Tender For Certain Repairs To Roof, Ceiling, Flooring, Plastering, Joinery, Tiling, Repair Of R S And Misc B/R Works At Wsa At Af Stn Awantipur
Tender Value
35 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
9 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
awantipora → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Certain Repairs To Roof, Ceiling, Flooring, Plastering, Joinery, Tiling, Repair Of R S And Misc B/R Works At Wsa At Af Stn Awantipur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-Aug-2026 | BOQ Corrigendum | BOQ | 01-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE (AF), 8FBSU,AF Name of Work: CERTAIN REPAIRS TO ROOF, CEILING, FLOORING, PLASTERING, JOINERY, TILING, REPAIR OF RAMPS AND MISC B/R WORKS AT WSA AT AF STN AWANTIPUR Contract No: GE (AF) AWA-27/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. DESCRIPTION OF ITEMS Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e. DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit, if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Dismantling of floor, hearth or wall tiling of any decryption size and thickness including cement mortar bedding (but not backing), removing rubbish off the premises etc, complete all as specified and directed. |
| 3 | Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as directed. |
| 4 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed. |
| 5 | Demolition of precast cement concrete articles laid dry as in paver blocks etc complete all as directed. |
| 6 | Demolition of plain cement concrete in ground floors and pavings n.exc. 15 cm thickness (below or above ground level) etc, complete all as directed. |
| 7 | Dismantling mild steel work of any description not otherwise provided for etc, complete all as specified and directed. |
| 8 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar coverings sheets in roof coverings including ridges etc, complete all as specified and directed. |
| 9 | Rough excavation n. exc. 1.5 m deep and getting out in any type of soil excavation of soil etc, complete all as directed. |
| 10 | Removing excavated material not exc. 1.50 Km and depositing where directed at a level not exc. 5 Km above the starting point in soils etc, complete all as directed |
| 11 | Forming embankment including raising (or lowering) earth, spreding in layers n exc. 30 cm thick, watering, ramming/rolling and finishing to required size, shape etc n.exc 3.00 m high from base etc, complete all as directed. |
| 12 | M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in cement mortar 1:6 etc, complete all as specified and directed. |
| 13 | All as per item no 11 above but except bricks |
| 14 | Cutting holes in brick walls in cement mortar or stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc. half brick but not exc one brick etc, complete all as specified and directed. |
| 15 | S&F Mild steel of conforming to Fe 290 grade E-165 as in wind ties/Hole fast fixed at eaves and ridge level etc, complete all as specified and directed. |
| 16 | S&F Mild steel of conforming to Fe 290 grade E-165 as framed work (Angles ,Flat Iron, square/ round bars) with ends of bars shouldered and/or riveted or forged into spikes for Door window/ grills/ framed guard bars to the design and pattern of ornamental and intricate as approved etc, complete all as specified and directed. |
| 17 | S&F mild steel screw bolts machine made 5 to 10mm dia with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end fitted with one washers and hexagonal or square nut n exc 5cm long etc, complete all as directed. |
| 18 | S&F mild steel rag or lewised bolts, screwed one end, the other end enlarged and jagged or lewised exc 30 cm long, dia of neck 12 mm etc, complete all as directed. |
| 19 | S&F Mild steel Fe 410-W (Grade E-250 quality-A) rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc, complete all as specified and directed. |
| 20 | S&F Mild steel Fe 410-W (Grade E-250 quality-A) plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc complete all as specified and directed. |
| 21 | S&F Mild steel Fe 410-W (Grade E-250 quality-A) as in framed roof trusses (Beam ,Tee, Angle, channel or flat sections) including distance pieces cleats or other connecting plates etc, complete all as directed. |
| 22 | S&F galvanised corrugated mild steel sheeting, with two corrugation side and roof ridge, lap fixed with L type or J type or cranked hooked bolts with washers in roof, 0.63 mm thick, grade 'O' quality, with 120 grms/sqm zinc coating and grade 'B' class 8, complete all as specified and directed. |
| 23 | All as per item No 21 above but except sheets |
| 24 | S&F galvanised plain mild steel sheeting 0.63 mm thickness fixed with L type or J type or cranked hooked bolts with washers in roof, as in ridge etc, complete all as specified and directed. |
| 25 | M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in subase finished to receive floor treatment etc, complete all as directed. |
| 26 | M&L for 75 mm thick PCC 1:2:4 type B-2 (using 20 mm graded crushed stone aggregate) as in finished to receive floor 30 mm deep joints at every 3 mtrs treatment etc, complete all as directed. |
| 27 | M & L for non skid coloured ceramic joint free glossy finish floor tiles 7 to 8 mm thick and size 400mm x 400mm (area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm) laid in floors, with and including 15 mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement to match etc, complete all as specified and directed. |
| 28 | All as per item No. 26 above but in vertical surfaces such as skirting and dado, laid over and including 10 mm thick rendering in cement mortar 1:4. |
| 29 | M&L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection 75 mm thickness, finished even and smooth without using extra cement with and including 10 mm wide and 30 mm deep joints at every 2.4 mtrs interval and at every change in direction filled with bitumastic compound etc, complete all as specified and directed. |
| 30 | M&L for machine pressed precast concrete interlocking paver block any shape and size made of grey cement with pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with and including 30 mm thick sand bedding well compacted watered and rammed to true level etc, complete all as specified and directed. |
| 31 | M&L for grey cement with pigment chequered cement concrete tiles of size 300mm x 300mm x 20mm thick set jointed and pointed in neat cement slurry in floors with and including 15 mm thick cement mortar 1:6 bedding etc, complete all as specified and directed. |
| 32 | M & L for rendering 10 mm thick internal plaster in cement mortar (1:6) on brick work or concrete surfaces, finished even and smooth etc, complete all specified and directed. |
| 33 | M & L for rendering 15 mm thick external plaster in cement mortar (1:4) on brick work or concrete surfaces finished even and fair without using extra cement etc complete all as specified and directed. |
| 34 | M & L for preparation of new plastered surfaces of walls, application of wall primer and applying three coats of white wash etc, complete all specified and directed. |
| 35 | M & L for preparation of new plastered surfaces of walls and applying two coats of color wash over a coat of white wash etc, complete all as specified and directed. |
| 36 | M & L for preparation of new steel surfaces exc 10 cm width/girth and applying two coats of synthethic enamel paint over a coat of primer etc, complete all as specified and directed. |
| 37 | All as per item no 35 above but not exc 10 cm width or girth |
| 38 | M&L for preparation of new steel or iron work or CGI/PGI sheeting in wall or roofing, over 10 cm width or girth, not otherwise described and applying two coats of synthethic enamel paint in camouflaging (Disruptive pattern in three colours (gree,grey and brown) over a coat of acrylic primer etc, complete all as specified and directed. |
| 39 | S & F in repair galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins.Note:-Each line wire to be measured. |
| 40 | Dismatling fencing wire mesh of any type |
| 41 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete, all as specified and as directed. |
| 42 | Supply only chain link mild steel galvanised fencing, any type or size complete all as specified and as directed. |
| 43 | Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 44 | Preparing old or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & and including a coat of red oxide primer complete all as specified and as directed. |
| 45 | All as per item no. 44 above but not exc 10 cm width or girth |
| 46 | Note :- An amount of Rs. 1,26,250.00 on account of credit schedule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 01, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 9 daysSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender