Tender For Special Repair To Building No T-04 And T-35 (Spwd) At Gulmarg Under Ge 969 Ews.
Tender Value
24.26 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
7 days left
EMD
48520
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No T-04 And T-35 (Spwd) At Gulmarg Under Ge 969 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering, complete all as specified and as directed. |
| 2 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 4 | Demolition of brick work, PCC block masonary, stone masonry or boulder masonary built in cement mortar, complete all as specified and as directed. |
| 5 | M & L for brick work with sub class 'B' bricks (old sizes) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, complete all as specified and as directed. |
| 6 | M&L for walling of random rubble masonary uncoursed, well bonded , bedded and solidly hearted built in CM 1:4, complete all as specified and as directed. |
| 7 | M&L for Cement concrete 1:2:4 type B1 (using 20 mm graded stone agg) as in coping including form work, complete all as specified and as directed. |
| 8 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:4 finished surfaces even and smooth without using extra cement with water proofing compound, complete all as specified and as directed. |
| 9 | Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below & above GL) unreinforced, complete all as specified and as directed. |
| 10 | M&L 75mm thick PCC (1:3:6) type C-2 using (20mm graded stone aggregate) as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement, complete all as specified and as directed. |
| 11 | M&L for 75mm thick cement concrete Type C2 1:3:6 (using 40 mm graded aggregate) as in sub floors, sub bases, floors and pavings etc, complete all as specified and as directed. |
| 12 | M&L for 25 mm thick PCC type B1 (1:2:4) using 20 mm graded agg as in flooring , complete all as specified and as directed. |
| 13 | M&L for Factory made precast coloured cement concrete interlocking tiles 60 mm thick of size and shape as directed, strength not less than that of M-35 grade concrete laid and jointed, complete all as specified and as directed. |
| 14 | M&L coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick (Premium quality), set jointed and pointed in neat cement slurry in floors with grey cement and pigment incl 15mm cement screed bed CM 1:4, complete all as specified and as directed. |
| 15 | M&L for Natural cobble stone in Pavements flooring with stone setts of size 100 mm long 100 mm wide and 100 mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush, complete all as specified and as directed. |
| 16 | Dismantling floor hearth wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the permishes, complete all as specified and as directed. |
| 17 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6), complete all as specified and as directed. |
| 18 | M & L for glazed ceramic tiles in vertical surface 350x250x7mm/450x350x7mm thick colour and design (as approved) set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over 10 mm thick cement plaster in CM (1:4), complete all as specified and as directed. |
| 19 | M&L for Granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing over and including 15mm thick screed bed in CM 1.6, complete all as specified and as directed. |
| 20 | Dismantling timber scantling 40 sq cm and over in section in any position as in unframed work, complete all as specified and directed. |
| 21 | Dismantling timber scantling under 40 sq cm in section in any position as in unframed/framed work, complete all as specified and directed. |
| 22 | M & L 2nd Class soft wood as in scantling, clean swan timber framed and fixed, complete all as specified and as directed. |
| 23 | 2nd class soft wood 20 mm thick in facia/eaves boarding fixed with nails in any situation planed one side with butt joints, complete all as specified and as directed. |
| 24 | S&F plain fillets, square, rectangular or triangular in section using second class soft wood clean swan secured with nails exc 13 sqcm but not exc 25 sqcm in section, complete all as specified and as directed. |
| 25 | S&F plain fillets, square, rectangular or triangular in section using second class soft wood clean swan secured with nails exc 6 sqcm but not exc 13 sqcm in section, complete all as specified and as directed. |
| 26 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and as directed. |
| 27 | S & F 4 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work on Ceiling, complete all as specified and as directed. |
| 28 | S & F 4 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work on wall, complete all as specified and as directed. |
| 29 | S&F 2nd class soft wood 8 mm thick and 100 mm wide plane one side with edges tounged and groove or rebated joint as in wall panelling/ceiling fixed with nail, complete all as specified and as directed. |
| 30 | M&L for 12 mm thick plywood, grade BWR type BB, fixed with nails to timber frame work in ceiling etc, complete all as specified and as directed. |
| 31 | S&F Decorative wooden tiles of size 300x300x10mm thick of second class softwood, with fixing on ceiling of nails and glue/ fevicole over a 12 mm Plywood, design and shade as approved, complete all as specified and as directed. |
| 32 | M&L 2nd Class softwood weather boarding clean swan, plain 20mm thick or feather edges 15mm to 20 mm thick and fixed with 30mm over laps, complete all as specified and as directed. |
| 33 | M&L Wooden Flooring boarding, clean sawn, plain, 30mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps Planed one side, with butt joints and fixed with nails supplied and fixed, complete all as specified and as directed. |
| 34 | All as per above item no. 33 here-in-before but except boarding, complete all as specified and as directed. |
| 35 | M&L in repair PVC hollow /perforated interlocking wall/ceiling paneling of 2mm thick prelaminated PVC sheet. The panel & strips shall be of 600 kg/chm density manufactured by an ISO-9000 certified company. The strips should two PVC strips The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement, complete all as specified and as directed. |
| 36 | Taking down chowkats with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc 4 Sqm each and offered as credit, complete all as specified and as directed. |
| 37 | All as per above item no. 36 here in before but n exc 1.5 Sqm each, complete all as specified and as directed. |
| 38 | Taking down shutters of any description area exc 1.00 Sqm and n exc 2 Sqm each, complete all as specified and as directed. |
| 39 | Taking down shutters of any description n.exc 1.00 Sqm each, complete all as specified and as directed. |
| 40 | S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed. |
| 41 | S&F Plain, framed, panelled shutters thickness 35 mm of second class softwood, (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and as directed. |
| 42 | S&F Glazed and skeleton shutters thickness 30 mm, second class softwood, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Section specified 8 clause 8.24(b), complete all as specified and as directed. |
| 43 | S&F Powder coated Anodised aluminums frame for doors, windows, ventilators with one or more rebates including joining cleat and handles and other necessary fittings for fixing etc, complete all as specified and as directed. |
| 44 | S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and as directed. |
| 45 | S & F Powder coated Anodized Aluminium window and ventilators shutters, without sash bar, aluminum section weighting 0.55kg / m including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, locking arragement,Handles etc, complete all as specified and as directed. |
| 46 | S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed, complete all as specified and as directed. |
| 47 | S&F Aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed, complete all as specified and as directed. |
| 48 | S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. |
| 49 | S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 50 | S&F M S Butt hinges 75 mm medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 51 | S&F Aluminium handles 100 mm , cast type,anodised, complete all as specified and as directed. |
| 52 | S&F Aluminium handles 150 mm , cast type,anodised, complete all as specified and as directed. |
| 53 | Hacking out broken glass any thickness, size, quality, from wooden frame/steel frames fixed with putty or with wooden beads, complete all as specified and as directed. |
| 54 | S&F Sheet glass 3 mm thick ordinary quality one way glazing with rubber gasket in square not exc 0.5 sqm each pane, complete all as specified and as directed. |
| 55 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows, complete all as specified and as directed. |
| 56 | M&L preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth applying two coats synthetic enamel paint over one coat of prink primer, complete all as specified and as directed. |
| 57 | M&L preparation of old painted surface of wood and wood based surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamal paint, complete all as specified and as directed. |
| 58 | S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish, complete all as specified and as directed. |
| 59 | S & F in repairs 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed. |
| 60 | S&F in repair Stop/angle valves 15 mm, cast copper alloy, screwed down,high pressure,with crutch or butterfly handle fancy type chromium plated, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed. |
| 61 | S&F in repairs for 15 mm bore bib taps, fancy type chormium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule, complete all as specified and as directed. |
| 62 | S&F in repair vitreous china wash basin, white flat back size 550x400 mm plug, porcelain stopper and incl brackets with waste fittings, brass, chromium plated for glazed ware basin etc with long screwed shanks and fly-nuts, flange end bedded in read lead cement and other end fixed and connection pipe etc including pedestal, complete all as specified and as directed. |
| 63 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup, complete all as specified and as directed. |
| 64 | S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubbing, complete all as specified and as directed. |
| 65 | S&F in repair brass chromium plated tubular towel rail 20 mm dia D type , 60 mm long between flages, complete all as specified and as directed. |
| 66 | S & F in repairs Brass CP wall mixer /WHB Mixer 15 mm for mixing hot & cold water screwed down for iron pipeand fixed, complete all as specified and as directed. |
| 67 | S&F in repairs CP health faucet (ABC) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook incl making connection and fixed in position, complete all as specified and as directed. |
| 68 | S&F in repairs PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed, complete all as specified and as directed. |
| 69 | S&F in repairs vitreous china wash down water closet pan ( Pedestal pattern) white or coloured excluding flushing cistern and flush pipe and seat cober incl provision of concrete/ white cementing and P or S trap, complete all as specified and as directed. |
| 70 | M&L in repair vitreous china wash down water closet pan (one piece type) ivory with PVC sheet cover & flushing cistern, flushing pipe), including making good the floor with adjacent floor finishing and making connection to flush pipe etc complete including making functional and removal rubbish/waste materials to a distance n. exc 50m, complete all as specified and as directed. |
| 71 | Taking up or down 15mm bore steel water tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 72 | Taking up or down 20mm bore steel water tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 73 | S&F 15mm bore steel water tube, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 74 | S&F 20mm bore steel water tube, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 75 | S&F in repairs corner sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard, complete all as specified and as directed. |
| 76 | S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floor or to wall, complete all as specified and as directed. |
| 77 | S&F PVC (SWR) junction single T equal or unequal 110 mm bore, complete all as specified and as directed. |
| 78 | S&F PVC (SWR) bends 110 mm dia fixed, complete all as specified and as directed. |
| 79 | S&F PVC (SWR) vent cowl 110 mm bore fixed, complete all as specified and as directed. |
| 80 | S&F PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed. |
| 81 | S&F PVC (SWR) junction single T equal or unequal 75 mm dia, complete all as specified and as directed. |
| 82 | S&F PVC (SWR) bends 75 mm dia fixed, complete all as specified and as directed. |
| 83 | S&F PVC (SWR) vent cowl 75 mm bore fixed, complete all as specified and as directed. |
| 84 | S&F stainless steel curtain rods of selective quality designed and colour shall be as directed by Engr-in-Charge. |
| 85 | Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc. |
| 86 | M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor. |
| 87 | (a) One light point/fan point/ex fan point controlled by one 5 Amps switch one way |
| 88 | (b) One 3 pin 5 Amp switch socket outlet on independent board |
| 89 | (c) One 3 pin 5 Amp switch socket outlet on same board |
| 90 | M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor complete all as specified and as directed. |
| 91 | S & F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal,complete all as specified and as directed |
| 92 | S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed |
| 93 | S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete with gang box complete all as specified and as directed. |
| 94 | S&F Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal, complete all as specified and as directed. |
| 95 | Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body complete all as specified and as directed. |
| 96 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 97 | S&F Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed. |
| 98 | Supply and fixing LED bulb 12 W, 220V suitable size from ceiling rose complete all as specified and as directed. |
| 99 | S& F LED light fitting 1x10 W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 100 | S & F MCB Single pole 6-32A Amps 240 Volts B Curve complete all as specified and as directed. |
| 101 | S & F in repairs MCB,DP 32/40 Amps 240 Volts B curve complete all as specified and as directed. |
| 102 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 103 | Supply and fixing PVC body fresh air fan with PVC blades, ISI marked, 225 mm sweep with louvers and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to fresh air fan complete in all respect complete all as specified and as directed. |
| 104 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and as directed. |
| 105 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 106 | M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc. |
| 107 | S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 2 core, complete all as specified and as directed. |
| 108 | Note:- Schedule of credit Rs 1,25,849.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender