Tender For Operation & Maintanance Of Badopal Pump House For A Period Of One Year
Tender Value
1.21 Crore
Estimated cost
Bid Submission
18 Aug 2026
1 days left
EMD
2.43 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Operation & Maintanance Of Badopal Pump House For A Period Of One Year
BOQ
| Sl. No. | Item Description |
| 1 | Operation & maintenance of Pumping Station having pump units running on LT power supply, including routine repair & maintenance of pumping machinery i.e. VT pump & LT motors with accessories, LT panel of all types, switchyard equipment, various transformers, EOT crane etc |
| 2 | Supply of Rubber bearing (bush) of Material cutless neoprene rubber including outer shell ofmaterial BRONZE/GUN METAL Inner Diameter 50-70 mm |
| 3 | Supply of Adjusting/Chuck Nut In bearing assembly (Material Mild steel) |
| 4 | Temporary compensation for the land with crop i.e. for six months period.for uncommand area |
| 5 | Labour Work :- Servicing of 6.6 KV Vertical squirrel cage three phase induction HT motor carrying out minor repair of the coils & insulation of the stator/rotor. Decarburization / cleaning /heating /varnishing / baking of stator winding for protection against moisture, dirt/dust and rotorlamination for any hot spot after conducting magnetic flux loop test .Repair of damaged insulationof HT leads &. re-enforcing loose lugs. Checking/regreasing of bearings of DE & NDE side &Fixing of new bearings if required with making of bearing hub sheet, Checking the Shaft trueness,Checking and repair work of end shield cover, Repair/ replacement of RTD/ BTD/ space heater &missing & broken wedges from new magnetic wedges, cleaning & leakage repair of water radiatortubes, painting of motor, Final testing of Motor like following tests as IR Value test, Resistancetest, inductance test & submit the test report. Testing, Trial of motor on site (supply of Bearing,RTD,BTD,space heater,temprature meter not in scope of work) 150 KW |
| 6 | Transportation charges for 6.6 KV HT Motor repair/servicing/rewinding from site to workshop& from workshop to site 150 KW-300 KW |
| 7 | Dynamic balancing of rotor of 3.3 HT induction motor as per grade G2.5 150 KW |
| 8 | Shaft Metalizing of rotor shaft of 3.3 KV HT induction motor 150 KW |
| 9 | Bushing on end shield cover of 6.6 KV HT induction motor 150 KW |
| 10 | Supply of impeller shaft fitted with shaft sleeves for following rating pump (material SS-410)0.631 cumec (22 cusec) pump of static head 5 meter |
| 11 | Supply of shaft sleeve (material SS-316) Inner Diameter 50-70 mm |
| 12 | Repair of shaft of VT pump by Groove making at bearing points of shaft for making equaldepth for welding, Welding at bearing points of shaft, Machining and grinding at bearing points ofshaft to bring its original diameter, Bend removal of shaft to bring it prefect straightness, Repair ofkey way of shaft according to keys and Repair of threads. 0.57 cumec to 1.7 cumec pump |
| 13 | Supply of Thrust collar Half for muff coupling of material SS-304 for following shaft diameterDiameter 50-70 mm |
| 14 | Supply of Richet pin for VT pump 0.57 cumec to 1.7 cumec pump |
| 15 | Rubber ring set for D/R coupling of pump |
| 16 | Supply of motor pulley (coupling) with coupling nut and bolts, keys (to couple VT Pump with motor) |
| 17 | Supply of Pump pulley (coupling) with coupling nut and bolts, keys (to couple VT Pump with motor) |
| 18 | Supply of intermediate shaft fitted with shaft sleeves for following rating pump (material SS-410) 0.631 cumec (22 cusec) pump of static head 5 meter |
| 19 | Supply of Top shaft fitted with shaft sleeves for following rating pump (material SS-410)0.631 cumec (22 cusec) pump of static head 5 meter |
| 20 | Labour Work :- Service and Overhauling of VT Pump by Removing motor from stool withdisconnecting electric connections, removing of complete pump assembly stepwise andDismantling of pump, Gas cutting, ,welding , Cleaning all components of pump by chip hammersand paper etc,, insertion/replacement of damaged parts like shaft sleeve, rubber bush, glandbush etc, reassembling of pump parts and refitting of pump stepwise in position coupling of motoron stool , testing and trial of pump (supply of spare Parts not in scope of work) 0.566/0.64 cumecpump |
| 21 | Preventive maintenance work of Transformer at site by Cleaning of all outside part oftransformer, Filtration of transformer oil, Providing and replacement of Set of gasket ofradiators/top cover & valve, damaged gasket of any other part ,including hydra/crane charges,Providing and replacement of valves in case of leakage, Providing and Replacement of brokenSundry items viz cover bolt, nut, plug cap, screw etc. ,tightening all nut bolt to prevention ofleakage, Providing and replacement of silica gel breather, Replacement of WTI, OTI, MOG, OILLEVEL INICATORS (Supply of WTI,OTI,MOG,OIL LEVEL INICATORS not in the scope of work)and painting from outside using two inner coat of Zink Chromate and two outer coat of gray paintat site250 KVA to 500 KVA |
| 22 | Supply of Gland bush (Material Gun Metal) Inner Diameter 50-70 mm |
| 23 | Rebuilding of impeller blades of VT pump with welding, machining & grinding up to originaldiameter, Balancing of impeller and shape of impeller blades. 0.57 cumec to 1.7 cumec pump |
| 24 | Supply of muff coupler including thrust collar halfs, Coupler cap, key, allen HEAD CAPscrews etc as per existing design material SS 410 Inner Diameter 50-70 mm |
| 25 | Supply of Key for Propeller/impeller of (material SS-410) |
| 26 | Grease servo gem 3 |
| 27 | Lubricant oil servo system 32 |
| 28 | Lube oil |
| 29 | channel HD NVR for CCTV camera setup |
| 30 | 2 TB hard disk with 2 years warranty |
| 31 | LED/Monitor 21.5 inch For CCTV |
| 32 | Rubber sheet blank |
| 33 | Removing white or colour wash by scrapping and sand papering and preparing the surfacesmooth including necessary repairs to scratches etc. complete |
| 34 | Replacement of Thrust bearing of VT pump by Decoupling, removing of motor from stool,removing of coupling and bearing hub assembly, dismantling of bearing hub assembly,replacement of defective bearings, assembling of bearing hub assembly. Fixing work of bearinghub assembly, oil filling, fixing of coupling and motor, testing and trial of pump 0.57 cumec to 1.7cumec pump |
| 35 | Distempering with oil bound washable distemper of approved brand and manufacture to give aneven shade : 33.48.1 Old work (one or more coats) |
| 36 | Replacement of defective compressor by company repaired compressor as per OEMrecommendations of following gadgets including testing etc. as required. Replacement of materialor components shall be use as per guidelines of OEM of original product. All the scrap materialshould be retained by the contractor.1.5 TR A.C. |
| 37 | Supplying and charging of fresh refrigerant and testing of performance of air conditioner/ fridge/water cooler of following capacity including capillary and strainer/ filter |
| 38 | Kota stone slab flooring 25mm thick over 20 mm (average) thick base laid over and jointed withgrey cement slurry mixed with pigment to match the shade of the slab including rubbing andpolishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 30.25.1 Area ofeach slab 900 to 2000 sqcm |
| 39 | M.S. Clamps |
| 40 | Providing, lowering, laying, aligning, fixing in position at and jointing at all level/ depths ISImarked HDPE pipes of PE-100 grade and PN 6 for sewer application as per IS 14333-1996(amended upto date) in trenches in complete including all material, labour, sectional hydro testing(including the cost and conveyance of water to site for testing) and commissioning as perTechnical Specifications and as per direction of Engineer. Note: E/w to be measured and paidseparately. Length of pipe shall be measured in between the outer wall of two manholes /Inspection chambers. Pipe in the manhole/inspection chamber's wall shall deemed to be includedin the item of manhole/inspection chamber shall not be payable. |
| 41 | Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming ofbottoms, including getting out the excavated material, refilling after laying pipe/ foundation anddisposal of surplus excavated material at a lead upto 50m suitable site as per direction ofEngineer for following depths, below natural ground / Road top level. 4.10.1 In all types soils/saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc |
| 42 | Providing & Fixing of IK08, IP 66 protected 100 Watt High Power LED Flood Light with singlepiece Pressure die cast aluminium housing, toughened glass diffuser with suitable lenses on LEDto achieve various beam angles.BIS certified and Trade mark certified.OEM Must have its own inhouse NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report withliable warranty of product/accessories from OEM shall be submitted |
| 43 | Fixing charges of new water seal including punching hole and nut bolt complete in all respect |
| 44 | Providing and fixing Sole plate for Pump foundation including Grouting with cement grade GP2,Concrete work, surface preparation by chipping, leveling,Fixing foundation bolts, Fixing of studsfor motor stool fixing, matching with existing system. work shall be carried out as per pre approveddesign drawings, Foundation plan |
| 45 | Providing and fixing of Gland packing Box for VT pump complete with all accessories likeGrease cup with NRV, packing pieces, gland bush (Gun metal) ,Gland Box cap (gun metal) ,water slinger assembly (C.I.), gasket etc, Decoupling of motor, removing of motor from stool,removing of coupling and bearing hub assembly, dismantling existing gland box from pump, fittingof new Gland packing Box , recoupling and fitting of motor on stool, testing and trial of pump.0.631 cumec (22 cusec) pump of static head 5 meter |
| 46 | SPARE PARTS FOR HEM MACHINE AND TRUCKCartridge(Part Of Prefilter) |
| 47 | 1000 mm dia Stain less steel AISI 304 Expansion bellows of 10/16 bar rating |
| 48 | Providing and fixing of Thrust bearing housing for vertical wet well type pump with allaccessories like oil retainer sleeve, retaining washer, adjusting nut(chuck nut) ,dial type temp.indicator, mounting cover, oil fill port with plug, oil level sight window assy as per existing design ofpump including work of Decoupling of motor, removing of motor from stool, removing of couplingand bearing hub assembly, fitting of new Thrust bearing housing , recoupling and fitting of motoron stool, testing and trial of pump, work shall be carried out as per pre approved design drawings.(Excluding Bearings) 31 cumec (22 cusec) pump of static head 5 meter |
| 49 | Providing and fixing of Flange set of VT Pump assembly including of Design, drawing,fabrication, transportation- supply , fixing as per existing elbow- delivery pipe and civil structure,erection, testing, painting with applying two coat of zinc chromate red oxide primer and three coatof synthetic black enamel paint and complete commissioning all scope of works as perspecification with removing of old set. |
| 50 | Providing and fixing of casing liner for impeller casing /propeller casing of material SS-410in existing casing 0.631 cumec (22 cusec) pump of static head 5 meter |
| 51 | Providing and Fixing of pressure gauge for VT Pump including replacement of GI joints,nipples and proper arrangement Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender