Tender For Repair/Replacement Of Sanitary Fitting Internal Water Supply Flooring & Joineries And Repair/Maint To Interlocking Tiles/Chequered Tiles, Plain Cement Concrete Path, Security Fencing And Camouflage Painting Work In Certain Building At Afs
Tender Value
1.20 Crore
Estimated cost
Bid Submission
09 Sep 2026
16 days left
EMD
1.95 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Sanitary Fitting Internal Water Supply Flooring & Joineries And Repair/Maint To Interlocking Tiles/Chequered Tiles, Plain Cement Concrete Path, Security Fencing And Camouflage Painting Work In Certain Building At Afs Arjangarh Under Ge (Af) Gurgaon
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness ( below or above ground level ) and disposing of debries outside MD land complete all as specified and directed. |
| 2 | Demolition of PCC (unreinforced) of any description & in any position not otherwise specifically provided complete all as specified and as directed. |
| 3 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 4 | Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar etc complete all as specified and directed. |
| 5 | Taking down cement plaster of any description including racking out joints, hacking for key and disposing of debris to a distance exc 1 Km out side MD land all as specified and as directed. |
| 6 | Demolition of concrete block walling,Brick/ RR masonary in cement mortar including all quoins archas pillars etc and pre-cast block walling etc complete all as specifed and directed. |
| 7 | Taking down chowkat or frames with shutters (with out taking off syhutters from the frame) n. exc 1.50 sqm each and removing from site all as specified and as directed. |
| 8 | Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each all as specified and as directed. |
| 9 | Dismantling of ceiling board /Wall panelling of any thickness and of any description including cover fillets complete all as specifed and directed. |
| 10 | Dismantling of aluminium partition / windows of any size and any description complete all as specified and as directed. |
| 11 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or driling out old glazing pins/spring clips and providing and fixing new ones complete all as specifed and directed. |
| 12 | M&L for PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregates) of 25 mm thick as in leveling course ,finished surfaces even and rough to receive floor finish complete all as specifed and directed. |
| 13 | M&L for PCC 1:4:8 type D2,(using 40mm graded stone aggregates) as in foundation,filling and mass concrete all as specified and directed. |
| 14 | M&L for PCC 1:5:10 type E2,(using 40mm graded stone aggregates) as in foundation,filling and mass concrete all as specified and directed. |
| 15 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of motar 15 mm thick for laying floor finished in cement mortar 1:6 complete all as specifed and directed. |
| 16 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of motar 15 mm thick for laying floor finished in cement mortar 1:6 complete all as specifed and directed. |
| 17 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specifed and directed. |
| 18 | M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick laying floor finished in cement mortor 1:6 complete all as specifed and directed. |
| 19 | M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick plastering in CM 1:4 as in backing coat of tiles complete all as specifed and directed. |
| 20 | M&L for glazed ceramic coloured tiles of size 350 x 250 x 7mm/450 x 350 x 7mm thick over and ncluding 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces,set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specifed and directed. |
| 21 | M&L for glazed ceramic coloured tiles of size 300 x 200 x 7mm vertical surface as in dado set and jointed in neat cement slurry & pointed in white cement mixed with pigment to match with color of tiles over and including 10 mm thick rendering in cement mortar 1:4 all as specified and directed. |
| 22 | M&L 20mm thick Granite (of any type) tiles machine cut in skirting/dado over & including backing coat plaster of 10mm thick in CM (1:4) & jointed witht grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone including cutting & polishing etc complete all as specified and directed. |
| 23 | M&L Granite of 20mm thick, work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including screed layer of 15 mm thick in CM 1:4 all as specified and as directed. |
| 24 | M & L for renewing tiles in patches area n.exc 5.00 Sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new ceramic tiles to match the existing floor complete all as specified and directed. |
| 25 | M & L for 40 mm thick plain cement concrete 1 : 2 : 4 type B-1 using 20 mm graded stone aggregate as in floors, finishing surface even and smooth by using extra cement all as specified and as directed. |
| 26 | M& L for glass dividing strips, 3 mm thick complete all as specified and directed. |
| 27 | M&L for 75 mm thick plain cement concrete 1 : 3 : 6 type C1 (using 20 mm graded stone aggregate) as in paving/ plinth protection laid in pannels including necessary form work, finished even and smooth without using extra cement etc complete all as specified and directed. |
| 28 | M&L for rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment including Screed bed or bedding layer of cement mortar 1:4, 15 mm thick for laying floor finishes complete all as specified. |
| 29 | M&L for pre-cast cement concrete block masonary 1:3:6 type C-1 (Using 20 mm graded stone agg) with solid block exc 10 cm in width and setting in CM 1:6 etc complete all as specifed and directed. |
| 30 | M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) etc complete all as specified and directed. |
| 31 | M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) and finish the surface even and smooth including mixing of WPC complete all as specified and as directed.Note: WPC shall be measured and paid seperately |
| 32 | M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed. |
| 33 | Supplying only liquid based water proofing compound complete all as specified and directed. |
| 34 | M&L for 1mm thick wall care putty on ceiling complete all as specified and as directed. |
| 35 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 36 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of suitable primer complete all as specified and directed. |
| 37 | S&F for 40 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, two faces covered with decorative face veneer with lipping / frame to match complete all as specified and directed. |
| 38 | S&F for 30 mm thick Flush shutters, solid core construction, with particle board core & plywood face panels, commercial type on both sides etc complete all as specified and directed. |
| 39 | S&F for Solid PVC door frame of size 50X47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suupplying & fixing in opening complete all as specified and directed . |
| 40 | S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuckinside solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bootom rail; paneling of plain clour PVC sheet to be fitted in the M.S frame welded/ sealed to the stieles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification.complete all as specified and directed. |
| 41 | S&F for butt hinges of stainless steel 100mm size complete all as specifed and directed. |
| 42 | S&F for butt hinges medium weight cold rolled mild steel 100mm complete all as specifed and directed. |
| 43 | S&F for mild steel butt hinges of 75mm long each complete all as specifed and directed. |
| 44 | S&F for 200 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 45 | S&F for 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 46 | S&F for 150mm long anodised extruded aluminium alloy handles, fabricated type. complete all as specified and directed. |
| 47 | S&F for 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 48 | S&F for floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (140mm size), fixed as in repair complete all as specified and directed. |
| 49 | S&F in repair for door closer hydraulically regulated aluminum (dia cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg, fixed as in repairs, complete all as specified and directed. |
| 50 | S&F powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 51 | S&F for powder coated aluminium window and ventilator shutters, side hung / sliding type without sash bar, aluminium section weighing not less than 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.), hinges type B-21 100 mm long (2 Nos.), suitable handle (1 No.) complete all specified and directed. |
| 52 | S&F for anodised aluminium window and ventilator shutters, side hung / sliding type without sash bar, aluminium section weighing not less than 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.), hinges type B-21 100 mm long (2 Nos.), suitable handle (1 No.) complete all as specified and directed. |
| 53 | M&L for 9 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work in cup board shutters / aluminium partions etc..complete all as specified and directed. |
| 54 | S & F 7 mm thick Aluminium grill of make \\"Deco grill\\" and DG - 104 model or any other equivalent approved make fitted in to suitable Aluminium channel and fixed to windows/ ventilators including channel complete all as approved and directed. |
| 55 | S&F for 4 mm thick figured glass, pin head type and glazing with oil putty / aluminium beading in square not exc 0.50 Sqm each in each pane all as specified and directed. |
| 56 | S&F for 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm each in each pane all as specified and directed. |
| 57 | Re securing glass of any description in existing metal frames, glazed with putty / beads including removing loose / decayed putty / beads, painting / oiling one coat on rebates, grooves, re puttying and painting / oiling puttied surfaces to match existing work ( New length of frame re puttied shall be measured ) complete all as specified and directed. |
| 58 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples etc complete all as specified and directed. |
| 59 | S&F Anodised aluminium snap grid frame work of size 605 x 605mm in ceiling fixed with screw suspended with 6mm dia GI (upto 1200 mm length) adjustign level fixed to roof slabs by means of ceiling cleates made out of GI flat 40 x 3 mm size 60mm long complete all as specified and as directed. |
| 60 | M&L exposed metal frame ceiling with 12 mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600 mm gride (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed. |
| 61 | Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers of 6mm dia GI (upto 1200 mm length) adjustign level fixed to roof slabs by means of ceiling cleates made out of GI flat 40 x 3 mm size 60mm long complete all as specified and directed. |
| 62 | Providing & fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions and seamless finish on joints etc complete all as specified and directed. |
| 63 | S&F in repairs SS tubes, plates, chains, special articles of any size and shape fixed in position as in railings etc., including welding, polishing complete all as specified and as directed. |
| 64 | M&L for Preparation of new wooden surface of any description over 10cm width or girth applying two coat of synthetic enamel paint over a coat of pink primer complete all as specifed and directed. |
| 65 | M & L for 15 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed. |
| 66 | M & L for 20 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed. |
| 67 | S & F rotational moulded polyethylene water storage tanks ( cylindrical, vertical with closed top ) hoisted and fixed in position of 500 Ltrs capacity including taking down old one all as specified and as directed. |
| 68 | All as per item No.67 above but 1000 Ltrs capacity complete all as specified and directed. |
| 69 | All as per item No.67 above but 2000 Ltrs capacity complete all as specified and directed. |
| 70 | S&F in repairs counter top WHB of size 550 x 430 x 195 mm of Parryware make (model:C0466(SP)) or equivalent of make mentioned in list of makes including taking down the existing unserviceable WHB complete all as specified and directed. |
| 71 | S&F in repairs counter top WHB of size 550 x 445 x 200 mm of Parryware make (model:C0431) or equivalent of make mentioned in list of makes including taking down the existing unserviceable WHB complete all as specified and as directed. |
| 72 | S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets etc complete all as specified and directed. |
| 73 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white complete all as specified and directed. |
| 74 | S&F in repairs Vitreous China squatting pan of orissa pattern size 580mm 440 mm white with `P' or `S' trap, front or back inlet & integrated foot rests, including provision of cement concrete bedding complete all as specified and directed. |
| 75 | S&F in repairs Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe & waste pipe) etc complete all as specified and directed. |
| 76 | S&F in repairs Vitreous China Urinal, half stall type, white (excluding flushing cistern, flush pipe & waste pipe) etc complete all as specified and directed. |
| 77 | S & F in repairs vitreous china urinal partition white of size 310 x 700 mm terminating above floor line incl removing of existing partition complete all as specified and directed. |
| 78 | S&F in repairs Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min. weight 60gms) etc complete all as specified and directed. |
| 79 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste; including bedding in CM to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 80 | S&F in repair plastic water closet seat, black and white closed pattern with flat bottom and cover and mild steel chromium plated plated or aluminium hinging device complete all as specifed and directed. |
| 81 | S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets etc complete all as specified and directed. |
| 82 | S&F in repairs CP Bib taps fancy type 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed. |
| 83 | S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe etc complete all as specified and directed. |
| 84 | S & F in repairs swan neck pillar tap of (make:SEIKO code:SF 3010 or equivalent of make mentioend in list of makes) including removing the existing unserviceable pillar tap etc complete all as specified and directed. |
| 85 | S&F in repair Stop valves 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed. |
| 86 | S&F in repair for 15mm bore brass chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall complete all as specifed and directed. |
| 87 | S&F in repair for 15mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall complete all as specifed and directed. |
| 88 | S&F in repair Health faucet, CP body with 1mtr SS braided rubber hose pipe & wall hook complete all as specified and directedMake CERA or equivalent Model no: CG105A or equivalent of make mentioned in list of makes |
| 89 | S&F in repair for CP towel rail of 20mm dia with hook 600mm long complete all as specifed and directed. |
| 90 | S&F in repair for CP shower rose complete all as specifed and directed. |
| 91 | S&F in repair 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve etc complete all as specified and directed. |
| 92 | S&F in repair 15 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve etc complete all as specified and directed. |
| 93 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood & fixed to wooden plugs with CP brass screws & cup washers complete all as specified and directed. |
| 94 | S&F in repair 20 mm dia bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including taking down old ball valve complete all as specified and directed [Minimum weight for 20 mm – 210 gms] . |
| 95 | All as per Item No.94 above item but 25 mm dia complete all as specified and directed. [Minimum weight for 25 mm – 455 gms]. |
| 96 | S&F PTMT waste coupling of 32 mm dia ( half or full threaded ) including taking down old coupling of any description complete all as specified and directed [Minimum weight for 32 mm – 45 gms]. |
| 97 | S&F PTMT waste coupling of 40 mm dia ( half or full threaded ) including taking down old coupling of any description complete all as specified and directed [Minimum weight for 40 mm –60 gms]. |
| 98 | S&F grating doom 100 mm dia of PTMT, including taking down old grating doom complete all as specified and as directed [Minimum weight-25 gms]. |
| 99 | S&F PVC connection 15 mm size with PTMT nuts of length 600 mm, including taking down old PVC connection all as specified and directed. |
| 100 | S&F in repair 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes all as specified and directed. |
| 101 | All as per item No.100 above but 110 mm dia complete all as specified and directed. |
| 102 | All as per item No.100 above but 160 mm dia complete all as specified and directed. |
| 103 | All as per item No.100 above but 200 mm dia complete all as specified and directed. |
| 104 | S&F in repair PVC (SWR) bends any radius 75 mm dia of bore, including taking down old bends all as specified and as directed. |
| 105 | S&F in repair PVC (SWR) branch piece single equal of bore 75 mm dia, , in repairs all as specified and as directed |
| 106 | S&F in repair PVC (SWR) bends any radius 110 mm dia of bore, including taking down old bends all as specified and as directed. |
| 107 | S&F in repair PVC (SWR) branch piece single equal of bore 110 mm dia, all as specified and as directed |
| 108 | S&F in repair PVC (SWR) vent cowl of bore 110 mm dia, including taking down old PVC vent cowl all as specified and directed. |
| 109 | S&F in repairs 32mm dia, 800mm long flexible PVC waste pipe complete all as specified and directed.Make: Prayag Cat no: 327 or equivalent of make mentioned in list of makes |
| 110 | S&F 75mm dia outlet PVC multi floor trap with grating including dismantling the damaged trap all as specified and directed. |
| 111 | S&F in repair polyethylene water tank cover with hinges suitable up to 1000 Ltrs tanks, including taking down old water tank cover all as specified and as directed. |
| 112 | S&F for Venetian blinds, vertical type, 100 mm wide with polyester fabric of approved colour and pattern with aluminum fittings, and top rail and nylon buttons / loops etc., fixed cuttings and alteration if necessary wherever AC / coolers exists including dismantling of old unserviceable venetian blinds, complete all as specified and directed. |
| 113 | Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc., of capacity exc 250 Ltrs but not exc 500 Ltrs complete all as specified and as directed. |
| 114 | All as per item no.113 above but capacity of tank exc 500 Ltrs and not exc 1000 Ltrs complete all as specified and as directed. |
| 115 | All as per item no.113 above but capacity of tank exc 1000 Ltrs and not exc 2000 Ltrs complete all as specified and directed. |
| 116 | Removing vegetation growth / plants of any size at the junction of SWR pipe and wall, parapets up to roots and making good disturbed the surface in CM 1:3 up to height of 16 m all as specified and directed. |
| 117 | M&L for cutting out cracks to V-sections in existing roofs or terracing, cleaning out, and filling solidly with a hot mixture of bitumen and clean dry sand in the proportion of 1:1 ( by weight ) complete all as specified and as directed. |
| 118 | Cutting of tree branches of girth not less 10 cm falling over the building roof top upto a height of 15m from ground floor and cleaning the roof surface viz., leaves, tree branches etc incl removing of branches, leaves out of MD land all as specified and as directed by Engr-in-charge. |
| 119 | Cleaning of foliage on accessible / non accessible upto six storeyed roof top, mud cakes, rain water pipe outlets to ensure to pass the water through RWP with out any stagnation, etc including proper arrangement of ladder, scaffolding if required and cleaning with water and removal of debris out of MD land complete all as specified and as directed by Engr-in-charge |
| 120 | M&L for preparation of old painted wooden surfaces of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 121 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint on steel surfaces complete all as specified and directed. |
| 122 | M&L for french polishing on surfaces of any description, width or girth including cleaning & preparing the surface including a coat of wood filler on old works with one or more coats complete all as specified and directed. |
| 123 | Providing & Fixing 1.00mm thick Brushbond RFX (which is a two component acrylic polymer modified cementitious coating which consists of Brushbond RFX powder and Nitobond BBX acrylic emulsion), grey in colour, of M/s FOSROC or equivalent of make mentioned in list of makes, using stiff brush,roller or trowel to obtain the desired thickness complete all as per manufacturers’ instructions, complete all as specified and directed. |
| 124 | M & L for writing letters or figures (Block, Roman, Italic or Indian) n exc. 30 cm high including preration of the surface complete all as specified and directed |
| 125 | M&L for applying two coats of Plastic emulsion paint on brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described including preparation of surfaces & priming paints plaster coat etc complete all as specified and directed. |
| 126 | S&F in repair for 20 mm dia chromium plated pipes for curtain rods complete all as specified and directed. |
| 127 | S&F in repair for Chromium plated brackets and knobs for curtain rods complete all as specified and directed. |
| 128 | S&F in repair brass locks 4 levers for, cup board grade-I of size 50 mm fixed including taking down old locks all as specified and directed. |
| 129 | S&F in repair 150 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring including taking down old door stopper of aluminium all as specified and directed. |
| 130 | S&F in repair aluminium anodised barrel towel bolts of extruded section of length 150 mm including taking down old unserviceable barrel tower bolts all as specified and directed. |
| 131 | S&F in repair for 300 mm Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections including taking down old sliding door bolt all as specified and as directed. |
| 132 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 133 | S&F Fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 134 | S&F in repair mild steel butt hinges medium weight cold rolled mild steel of size 100 mm by welding to existing frame including taking down old hinges all as specified and as directed. |
| 135 | S&F in repair for aluminium extruded alloy handles fabricated type anodised of size 150 mm including taking down old handles all as specified and directed. |
| 136 | S & F hasp and staple safety type of size 100 mm of aluminium anodized including taking down old hasp and staple all as specified and as directed. |
| 137 | Excavation in post holes (or similar holes) each n. exc 0.5cum, getting out, returning filling in and ramming earth or brocken rubble mixed with earth arround in layers not exc 25cm watering and removing surplus soil to a distance n. exc 50m and making good surfaces etc complete all as specified |
| 138 | Brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) all as specified. |
| 139 | Brick work with sub class ‘B’ (Except Bricks) old size bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) all as specified. |
| 140 | M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan to any radius as in half brick thick wall in CM (1:4) and pointed flush with the same mortar as the work proceeds complete all as specified. |
| 141 | M & L for Brick work with sub class ‘B’ bricks (except bricks), straight or curved on plan to any radius as in half brick thick wall in CM (1:4) and pointed flush with the same mortar as the work proceeds complete all as specified. |
| 142 | M&L Plain cement concrete ( 1:2:4), type B-1, (using 20 mm graded stone aggregate) as in surface channels and drains, benching of manholes laid to shape including necessary form works, complete all as specified. |
| 143 | M & L for 75 mm thick, Cement concrete type D-2, 1:4:8 (40mm graded aggregate), etc completed all as specified. |
| 144 | M & L for 100 mm thick, Cement concrete type B- 2, 1:2:4 (40mm graded aggregate), etc completed all as specified. |
| 145 | M&L For Chequered cement concrete tiles 25cm x 25cm x 25mm thick in floors / path set, jointed & pointed in neat cement slurry using grey cement and no pigment laid over and including 15mm thick screed bed in cement mortar (1:6) including necessary cutting as per site requirement complete all as specified. |
| 146 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line , level and curvature,jointed withcement mortar 1:3 ( 1 cement : 3 coarse sand ) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm) , including making drainage opening whereever required complete. |
| 147 | Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved design & pattern as in footpath , parks , lawns,drive ways or light traffic parking etc. of required strength , thickness & size/shape, made by table vibratory method using PU mould , laid in required pattern over and including 25 mm thick compacted bed of fine sand , compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling joints with sand andcutting of paver block as per required size and pattern,finishing and sweeping extra sand. |
| 148 | Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved design & pattern as in footpath , parks , lawns,drive ways or light traffic parking etc. of required strength , thickness & size/shape, made by table vibratory method using PU mould , laid in required pattern over and including 25 mm thick compacted bed of fine sand , compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling joints with sand andcutting of paver block as per required size and pattern,finishing and sweeping extra sand. |
| 149 | M&L for Cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified. |
| 150 | Cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in coping including necessary formwork complete all as specified. |
| 151 | Mild steel angle iron conforming to FE-290 Gde E-250 as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all drilling, bolting or rivetting etc. and similar works and embedding in concrete and screwing etc. complete all as specified |
| 152 | Dismantling of wrought iron of mild steel work of any description in any position not otherwise specifically provided for all as specified. |
| 153 | Mild steel framed work conforming to Fe-290 Gde E-165 quality-A as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, walkways, railing, barred iron doors including side hung gates with pintel hinges, spops, hand made sliding bolts, framed work of water tanks, door chowkats and similar works complete all as specified |
| 154 | Mild steel bolts (machine made) with screwed on end with hexagonal or square nuts and washer other end 8-10 mm dia of neck and exc 5 cm long but n exc 10 cm long complete all as specified. |
| 155 | Supply only chain link MS hot dipped galvanised coating fencing any size or type as complete all as specified. |
| 156 | Mild steel round bars 10mm dia and over cut to length, bent to shape required including bending spirally , hooking ends and binding with mild steel wire or securing with clips or welded to MS angle conforming to Fe-410 Gde E-250 quality- A etc complete all as specified. |
| 157 | Dismantling of old chain link fencing of any description of weight n exc 4.0 kg/sqm from existing fencing fixed with steel or concrete posts complete all as specified. |
| 158 | Fixing only chain link fencing including line wires any mesh, size and type to any type of standards, rail, straining bolts etc including provision of binding wire etc complete all as specified. |
| 159 | Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion (posts embedded in concrete, brick work etc.) and making good the disturbed ground complete all as specified. |
| 160 | S&F in repairs Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings withand provision of galvanised mild steel wire, staples or steel pins etc IN REPLACEMENT as directed complete all as specified. |
| 161 | Preparing steel and iron surfaces (new) of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified. |
| 162 | S&F in repairs punched tape concertina coil 900 mm coil dia size of any type of standards, rails etc including provision of mild steel (annealed) binding wire complete all as specified and directed & by Engineer-in-Charge. |
| 163 | S&F in repairs punched tape concertina coil 600 mm coil dia size of any type of standards, rails etc including provision of mild steel (annealed) binding wire complete all as specified and directed & by Engineer-in-Charge. |
| 164 | Maintenance of drain /Nallah by cutting all bushes, shrubs, sarkandas and any type of vegetation and desilting all deposit of soil and other material to have a free flow of water and to get a uniform trapezoidal/ rectangular shape of drain and removing all spoil from MOD area to a distance exc 250m but n exc 500m and deposited in layer n exc 25cm thick , cross sectional area of drain /nallah n exc 1.5 sqm complete all as specified and directed |
| 165 | S & F in repair 1.8 mm thick Fibre glass reinforced translucent plane sheeting fixed with coach screw and washer in roof/wall/frame etccompleted all as specified. Please Enable Macros to View BoQ information |
| 166 | S & F in repair 1.8 mm thick Fibre glass reinforced translucent plane sheeting fixed with coach screw and washer in roof/wall/frame etccompleted all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender