coat of synthetic enamel paint over one coat of pink primer on new wooden surface any description not otherwise described over 10 cm width or girth and complete all as specified and as directed. |
| 39 | M&L for Factory made single extruded WPC ( Wood polymer Composite) solid door/ window/ Ceosetory windows & Frames/ Chowkhat of size 45x85 mm comprising of virgine PVC polymer of K value 58-60 ( Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strenght of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold/ fast/lugs/SS dash Fasterners of required dia and lenght complete as per direction of GE. ( M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeetc complete all as specified and as directed. |
| 40 | S&F for factory made single extruded WPC (Wood polymer composite) solid deccrative type Flush door shuuter of size 30mm thick comprising of virgine polymer of K value 5868 ( Suspension Grade), calcium carbonate and natural fiber( wood powder/ rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 of 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strenght of 1800 N ( Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant. WPC to be laminaed with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with 100mm long stainless steel butt hinges 04 Nos with necessary full body threaded star headed counter sunk s.s screws,complete all as specified and as directed |
| 41 | S&F of 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, medium weight complete all as specified and as directed. |
| 42 | S&F of Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 43 | S&F of 200mm long aluminium anodised, barrel tower bolt of extruded section and fixed complete all as specified and as directed. |
| 44 | S&F of 150 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 45 | S&F of Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm long complete all as specified and as directed. |
| 46 | S&F of 200 mm, Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed |
| 47 | S&F for in repair Curtain rod stainless steel (Grade-304) decorative type 25 mm dia including fixing bracket and end knobs complete all as specified, complete all as specified and as directed. |
| 48 | S & F of windows made of pre-painted steel (Base steel as per IS-513 of 0.58mm minimum thick \\"D\\" Quality galvanized as per IS-277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted as a polyster paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars / grills fly mesh shutter section should be of 20-40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap, Elixir or equivalent stay, handles 2 Nos of heavy-duty stainless steel pivot hinges be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and SS mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/ masonry wall by means of self-expanding, screws including 10mm sqaure guard bars with 6\\" (152.4mm) pitch etc complete all as specified and as directed. Make : NCL ECO-4000 series windows. |
| 49 | S & F of ventilators made of pre-painted steel (Base steel as per IS-513 of 0.58 mm minimum thick \\"D\\" Quality galvanized as per IS-277 with Zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 48x50mm, centre mullion should be of 48x50mm, section for shutter should be of 52x 25mm and rebate for Glazed shutter with a 20mm provision for Guard bars/Grills. The sections are to be cut to length mitre joined with corner bracket. Centre mullion is to be fixed with mullion cap. Handle, stay, 2 Nos of Stainless Steel heavy duty Pivot hinges shall be provided per shutter the windows fitted with 4mm thick plain float glass with rubber gaskets including fixing the frames in concrete/ masonry wall by means of self expanding screws, Including fixed panel beading section should be of 12x12mm. Outer frame mullions to have 10mm Square guard bars with 6'\\" (152.4mm) pitch etc, complete all as specified & directed. Make : NCL ECO-3000 series windows |
| 50 | Taking down cement or cement lime plaster on wall/ceiling/roof on brick/concrete/stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed. Note: Demolished material will be thrown out of MoD Land, rate is included in above item. |
| 51 | M&L for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 52 | M&L for 15mm thick cement plaster with ready mix plaster (as per manufacturers instruction) on brickwork and concrete surfaces finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 53 | M&L for 5-10 mm thick rendering with ready mix plaster (as per manufacturers instruction) on ceiling, chajja, roof projection and facia surface finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 54 | M&L washed stone grit plaster on exterior walls in two layers, under layer 12 mm thick cement plaster 1:4 (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 kg of cement per square metre, top layer 15 mm cement 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size) in pannels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete all as specified and as directed (Payment for providing grooves shall be made separately). |
| 55 | M and L forming groove of uniform size 15 mm wide and 15 mm deep in top layer of washed stone grit plaster as per approved pattern using wooden battens nailed to the under layer including removal of wooden battens , repair to the edges of panels and finishing the grooves complete etc |
| 56 | M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper (acrylic), over and incl a layer of 2mm thick wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. |
| 57 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed. |
| 58 | M&L for preparation of the newly plastered surfaces of wall & applying two coats of cement base paint over one coat of exterior weather proof 1mm thick wall care putty on wall surfaces complete all as specified and as directed. |
| 59 | Material and labour for Preparation of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying two coat cement base paint of exterior weather proof wall care putty 1mm thick on wall surfaces complete all as specified and as directed. |
| 60 | M&L for complete removal of existing treatment of plastered or unplastered surfaces walls and applying two coat of oil bound distemper (acrylic) over a coat of 1mm thick wall care putty on walls complete all as specified and as directed by Engineer -in-Charge. |
| 61 | M&L for complete removal of existing treatment of plastered or unplastered surfaces of ceiling and applying two coat of white wash complete all as specified and as directed. |
| 62 | Dismantling boarding any description fixed with nails in any position (including cup board/ wardrobe shutters/shelves upto 25mm thick) complete all as specified and as directed. |
| 63 | M & L for 18-19 mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work with decorative face veneer on both faces complete all as specified and as directed. |
| 64 | M & L for 12 mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work with decorative face veneer on both faces complete all as specified and as directed. |
| 65 | S&F of modular soft auto closed SS hinges of any degree opening, complete all as specified and as directed. |
| 66 | S&F of modular stainless steel handle 200mm complete all as specified and as directed. Make : Godrej/ Sleek/ Hettich/ Ebco |
| 67 | S&F of modular stainless steel handle 150mm complete all as specified and as directed. Make : Godrej/ Sleek/ Hettich/ Ebco |
| 68 | S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with steel screw, complete all as specified and as directed. |
| 69 | S&F 15x20x4 Inch stainless steel kitchen basket with stainless steel (Grade-304) wire perforate plate fabricated and stainless steel telescopic drawer chanel with ball bearing soundless complete all as specified and as directed by GE. |
| 70 | Taking up or down steel tubing and connections 15mm bore of pipe, complete all as specified nd as directed. |
| 71 | Taking up or down steel tubing and connections 20mm bore of pipe, complete all as specified nd as directed. |
| 72 | Taking up or down steel tubing and connections 25mm bore of pipe, complete all as specified nd as directed. |
| 73 | Supply and laying of 20mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall with clamps or laid in floors complete all as specified nd as directed. |
| 74 | Supply and laying of 25mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall with clamps or laid in floors complete all as specified nd as directed. |
| 75 | S&F of Rotational moulded polyethylene multilayer water storage tanks white colour (cylinderical vertical with closed top) 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position including taking out old tank any type complete all as specified and as directed by Engr-in-Charge. |
| 76 | S&F in repairs for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in 20mm dia pipe. (Minimum weight 15mm-142gms, 20mm-210gms, 25mm-455gms, 40mm-690gms) complete all as specified and as directed. |
| 77 | S&F in repairs for gun metal globe/gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and as directed. |
| 78 | S&F in repairs for vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps 100mm dia and connection to trap and to flushing pipe to complete and making good to floor, complete all as specified and as directed. |
| 79 | S&F in repair for PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float end handle handle including bracket complete of capacity 10 litres, complete all as specified and as directed. |
| 80 | S&F in repair flush pipe fixed to w.c, incl all joints, of polythylene of low or high denisity or PVC 32 mm dia for low level cistern complete all as specified and as directed |
| 81 | S&F for in repairs 15mm angle cock chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified and as directed. |
| 82 | S&F in repairs for shower rose brass chromium plated without swivel joints, 125 mm in size including fixing to steel pipe complete all as specified and as directed fixed in repairs, complete all as specified and as directed. |
| 83 | S&F for in repairs 600x450 mm looking mirror of selected quality glass mounted on 4mm thick PVC building board or commercial plywood and fixed to wooden plug with chromiun plated screws complete all as specified and as directed |
| 84 | S&F for in repairs of vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps,waste, chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets complete all as specified and as directed. |
| 85 | S&F Brass CP WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe including taking out old any type complete all as specified and as directed. |
| 86 | S&F for in repairs waste coupling fittings, brass chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly nuts, flange end bedded in red lead cement and other fixed 32 mm dia bore complete all as specified and as directed. |
| 87 | S&F for in repairs waste coupling fittings, brass chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly nuts, flange end bedded in red lead cement and other fixed 40 mm dia bore complete all as specified and as directed. |
| 88 | S&F in repairs 32mm dia ribbed PVC waste drain pipe for WHB, urinal etc, strached length 90cm with PVC coupling socket complete all as specified and as directed |
| 89 | S&F in repair for 15mm dia PVC connection with PTMT nuts of length 600 mm, heavy duty, steel wire mesh coated complete all as specified and as directed. |
| 90 | S&F for in repairs mild steel Chromium plated grating 100 mm dia, fixed in repairs to Nahani traps, with/without hole complete all as specified and as directed. |
| 91 | S&F for in repairs for 15mm, bib tap Fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and as directed |
| 92 | S&F for in reairs PVC bath room cabinet mirror of Size 500mmx400 mm make Prayag Cat No 556 or euivelent in other make complete all as specified and as directed. |
| 93 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket and guard and railing 60cm long completed all as specified and as directed |
| 94 | S&F in repairs corner glass shelf 300mm (with ABS Bracket ) complete all as specified and as directed. |
| 95 | S&F in repairs Soap dish of CP fixed with pvc rawal plugs and screw, complete all as specified and as directed. |
| 96 | S&F in repair brass cromium plated tubular towel rail D type 20mm dia and 60cm long complete all as specified and as directed. |
| 97 | S&F in repairs for wall mixer with Three in one pattern in of brass CP, 15mm dia complete all as specified and as directed. |
| 98 | S&F in repair plate rack of size 900mmx750mm made out of 1mm thick stainless steel sheet of 304 AISI grade of wire type / sheet pattern size and type as directed and approved by GE fixed to wall with necessary SS screws/plugs/brackets etc fitting arrangement complete all as specified and as directed. |
| 99 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 100 | S&F in repairs Brass CP Single lever Sink mixer, 15mm bore with swinging sprout on upper side with connecting Legs & Wall Flangers screwed down for 15mm bore iron pipe complete all as specified and as directed. |
| 101 | Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) of any description and in any position including all fittings, heads, shoes, bend, swan necks etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed |
| 102 | S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls with clamps complete all as specified and as directed |
| 103 | S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls with clamps complete all as specified and as directed |
| 104 | S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed |
| 105 | S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed |
| 106 | S&F for 110mm dia PVC (SWR) pipe bends any radious complete all as specified and as directed. |
| 107 | S&F for 75mm dia PVC (SWR) pipe bends any radious complete all as specified and as directed. |
| 108 | S&F for 110mm dia PVC (SWR) pipes junction single (single T/Y) equal or unequal any radious with access door complete all as specified and as directed. |
| 109 | S&F for 75mm dia PVC (SWR) pipes junction single (single T/Y) equal or unequal any radious with access door complete all as specified and as directed. |
| 110 | S&F for SWR bends 75mm provided with access door complete all as specified and as directed. |
| 111 | S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and as directed. |
| 112 | S&F Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia around iron stays including bolt and nuts for securing ends of stays to walls or roofs, bore pipe 100/110 mm dia pipe complete all as specified and as directed. |
| 113 | S&F Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia around iron stays including bolt and nuts for securing ends of stays to walls or roofs, bore pipe 75 mm dia pipe complete all as specified and as directed. |
| 114 | M&L for PVC (SWR) gully trap 125 /100 plain with CP grating incl. jointing with solvent cement as in repair, complete all as specified and as directed. |
| 115 | M&L for reinforced cement concrete Design mix M-20 ( using 20 mm graded stone aggregate ) as in chajja/fascia/balcony slab like etc. complete all as specified and as directed. |
| 116 | M&L use and waste formwork to chullah hoods, chajjas, troughs and similar items including edges of concrete rough finished surfaces of concrete complete all as specified and as directed |
| 117 | M&L for mild steel TMT bars, 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and as directed. |
| 118 | M&L for 75mm thick PCC (1:3:6) Type C2 using 40mm graded stone aggregate as in plinth protection/hard standing and floor finishes surface even and smooth without using extra cement complete all as specified and as diected |
| 119 | M&L for Forming Construction joint 30mm deepx10mm wide filled with sealing compound grade A complete all as specified and as diected. |
| 120 | S&F, in repair, bottle trap of PTMT having minimum water seal of 25mm ( Minimum weight 32 mm -260gms ) complete all as specified and as directed. |
| 121 | Excavation in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in soft/loose soil. |
| 122 | M&L PCC 1:4:8 Type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 123 | S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161 1979 grade complete all as specified and directed. |
| 124 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed. |
| 125 | M&L for Hard core of gauge n exc. 63 mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 126 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 127 | M&L for providing and laying at near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 128 | M&L for preparation for new cement concrete, brick curve stone, asbestos cement for surfaces and applying two coat of synthetic enamel paint any description or plain or moulded, over 10 cm width or girth when unconnected with other painting or when painted in a different tint complete all as specified and as directed. |
| 129 | Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed. |
| 130 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and as directed. |
| 131 | Taking down ceiling fan/Exhaust fan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging/refixing the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed. |
| 132 | Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and as directed. |
| 133 | Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete, all as specified and as directed by Engr-In-Charge. |
| 134 | Taking down unserviceable TPN DB with MCB's of any make/capacity, complete all as specified and as directed by Engr-In-Charge. |
| 135 | M&L, concealed point wiring modular with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made suitable for modular fittings for mounting switch, regulators etc with and including plastic sheet with cover suitable for modular (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete for the following |
| 136 | One light point controlled by one switch. |
| 137 | One Ceiling fan point controlled by one switch. |
| 138 | One Exhaust fan point controlled by one switch. |
| 139 | One Bell/Buzzer point controlled by one way 5 Amp push button switch. |
| 140 | One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch. |
| 141 | One 3 pin/5 pin switch socket outlet, 5 Amps on independent board. |
| 142 | For one light point controlled by 2- two way switch |
| 143 | Description all as per item No 134 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire. |
| 144 | S&F Modular switch 1 way 6A,1 module complete all as specified and as directed. |
| 145 | S&F Socket, 6A - 2/3 pin combined 2 module, complete all as specified and as directed. |
| 146 | S&F Modular switch 1 way 16A,1 module 15 Amp complete all as specified and as directed. |
| 147 | S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed. |
| 148 | S&F Fan step regulator, 120W - 2 module 240 volts, AC 50Hz complete all as specified and as directed. |
| 149 | S&F modular bell push flush type, 5 Amps complete all as specified and as directed. |
| 150 | S&F of electric bell , AC, 230 Volts, single pole complete all as specified and as directed. |
| 151 | S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and as directed. |
| 152 | S&F Modular switch 2 way 6A, 1 module complete all as specified and as directed. |
| 153 | S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete all as specified and as directed. |
| 154 | M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 155 | Description all as per item No 148 here in before but Submain with 6 sqmm wire. |
| 156 | S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting ,Efficiency >100 lumen /watt incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and as directed. |
| 157 | S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 10 watt, 6500K fitting ,Efficiency >100 lumen /watt incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and as directed. |
| 158 | S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp complete all as specified and directed. |
| 159 | S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 100 Amp,4 pole & Including MCCB 100 amps 4 pole 16 KA complete. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as directed. |
| 160 | S&F MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and as directed. |
| 161 | S&F, MCB SPN 40 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and as directed. |
| 162 | S&F, MCB SP 240 volts, 6 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs complete all as specified and as directed. |
| 163 | S&F, MCB SP 240 volts,40, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed. |
| 164 | S & F LED light fitting 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 165 | M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and as directed. |
| 166 | Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area of following 25 Sqmm 4 Core. |
| 167 | Excavation in trenches n exc. 1.5 m wide and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 168 | Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and as directed. |
| 169 | Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed. |
| 170 | Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and as directed. |
| 171 | Supplying and laying reinforced precast concrete cable cover Class LV, Type I, flat, size 250 mm x 150mm x 40mm |
| 172 | S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and as directed. |
| 173 | S&F tube Medium' grade galvanised with all fitting laid in trenches, of 25 mm dia complete all as specified and as directed. |
| 174 | S&F tube Medium' grade galvanised with all fitting fixed to wall/floor, of 20 mm dia complete all as specified and as directed. |
| 175 | S&F gun metal gate valves with iron wheel head screwed at both ends for iron pipes of 25 mm dia complete all as specified and as directed. |
| 176 | S&F gun metal gate valves with iron wheel head screwed at both ends for iron pipes of 20 mm dia complete all as specified and as directed. |
| 177 | Cutting of existing Cast iron pipes in position for insertion of new tees, for branch connection of 25 mm dia from bore of pipe existing CI pipe. |
| 178 | Supply & fix PVC fresh air fan AC single phase 230/ 240 V of size 250 mm sweep with louve complete all as specified and as directed Total in Figures 23 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender