Tender For Emergent Work Repair And Maintenance To Existing Water Supply And Replacement Of Unsv Water Tank And Resuscitation Of Bore Well And Connected Works For Artom, Dimapur.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Aug 2026
11 days left
EMD
75000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dimapur → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Emergent Work Repair And Maintenance To Existing Water Supply And Replacement Of Unsv Water Tank And Resuscitation Of Bore Well And Connected Works For Artom, Dimapur.
BOQ
| Sl. No. | Item Description |
| 1 | TRNSFORMER WORKS |
| 2 | M/L Dismantling of existing 2 H P single phase pumping set from bore hole including replacement of the same by new pumping set of same capacity including following connected works :(a) Replacement of submersible cable single core of 6 Sqmm size -70 mtr (b) Replacement of CPVC pipe of 40 mm dia - 50 mtr (c) Development and washing of bore well Manually as per ground requirement -01 Job (d) Providing starter unit suitable for Pumping set -01 Job (e) Providing and lowering submersible pumping set of 2 HP (Kirloskar Brothers) - 01 Job |
| 3 | M/L Dismantling of existing 3000 GPH IRP including replacement of unserviceable parts including replacement of entire catalyst and push strainers etc. including painting of plant with suitable approved colour all as specified and directed at site. Necessary water analysis report to be submitted after completion. |
| 4 | M/L for carrying out Geo physical survey for Ground water exploration for electrical resistivity technique at different location spread at suitable intervals to find out delineation of lithological features area thickness of layers and most favourable site for ground water strata based on Geo logical parameters and deposition of sub surface formation aquifer upto the depth of 200 mtrs and subimitted a detailed report in regards and as per direction of Engineer-in-Charge (1 Spot per Job) |
| 5 | Boring/drilling bore well of 300 mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipment's, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. (All types of soil) |
| 6 | Boring/drilling bore well of 300 mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipment's, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. (All types of soil) |
| 7 | Boring/drilling bore well of 300 mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipment's, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 150 metre & upto 200 metre depth below ground level. (All types of soil) |
| 8 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) blend pipe of required dia upto 200 mm dia , conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, asper direction of Engineer -in-charge. Note :- Make: Supreme/Finolex and or equivalent make. |
| 9 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well slotted pipe of required diaupto 200 mm dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, asper direction of Engineer -in-charge. Note :- Make: Supreme/Finolex and or equivalent make. |
| 10 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of 200 mm dia |
| 11 | Providing and fixing M.S. clamp of 200 mm dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. |
| 12 | Providing and fixing Bail plug/ Bottom plug of 200 mm dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). |
| 13 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. |
| 14 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \\"V\\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 15 | Supply & fixing of column pipe heavy duty CPVC Pipes 50 mm dia ISI Marked etc., all as per requirement and direction of Engr-in-Charge |
| 16 | Supply, installation, testing and commissioning of Submersible pump set, electric driven 415Volts, Three Phase suitable for 200 mm dia bore well (casing pipe size 200/150 mm) supply and complete inclusive of 10 meter long submersible cable and starter etc., all as per requirement and direction of Engr -in-Charge Make: Kirloslar and equivalent make). |
| 17 | Supply and fixing of Submersible cable weather proof of size 6 Sqmm three phase copper conductor including necessary connected items as per site requirement will be provided and as per direction of Engr-in-Charge Note:- Make: Havells/ Finolex and equivalent make. |
| 18 | Supply, installed, testing and commissioning of Mono block centrifugal pump set 415V (Kirloskor) Model No KDS 822+3 Phase size 100 x 100 mm, including foundations of pumpset,Constr of shed and motor including PCC and requirement of angle iron fitted with nuts and bolts having size 1 mtr x 1mtrx 0.4 mtr and all other necessary items as required at site for smooth running of pump and motor complete etc., all as per requirement and direction of Engr-in-Charge.(01 X for Stand By). The motor cost inclusive of automatic star delta starter, P.C.C foundation, Construction of Open Shed and proving Electric connections to near by main switches. |
| 19 | Providing and fixing 40 mm dia CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass thread fittings, includes, jointing of pipes fittings with CPVC slovant cement, threading, trenching, refilling & testing joints complete etc., all as per requirement and direction of Engr-in-Charge. (Make: Supreme/Finolex and or equivalent |
| 20 | Providing and fixing 25 mm dia CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass thread fittings, includes, jointing of pipes fittings with CPVC slovant cement, threading, trenching, refilling & testing joints complete etc., all as per requirement and direction of Engr-in-Charge. (Make: Supreme/Finolex and or equivalent |
| 21 | Providing and fixing Butter fly valve 50 mm with CI wheel of approved quality etc., all as per requirement and direction of Engr-in-Charge. |
| 22 | Providing and fixing gun metal gate valve 40 mm with CI wheel of approved quality etc., all as per requirement and direction of Engr-in-Charge. |
| 23 | Providing and fixing gun metal gate valve 25 mm with CI wheel of approved quality etc., all as per requirement and direction of Engr-in-Charge. |
| 24 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 25 | Supply, installation testing and commissioning of LT panel board outdoor type, fabricated out of 3.15 mm thick MS sheet incl rain reviling system and painted with synthetic enamel paint two coats over a coat of red oxide primer and with following accessories incl internal wiring by using suitable size of copper conductor : (i) MCCB 63 Amp TPN (Out going) :- 01 No(ii) Digital Ammeter 0 to 500 amp :- 01 Nos(iii) Digital voltmeter 0 to 500 V with selector switch l: 01 nos(iv) Star delta starter suitable of 10 HP submersible pump :- 01(v) Single phase preventer :- 01 No (Testing will be done after completion) (vi) PCC foundation (size 2.0 x 3.0x 0.150 meter) 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20/40 mm nominal size), i/c necessary excavation etc., |
| 26 | Supply, Installation testing and commissioning of GRP modular panel tank (Glass Reinforced Plastic) of 2.5x2.5x2.5 mtr (15625 ltr capacity on existing Steel staging of following specification :-(a) Tank panel thickness (i) Base Panel : minimum 10 mm thick(ii)Side Panel : minimum 8 mm thick(iii) Roof Panel : Minimum 3 mm thick Accessories :-Internal external reinforcementMan hole cover with lockable systemWater level indicatorOver flow drain and inlet and out let connection with PVC /GI fittingsISMB foundation of suitable size on 18 mtr staging Removal of 2.5x2.5x2.5 mtr PS tank from 18 mtr staging by using scaffolding of MS pipe/Bamboos suitable load bearing capacity.Retrieved material will be the property of contractor which the amount estimated in this scope Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender