Tender For Repair/ Maintenance Of Joinery, Guard Bar, Wire Mesh, Glass Panes, Flooring And Other Misc B/R Works In Domestic Area At Af Stn Sulur
Tender Value
45 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
14 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruppur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Joinery, Guard Bar, Wire Mesh, Glass Panes, Flooring And Other Misc B/R Works In Domestic Area At Af Stn Sulur
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GARRISON ENGINEER (AF) SULUR NAME OF WORK : REPAIR/ MAINT OF JOINERY, GUARD BAR, WIRE MESH, GLASS PANES, FLOORING AND OTHER MISC B/R WORKS IN DOMESTIC AREA AT AF STN SULUR CA NO: GE(AF)/SUL/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | S&F One piece EWC with slim soft close seat cover, S trap 300mm and size 690x360x740mm Snow white (excluding fixing bolts, flushing cistren and flushpipe) complete fixed including taking down existing damaged one of any make complete as specified and as directed.Make: Cat No: S1013240 of CERA or Techno-commercially equivalent in Hindware, Prayag, Parryware |
| 3 | S&F in repair kitchen plate rack of size 650 mm x 900 mm made up of 1mm thick stainless steel complete all as specified and directed. |
| 4 | M&L for repairs to ends of chajjas/ parapets by removing old concrete, loose material ,& cleaning of the reinforcement and finishing the surface in cement mortar 1:3,mixed with wpc finished fair & even and making good with existing finishes complete all as specified and directed. Note: Rate quoted by the tenderer shall be deemed to inclusive of water proofing compound. |
| 5 | Taking down chowkhat or frame(wooden/steel) not exceeding 1.5 Sqm each with shutter (with out taking off shutters from the frame) complete all as specified and as directed. |
| 6 | Taking down chowkhat or frame(wooden/steel) exceeding 1.50 Sqm not exceeding 4.0 Sqm each with shutter (with out taking off shutters from the frame) complete all as specified and as directed. |
| 7 | Taking down shutters of any description exc 1.0 Sqm and not exc 2.0 Sqm each complete all as specified and directed. |
| 8 | Resecuring without taking down chowkhats or frames but with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed. |
| 9 | Resecuring without taking down chowkhats or frames but with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4 sqm each complete all as specified and directed. |
| 10 | M&L for cutting holes in brick walls exc half brick and not exc one brick in cement mortar for inserting hold fasts/lugs and making good dismantled portion in cement mortar 1:3 or 1:2:4 type B-1 concrete as required complete all as specified and as directed. |
| 11 | S&F MS work (flat iron) 25mm x 3mm thick, in small articles such as hold fast and similar small articles conforming to Fe 290 Gde E-165 including dismantling existing one complete all as directed. |
| 12 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified . |
| 13 | S&F Factory made Solid PVC Door Shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified. |
| 14 | S&F Second class hard wood plain, solid, straight Chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 15 | S&F 200 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed. |
| 16 | S&F in repairs 200 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed. |
| 17 | S&F 100 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed. |
| 18 | S&F in repairs 100 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed. |
| 19 | S&F Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm complete all as specified and as directed. |
| 20 | S&F in repairs Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm complete all as specified and as directed. |
| 21 | S&F 150mm extruded aluminum alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 22 | S&F 150mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminum alloy and fixed complete all as specified and as directed. |
| 23 | S&F 150mm extruded Extruded aluminium alloy handles, fabricated type, anodised including taking down existing one complete all as specified and as directed. |
| 24 | S&F 30 mm thick factory made flush shutter solid core construction with block board core and plywood face panels, comercial type on both faces complete all as specified and directed. |
| 25 | S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete all as specified and directed. |
| 26 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete all as specified and directed. |
| 27 | S&F 100mm long Butt hinges medium weight cold rolled stainless steel, and fixed complete all as specified and as directed. |
| 28 | S&F in repairs 100mm long Butt hinges medium weight cold rolled stainless steel, fixed to wooden frame/welded to metal frame complete all as specified and directed. |
| 29 | S&F Butt hinges 75 mm long medium weight cold rolled stainless steel complete all as specified and as directed. |
| 30 | S&F in repairs butt hinges 75 mm long medium weight cold rolled stainless steel complete all as specified and as directed. |
| 31 | S&F Factory made 2nd class hardwood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); all as specified and directed. |
| 32 | M&L for Preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 33 | M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. Note for item No 32.00 :- The Unit rate quoted shall be inclusive for Demolition of paver tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortar and removing of debris outside of MoD land |
| 34 | S&F in repairs Overhead Shower 95 mm (4”) dia with 3 flow Round Shape 3 Flow complete all as specified and as directed. Make :CAT Part No- F7020302AB of CERA or Techno-commercially equiavelnt in Prayag or Hindware or Parryware. |
| 35 | S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 36 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 37 | S&F in repairs 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. Make:-QT F2006461 HT F3001461 of CERA or Techno-commercially equiavelnt in Prayag or Hindware or Parryware. |
| 38 | S&F in repairs Vitreous China wash basin, white, flat back, size 580x450 (for Hospilal use) excluding taps, waste, chain and plug and porcelain stopper but including brackets any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed. |
| 39 | S&F in repair Pillar taps 15mm bore CP with capstan head screwed down high pressure screwed for iron pipe complete all as specified and as directed. Make:- Cat Part No.QT F2006101, HT F3001101 of CERA or Techno-commercially equiavelnt in Prayag or Hindware or Parryware. |
| 40 | S&F in repairs CP Hand shower (Health Faucet) with 1.20M braided hose pipe with 8mm bore wall Hook with N.R.V (Back Flow Preventor) complete all as specified and as directed.Make:- CAT Part No-F8030401AB of CERA or Techno-commercially equiavelnt in Prayag or Hindware or Parryware. |
| 41 | S&F in repairs 32mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms) complete all as specified and as directed. |
| 42 | S&F in repairs 40mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight 40mm-60 gms) complete all as specified and as directed. |
| 43 | Resecuring or easing & adjusting without taking down of door shutter exc 1 sq m and n exc 2 sq m each complete all as specified and as directed. |
| 44 | Resecuring or easing & adjusting without taking down of Shutters of any description n exc 1 sq. m each complete all as specified and as directed. |
| 45 | Taking down shutters of any description exc 1 sqm but not exc 2 sqm each and refixing same opening complete all as specified and directed. |
| 46 | S&F in repairs 25 mm outer dia of pipes 3-layer PPR concealed pipe SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain &brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 47 | S&F in repairs 20 mm outer dia of pipes 3-layer PP-R concealed pipe SDR 7.4 (PN16) UV stabilized andantimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain &brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or infloors etc complete all as specified and directed.Note for item No 45.00 & 46.00 :-(a) The unit rate shall be include for taking down existing GI pipe and connections and all fittings as directed.(b) The unit rate shall be include the cost of short lengths, with all pipe fittings such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc and fixing accssories such as pipe hooks, screws clamps etc(c ) Wall thickness of pipes shall be all as per IS : 15801 |
| 48 | S&F in repairs 20mm outer dia of pipes PPR gate valves (brass insert) as per requirement of sites complete all as specified and directed. |
| 49 | S&F in repairs 25mm outer dia of pipes PPR gate valves (brass insert) as per requirement of sites complete all as specified and directed. |
| 50 | S&F in repairs 25 mm PPR Ball valves (brass insert) as per requirement of the site complete all as specified and directed. |
| 51 | S&F in repairs CP 2 way bib cock with wall flange fancy type screwed down screwed for iron pipe for 15mm bore complete all as specified and as directed.Make:- CAT Part No- QT F2006163 of CERA or Techno-commercially equiavelnt in Prayag or Hindware or Parryware. |
| 52 | M&L Providing PCC 1:2:4 type B1 using 20mm graded stone aggregates as in roof or in any position to bring upto the slope of average thickness of 40 mm including demolition of existing concrete complete all as specified and directed. |
| 53 | S&F in repairs Bib Cock with wall flange screwed down screwed for iron pipe 15mm bore complete all as specified and directed.Make:- CAT Part No Qt F2006152 HT F3001152 of CERA or Techno-commercially equivalent to Parryware/Hindware/Jaguar |
| 54 | S&F in repairs Angular stop cock, valves high pressure screwed both ends iron pipe or for unioins 15mm dia, complete all as specified and directed.Make:- CAT Part No QT F2006201 HT F3001201 of CERA or Techno-commercially Hindware/Jaguar |
| 55 | Taking down cement plaster on brick or stone walls, or concrete or ceilings etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plastering complete all as specified and directed. |
| 56 | M&L for Rendering 15 mm thick in two layers on brick or concrete wall surfaces,first coat 10 mm thick in cement mortar 1:6 and 2nd coat 5mm thick in cement mortar 1:4 finished even and fair complete all as specified and directed. |
| 57 | M&L for Rendering 15 mm thick in two layers on stone masonary surfaces, first coat 10 mm thick in cement mortar 1:6 and 2nd coat 5 mm thick in cement mortar 1:4 finished other than fair face complete all as specified and directed. |
| 58 | M&L Preparation of new plastered surfaces wall and applying two coats of white washing on walls surfaces complete all as specified and directed. |
| 59 | M&L Preparation of new plastered surfaces wall applying two coat of OBD over a coat of primer complete all as specified and directed. |
| 60 | Supply Only integral water proofing compound complete all as specified and as directed. |
| 61 | Demolition of brick work masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and as directed. |
| 62 | M&L Precast cement concrete block masonry Type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and as directed. |
| 63 | M&L Providing precast cement concrete solid building blocks type C1 1:3:6 (20mm graded aggregate) or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar complete, in walls complete all as specified and as directed. |
| 64 | M&L Preparation of new plastered surfaces of walls, Chajja, balcony, facia etc. and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 65 | Demolition of cement concrete (reinforced) in of any description and in any position and removal of debris out of MoD land complete all as specified and directed. |
| 66 | M&L Reinforced precast cement concrete in 1:2:4 type B0 (using12.5mm graded stone aggregate) in Jallies, 75mm thick (measured solid) including all moulding but excluding frame set in cement mortar 1:4 complete all as specified and as directed. |
| 67 | M&L Precast RCC 1:2:4, Type B–1 using 20mm graded stone aggregate as in landings, cover slabs, chullah hoods, Chajjas, water troughs, mangers, Shelves and similar articles with plain faces including formwork, set in cement mortar 1:4 including dismantling existing damaged ones complete all as specified and as directed. |
| 68 | M&L High strength corrosion resistant TMT steel bar of grade Fe-500 , 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. |
| 69 | S&F in repairs Vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistren and flushpipe) and including seat cover for pedestal pattern complete fixed complete all as specified and as directed. |
| 70 | S&F in repairs Vitreous china squatting pan 'Orissa' Pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe ) including provision of lime concrete bedding fixed complete all as specified and as directed. |
| 71 | S&F in repairs PVC (SWR) 110mm bore P Trap complete all as specified and as directed. |
| 72 | S&F in repairs PVC (SWR) 110mm bore S Trap complete all as specified and as directed. |
| 73 | M&L Renewing glazed tiles in patches, area not exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed.Note for Item No 72.00 :-The rate included for cutting out broken tiles, removing and cleaning loose tiles, preparing bed removing rubbish, brooming and replacing old with new tiles to match, complete with all cuttings etc, that may be required. New tiles required is deemed to be included in the unit rate quoted. The unit rate is also including necessary bedding in cement mortor in cement mortar 1:4 not exceeding 15mm thick. |
| 74 | S&F for Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 75 | M&L Preparation of new steel surfaces over 10 cm girth and applying two coats of synthetic enamel paint including one coat of red oxide primer complete all as specified and directed. |
| 76 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed. |
| 77 | M&L preparation of plastered or un plastered old surfaces of walls, chajja, balcony, facia etc. by brooming down or steel wire brushing scrapping down, smoke shoots moulds, mass efforescent salt, treating oil and greasy spots etc and applying one coat of cement based paint over a coat of primer complete all as specified and directed. |
| 78 | Complete removal of existing treatment on old surface in walls, Chajja, balcony, facia etc by brooming down or steel wire brushing scrapping down, smoke shoots moulds, mass efforescent salt, treating oil and greasy spots etc and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 79 | M&L preparation of old plastered surfaces of external wall by using pressure washer, removal of all dirt and dust and applying one coat of exterior emulsion weather proof paint complete all as specified and as directed. |
| 80 | S&F in repairs Doom grating 125mm dia with waste hole of PTMT(minimum weight 40gms) Including taking down existing one complete all as specified and as directed. |
| 81 | S&F in repairs 10 litre capacity PVC flushing cistern low level white colour with inlet ball valve float and handle incl brackets complete all as specified and directed. |
| 82 | S&F Aluminium powder coated of three track sliding window outer frame top & sides (section no-20831) of size 92.0x31.75x1.5mm weighing 1.06 Kg/m, frame bottom (Section No 20832) of size 92.0x31.75x1.5mm weighing 1.248Kg/m , shutter to plain vertical (Section No 21093) of size 39x18x1.5mm weighing 0.634 Kg/m, shutter interlock vertical frame (section 21094) of size 39x18x1.55 weighing 0.734 Kg/m, shutter bottom horizontal frame (Section No 20551) size 40x20x1.5mm weighing 0.484 Kg/m, with powder coating of min thickness 50 micron , sliding type with out sash bars, 4mm thickness colour glass, rubber packing, snap beading screws with stainless steel wire mesh, including taking down existing window with chowkats of any size, complete all as specified and directed.Note: Minimum thickness of powder coating shall be 50 micron. |
| 83 | S&F in repairs factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. and provided with Clear Glass of Saint Gobain / Modiguard make with thickness of 4mm and stainless steel wire cloth of 0.19mm nominal dia. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed.Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 84 | S&F in repair Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.suspended with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long with steel dash fasteners carrying max load upto 8.1 Kg/Sqcm with 4mm thick designer ceiling board Including taking down existing false ceiling complete all as specified and as directed. |
| 85 | S&F in repairs 18/19mm thick both side Prelaminated particle board, interior grade, with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed. |
| 86 | S&F Second class hard-wood in scantlings timber framed and fixed clean sawn including taking down existing one complete all as specified and directed. |
| 87 | S&F for second class hard wood Plain fillets square, rectangular or triangular in section exc 3sqcm and not exc 6sqcm, clean sawn, secured with nails or brads including taking down existing one complete all as specified and directed. |
| 88 | S&F for second class hard wood Plain fillets bullnosed, splayed, chamfered or rounded on one edge or face, not exc 3sqcm, clean sawn, secured with nails or brads including taking down existing one complete all as specified and directed. |
| 89 | M&L Preparation of new wooden surfaces of any description, width or girth exc 10 cm and applying two or more coats of french polishing over a coat of wood filler on new works complete all as specified and directed. |
| 90 | M&L Vitrified Ceramic tiles 8 to 9 mm mm thick, dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertcal surfaces such as skirting/ dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including backing coat of 10 mm thick in Cement Mortar 1:6 complete including dismantling of existing tile and disposal of to outside MoD land all as specified and as directed. |
| 91 | M&L Vitrified Ceramic tiles 8 to 9 mm mm thick, dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer, 15 mm thick in Cement Mortar 1:6 complete including dismantling of existing tile and disposal off to outside MD land all as specified and as directed. |
| 92 | Note for item No 90.00 & 91.00 :- (i) Vitrified tiles are classified under group B1A of the international Standard for ceramic tiles ISO: 13006. Tiles shall be hard, dense, impervious and frost resistant. Water absorption of tiles shall be less than 0.5% and flexural strength (Modulus of Rupture) shall be more than 35 N/Sqmm. |
| 93 | M&L Glazed ceramic coloured tiles 450 x 300 mm x 7/8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles on vertical surface such as dado including 10mm thick 1:3 backing coat including taking down existing tile and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 94 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile of size exc 0.09 Sqm but n exc 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incuding screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:4 incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 95 | M&L in repairs Granite work (of any type) 18 to 20mm thick (table rubbed and polished including round edge) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 96 | S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as sepcified and directed. |
| 97 | S&F in repairs 25mm dia mild steel powder coated drapery rod out to length required without joint in between and fixed at openings complete all as specified and directed. |
| 98 | S&F in repairs Mild steel powder coated brackets for holding the drapery rod and fixed to wall with MS screw complete all as specified and directed. |
| 99 | S&F in repairs Mild steel powder coated fancy type brackets fixed at both the end of drapery rod of same colour and type of drapery rod complete all as specified and directed. |
| 100 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and M&L for 4mm thick plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass not exc 0.5 sqm each pane complete all as specified and directed. |
| 101 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and M&L for 4mm thick plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass exc 0.5 sqm each pane complete all as specified and directed. |
| 102 | M&L Checking of floor, plinth, plaster etc those requiring masonry work and carrying out minor repairs such as edges, patches etc, including petty repairs with material like sand, cement & aggregate to make it functional complete all as specified and as directed.The rates for plastering / plinth include the following:- (a) Preparing the surfaces.(b) Thickness of plaster/plinth key in joints, etc. (c) Anises, chamfers of any width, internal rounded angles upto 80mm in width or girth external rounded angles upto 80mm in width or girth.(d) All materials, labour and equipment & supply of integral waterproofing compound.(e) Scoring surface of plastering for key, where the surface is not required to be finished fair.(f) Plastering in patches (in repairs), exc 3 sq.m each patch, for preparing old walls to receive plastering. Nothing extra shall be admissible for matching with existing work etc. (g) Any individual patch (other than nail hole, plug hole, etc.) included for provided existing surface finish. |
| 103 | M&L Hardcore of gauge not exceeding 63 mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface including removal of existing complete all as specified and directed. |
| 104 | M&L Bullnosed chequered cement concrete tiles 32cm x 20cm x 30mm thick machine pressed set jointed and pointed in neat cement slurry as in treads and cut and polished using grey cement and pigments over screed bed or bedding layer of mortar 15mm thick for laying floor fnishes in cement mortar 1:4 including demolishing existing tiles laid bedded and pointed in any mortar complete all as specified and as directed. |
| 105 | M&L Chequered cement concrete tiles 30cmx30cmx25mm thick machine pressed set jointed and pointed in neat cement slurry as in floors and cut and polished using grey cement and pigments over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:4 including demolishing the existing tile laid bedded and pointed in any mortar complete all as specified and directed. |
| 106 | M&L 75mm thick, plain cement concrete 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregates), as in plinth protection/path/hardstanding including making joints @ 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement including demolition of existing damaged cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness and rubbish material shall be disposal to out side MoD land complete all as specified and as directed.Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm. |
| 107 | S&F in repair CP sink cock with swinging casted round shape spout screwed down screwed for iro pipe in repairs 15mm bore170mm long swivel spout and wall flange complete all as specified and as directed.Make : CAT part No QT F2006251 HT F3001251 of CERA or Techno-commercially equivalent in Parryware, Hindware. |
| 108 | S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 940mm x 455mm (37\\"x18\\") 1mm thick 34 grade complete all as specified and as directed.Make: Cat No: B4512101G DIANA GLOSS in CERA or Techno-commercially equivalent in Prayag, Nirali, Silvershine |
| 109 | S&F in repairs 600mmx450mm bevelled edge mirror ofselected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 110 | S&F in repairs PVC body cabinet mirror of size 500 X 400 mm of approved design and pattern complete all as specified and as directed. Make: Cat Part No 557 of Prayag or Techno-commercially equivalent make as approved by GE. |
| 111 | S&F in repair CP Soap dish complete all as specified and as directed.Make:- CAT Part No- F5003106 of CERA or Techno-commercially equivalent make in Prayag |
| 112 | S&F in repair Towel rail 24\\" long for wash basin complete all as specified and as directed.Make : CAT Part No-F5007103 of CERA or Techno-commercially equivalent make in Prayag |
| 113 | S&F in repairs 100 mm brass mortice lock vertical 4 lever complete all as specified and directed. |
| 114 | S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall complete all as specified and as directed. |
| 115 | S&F in repairs PVC bends 110mm bore complete all as specified and as directed. |
| 116 | S&F in repairs PVC (SWR) 110mm junction (single T) equal or unequal provided with access door complete all as specified and as directed. |
| 117 | S&F in repairs PVC (SWR) 110mm junction vent cowl complete all as specified and as directed. |
| 118 | S&F in repairs Stack clamps made out of 50 mm x 5 mm flat iron and 100 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore complete all as specified and directed. |
| 119 | S&F in repairs 150mm dia of half round ready made PVC (SWR) eaves gutter of pressure rating 6 kg/cm2 of approved make including necessary fitting like bend WC/MS clips etc complete all as specified and directed. |
| 120 | S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall along with all fittings heads bends etc complete all as specified and as directed. |
| 121 | S&F in repairs PVC (SWR) bends any radius 75 mm dia fixed to wall complete all as specified and as directed. |
| 122 | M&L Water proofing treatment to existing roofs as per details given below after complete removal of existing water proofing treatment and expose of top surface of RCC slab of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with water and using wire brush including removing debris to outside the MoD land complete all as specified and as directed :- |
| 123 | Notes:-(a) Surface should be free from any loose paint, dust or grease. Remove all existing bitumen coatings completely by using intense wire brushing, high speed water jet & vacuum cleaner for thorough cleaning of the surface to avoid ‘Peeling off’ problems.(b) All cracks at corner joints, channels and parapets should be properly treated. For filling cracks upto 3mm crack seal material of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical to be used. Bigger cracks, damaged portions & hollow areas must be repaired with polymer modified cement mortar. (c) Apply a coat of self priming smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical with 33% dilution with water using brush/roller on newly plastered surface after curing as per IS-456 and allow to dry for 4 to 6 hours (dilution & forced coverage requirement strictly as per manufacturer’s instructions).(d) After the primed surface has dried, apply first coat of water proofing smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical using brush/roller on the same primed surface & allow to dry for 4 to 6 hours.(e) Prepare to apply second coat of water proofing smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical using brush/roller on the same surface. The temp shall be maintained 25 to 35° C through out the all above application work.(f) In case of severe dampness an additional coat of damp proof materials to be applied.(g) The work shall be carried out through authorized and qualified applicators of the following manufacturers only. MOU to be submitted before commencement of work. Make : M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical(h) A performance guarantee certificate for 10 years shall be submitted by the contractor to the GE on completion of work as specified. |
| 124 | (j) The unit quoted rate shall be deemed to include for taking down of water pipeline, tanks, wires etc found on roof and refix at the original position after complete treatment of roof.(k) The unit quoted rate shall be inclusive of material, all labours, tools and plants including scaffolding required for working upto approx 7.5 mtr height from natural ground level(l) The unit rate quoted for item is deemed to include for removing of accumulated earth of any width and depth upto 15 cm cleaning/cutting the grass with hand operated petrol/kerosene driven grass cutting machine and removing the grass waste around 3 m from plinth protection to outside MoD land.(m) Adoption of necessary safety arrangement like safety belts, ropes, helmets, netting etc. which are required for safety of working labour at height exceeding 3 to 25 mtr height shall be mandatary and deemed shall be included in the unit rate quoted. |
| 125 | S&F in repairs PVC (SWR) 75mm bore junction (single T) equal or unequal provided with access door complete all as specified and as directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender