Tender For Special Repair To 07 Jcos Md Accn At Abdul Hamid Line Under Ge (North) Ambala Cantt
Tender Value
41.82 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
9 days left
EMD
83640
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To 07 Jcos Md Accn At Abdul Hamid Line Under Ge (North) Ambala Cantt
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' (B/R PORTION):Dismanteling of Asbestos cement (corrugated semicorrugated etc ) sheets in roof covering inlcluding dismantling ms flat iron wind ties over roof sheet ( if any ) complete all as specified and as directed. |
| 2 | Supply and fixing for pre-painted galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/ cladding to wall fixed with self taping screws with bituminious washers complete all as specified and as directed. |
| 3 | Supply and fixing for pre-painted galvalume Aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/ cladding to wall fixed with self taping screws with bituminious washers complete all as specified and as directed. |
| 4 | Dismantling timber scantlings 40 sq. cm and over in section in any position ( unframed work ) complete all as specified and as directed. |
| 5 | Material and labour for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) of Fe -410 W ( Gde -E 250 ) quality A including welding ,distance pieces, gusset plates ,cleats,base plates and neccesary fastenings complete all as specified and as directed. |
| 6 | Supply and fixing for Mild steel screw bolts (machine made) of diameter of neck ( 16 mm to 20 mm ) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 22.5cm and n exc 30cm long complete all as specified and as directed. |
| 7 | Supply and fixing for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts confirming to Fe -410 complete all as specified and as directed. |
| 8 | Demolition of cement concrete (unreinforced) of any description and in any position including any type of sunken treatment , roof treatment, mud phuska, PCC padding,lime concrete etc. and Clean up to existing RCC roof by steel wire brushes and surface washed with clean water and complete all as specified and directed.Note: All Demolished material / debries will be taken by the contractor out side of the cantonment without any extra cost to the govt.contractor should quote his rate Keeping this Aspect in mind. |
| 9 | Material and labour for 15 mm thick plaster in CM 1:4 over concrete surfaces of roofs finished even and smooth with WPC @ 200 ml per bag by weight of cement ( WPC will be measuredpaid seperately) as in roof treatment work all as specified and directed . |
| 10 | Material & Labour for providing and laying 3mm thick APP (atactic polypropylene polymer) modified prefabricated five layer weight not less than 3.00 kg /Sqm water proofing membrane black finish reinforced with non woven polyster matt and consisting of a coat bituminous primer @ 1.20 litre /Sqm by the same membrane manufactures of density 0.87 to 0.89 kg/ltr at 25 degree centegrate temperature and viscosity 70–160 cps over the primer coat with overlap of 100mm at the side and 150mm at the end, the layer membrane shall be laid using butane gas torch and sealing all joints etc. after preparing the surface complete as per standred practice as per manufacture's instructions. The vital physical and chemical parameters of the membrane shell be under :–(i) Joint strength in longitudinal and transverse direction at 23 degree centegrate at 650/ 450 N /5 cms(ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane not less then 150 degree centegrate when tested in accordance with ASTM (d–5147)(iii) The laying of membrane shell be got down through the authorised applicator of manufactures of membrane only , complete, all as specified and as directed.(iv) The work shall be carriout at a height upto 12 metre. |
| 11 | Material and labour for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in mass concrete over roof as in padding incl cement slurry over old RCC surface, surface fair finished even & smooth without using extra cement. all as specified and directed. |
| 12 | Supply only integral water proofing compound complete all as specified and as directed. |
| 13 | Material and labour for cement concrete tiles 30 cm x 30cm x 20 mm thick, machine pressed laid on screed bed and joints grouted flush in CM (1:3) mixed with 5% crude oil by weight of cement including screed bed 15 mm thick in cement mortar 1:6 , complete, all as specified and as directed. |
| 14 | Material and labour for PCC 1:2:4 type B1 (20mm graded aggregate ) as in roof kerb, fillets at junctions between roof and parapet walls, copings rounded or chamfered angles complete all as specified and as directed. |
| 15 | Material and labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hotmixture of bitumen and clean dry sand 1:1 (by weight) and all as specified and directed. |
| 16 | Demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. complete all as specified and as directed. |
| 17 | Material and labour for brick work with sub class 'B' bricks old size, class 7.5 designation, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 18 | Material and labour for brick work with sub class -B bricks, in half brick thick walls, built in cement moratr 1:4 straight or curved on plan to any radius complete all as specified and directed |
| 19 | Dismantling floor,hearth or wall tilling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off premises complete all as specified and as directed. |
| 20 | Demolition Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including floor finishes complete all as specified and as directed. |
| 21 | Material and labour for PCC(1:3:6) type C1 using 20mm graded aggregate as in plinth protection of avg 75mm thick and finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 22 | Material and labour for 25 mm thick Cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in sub base correcrion floors, surface fair finished and even and rough to receive floor finishes complete all as specified and as directed. |
| 23 | Material and labour for Non - skid jointfree coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6complete all as directed. |
| 24 | Material and labour for Non - skid joint free coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,as in skirting over and including 10 mm thick backing coat with cement mortar 1:4 complete all as specified and as directed. |
| 25 | Material and labour for glazed ceramic coloured tiles 450x300x7mm thk on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as directed. |
| 26 | Material and labour for non–skid ceramic coloured outdoors paver tiles10mm thick (square /rectangular) area of each tiles exe 0.06 sqm but n exe 0.11 sqm, in skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing coat with cement mortar 1:4 complete all as specified and as directed . |
| 27 | Demolition of stone slabs of any description or any thickness laid bedded and pointed in any mortar in floors and walls approns etc. complete all as specified and as directed. |
| 28 | Rounding to edges of stone slabs one edge such as in steps & platform etc complete all as specified and as directed. |
| 29 | Material and labour for machine cut green marble stone slab flooring 16 - 18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 30 | Material and labour for machine cut green marble stone slab flooring 16 - 18 mm thick as in skirting / dado over and including over and including 10 mm thick rendering in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and as directed. |
| 31 | Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 32 | Material and labour for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in slabs, suported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 33 | Material and labour for formwork to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exc 200 mm thick horizontal or sloping , rough finished flat surfaces complete all as specified and directed |
| 34 | Material and labour for form work for concrete flats teads exc 5 cm but n exc 10cm wide rough finished complete all as specified and as directed. |
| 35 | Supply and fixing for mild steel TMT bars 10mm dia and over, cut to length & bent to shape required including cranking, bending spirally for hoping for column, hooking ends & binding with and including mild steel wire not less than on 0.9mm dia or securing with clips complete all as specified and as directed. |
| 36 | Taking down frames with shutters n exc 1.50 Sqm each with shutter without taking off shutters from the frame. complete all as specified and as directed. |
| 37 | Taking down frames with shutters exc 1.50 Sqm and n.exe 4 sqm each with shutter without taking off shutters from the frame complete all as specified and as directed. |
| 38 | Supply and fixing of factory made single extruded WPC (Wood PolymerComposite) solid door/ window/ Ceosetory windows & other frames/chowkhat of size 100 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with mild steel hold fast of required dia and length, complete all as specified and directed.NOTE : - (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made.(ii) Material manufacture test certificate should be provided before execution of work. |
| 39 | Supply and fixing of factory made single extruded WPC (Wood PolymerComposite) solid door/ window/ Ceosetory windows & other frames/chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with mild steel hold fast ( 35mmx35mmx3 MM ) of required length complete all as specified and as directed.NOTE : - (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made.(ii) Material manufacture test certificate should be provided before execution of work |
| 40 | Supply and fixing for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast of required size and length, complete all as specified and as directed. |
| 41 | Supply and fixing for factory made coloured solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 42 | Supply and fixing of coloured factory made single extruded WPC (Wood Polymer Composite) solid decorative type moulded door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing all as per specification & drawing complete all as specified and directed |
| 43 | Supply and fixing of coloured factory made single extruded WPC (Wood Polymer Composite) gauzed decorative type plain ( Jointless ) door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing all as per specification & drawing complete all as specified and as directed.Note : wire mesh shall be paid seperately |
| 44 | Supply and fixing for double shutter steel window box type ERW hollow P section comprising of glazed/gauged skeleton shutter fabricated from following sections :-(a) ERW hollow P section frame of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos i.e. 01 for glazed shutter and 01 for gauzed shutter ). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces. (b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mm x25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leaf of T – section 20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed winodw leaf .(c) Vertical mullion shall be ERW hollow T -section of size 60 x 25 mm made from 1.25 mm thick MS sheet (d) The above steel window shall be deemed to include the following accessories/ fittings: |
| 45 | i) Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape- 04 Nos per window ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf.iii) MS tower bolt stove enamelled 150mm long- 2 Nos per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 No per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 No per leaf (vi) Pintal hinges 12 x 75 mm - 2 Nos each leaf (vii) 10mm square Guard bar @ 10 cm c/c welded to frame .(viii) Two coat of Synthetic enamel paint over one coat of red oxide primer.(ix) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in gauzed skelton shutter of window with flat iron 15 x 03 mm with steel screws .(x) 3mm thick sheet glass, ordinary quality and with oil putty in square n. exc 0.5 sqm in each pane fixed in glass shutter of window.(xi) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and as directed.Notes : (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit.(ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessoriries as mentioned above.(iii) The window upto 1.00 metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are openable. The window more than 1.00 metre width shall have two openable leaves on both outer side for gauzed shutter and glazed shutter and middle leaf/shutter shall be fixed type. |
| 46 | Supply and fixing box type using ERW hollow 'P' section ventilators fixed type with glazing bar including MS grills of square bar 10mm dia @ 100 c/c complete with glazing bars dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer ,complete all as specified and as directed. |
| 47 | Supply and fixing of ordinary glass 3mm thick with oil putty in square n exc 0.50 sq in each pane complete all as specified and as directed. |
| 48 | Supply and fixing for bands hold fast etc including welding confirm to fe 290 Gde E 165 complete all as specified and as directed. |
| 49 | Supply and fixing for stainless steel wire cloth.0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 50 | Supply and fixing for 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pine including screwing or welding to MS / PVC frame ( as required ) complete all as specified and as directed. |
| 51 | Supply and fixing in Alumminium handles 150 mm,cast type ,anodised complete all as specified and as directed. |
| 52 | Supply and fixing for mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate including welding or screwing to MS frame complete all as specified and as directed. |
| 53 | Supply and fixing for 150mm long aluminium anodized barrel tower bolt of extruded sectioncomplete all as specified and as directed. |
| 54 | Supply and fixing for 200mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and as directed. |
| 55 | Supply and fixing for 250MM long aluminium anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheets cast of excruded section and fixing bolt and sliding complete all as specified and as directed. |
| 56 | Supply and fixing for GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes complete all as specified and as directed. |
| 57 | Supply and fixing for GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes complete all as specified and as directed. |
| 58 | Supply and fixing as in repair looking mirror of size 600x 450mm bevelled edge mirror of selected quality glass , mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 59 | Supply and fixing in repair Vitreous china orrisa pan squatting pattern 580 X 440mm with integeral foot rests including P or S trap PVC low level flushing cistern 10 ltrs capacity and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and as directed.Note : The cost of traps , flushing cistern and PVC flush pipes are included in this item. |
| 60 | Supply and fixing in repair vitreous china wash hand basin star white size 550mm x 400 mm including CI brackets, PTMT waste coupling,waste pipe 32 mm bore complete all as specified and as directed. |
| 61 | Supply and fixing in repair sinks made of stainless steel with drain board 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including providing and fixing cantilever CI brackets , waste pipe , waste coupling and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.Note : (i) The cost of waste coupling , PVC waste pipes are inclusive with this item and nothing extra will be admissible in to this account . |
| 62 | Supply and fixing in repair fancy type pillar taps of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 63 | Supply and fixing in repair 15 mm stop valves/Angle valse ,but fancy type, chromium plated , cast copper alloy,screwed down,high pressure, with flange cap , screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 64 | Supply and fixing in repair 15 mm dia Bib taps, long shank , fancy type cast copper alloy with crutch or butterfly handle, screwed down, crewed with flange cap for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 65 | Material and labour in repair Chromium plated shower rose 125 mm dia with shower arms with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed. |
| 66 | Supply and fixing in repair 15 mm concealed stop valves ,but fancy type, chromium plated , cast copper alloy,screwed down,high pressure, with flange cap , screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 67 | Supply and fixing in 15 mm dia 60 cm long PVC water connection with brass nuts ( Hot and cold ) and washers complete all as specified and as directed. |
| 68 | Supply and fixing as in repair CP ( brass body ) Towel Rail 600mm long fixed with and including Chromium plates brass screws and wooden /plastic cleats (minimum weight 170gms ) complete all as specified and as directed. |
| 69 | Material and labour for Stainless steel plate rack of size 31\\" x 30\\" x 10\\" of minimum thickness not less than 1.00 mm and load capacity not less than 30 kg including fixing with stainless stell screws including taking down of old plate rack of any description complete all as specified and as directed. |
| 70 | Supply and fixing in repair Stainless steel ( SS 202 grade ) Curtain rod 25 mm dia 0.80 mm wall thickness, mild steel, chromium plated including ornamental type supporitng and end brackets as per sample complete all specified and directed. |
| 71 | Material and labour for PVC (SWR) floor trap plain with CP grating including jointing with solvent cement outlet dia 100 mm in repair complete all as specified and as directed.Note : Cost of grating are included in this item. |
| 72 | Supply and fixing in repair CP Soap Dish complete all as specified and directed. |
| 73 | Supply and fixing as in repair, water storage tank, 500 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and including 20mm bore tank nipple & one 20mm GI union at outlet and including dismantling of water tanks and removing from site all as specified in SSR Part–I ,complete all as specified and as directed.Note : - The colour of tanks shall be white colour . |
| 74 | Cutting into existing manhole for connecting into new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section), in cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate, smooth finished and reforming benching as required for 75/110/100 mm bore PVC pipe, complete all as specified and as directed. |
| 75 | Desilting of manhole complete by removing all scum, sludge, silt (both organic and inorganic nature) by manual labour or mechanical scraper and disposal of the same and buried in trenches etc, as in foul condition for any depth complete all as specified and as directed. Note:- Sludge, scum, silt (both organic and inorganic nature) water shall be disposed off in closed container at authorized dumping site declared by local administration outside MD land. |
| 76 | Excavation in trenches not exc 1.50 mtr wide and n exc 1.50 mm in depth and getting out in soft/ loose soil for shafts, wells, cesspits, manholes, pier holes and NP2 pipes etc,. complete all as specified and as directed. |
| 77 | Returning filling in including spreading, levelling, watering and wall ramming in layer n exc not exc 25 cm, any kind of soil complete all as specified and as directed. |
| 78 | Removing execavated material n nexc 50m and depositing where directed at a level n exc 1.5m starting point complete all as specified and as directed. |
| 79 | Demolition and beaking up drain AC pipes/PVC pipe set in cement mortar 100 mm and below complete all as specified and as directed. |
| 80 | Supply and fixing for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floors , bore of the pipe 110 mm complete all as specified and as directed.. |
| 81 | Supply and fixing for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm complete all as specified and as directed. |
| 82 | Material and labour for concrete bed to 150mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid or tected in cement concrete (1:3:6) type C-2 ( using 40mm graded stone aggregate) complete all as specified and as directed. |
| 83 | Material and labour for concrete bed to 100 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid or tected in cement concrete (1:3:6) type C-2 ( using 40mm graded stone aggregate) complete all as specified and as directed. |
| 84 | Material and labour for 150 mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and as directed. |
| 85 | Material and labour for PCC 1:2:4 type B1 using 20mm traded stone aggregate as in benching of manholes including necessary form work and finishing all exposed surfaces of concrete complete all as specified and as directed. |
| 86 | Material and labour for providing precast RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in landings, precast cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including chamfers, weathering, throating, etc. and setting in cement mortar 1:4 complete with joints to match, complete all as specified and as directed. |
| 87 | Material and labour for PCC type C2 1:3:6 using 40 mm graded aggregate as in surface channels and drains complete all as specified and as directed. |
| 88 | Material and labour for extra for forming fair finished channel and drain 30 cm inner girth in cement concrete using extra cement complete all as specified and as directed. |
| 89 | Supply and fixing for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floor/trenches bore of the pipe 75 mm complete all as specified and as directed. |
| 90 | Supply and fixing for PVC(SWR) bends 110 mm dia. With access door complete all as specified and as directed. |
| 91 | Supply and fixing for PVC(SWR) bends 75 mm dia.with access door complete all as specified and as directed. |
| 92 | Supply and fixing for PVC(SWR) junction double,(double T),equal or unequal. 110 mm dia with access door complete all as specified and as directed. |
| 93 | Supply and fixing for PVC (SWR) junction single, (Single T) equal or unequal with access door 110 mm bore complete all as specified and as directed. |
| 94 | Material and labour for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement including taking down old gully traps of any description complete all as specified . |
| 95 | Supply and fixing for PVC (SWR) vent cowl of 75 mm bore complete all as specified and as directed. |
| 96 | Supply and fixing for PVC (SWR) reducer of 75 x110 mm bore complete all as specified and as directed. |
| 97 | Taking down cement plaster on brick or stone surfacs including raking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed. |
| 98 | Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smoth without using extra cement with using water proofing compund @200 ml per bag of cement or as per manufacturer's instructions complete all as specidfied and directed.Note : WPC shall be measured and paid seperately under respective items |
| 99 | Material and labour for rough cast plaster complete as specified in SSR Part–I, clause 14.22 shall consisting of following :– firstly apply under coat in cement mortar 1:3 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied, complete all as specified and as directed. |
| 100 | Material and labour for preparation of newly plastered or un-plastered surfaces on walls ,chajjas , roof projection , cornices of brick /concrete surfaces etc. and applying two coats of cement based paint (white or tinted) over a coat of alkali resistant primer , complete all as specified and as directed |
| 101 | Material and labour for preparation of new plastered surface of applying two coats of weather proof exterior emulsion paint over and including priming coat of exterior primer over and including and 2-3mm of wall care putty white cement based putty over and including preparation of surfaces of walls or ceiling and soffits of brick or concrete surfaces to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and as directed. |
| 102 | Material and labour for rendering 15mm thick on fair faces of brick or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specidfied and directed. |
| 103 | Material and labour for preparation of new plastered surface of applying two coats of acrylic distemper over a coat of alkali resistant primer over two coat of wall care cement based putty over and including preparation of wall surfaces to be applied with Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper/ primer should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and as directed. |
| 104 | Material and labour for preparation of newly plastered surfaces of walls and applying two coats of white wash complete all as specified and as directed. |
| 105 | Material and labour for rendering 5 mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed. |
| 106 | Material and labour for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and as directed. |
| 107 | Material and labour for complete removal of existing treatment on walls by with mechanical / electrical driven grinders suitable for removal work and scrapping washing rubbing down etc and applying two coats of oil bound emulsion over and including two coats of acrylic based wall care putty with one coat of primer complete all as specified and as directed. |
| 108 | Material and labour for preparation of old decorated surfaces on walls ,chajjas , roof projection , cornices of brick /concrete surfaces etc. and applying two coats of cement based paint (white or tinted) complete all as specified and as directed. |
| 109 | Material and labour for preparation of old decorated surfaces of walls and applying two coats of white wash complete all as specified and as directed. |
| 110 | Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 111 | Material and labour for painting on new steel surfaces and priming with red oxide primer of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 112 | Material and labour for painting two coats of synthetic enamel paints on old wooden surfaces of girth exc 10CM , including preparation of surfaces complete all as specified and as directed.. |
| 113 | Dismantling structural steel work in cluding doors, gates but excluding framed truss etc complete all as specified and as directed. |
| 114 | Supply and fixing for framed work as in door of angle or other section with gusset plate , rails , braces, etc complete drilled for fixing of steel sheeting or other covering. Door etc, to be prepared hanging or sliding with and including either hooks and hinges or steel hanging door fitting and hanging also fastening and fixing including one shop coat of zink chromate primer paint confirming to F-410W GDe-250 A complete all as specified and as directed. |
| 115 | Material and labour for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 116 | SCHEDULE 'A' (E/M PORTION):Taking down carefully aluminum point wiring (light, fan, socket or power) complete fittings such as switches, C/roses, Pendants DBs, sockets etc. including taking down carefully by unscrewing from boards/outlet/DBs/fittings such as switches, sockets, lamp holders, brackets, ceiling fittings bulkhead fittings, sketch fittings, tube light fittings, fan regulator, electric meters, meter box any type etc as directed by Engineer-in-Charge. All the removed material to be deposited to AGE E/M store yard or will be handed over to the contractor under schedule of credit and making good to the disturbed surface by plastering and two coat of distamper complete all as specified and as directed. |
| 117 | Material and labour for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade drawn through and including medium grade, ISI marked, PVC conduit,medium grade ISI marked not less than 20 mm dia with accessories fixed concealed/surface type on wall/ roof/ ceiling and including provision of 1.50 sqmm single core PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor green colour as earth conitnuity conductor and connected to common earth dolly with suitable size lugs, including mild steels sunken box or pressed steel terminal box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-1) of 1969 and IS:14772:2000 with earth dolly and coated with two coat of anti corrosive paint over a coat of red oxide primer both internally and externally with and including (provision of new) modular covered plate over sunken box for housing the modular switches, socket outlets., fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for :-Note:-1 Modular metal flush / sunken box, and for modular switch/ socket cover plate & sheet are inclusive in the item rate quoted.2. Only switch, socket and fan regulators to be measured and paid seperately. |
| 118 | (a) One light/bell/fan/exhaust point controlled by one switch 6 amp one way |
| 119 | (b) One 3 pin switch socket combination 6 amp on the independent board. |
| 120 | (c) One 3 pin switch socket combination on same board with other switches. |
| 121 | Material and labour for concealed point wiring complete with 2.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade drawn through and including medium grade, ISI marked, PVC conduit,medium grade ISI marked not less than 20 mm dia with accessories fixed concealed/surface type on wall/ roof/ ceiling and including provision of 2.50 sqmm single core PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor green colour as earth conitnuity conductor and connected to common earth dolly with suitable size lugs, including mild steels sunken box or pressed steel terminal box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-1) of 1969 and IS:14772:2000 with earth dolly and coated with two coat of anti corrosive paint over a coat of red oxide primer both internally and externally with and including (provision of new) modular covered plate over sunken box for housing the modular switches, socket outlets., fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for :-Note:-1 Modular metal flush / sunken box, and for modular switch/ socket cover plate & sheet are inclusive in the item rate quoted.2. Only switch, socket and fan regulators to be measured and paid seperately. |
| 122 | Material and labour for switch modular type 6 Amp a way 1 module 230 volts complete all as sprecified and as directed. |
| 123 | Material and labour for switch modular type 16 Amp a way 1 module 230 volts complete all as sprecified and as directed. |
| 124 | Material and labour for socket modular 2/3 pin, 6 A one way 2 module 230 volts complete all as specified & as directed 2 module. |
| 125 | Material and labour for socket modular 2/3 pin, 6/16 A one way 2 module 230 volts complete all as specified & as directed 2 module. |
| 126 | Supply and fixing for Modular Bell Push 6 Amps one module complete all as specified and as directed. |
| 127 | Supply and fixing for electric bell AC, ding-dong type, 230 Volt, single pole complete all as specified and as directed. |
| 128 | Supply and fixing for ceiling rose 65x50mm three terminals 230 volt all as specified. |
| 129 | Supply and fixing for lamp holder,PVC/Polycarbonate type with back plate suitable for batten fitting with 12W lED bulb. |
| 130 | Supply and fixing for socket electronic type fan regulator modular 120 watt 2 module complete all as specified and as directed. |
| 131 | Supply and fixing in replacement LED tube light fitting 1x18 watt, 230 volts in commercial channel with powder coated CRCA sheet housing with opal diffuser for LED with LED tubelight with high efficient LED in aluminium housing with clear & milky diffuser connecting with twin core twisted flexible copper conductor cable with suitable size rod complete with all accessories complete all as specified and as directed. |
| 132 | Supply and fixing for LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directred. |
| 133 | Supply and fixing in replacement LED bulk head 10 watt with pressure die cast aluminium housing high efficient LEDs including 10 watt LED bulb and enclosed with milky diffuser IP 66 protection complete all as specified and as directed. |
| 134 | Supply and fixing for LED Bldg Security Light Fittings of capacity 35 watt made up of die cast aluminium housing with black epoxy powder coating with cover heat resistance glass safety input voltage range 170 to 270 volts, industrial model with IP-65 protection and other connected accessories including service bracket of GI pipe 32 mm bore medium grade of length 0.9 mtr with MS clamps, bolts, nuts, and washers and suitable reducer for connecting fitting to GI pipe as required at site and two coats of synthetic enamel paint over one coat of red oxide primer on mild steel work and making electrical connection, including disconnecting and taking down existing old U/S fitting complete all as specified and as directed. |
| 135 | Material and labour for submain wiring with 2 runs of copper conductor FRLS PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 4 sqmm FRLS multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper complete all as specified and as directed. Note : Two runs of 4 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length. |
| 136 | Material and labour for submain wiring with 2 runs of copper conductor FRLS PVC insulated unsheathed cable 1100 volt grade 6 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 6 sqmm FRLS multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site. Note : Two runs of 6 sqmm cable alongwith one run of 6 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length. |
| 137 | Supply and fixing in replacement MCBs 5 to 40 amp SPN B curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specified and as directed. |
| 138 | Supply and fixing in replacement MCBs 5 to 32 amp SP B curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specified and as directed. |
| 139 | Supply and fixing in sheet metal MCB DBs 12 way with 200 Amps rated bus bar single pole and neutral with acrylic double door IP-43 fixed on wall duly grouted in solid block, including copper lugs/thimbles duly crimped for connection complete all as specified and as directed. |
| 140 | Supply and fixing in sheet metal MCB DBs 4 way with 200 Amps rated bus bar single pole and neutral with acrylic double door IP-43 fixed on wall duly grouted in solid block, including copper lugs/thimbles duly crimped for connection complete all as specified and as directed. |
| 141 | Supply and fixing in single pole neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A complete all as specified and as directed. |
| 142 | Supply and fixing in sheet metal enclosure triple pole & neutral(TPN) IP-54 with MCB TPN 63 Amp, 16 KA, 415 volts, 4 way with 200 Amp rated bus bar flush /surface mounting double door duly grouted in solid block wall or on wooden board in and including lugs/thimbles duly crimped for connection including making smooth the disturbed surface including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge. |
| 143 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store and refixing the same after completion of work including connection from ceiling rose to ceiling fan complete all as specified and as directed. |
| 144 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15mm bore(medium grade) and connected to earthing test point as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) and with 20mm bore GI pipe for watering including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm c/c both ways with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing as in repair complete all as directed by Engineer-in-Charge and earth testing on completion complete all as specified and as directed. |
| 145 | Note:- Amount of credit of Rs. 71,317.00 for retrieved materials is mentioned in Schedule of Credit Page No. 17 to 18 of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender