Tender For Repair/Maint Of Old Ci/Di/Gi Pipe Line And Connected Items At Domestic Area At Af Stn Ambala Under Ge (Af) Ambala
Tender Value
48 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
20 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Old Ci/Di/Gi Pipe Line And Connected Items At Domestic Area At Af Stn Ambala Under Ge (Af) Ambala
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Aug-2026 | CORRIGENDUM No 01 | Date | 12-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation soft/loose soil not exceeding 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed |
| 2 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.50 m deep in soft/loose soil for laying and taking out water pipe lines, including getting out excavated material, dressing and levelling bottom surface to the required level and slope, complete all as specified and directed.Note:1. During excavation, if any footpath, PCC, plinth protection, valve chamber, road, drain or other existing structure is damaged, the same shall be made good and restored by the contractor to the satisfaction of the Engineer-in-Charge. The quantity of such rectification/restoration work shall be measured and paid separately under the relevant items of work.2.Wherever mechanical excavation is not feasible or is prohibited due to site conditions, proximity to existing utilities, structures, or safety considerations, the contractor shall carry out manual excavation only, as directed by the Engineer-in-Charge.3. The contractor shall use suitable utility locating and detection tools (for water lines, electrical cables and other underground services) before and during excavation. Any damage caused to existing electrical infrastructure, cables, ducts, water supply lines or allied services during excavation shall be repaired and restored to its original condition by the contractor at his own cost. In case the repair/restoration is not completed within 24 hours from the time of damage, a penalty of ₹2,000 per day shall be recovered from the contract amount for each day of delay. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with excavated soil, complete all as specified and directed. |
| 4 | Removal of surplus soil to a distance not exceeding 50 metres and depositing the same where directed, at a level not exceeding 1.5 metres above the starting point, complete all as specified and directed. |
| 5 | Taking up or lowering CI water mains of 150/100/80 mm dia bore, including all fittings, with spigot and socket ends and lead joints, including burning out of joints and recovering lead, complete all as specified and directed. |
| 6 | Supplying and laying in trenches centrifugally cast (spun) ductile iron pressure pipes of 150 mm dia for water supply, with spigot and socket ends, Class ‘K-9’, conforming to IS: 8329:2000 (latest version), suitable for push-on rubber gasket jointing, with internal cement mortar lining using Portland Slag Cement conforming to IS: 455:1989 and external metallic zinc coating as per Annex ‘A’ of IS: 8329, finished with a layer of bituminous coating as per Annex ‘C’, duly ISI marked, in any standard length, including testing and commissioning, complete all as specified and directed. |
| 7 | Supplying and laying in trenches centrifugally cast (spun) ductile iron pressure pipes of 100 mm dia for water supply, with spigot and socket ends, Class ‘K-9’, conforming to IS: 8329:2000 (latest version), suitable for push-on rubber gasket jointing, with internal cement mortar lining using Portland Slag Cement conforming to IS: 455:1989 and external metallic zinc coating as per Annex ‘A’ of IS: 8329, finished with a layer of bituminous coating as per Annex ‘C’, duly ISI marked, in any standard length, including testing and commissioning, complete all as specified and directed. |
| 8 | Supplying and laying in trenches centrifugally cast (spun) ductile iron pressure pipes of 80 mm dia for water supply, with spigot and socket ends, Class ‘K-9’, conforming to IS: 8329:2000 (latest version), suitable for push-on rubber gasket jointing, with internal cement mortar lining using Portland Slag Cement conforming to IS: 455:1989 and external metallic zinc coating as per Annex ‘A’ of IS: 8329, finished with a layer of bituminous coating as per Annex ‘C’, duly ISI marked, in any standard length, including testing and commissioning, complete all as specified and directed. |
| 9 | Taking up or lowering DI water mains of 150/100/80 mm dia bore, including all fittings, with flanged ends including disconnecting pipes and fittings complete all as specified and directed. |
| 10 | Supplying and laying in trenches centrifugally cast (spun) ductile iron pressure pipes of 150 mm dia for water supply, with flanged ends, Class ‘K-9’, conforming to IS: 8329:2000 (latest version), suitable for rubber gasket jointing, with internal cement mortar lining using Portland Slag Cement conforming to IS: 455:1989 and external metallic zinc coating as per Annex ‘A’ of IS: 8329, finished with a layer of bituminous coating as per Annex ‘C’, duly ISI marked, in any standard length, including testing and commissioning, complete all as specified and directed. Make: Electrosteel/Tata/Jindal. |
| 11 | Supplying and laying in trenches centrifugally cast (spun) ductile iron pressure pipes of 100 mm dia for water supply, with flanged ends, Class ‘K-9’, conforming to IS: 8329:2000 (latest version), suitable for rubber gasket jointing, with internal cement mortar lining using Portland Slag Cement conforming to IS: 455:1989 and external metallic zinc coating as per Annex ‘A’ of IS: 8329, finished with a layer of bituminous coating as per Annex ‘C’, duly ISI marked, in any standard length, including testing and commissioning, complete all as specified and directed. Make: Electrosteel/Tata/Jindal. |
| 12 | Supplying and laying in trenches centrifugally cast (spun) ductile iron pressure pipes of 80 mm dia for water supply, with flanged ends, Class ‘K-9’, conforming to IS: 8329:2000 (latest version), suitable for rubber gasket jointing, with internal cement mortar lining using Portland Slag Cement conforming to IS: 455:1989 and external metallic zinc coating as per Annex ‘A’ of IS: 8329, finished with a layer of bituminous coating as per Annex ‘C’, duly ISI marked, in any standard length, including testing and commissioning, complete all as specified and directed. Make: Electrosteel/Tata/Jindal. |
| 13 | Supply, laying and jointing in repair/replacement of heavy duty CI/DI fittings such as bends (any type, radius and angle), tapers of any type (straight, bend, increasing, decreasing or double socket, etc.), tee pieces, single branch, Y-junctions, double branch, crosses (all socketed or socket and spigot or all flanged or one end flanged and other ends spigot/socketed), collars, caps, plugs, MJ collar couplings, mechanical joints etc., conforming to relevant IS specifications, for pipe sizes up to 200 mm bore, including excavation of leaking/damaged area, cutting of existing pipeline wherever required, jointing with suitable rubber gasket/lead jointing material, testing for leak-proof operation, returning, filling, disposal of surplus excavated material and restoration of disturbed surfaces, complete all as specified and directed by Engineer-in-Charge. Make: Electrosteel/Jindal/Tata. |
| 14 | Taking down old unserviceable GI pipe 100/80/50/25/20mm dia complete all as specified and as directed. |
| 15 | Supply, laying, testing and jointing GI tubing of 100 mm dia bore, medium grade, conforming to IS:1239, including all fittings, laid in trenches, complete all as specified and directed. |
| 16 | Supply, laying, testing and jointing GI tubing of 80 mm dia bore, medium grade, conforming to IS:1239, including all fittings, laid in trenches, complete all as specified and directed. |
| 17 | Supply, laying, testing and jointing GI tubing of 50 mm dia bore, medium grade, conforming to IS:1239, including all fittings, laid in trenches, complete all as specified and directed. |
| 18 | Supply, laying, testing and jointing GI tubing of 25 mm dia bore, medium grade, conforming to IS:1239, including all fittings, laid in trenches, complete all as specified and directed. |
| 19 | Supply, laying, testing and jointing GI tubing of 20 mm dia bore, medium grade, conforming to IS:1239, including all fittings, laid in trenches, complete all as specified and directed.Note: for Item Nos. 15 to 19: If existing wall plastering/PCC/bricks wall or any other surface is damaged/disturbed during repair/replacement of the GI pipeline, the affected surface/area shall be made good to match the existing condition. The quantity for such making good work shall be measured and paid separately under the relevant items, complete all as specified and directed. |
| 20 | Supply of Orthotolidine (OT) Solution for residual chlorine testing in potable water, packed in 450 ml sealed bottle, suitable for rapid colorimetric determination of free and total residual chlorine in drinking water, clear and stable reagent formulation providing accurate and reliable test results, compatible with standard chlorine testing comparators and field testing kits, supplied in leak-proof, chemically resistant bottle with proper labeling complete all as specified and directed. Make: RMCO / Systronics / Hach. |
| 21 | Taking down old unserviceable sluice valve 150/100/80mm dia complete all as specified and as directed. |
| 22 | S&F, testing and commissioning Double flanged non-rising stem type cast iron sluice valve suitable for 150 mm dia bore pipe with hand wheel and suitable for pressure rating of PN :1.6 duly drilled holes for fixing of nuts and bolts, stem made of high tensile brass ISI marked and conforming to IS:14846/IS 780 including rubber gasket, nuts, bolts and washers complete all as specified and directed. Make: Zoloto/Leader/Kirloskar |
| 23 | S&F, testing and commissioning Double flanged non-rising stem type cast iron sluice valve suitable for 100 mm dia bore pipe with hand wheel and suitable for pressure rating of PN :1.6 duly drilled holes for fixing of nuts and bolts, stem made of high tensile brass ISI marked and conforming to IS:14846/IS 780 including rubber gasket, nuts, bolts and washers complete all as specified and directed. Make: Zoloto/Leader/Kirloskar |
| 24 | S&F, testing and commissioning Double flanged non-rising stem type cast iron sluice valve suitable for 80 mm dia bore pipe with hand wheel and suitable for pressure rating of PN :1.6 duly drilled holes for fixing of nuts and bolts, stem made of high tensile brass ISI marked and conforming to IS:14846/IS 780 including rubber gasket, nuts, bolts and washers complete all as specified and directed. Make: Zoloto/Leader/Kirloskar |
| 25 | Taking down old unserviceable NRV 150/100/80mm dia complete all as specified and as directed. |
| 26 | S&F, testing and commissioning Double flanged cast Iron swing check type reflux (Non Return) valve 150 mm dia single door pattern conforming to IS : 5312 (part – I)–1969, duly drilled holes for fixing nuts and bolts including rubber gasket, nuts, bolts and washers complete all as specified and directed.Make: RMCO/Kartar/Sant |
| 27 | S&F, testing and commissioning Double flanged cast Iron swing check type reflux (Non Return) valve 100 mm dia single door pattern conforming to IS : 5312 (part – I)–1969, duly drilled holes for fixing nuts and bolts including rubber gasket, nuts, bolts and washers complete all as specified and directed. Make: RMCO/Kartar/Sant |
| 28 | S&F, testing and commissioning Double flanged cast Iron swing check type reflux (Non Return) valve 80 mm dia single door pattern conforming to IS : 5312 (part – I)–1969, duly drilled holes for fixing nuts and bolts including rubber gasket, nuts, bolts and washers complete all as specified and directed. Make: RMCO/Kartar/Sant |
| 29 | Taking down old unserviceable CI/DI butterfly valve 100/80mm dia complete all as specified and as directed. |
| 30 | S&F CI/DI Butterfly Valve, lever operated, Pressure rating PN- 16, Wafer type, nitrile rubber lining, suitable insertion between flanges ends, 100 mm nominal bore ISI marked complete with MS tail pieces double side flanged including welding work as per site requirement, rubber/fiber board gasket, nuts & bolts, washers etc complete all as specified and directed by Engr-in-Charge. Make: Sant/ Zoloto / kartar / kirloskar |
| 31 | S&F CI/DI Butterfly Valve, lever operated, Pressure rating PN- 1.6, Wafer type, nitrile rubber lining, suitable insertion between flanges ends, 80 mm nominal bore ISI marked complete with MS tail pieces double side flanged including welding work as per site requirement, rubber/fiber board gasket, nuts & bolts, washers etc complete all as specified and directed by Engr-in-Charge. Make: Sant/ Zoloto / kartar / kirloskar |
| 32 | Taking down old unserviceable gate valve 50/25/20mm dia complete all as specified and as directed. |
| 33 | S&F and testing of 50 mm dia Gun Metal Gate Valve, screwed body ends with cast iron hand wheel, conforming to IS: 778-1984 and ISI marked, including cutting of existing GI pipe line, removal of unserviceable valve (if any), insertion and fixing of new valve with all necessary fittings, jointing materials, testing for proper operation and leakage, complete in all respects, all as specified and directed by the Engineer-in-Charge.Make: Zoloto/Leader/Scud |
| 34 | S&F and testing of 25 mm dia Gun Metal Gate Valve, screwed body ends with cast iron hand wheel, conforming to IS: 778-1984 and ISI marked, including cutting of existing GI pipe line, removal of unserviceable valve (if any), insertion and fixing of new valve with all necessary fittings, jointing materials, testing for proper operation and leakage, complete in all respects, all as specified and directed by the Engineer-in-Charge.Make: Zoloto/Leader/Scud |
| 35 | S&F and testing of 20 mm dia Gun Metal Gate Valve, screwed body ends with cast iron hand wheel, conforming to IS: 778-1984 and ISI marked, including cutting of existing GI pipe line, removal of unserviceable valve (if any), insertion and fixing of new valve with all necessary fittings, jointing materials, testing for proper operation and leakage, complete in all respects, all as specified and directed by the Engineer-in-Charge.Make: Zoloto/Leader/Scud |
| 36 | Demolition of existing valve chamber of any size complete all as specified and as directed. |
| 37 | M&L for masonry valve pit chamber of size 1500x1500x1050mm internal size complete with excavation, earth work and brick work in CM 1:6, 15mm thick plastering in CM 1:4 internally including 5mm thick MS Sheet cover and angle iron frame of suitable size and two coats of synthetic enamel paint over one coat of red oxide primer complete with locking arrangement complete all as specified and directed. |
| 38 | M&L for run lead joints for 200 mm dia cast iron spun pipes/fittings, including burning out existing defective joints, recovering serviceable lead, refixing and pouring molten lead in joints, caulking, yarn packing and making the joints completely watertight and leak proof, complete all as specified and directed by Engineer-in-Charge. |
| 39 | M&L for run lead joints for 150 mm dia cast iron spun pipes/fittings, including burning out existing defective joints, recovering serviceable lead, refixing and pouring molten lead in joints, caulking, yarn packing and making the joints completely watertight and leak proof, complete all as specified and directed by Engineer-in-Charge. |
| 40 | M&L for run lead joints for 100 mm dia cast iron spun pipes/fittings, including burning out existing defective joints, recovering serviceable lead, refixing and pouring molten lead in joints, caulking, yarn packing and making the joints completely watertight and leak proof, complete all as specified and directed by Engineer-in-Charge. |
| 41 | M&L for run lead joints for 80 mm dia cast iron spun pipes/fittings, including burning out existing defective joints, recovering serviceable lead, refixing and pouring molten lead in joints, caulking, yarn packing and making the joints completely watertight and leak proof, complete all as specified and directed by Engineer-in-Charge. |
| 42 | M&L for making joints with rubber/fibre board gaskets for flanged pipes and fittings suitable for 150 mm bore cast iron pipes, including replacement of unserviceable/corroded nuts, bolts, washers and providing all necessary jointing materials, tightening, alignment and testing for completely leak-proof performance, complete all as specified and directed by Engineer-in-Charge. |
| 43 | M&L for making joints with rubber/fibre board gaskets for flanged pipes and fittings suitable for 100 mm bore cast iron pipes, including replacement of unserviceable/corroded nuts, bolts, washers and providing all necessary jointing materials, tightening, alignment and testing for completely leak-proof performance, complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 44 | M&L for making joints with rubber/fibre board gaskets for flanged pipes and fittings suitable for 100 mm bore cast iron pipes, including replacement of unserviceable/corroded nuts, bolts, washers and providing all necessary jointing materials, tightening, alignment and testing for completely leak-proof performance, complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 12, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 20 daysSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender