Tender For Establishment Of Digital Library At Govt. Middle School Chachwal Pyt Chachwal Block Rajpura Under The Scheme Ddc For The Year 2026-27
Tender Value
6.11 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
2 days left
EMD
12220
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kathua → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Establishment Of Digital Library At Govt. Middle School Chachwal Pyt Chachwal Block Rajpura Under The Scheme Ddc For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in Exacavation by manual labour in foundation trenches including dressing of sides and ramming of bottoms,lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil- All kind of soil ( 1 m from cutting edge). |
| 2 | Providing and Laying in position cement concrete 1:5:10 ( 1 cement :5sand :10 graded crushed stone agg. 40 mm size) excluding cost of centring and shuttering all work upto plinth level |
| 3 | Providing & Laying in position cement concrete 1:3:6 (1 cement:3 fine sand:6 graded crushed stone aggregates 20mm size) excluding the cost of centring and shuttering all works upto Plinth level. |
| 4 | Supplying and filling of stone Boulders in Plumb concrete. |
| 5 | Providing and laying B.B Masonary FPS bricks second class Cement mortar 1:6 ( 1 cement : 6 coarse sand) mix and curing complete in super structure |
| 6 | Extra for brick work in super structure above plinth level upto floor V level by manual means. |
| 7 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Reinforcement for R.C.C work including cutting,straightening, bending, placing in position and binding all complete. |
| 11 | Centring and shuttering including strutting,propping etc and removal of form work: A) Foundations, footings, bases of columns etc. for mass concrete. |
| 12 | Centring and shuttering including strutting,propping etc and removal of form work: B) Columns, pillars, piers, abutments, posts and struts. |
| 13 | Centring and shuttering including strutting,propping etc and removal of form work: C) Sides and Soffits of lintel & beams |
| 14 | Centring and shuttering including strutting,propping etc and removal of form work: D) Suspended floors, roofs, landings, balconies and access platforms |
| 15 | Centring and shuttering including strutting,propping etc and removal of form work: E) Edges of Slab under 20cm wide |
| 16 | 6mm thick cement plaster of 1:3 mix (1 cement : 3 fine sand) in ceiling |
| 17 | 12 mm thick cement plaster of 1:4 mix ( 1 cement : 4 fine sand) |
| 18 | 15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 4 ( 1 cement : 4 fine sand) |
| 19 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make like kajaria, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm |
| 20 | Making plinth protection 50mm thick of cement concrete 1:3:6 graded crushed aggregate 20 mm n/s over bed of dry brick blast 40mm n/s well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 21 | Distempring with ist quality oil bound distemper of approved manufacture and of required shade and colour on new work including primer coat of cement primer |
| 22 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 23 | Applying priming coat with With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade . two or more coats on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 25 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 10.14.1 Profile B - Fixing with adjustable lugs with split end tail to each jamb |
| 26 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) shutter glass panes including black enamelled lSI marked M.S. 30mm butt hinges with necessary screws thickness 30mm(Second class Kail wood)- 35mm |
| 27 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws(Second class Kail wood)- 35mm |
| 28 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete second class Kail wood-35mm. |
| 29 | Providing and fixing panelling or panelling and glazing in panelled or panelledand glazed shutters for doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.Particle Board 12mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked |
| 30 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm |
| 31 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : a. 200x10 mm |
| 32 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : b. 100x10 mm |
| 33 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. a. 125mm |
| 34 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. a. 100mm |
| 35 | Providing and laying electric points complete in all respect as per necessity at site including laying of PVC conduit pipes/pipe bend/ junction box/module/round box iron box for light point including wiring and switches of approved make as approved by Engineer-in-charge and fixing of switches, installation and testing complete Job |
| 36 | Add cost of CIB |
| 37 | Carriage of sand 5 km by Mt |
| 38 | Carriage of stone aggregate by 5 km by MT |
| 39 | Carriage of bricks 5 KM by MT Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender