Tender For Special Repair To Building No T-05 (Patient Cook House) At Mh Danapur Cantt
Tender Value
38.32 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
18 days left
EMD
76640
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No T-05 (Patient Cook House) At Mh Danapur Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of plain cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | Dismantling of floor, hearth or walls tiles including cement mortar bedding but not backing and rubbish off permises complete all as specified and directed. |
| 3 | Dismantaling of Asbestos cement/GI (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 4 | Dismantaling of timber scantling 40 sqcm and over in section frarmed work in any positon complete all as specified and directed. |
| 5 | Dismantling wall and ceiling board (fiber, pulp, PVC, insulation etc) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and directed. |
| 6 | Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc |
| 7 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete. |
| 8 | Dismantling water tanks and removing to store of capacity n.exc 500 ltrs all as specified and directed. |
| 9 | Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) n. exc 1.5 Sqm each all as specified and directed. |
| 10 | Sams as bove item No 9 but exc 1.5 Sqm and n.exc. 4 Sqm each. |
| 11 | Taking down shutter of any description exc 1 sqm and n exc 2 sqm each and removing to store. |
| 12 | M&L for providing precast cement concrete of RCC 1:2:4 type B-1 (using 20mm graded stone agg) for landings, chajjas, shelves and similar articles with plain faces etc. with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match the shade set in CM 1:4 including necessary form work complete all as specified and directed. |
| 13 | M&L for 10mm thick Light shade vitrified ceramic tiles in floors, not exceeding 0.36 sqm over and including 15mm thick screed bed in cement mortor 1:6 set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified & directed. |
| 14 | M&L for 10mm thick Light shade vitrified ceramic tiles, not exceeding 0.36 sqm as on vertical surfaces skirtings, dados etc, over and including 10 mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed. |
| 15 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm & not exceeding 0.18 sqm in floors etc over and including 15mm thick screed bed in CM 1:6 set & jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles complete all as specified and directed. |
| 16 | M&L for glazed ceramics coloured tiles of size 450x300x7mm thick on vertical surfaces such as skirting/dados/wall, etc over and including 10mm thick rendering in cmeent mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed. |
| 17 | M&L for 20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 18 | M&L Machine cut kota stone slab flooring 20-25mm thick laid over and including 20mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed. |
| 19 | M & L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade including 15mm thick rendering in CM 1:4 complete all as specified and directed. |
| 20 | M & L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 21 | S & F Pre painted aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with tapping screw as specified and directed. |
| 22 | S & F for rolled mild steel structural steel work as in trusses in (tubular/rectangular/square) including purlins, rafter, special shaped washer etc. complete using any dia of MS pipe medium grade/angle or using ERW or induction butt welded tubes/angles conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed foregoing items if structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and directed. |
| 23 | S & F for powder coated aluminium door fame with shutter made out of following section complete fixed to position with hold fast all as specified & directed(a) chowkhat frame of size 83.50 x 44.45 x 1.87 mm thick weight @ 1.30Kg/RM(b) Style/Vertical member of size 47.62 x 44.45 x 1.90 mm thick weightn @ 0.911Kg/RM(c) Top and bottom rail of size 95.25 x 44.45 x 2.00 mm thick weight @ 1.511kg/RM(d) Middle rail of size 49.91x 44.45x 2.01 mm thick weight @ 1.072Kg /RM(e) Top panel with 5.00 mm thick tinted glass fixing with rubber gasket.(f) Bottom panel with 5 to 6 mm thick Alumnium composite panel thick with clips(g) 100 mm dia round handle disc type -02 nos & Alu tower bolt 200mm - 01 No, Hinges 04 Nos each shutter.(h) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, jointing cleat including locking arrangement. etc. |
| 24 | S & F in repair powder coating aluminium window sliding shutter three track with following specification:-(a) chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM(b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM(c) Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM(d) Partialy 0.36 mm dia stainless steel wire netting mosquito proof aperature 1.40mm with fixing arrangment.(e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket.(f) Aluminum beading and rubber gasket as per requirment as in fixing for paticle board & Glass, jointing cleat including locking arrangement. etc |
| 25 | S&F Rotational moulded polyethylene water storage tanks of 1000 litre capacity in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 26 | Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 27 | M&L 15 mm thick rendering on fair faces of brick /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as specified and directed. |
| 28 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement or as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately. |
| 29 | M&L for old size Brick work with sub- class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 30 | Supply only water proofing compound (liquid), ISI marked. |
| 31 | Taking up or down steel tubing and connections 15mm dia including cleaing for refixing or removal to store complete all as specified and directed. |
| 32 | Taking up or down steel tubing and connections 20mm diaincluding cleaing for refixing or removal to store complete all as specified and directed. |
| 33 | S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm dia complete all as specified and directed. |
| 34 | S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 20 mm dia complete all as specified and directed. |
| 35 | S&F in repairs Gun metal, globe or gate valve with iron wheel head, 25 mm bore, screwed both ends for iron pipe complete all as specified and directed. |
| 36 | Boring holes 3m deep in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50m (dia of pile 300mm) |
| 37 | M&L plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 38 | M&L reinforced cement concrete nominal mix (1:2:4) type B1 using 20mm graded stone aggreagate as in foundation, footing, foundation beams, plinth beams, bases for columns, pedestal, under reamed piles, mass concrete, etc complete all as specified and directed. |
| 39 | M&L reinforced cement concrete nominal mix (1:2:4) type B1 using 20mm graded stone aggreagate as in columns, pillars, posts, struts etc complete all as specified and directed. |
| 40 | M&L reinforced cement concrete M-25 nominal mix (1:2:4) type B1 using 20mm graded stone aggreagate as in coping, beams, cantilevers, bressummers, Lintels over 1.5m span etc complete all as specified and directed. |
| 41 | Form work to sides of concrete foundations, footings, bases of columns raft, beam sides and soffits (if any) of foundations & plinth beams and similar wk etc rough finished surface of concrete complete all as specified and directed. |
| 42 | Form work to sides of pillars, posts, struts, piers, columns stachions flat with rough finished surface of concrete complete all as specified and directed. |
| 43 | Form work to sides of concrete floor or roof beams, beam haunchings, bressummers, lintels, cantilevers, shelves including supports overhangs etc also sprays between floor beams, etc on flat with rough finished surfaces of concrete complete all as specified and directed. |
| 44 | M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips complete all as specified and directed. |
| 45 | Same as item No 44 above but 5 mm dia and over up to 10 mm dia as in stirrups, spacers and binders complete. |
| 46 | Taking down AC/PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe. |
| 47 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall/floor complete. |
| 48 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete. |
| 49 | S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and directed. |
| 50 | M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed. |
| 51 | M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed. |
| 52 | S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia complete all as specified and directed. |
| 53 | M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 54 | M & L for preparation of newly plastered surfaces of wall & concrete and applying 2mm thick wall care putty including preparation complete. |
| 55 | M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete. |
| 56 | M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of weather coat paint (apex) over a coat of primer complete all as specified and directed. |
| 57 | S & F for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed. |
| 58 | S & F for hangers 6 mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40X30 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed. |
| 59 | M & L for 8 mm thick Non asbestos fibre cement building boards fixed or laid / inserted to timber / GI / Aluminium framework with screws complete all as specified and directed. Make- Armstrong, Hunterdouglas etc |
| 60 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, & waste pipe incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm complete all as specified and directed. |
| 61 | M&L for RCC as in kitchen platform, shelves & chajjas etc 1:2:4 type B1 (using 20 mm graded stone aggregate) including necessary form work complete all as specified and directed. |
| 62 | M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed. |
| 63 | S&F in repair bib tap 15 mm bore,cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 64 | S&F in repair 15 mm bore pillar taps cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly-nuts screwed for iron pipe & fixed complete all as specified and directed. |
| 65 | S & F pressed steel frame of size 125 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed. |
| 66 | S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete all as specified and directed. |
| 67 | S & F factory made 2nd class HW 35 mm thick plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed. |
| 68 | M & L for plain cement concrete 1:3:6 type C-0 (using 12.50 mm graded stone aggregate), as in back filling of pressed steel frames and similar workd including necessary form work as required complete all as specified and directed. |
| 69 | S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 all as specified. |
| 70 | S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long. |
| 71 | S&F mild steel, 150 mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed. |
| 72 | S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 73 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 74 | S&F floor door stopper 150 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor complete all as specified and directed. |
| 75 | S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified and directed. |
| 76 | M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed. |
| 77 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 78 | S&F vitreous china WHB size 550x400 mm white flat back including PVC waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets painted with two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and directed. |
| 79 | S&F 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified. |
| 80 | M & L Hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 81 | S&F in repair mild steel conduit curtain rod with PVC coating fancy type curtain rod 25 mm dia of any colour as approved complete all as specified and directed. |
| 82 | M&L100 mm thick plain cement concrete (1:3:6), type C-2 using 40 mm graded stone aggregate as in sub base including finishing the surface rough & even for receiving kota/tiles complete all as specified and directed. |
| 83 | M&L 25 mm thick plain cement concrete (1:2:4), type B-0, using 12.50 mm graded stone aggregate as in floors including finishing the surface rough & even for receiving kota/tiles complete all as specified and directed. |
| 84 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. |
| 85 | M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed. |
| 86 | Same as item No. 85 here-in-before but one 3 pin, 5 Amp socket out let on independent board complete all as specified and directed. |
| 87 | Same as item No. 85 here-in-before but 3pin ,5amp socket out let on the same board with other switch complete all as specified and directed. |
| 88 | Same as item No. 85 here-in-before but for one 6 pin 15/16 Amps socket outlet point on an independent board with cables of size 2.50sqmm. |
| 89 | M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 4.0 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour including 4.0 Sqmm FR type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed. |
| 90 | M&L sub main wiring with two single core PVC insulated & unsheathed cable 6.0 Sqmm (nominal area) FRLS type having multi-stranded copper conductor drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring with and including 4.0 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as earth wire connected to common earth as per IS & cutting chasing for conduit & sinking for boxes & making good to walls disturbed surface & applying finishes to match existing surface complete including taking down of exsting sub main wiring complete all as specified and directed.NOTE : Two runs of 6 Sqmm and one run of 6.0 Sqmm cable and PVC conduit shall be measured as a one unit length. |
| 91 | M&L for sub main wiring with PVC insulated 1100V grade FRLS single core multi stranded copper conductor cable of size 2x4 sqmm + 1x4 sqmm as earth continuity cable passing through and including 25/20mm dia PVC conceal conduit all as specified and directed by Engr-in-Charge. Note - Two runs of 4sqmm including one run of 4 sqmm including PVC conduit shall be measured as unit length. |
| 92 | S & F for switch piano, flush type, 5 amps, single pole , one way , 230 volt complete all as specified and directed. |
| 93 | S & F for 2/3 pin, 5 Amp/ 6 Amp , socket outlet, flush type, 2 in 1 complete all as specified and directed. |
| 94 | S&F switch socket combination 2 in 1, 6 pin 16Amps multipurpose type 240 volts complete all as specified and directed. |
| 95 | S&F ceiling rose single phase , PVC poly carbonate, insulated body three terminals ISI marked complete all as specified and directed. |
| 96 | S&F sheet metal enclosure for 4 way TPN DB double door 415 Volt with 200 amp rated bus bar complete suitable for 1 x 100Amp TPN MCB as incomer and MCB SPN as outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs complete all as specified and directed. |
| 97 | Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of 4 poles and current carrying capacity 100 Amp in the DB complete with connection testing and commissioning |
| 98 | S& F for sheet metal enclousre factory made MCB DB's SPN, 12 way, double door, 240 Volts with 200 Amp rated bus bars including taking down existing unserviceable MCB DB complete all as specified and directed. |
| 99 | S&F MCB SP 240 Volt 6 TO 40 Amp ISI marked conforming to 'B\\" curve, breaking capacity 10 KA complete all as specified and directed. |
| 100 | S&F MCB SPN 40-63 amp 30mA for earth leakage. Over load and short circuit protection ISI marked complete all as specified and directed. |
| 101 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below normal ground level) connected to galavanised earth lead wire 4.0 mm dia (7.5m) as means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISImark) light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover 1:2:4 , type B-1(using 20 mm graded crushed stone aggregate ) reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade(ISI marked) for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing of earthing & dismantling /taking down existing old / unserveciable earthing complete all as specified and directed. (Note:- The rates quoted shall also deemed to include the cost of Earth test point and earth wire and protection pipe upto 7.5 meter beyond the earth plates electrode.) |
| 102 | Supply & fixing fan regulator, modular type, socket type compatible for BLDC fans ,single phase complete all as specified and directed. |
| 103 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type Extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser , 4 ft,2000lm,voltage protection range 140V -270 V,NW 4000K ,connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 104 | Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency warm type PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 105 | Supply, fixing and testing of ceiling fan 1200 mm sweep, heavy duty, single phase, AC, 230 Volts, 50Hz, BEE 5 star rating, ISI marked complete with down rod, canopy, blades, BLDC motor without remote, electronics fan regulator etc with 5 year on site warranty and connecting up complete including complete connection from ceiling rose to fan including writing of MES Number with synthetic enamel paint and depositing old fan to MES store for further BER complete all as specified and directed. |
| 106 | Supply and fixing LED lights fitting 1x 10W, 220V,AC decorative box type Extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser , 2 ft, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 107 | Supply and fix wall fan high speed 400 mm electric corded 2100 RPM air delivery 105 CMM ,input voltage 240 V sturdy base and thermal overload protectionfor safety and durability complete all as specified and directed. |
| 108 | S & f single pole and neutral encl 240 V with two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed. |
| 109 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep ,heavy duty with, blades, and frame and louvers complete all as specified. |
| 110 | S & F Building security/street LED light fitting 35 watt IP-65 protection pressure diecast alluminium body ,heat resistant glass ,including driver and making necessary electric connection with 2.5 sqmm twin core copper wire 1.5 long complete fixed in GI pipe fixed to pole complete all as specified and directed. |
| 111 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core. |
| 112 | Excavation in trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/Pole/Stays etc getting out in Soft/Loose Soil, complete all as specified and directed. |
| 113 | Returning, Filling in including Spreading, Leveling, Watering and Well Ramming in layers not exc. 25 Cm thick in soft/loose Soils, complete all as specified and directed. |
| 114 | Removing Surplus soil to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and directed. |
| 115 | M & L clean dry river sand in trenches/ducts for cushioning to cable, 8 cm in depth before laying the cable and 15 cm in depth after laying the cable complete all as specified. Note:- Punned thickness shall be measured and paid. |
| 116 | M & L for old size sub class ‘B’ bricks, laid in trenches as cable covers / protection complete all as specified and directed . |
| 117 | Supply and fix air cooled split unit air conditioner electric driven , AC single phase of capacity of 2 TR, BEE 5 star rated complete all as specified and directed |
| 118 | Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender