Tender For Provision Of Combined Toilet Bathroom At Kiari And Special Repair To Bldg No. T-321, T-91 And T-580 At Tangtse Under Ge 860 Ews
Tender Value
45.91 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
10 days left
EMD
92000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Combined Toilet Bathroom At Kiari And Special Repair To Bldg No. T-321, T-91 And T-580 At Tangtse Under Ge 860 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n.exc 15 cm deep in soft/loose soil. |
| 2 | Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed. |
| 4 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point As specified and directed. |
| 5 | M&L for Cement concrete PCC Type D-2 1:4:8(40 mm graded aggregate) in foundations,filling and mass concrete |
| 6 | M & L for RCC 1:2:4, Type B0 (Using 12.5 mm graded stone aggregate) in footing,plinth beam complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat rough finished surface of concrete omplete all as specified and directed by Engr-in-Charge. |
| 8 | M&L for RCC 1:2:4, Type B0 (Using 12.5 mm graded stone aggregate) Columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface square, rectangular complete all as specified and directed by Engr-in-Charge. |
| 10 | M&L for RCC 1:2:4, Type B0 (Using 12.5 mm graded stone aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L Formwork flat and fair finished to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels beam, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed by Engr-in-Charge. |
| 12 | M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge. |
| 13 | M & L for 6 to 8 mm dia Mild steel TMT bar in stirrups, spacers and binders complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L for Pre-cast cement concrete block masonry Type C-1 (1:3:6) 20 mm graded aggregate with solid blocks, exc. 10 cm in width and setting in mortar |
| 15 | M&L for rendering 15 mm thick on fair faces of brick work or concrete in CM 1:4 and finishing the surfaces even and smooth (without using extra cement) as specified and directed. |
| 16 | Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and to be finished even and smooth without using extra cement - Internal Plaster complete all as specified and directed. |
| 17 | M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface in broken stone or boulders complete all as specified and directed. |
| 18 | M & L PCC type B-1 1:2:4 (20 mm graded aggregate) for fixing hold fast |
| 19 | S & F MS flat iron of size 25x3 mm as in hold fast conforimg to Fe 410-0 or Fe-310-0 |
| 20 | Plinth protection 75 mm thick in PCC type C1 1:3:6 (using 20 mm graded aggregate crushed stone aggregate) laid in alternate bays (not exc 2 Sqm each) finishing even smooth at top without using extra cement and providing joints throughout the thickness of plinth protectio, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as specified and directed at site. |
| 21 | M&L for Cement Concrete type D-2, 1:4:8 (20 mm graded aggregate) 100mm thick as Sub base complete all as specified and directed. |
| 22 | M&L for 40mm thick Cement Concrete type B-1, 1:2:4 (20 mm graded aggregate) as in floor Sub base complete all as specified and directed. |
| 23 | M & L for coloured non-skid ceramic tiles 7 to 8 mm(square/rectangular) rea of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc 15 mm thick cement mortar screed bed or bedding layer in CM 1:6 complete all as specified and directed by Engr-in-charge. |
| 24 | M&L for colour glazed ceramic tiles in vertical surface 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing coat of CM 1:4. |
| 25 | M&L for Glazed and skelton Windows, ventilators shutters 30 mm thick 2nd class soft wood, open rebated and prepared to receive glass, guage, etc, divided in to square with plain, chamfered or rounded mitred and rebated sash bars, any numbers, size of members of shutters as specified in SSR Part I Section 8 clause 8.20 (b) as in windows complete all as specified and as directed. |
| 26 | S&F for 2nd Class soft wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified ans as directed. |
| 27 | M&L for 35mm 2nd class HW plain framed , panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commerical ply or 12mm veneered particle board with commerical veneering on both faces. The size of rail and stile as per IS:1003 complete all as specified ans as directed. |
| 28 | S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified. |
| 29 | S&F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified. |
| 30 | S&F 150mm Aluminium handles, cast type, anodised complete all as specified. |
| 31 | S&F 300 mm aluminium alloy anodised sliding door bolt with hasp, staple complete all as specified. |
| 32 | S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 33 | M&L 4 mm thick glass panes ordinary quality and glazing with oil putty in square n .exc 0.50 Sqm in each Pane etc complete |
| 34 | S & F steel work in roof trusses (framed ) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle,channel or flat sections) including distance pieces cleats etc |
| 35 | S&F for 0.50 mm thick Pre- painted galvatume aluminum zinc coating GI based plain in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as directed by Engr-in-Charge. |
| 36 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as directed by Engr-in-Charge. |
| 37 | M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes etc. with riveted, bolted or welded attachment confirming to Fe 410-W (Gde E-250), complete all as directed by Engieer-in-charge. |
| 38 | Mild steel bolts neck exc 10 mm dia and n exc 15 mm dia, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each scre-wed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long |
| 39 | M & L for providing two coats of synthetic enamel painting to new wood or wood based surfaces of any description, not otherwise described over 10cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed . |
| 40 | Preparing of new surface of wall of any description and applying two coats of distemper oil emulion, with one coat of primer all as specified. |
| 41 | Preparing plastered new surfaces of wall and applying two coats of cement base paint with one coat of primer all as specified. |
| 42 | S&F Rotational moulded water tank 1000 liter polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as spd and directed by engr in charge. |
| 43 | S&F 20 mm bore ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. |
| 44 | S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete including P/S traps. |
| 45 | S & F of PVC (Plastic polymer Cistern) low level white flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle etc and S & F of 32 mm dia PVC flush pipe of suitable length and making all connection complete all as specified and directed. |
| 46 | S&F 600mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick fixed on wall with wooden plugs with chromium plated brass screw & cup washer |
| 47 | S&F 15 mm dia bib tap chromium plated with cruth butterfly handle, screw down , screwed for iron pipe or brass ferrule. |
| 48 | S&F 75 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints, laid in trenches or fixed to wall complete as spd and directed. |
| 49 | S&F 75 mm dia PVC (SWR) bends any radius complete as spd and directed. |
| 50 | S&F 75 mm dia PVC floor trap , plain with grating including jointing with solvent. as spd and directed. |
| 51 | S&F Wash basins, Vitreous China size 550 x 400mm (flat back or angle back type)any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply including brackets, as spd and directed. |
| 52 | S&F Viterous China wash urinal, half stall type, white complete including providing and fixing plugs bedding urinal against wall in CM 1:2 securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement incl 32mm dia PTMT waste coupling, 32mm dia PVC waste pipe and urinal spreader complete all as specified and as directed. |
| 53 | S&F 32 mm bore waste pipe Low density polyet-hylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls,or in floors, as spd and directed. |
| 54 | S&F Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, as spd and directed. |
| 55 | S&F Stop valves 15 mm chromium plated fancy type caste copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed , as spd and directed. |
| 56 | S &F 20 mm dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) UN stablized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threated polypropylene random fittings laid in trenches etc. |
| 57 | S&F15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixe as spd and directed. |
| 58 | S&F PVC connections 15mm size with PTMT nuts of length 450mm as spd and directed. |
| 59 | Excavation over areas n.exc 1.5m deep and and getting out in hard/dense soil |
| 60 | Excavation over areas exc 1.5m deep and n.exc 3.00 m deep and getting out in hard/dense soil |
| 61 | M & L for PCC 1:3:6 type C-2 (Nominal Mix) using 40 mm graded stone aggregate as in foundation filling mass concrete and similar work complete all as specified and as directed. |
| 62 | M & L for Walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed |
| 63 | M & L for Walling of random rubble stone masonary, uncoursed, well bonded, bedded and solidly hearted, laid dry complete all as specified and directed |
| 64 | M & L for providing RCC type B-1 1:2:4 using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed. |
| 65 | M & L for rough finished Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all as specified and directed. |
| 66 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20 cm wide. |
| 67 | M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 68 | M & L for precast cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in cover slab for manhole set in CM 1:4 including necessary form work complete all as specified and directed by Engr in Charge. |
| 69 | M&L for Plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in coping, benching bed plates and the line including necessary form work and finishing all exposed surface of concrete as per clause 4.11.16.2(a) of SSR Part-I (2009) complete all as specified and directed by Engr-in-Charge. |
| 70 | M & L for loose filling with broken bricks aggregates of gauge 80 to 150 mm in soakage pit, soakage wells |
| 71 | S&F 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floors complete all as specified. |
| 72 | M&L Concrete bed 1:4:8 type D-2 to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested bore of pipe in 110 mm. |
| 73 | Supply only Integral Water proofing compound. |
| 74 | Demolition of stone/PCC block/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.. |
| 75 | M&L for Pre-cast cement concrete block masonry Type C-1 (1:3:6) 20 mm graded aggregate with solid blocks, exc. 10 cm in width and setting in mortar 1:6 but except blocks(blocks to be reused retrived from the item no 01.00) |
| 76 | Taking down cement of cement lime plaster of any description at any position on brick or stone or PCC block walls, concrete surafces etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge. |
| 77 | M&L for rendering 12mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6 |
| 78 | Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering/wall complete all as specifed and directed. |
| 79 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.Note: Taking down carefully old FTL fitting recessed mounted light fittings/ceiling complete with all accessories and making necessary electric connection, complete all as specified & directed by Engr-in charge. |
| 80 | S&F grid false ceiling GI system powder coated prelude (Main runner sec 32x24x0.30x3600mm,Cross Tee 25x24x0.30x1200 mm, wall angle 24x24x0.40x3000mm and including providing and fixing PVC pre laminated aluminium foil backed Gypsum tile of size 595x595x9mm thick fixed in ceiling frame work suspended by GI wire of 5-6mm dia complete all as specified and as directed by Engr-in-Charge Make :- Armstrong/Saint Gobain/Everest |
| 81 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 82 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed or bedding of cement mortar (1:4) complete all as specified and directed. |
| 83 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10 mm thickrendering cement mortar (1:3) complete all as specified and directed. |
| 84 | Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site. |
| 85 | S & F as in door or gates of angle or other section with gusset plate , rail braces etc complete drilled for fixing of steel sheeting or other covering , doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fittings ( exclusive of steel , sheeting or other covering , running rails and guisides ) and hanging also fastening and fixing complete |
| 86 | S&F 1 mm thick mild steel plain black sheet in hearths, covering to door chowkhats (frames) chullah hoods, water tanks , water troughs, ducts,urinal trough and funnels etc , cut to size,edge beaded if directed, holes punched , including round headed screws,clout nails or rivets and fixed to wood or steel members, etc with plain 40 mm lap joints or welded /riveted seams including bending, turning up,mitred angles, stopped ends, outlets etc as required |
| 87 | S & F 100mm long stainless steel Heavy weight but hinges for welded to Iron door shutters and frames complete all as specified and as directed.. |
| 88 | Taking down chowkats and frame n.exc 1.5 Sqm each including shutters without taking off shutters from the frame and removing from site. |
| 89 | S&F in repair steel windows with side hung shutters including Projecting type hinges with steeel handle and steel peg stay complete with Glazing bars Dovetailed and welded. |
| 90 | Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 91 | Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primere complete all as specified. |
| 92 | S&F Sheet glass of size 5.5mm thick ordinary quality and glazing with beads fixed with metal panel pins/neoprene beadings size of pane/parition n.exc 0.5 sqm in each |
| 93 | M & L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and aplying one coat of Synthetic enamal paint of any type complete all as specified and directed by Engr-in-Charge. |
| 94 | M&L for 9mm Pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws/nails to timber frame work in wall portion complete all as specified and directed. |
| 95 | Providing & fixing false ceiling with semi perforated 8-9 mm thick micro tegular edged GRG at all heights with GRG false ceiling tiles of size 595X 595 mm of approved texture design and patterns having moisture content less than 2% humidity resistance of 99% NRCO.50 to 0.75 as per IS 8225:1987,Noncombustible as per BS476(part4)-1970 and light reflectance of 85%(min) to be laid in true horizontal level suspended on inter locking metal T-grid of hot dipped galvanised iron sec of 0.33 mm thick (galvanised @ 120 grams per sqm incl both sides) comprising of main -T runners of size 15x 32 mm of length 3000mm ,cross-T of size 15X32 mm of length 600 mm to form grid module of size 600 x600 mm suspended from ceiling using galvanized mild steel items (galvanizing @80mm per sqm ) i'e 50mm long 8 mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85 x 25 x 2 mm ,Galvanised iron perimeter wall angle of size 24 x 24x 0.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws.The work shall be carried out as per specifications, drawing and as per directions of the Engr-in-Charge. |
| 96 | Dismantling of timber scantling in fillets, posts, rafters, purlins etc under 40Sq. Cm in section in framed work complete all as specified and directed. |
| 97 | M&L for 2nd class hard wood timber scantling plain fillets square, rectangular in section area exc 13 Sqcm and not exc 25sqcm secured with nails complete all as specified and directed. |
| 98 | M&L for 2nd class soft wood fillets sectional area exc 3 sqcm and n exc 6 sqcm rectangular or triangular in section but bullnosed, splayed, chamfered or rounded on one edge of face, secured with nails or brads, complete all as specified and as directed. |
| 99 | M&L for Coloured Non Skid Ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed. |
| 100 | Taking down shutters of any description exc 2.00 sqm sqm each and removing form site. |
| 101 | S&F 125mm long Aluminium, anodised, barrel tower bolt, Mild steel or stainless steel having dia/shoot not less than 10 mm with screws complete all as specified and directed. |
| 102 | S&F 125mm size, extruded aluminium alloy handles fabricated type anodised complete all as specified and directed. |
| 103 | Hacking out old broken of glaass from wooden frame or steel frames or stone concrete or brick with putty or fixed with nail complete all as specified and directed. |
| 104 | S&F sheet glass, ordinary quality, 4 mm thick, in squares exc 0.50 Sqm in each pane and glazing with oil putty/wooden bedding complete all as specified and directed. |
| 105 | Demolition of cement concrete (un-reinforced) in ground floors & paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 106 | M&L for 2nd class soft wood fillets sectional area exc 3 sqcm and n exc 6 sqcm rectangular or triangular in section but bullnosed, splayed, chamfered or rounded on one edge of face, secured with nails or brads, complete all as specified and as directed. |
| 107 | M&L for coloured light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed or bedding of cement mortar (1:6) complete all as specified and directed. |
| 108 | M& L for cement concrete 75mm thick type D - 2 using 40mm graded stone aggregate as in sub base to receive floor finish etc complete all as specified and as directed. |
| 109 | M&L Screed bed or bedding layer 20 mm thick in cement mortar 1:4 on floors for laying floor finish complete all as specified and as directed. |
| 110 | S&F coloured chequrred cement concrete tiles 30 cm x 30cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and as directed. |
| 111 | M&L for providing cement concrete 1:2:4, type B-1 using 20 mm graded aggregate for fixing edges of chequered tiles and rounded or chamfered edges, coping complete all as specified and directed. |
| 112 | S&F of 250mm long, Mild steel or stainless steel, sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 113 | Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc complete and removing all retrieved materials such as fitting & fixture from the site and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge. |
| 114 | Material and labour for point wiring with 1.5 Sqmm copper conductor (Multi-standard) PVC insulated and unsheathed electric cable 1100 volts in and including PVC casing and capping of 25 mm and above (as per conductor run )with all fittings/ accessories and including PVC insulated and unsheathed electric cable 1100 volts1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly including 50 mm deep box made of 2nd class hard board of required size and shape etc covered with 3 mm thick plastic laminated sheet ( Make Hylum) for one light point,bell,exhaust point, bulk head, independent controlled by one, one way switch complete all as specified and as directed by the Engineer-in-Charge. |
| 115 | All as per item No 2 above, but for one 3 pin socket outlet 5 Amp on same board complete all as specified and as directed by the Engineer-in-Charge. |
| 116 | All as per item No 2 above, but for one 3 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge. |
| 117 | All as per serial item No 2 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 1.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly complete all as specified and as directed by Engineer-in-Charge. |
| 118 | Supply and fixing in replacement switch piano flush button single pole one way 5 Amps complete all as specified and as directed by Engineer-in-Charge. |
| 119 | Supply and fixing in replacement socket outlet 2 in 1, 5 Amp, flush type completeall as spe cified and as directed by Engr-in-charge. |
| 120 | Supply and fixing in replacement switch socket combination multi purpose 2 in 1, 3 pin 5A/16A, 5 in 1 flush type complete all as specified and as directed by Engr-in-charge. |
| 121 | Supply and fixing in replacement angular lamp holder, PVC/Polycaronate type with back plate suitable for 09 watt LED bulb for batten fittings complete all as specified and directed by the Engineer-in-Charge. |
| 122 | Supplying and fixing in replacement LED 09 Watt complete all as specified and directed by Engr-in-Charge. |
| 123 | Supply and fixing in replacement ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge. |
| 124 | Supply and fixing in replacement LED batten lights fitting 1x 20W, 220V,AC decorative type including LED tube light connecting up with three core flexible copper conductor cable of suitable size including ceiling rose complete. |
| 125 | Supply and fixing new energy saving LED Bulk head fitting 10 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK07 as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed by Eng-In-Charge |
| 126 | Supply and fixing in replacement sheet Metal enclosure single shutter type for DB’s 240 Volts Single Pole and Neutral 04 way with 200 Amps rated bus bar complete including wooden board of required size duly painted with matching colour paint all as specified and as directed by the Engr-in-charge. |
| 127 | Supply and fixing in replacement MCB single pole and neutral 32 to 40 Amps , 240 volt, 10 KA, complete all as specified and as directed by the Engineer-in-Charge. |
| 128 | Supply and fixing in replacement MCB single pole 5 to 30 Amps, 240 volts, 10 KA complete all as specified and as directed by the Engineer-in-Charge. |
| 129 | Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR 1991 Part-I as specified or indicated including testing on completion . |
| 130 | Supply and fixing in replacement switch, socket combination 2 in 1, 5 Amp, flush type completeall as specified and as directed by Engr-in-charge. |
| 131 | Supply and fixing in replacement angular lamp holder, PVC/Polycaronate type with back plate suitable for 12 watt LED bulb for batten fittings complete all as specified and directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 132 | Supply and fixing in replacement angular lamp holder, PVC/Polycaronate type with back plate suitable for 12 watt LED bulb for batten fittings complete all as specified and directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender