Tender For Special Repairs To Bathrooms And Joinery Of Tejas Block (Building No P-408) At Niat, Naval Base Kochi
Tender Value
2.17 Crore
Estimated cost
Bid Submission
11 Sep 2026
22 days left
EMD
2.92 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Bathrooms And Joinery Of Tejas Block (Building No P-408) At Niat, Naval Base Kochi
BOQ
| Sl. No. | Item Description |
| 1 | SPECIAL REPAIR B/RTaking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and directed. |
| 3 | S&F Aluminium powder coated three track sliding windows with three sliding shutters with glass panes and stainless steel jalli) including suitable beading channel gasket, rollers Maruthi lock with handles etc complete with following specification:-Frame :- 92.36mmx29.70mmx2.00mmShutter stiles, top & bottom :- 39mmx20mmx1.5mmPanel :- 5.00mm thick tinted/plain sheet glass of selected quality exc 0.50Sqm each pane fixed to aluminium frame with beading, rubber gasket. Mosquito proof jali:- Stainless steel jali 0.45mm nominal dia of wire and average width of aperture 1.40mm fixed type with appropriate size powder coated aluminium section on external faces of window. |
| 4 | S&F Aluminium powder coated side hung/fixed type/openable windows including suitable nylon beading channel gasket etc complete with following specification :- Frame :- 63.50mmx38.10mmx2.00mmPanel :- 4mm thick ACP sheet / 5mm thick tinted/frosted/plain glass of approved colour and designincl frame for mosquito proofing, Mosquito proof jali:- Stainless steel jali 0.45mm nominal dia of wire and average width of aperture 1.40mm fixed type with appropriate size powder coated aluminium section on external faces of window. |
| 5 | S&F Aluminium powder coated fixed / openable type ventilators including suitable nylon beading channel gasket etc complete with following specification :- Frame :- 63.50mmx38.10mmx2.00mmPanel :- 4mm thick ACP sheet / 5mm thick tinted/frosted/plain glass of approved colour and designincl frame for mosquito proofing, Mosquito proof jali:- Stainless steel jali 0.45mm nominal dia of wire and average width of aperture 1.40mm fixed type with appropriate size powder coated aluminium section on external faces of window. |
| 6 | S&F Aluminium powder coated ventilators single panel with one opening outside where wire mesh is fixed and with louvers inside (4mm thick pin head glass with provn of deco grill) including suitable beading channel gasket, with necessary locking arrangement with handles etc complete with following specification:-Frame :- 92.36mmx29.70mmx1.50mmShutter stiles, top & bottom :- 39mmx20mmx1.5mmPanel :- 4.00mm thick pin head glass of selected quality n. exc 0.50Sqm each pane fixed to aluminum frame with beadind, rubber gasket. Mosquito proof jali:- Stainless steel jali 0.45mm nominal dia of wire and average width of aperture 1.40mm fixed type with approprriate size powder coated aluminum section on external faces of window.Rate is inclusive of all items. |
| 7 | S&F for power coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, weight 2.20 to 3.00 kg/sqm including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement. |
| 8 | Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 9 | Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge. |
| 10 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 11 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.Note: Stainless steel butt hinges and necessary S S screws shall be paid separately. |
| 12 | S/F 100 mm long SS butt hinges Gd 304 medium weight with necessary screws all as specified and directed. |
| 13 | S&F aluminium anodized barrel tower bolt 200mm long of extruded section complete all as specified and directed. |
| 14 | S&F aluminium anodized sliding door bolt 300mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed. |
| 15 | S&F aluminium handle cast type anodized 150mm long complete all as specified and directed. |
| 16 | Taking down cement plaster of any description on brick work or stone masonry walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge. |
| 17 | M&L 10mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L for rendering 8mm thick in CM 1:4 using liquid WPC over 12mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as directed. Note: Water proofing compound shall be paid separately. |
| 19 | M&L 5mm thick rendering in ceiling of cement mortar (1:3) on fair faces of brick work or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 20 | Supply only liquid water proofing compound complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two top coats of exterior anti fungal acrylic emulsion paint (Apex ultima protek (Asian paint)having FIVE years of performance warranty) over a coat of exterior water base coat (Apex ultima protek (Asian paint) required all as specified and prescribed by manufacture of point and as directed at site by Engineer-in-Charge.Note: (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint. The cost of materials (like base coat/topcoat of exterior paint), labour & T&P wherever required for preparation of surface are demand to be included in the rates quoted. (ii)The work must be got executed through authorised applicator of manufacture. Guarantee certificate should provide from the authorised applicator of manufacturer and shall be got approved from GE. (iii)After carrying out preparation of surface the same shall be got approved before application of exterior emulsion for each building.(iv) The cost of Scaffolding and safety measures wherever required are deemed to be included in the rates quoted by the contractor |
| 22 | M&L for two coats of oil bound distemper over a coat of 1.5mm thick wall care putty and one coat of alkali resistant primer to newly plastered surface including preparation of surfaces complete all as specified and directed by Engr-in-Charge. |
| 23 | M&L for three coats of white wash to newly plastered surfaces of ceiling including preparation of surfaces, complete all as specified and directed by Engr-in-Charge. |
| 24 | M&L for preparation of old ceiling surface and One coat of white wash on ceiling complete all as specified and directed by Engr-in-Charge. |
| 25 | M&L for preparation of new plastered surface finishes of external wall, preparation of surface and applying two coats of weather proof (antifungal, Asian Ultima Protek) paint over a coat of suitable primer over 1.5 thick wall care putty, complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction. |
| 26 | M&L for preparation and complete removal of existing treatment and applying two coats of Oil bound distemper over a coat of 1.5 mm thick wall care putty and one coat of alkali resistant primer complete all as specified and directed.Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction. |
| 27 | Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed. |
| 28 | M&L for precast cement concrete block masonry in type B1, 1:3:6 (20 mm graded stone aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 29 | Dismantling wall/floor tiling/ terrazo tile/ mosaic tiles/ pcc tiles incl. cement mortar bedding removing serviceable tiles and rubbish off the premises. |
| 30 | M&L Non – skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over cement screed 15 mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed by Engr -in-charge. |
| 31 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, set and jointed in neat cement slurry and pointed in white/coloured cement to match etc. set incl 5mm thick screed bed of cement mortar 1:3 as in skirtings floor finishes complete all as specified and directed by Engr -in-charge. |
| 32 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.38 sqm, in floors over cement screed 15 mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in epoxy joint filling minimum 5mm depth and 3mm thick spacer width complete all as specified and directed by Engr -in-charge. (Epoxy joint filling paid separately) |
| 33 | M& L for Glazed Ceramic tiles in vertical surface each tiles exceeding 0.18 sqm but not exceeding 1.00 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 on fair face of brick work or concrete surface set and jointed in neat cement slurry and pointed in epoxy joint filling minimum 5mm depth and 3mm thick spacer width complete all as specified and directed by Engr -in-charge. (Epoxy joint filling paid separately) |
| 34 | M & L for epoxy tile joint filling for item No 32,33 using approved manufacturer on floor and walls all complete as per the manufactures instructions. |
| 35 | S& F in repairs 20mm dia stainless steel curtain rod including SS decorative brackets with all fitting arrangement fixed to wall complete all as specified and directed. |
| 36 | S&F vitreous china WHB white with flat back of size 550x400mm with bracket including waste coupling and 32mm PVC waste pipe and 15mm bore Pillar taps,cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 37 | S&F in repair vitreous china oval counter top WHB size (560x410) round shape star white with bracket including waste coupling and 15mm bore Pillar taps,cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 38 | S&F in repair PVC valveless flushing cistern low level 8 to 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as specified and directed. |
| 39 | S&F in repair vitreous china wash down water closet pan pedestal pattern white including fixing with P trap including PVC matching seat cover complete all as specified and directed. |
| 40 | S&F looking mirror with cabinet of size 550X350x13cm of selected quality glass, mounted on fixed with hooks & screws complete all as specified and directed. |
| 41 | S&F in repair brass CP towel Rail 600mm long \\"D\\" type complete all as specified and directed. |
| 42 | S&F in repair vitreous china soap dish fixed to wall with screw complete all as specified and directed. |
| 43 | Demolition of cement concrete (unreinforced) above ground floors and paving exc. 15cm thickness (below or above ground level). |
| 44 | M & L for plain cement concrete Nominal mix (1:4:8) type D2(using 40 mm graded brick aggregate) as in sunken floor. |
| 45 | M & L 10mm thick rendering in CM ( 1 : 3 ) mixed with water proofing compound on fair faces of brick walls or concrete surfaces and finished even & fair complete all as specified.Note : water proofing compound paid separately |
| 46 | M&L 50mm thick PCC (1:2:4) type B1 (Using 20mm graded stone aggregate) for sub base of sunken portion complete all as specified |
| 47 | M&L 75mm thick PCC (1:3:6) type C-2 (Using 20mm graded crushed stone aggregate) as in plinth protection /hardstanding , laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 48 | M&L for water proofing for sunken slabs including all materials as per the stages described below, complete all as specified and as directed. (a) Remove all dust, oil, dirt, laitance and other containments, loose particles from concrete surface.(b) Chamfering the floor wall junctions with cement mortar 1:4 admixed with NitoBond SBr or equivalnt @ 1 litre per 50 Kg bag of cement. (c) Annular space of out let/spout pipes shall be packed and sealed using Conbextra GP2 or equivalent mixed water and filling as per manufacturers specifications.(d) Carrying out ponding for minimum of 48 hours (e) Injection grouting of all leaking spot and honey combs with cementious pressure grouting with 40psi pump using Cebex 100 or equivalent @225 gms mixed to 50 Kg bag of cement incl joints packing using polymer modified mortar. (f) Providing and applying water proof coating using fosroc Nitoproof 600 or equivalent, over dry surfaces to achieve 1.5mm thick with 02 coats with interval period of 6 hours over the surface using spray/ squngee/ roller/ brush. Water proofing coating shall have the elongation of 500-700% (ASTM D412-90), tear resistance of 21Kn/m (ATMD624-00) and tensile strength of >1.9 N/mm2. Termination to be done on wall extending the coating to min 300mm height above the finished floor level as per vendor recommendation. Laying 200gsm non-woven geo textile membrane over Nitoproof 600 coating with overlap sealed. |
| 49 | Taking down of 110/75/50 mm PVC drain pipes, jointed in cement mortar and taking out of wall/floor complete all as specified and as directed. |
| 50 | S&F110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F 75mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints,fixed to wall complete all as specified and directed by Engr-in-Charge. |
| 52 | S&F in repair 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F in repair 75mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge. |
| 54 | S&F in repair 40mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge. |
| 55 | S&F 50mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified. |
| 56 | S & F in repair 75mm Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified. |
| 57 | S & F in repair 100mm Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified. |
| 58 | S&F PVC (SWR) bend any radius 110mm bore complete all as specified and directed by Engr-in-Charge. |
| 59 | S&F PVC (SWR) bend any radius 75mm bore complete all as specified and directed by Engr-in-Charge. |
| 60 | S&F PVC (SWR) bends 110 mm dia with access door all as specified and directed by Engr-in-Charge. |
| 61 | S&F PVC (SWR) bends 75 mm dia with access door all as specified and directed by Engr-in-Charge. |
| 62 | S & F 110mm dia PVC (SWR) T single junction with access door all as specified and directed by Engr-in-Charge. |
| 63 | S & F 75 mm dia PVC (SWR) T single junction with access door all as specified and directed by Engr-in-Charge. |
| 64 | S & F 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal with access door all as specified and directed by Engr-in-Charge. |
| 65 | S & F 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal with access door all as specified and directed by Engr-in-Charge. |
| 66 | S&F in repair PVC floor Trap 75mm (SWR) floor trap, plain with grating including jointing with solvent or cement all as specified and directed by Engr-in-Charge. |
| 67 | S&F in repair 75mm PVC (SWR) multi floor trap with grating including jointing with solvent cement all as specified and as directed. |
| 68 | S&F Grating round 110 mm size of Stainless steel (with/without hole for waste pipe) complete all as specified. |
| 69 | Dismantling boarding any description fixed in any position with nails all as specified and as directed. |
| 70 | S&F 18/19mm marine plywood (710 grade) with both side laminated mica sheet glossy finished (not less than 1mm) water proof, termite & borer proof, corrosion free with melamine polished shutter for CB complete all as specified and as directed. |
| 71 | M & L 2nd Class hardwood Plain fillets. square, rectangular or triangular in section exc 13 sq cm not exc 25 Sq cm , clean sawn, secured with nails or brads complete all as specified. |
| 72 | S&F IInd class hardwood plain solid straight chowkhat and frame wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 73 | S&F MS work as in hold fast and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed. |
| 74 | S&F 100 mm long mild steel butt hinges medium weight complete all as specified and directed. |
| 75 | M&L for PCC (1:3:6) type C-1 (Using 20mm graded stone aggregate) as in cills, copings, bed blocks for hold fasts and the like complete all as specified and directed. |
| 76 | S& F in repair 20mm dia stainless steel curtain rod in wardrobe including SS decorative brackets with all fitting arrangement fixed to wall complete all as specified and directed. |
| 77 | S&F for 40mm dia cupboard knobs fixed with nut, screws and washer of wooden finish brass polished complete all as specified and directed. |
| 78 | S&F magnet catcher to wooden frame work complete all as specified and directed. |
| 79 | S&F 15-24mm sensus soft close crank hinges (Hettich) complete all as specified and directed. |
| 80 | S&F aluminium anodized barrel tower bolt 150mm long of extruded section complete all as specified and directed. |
| 81 | S&F aluminium handle cast type anodized 100mm long complete all as specified and directed. |
| 82 | M&L for Drilling holes at specified location to required depth and diameter as directed by Engr-in-charge and injecting the two component epoxy grout as point applicable upto avg 400gm per packers fixed as per manufacturer institution complete all as specified and as directed. |
| 83 | M&L for Micro concreting in RCC columns, beams or soffit of slab including chemicals, reinforcement, form work average thickness not exceeding 50MM as per the following stages:- (i) Remove the damaged concrete portions completely till the reinforcement is exposed from the member carefully with mechanical arrangements and hand chiseling and clean the dust particles. (If the dia of existing reinforcement has reduced by more than 1/3 of the original dia, additional reinforcement has to be provided and fixed in position incl necessary formwork as directed by Engineer In Charge. Additional reinforcement will be measured and paid separately) (ii) Clean the reinforcement and apply Nitrozinc primer manufactured by M/S Fosroc chemicals or equivalent (iii) Applying the bonding agent by using NITO BOND EP or equivalent (iv) Providing leak proof shuttering system for the jacket portion of the members and applying micro concrete with Rendroc RG manufactured by M/S Fosroc chemicals or equivalent (compressive strength of Micro concrete should be 50 N/mm2) |
| 84 | M&L micro concreting in RCC slab/beam with 02 coats of polymer mortar of avg thickness 25-25mm (each coat) over a coat of epoxy resin based bonding agent over two coat of zinc primer over a coat of epoxy bond agent including anti-carbonation all as per manufacture instructions. |
| 85 | S&F in repair Stainless steel sink (Gde 304) single bowl size 1m*0.45m*0.30m (made with 1mm thick SS sheet) including bracket and other fitting arrangements complete all as specified and directed. |
| 86 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 87 | M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge. |
| 88 | All as per item No 87 above for but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified and directed by Engr-in-Charge. |
| 89 | M&L for use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for fair finished surfaces (Horizontal or sloping) complete all as specified and directed by Engr-in-Charge. |
| 90 | M&L RCC (1:2:4) type B-1 (Using 20mm graded crushed stone aggregate) as in slabs, shelves supported on walls, beams and columns in floor or roof including balconies, canopies, deck slabs or in Chajja/facia projection and the like complete all as specified and directed by Engr-in-Charge. |
| 91 | Dismantling of stone slabs/tiles of any description or thickness laid and bedded in any mortar all as specified and as directed. |
| 92 | M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) stone slab as in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust to match with marble shade over and including cement screed bed 15mm thick in CM (1:6) complete all as specified and directed by Engr-in-Charge. |
| 93 | Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete. all as specified and as directed. |
| 94 | S&F looking mirror of selected quality glass 4.8mm thick fixed with CP Bracket complete all as specified and directed. |
| 95 | At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same all as specified and as directed. |
| 96 | INTERNAL WATER SUPPLYTaking down old GI/CPVC pipe of size 40 mm complete all as specified and as directed. |
| 97 | Taking down old GI/CPVC pipe of size 25 mm complete all as specified and as directed. |
| 98 | Taking down old GI/CPVC pipe of size 20 mm complete all as specified and as directed. |
| 99 | Supply and fix on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessary fittings, solvents of size 40 mm dia complete all as specified and as directed. |
| 100 | All as per item No 99 above but of size 25 mm dia complete all as specified and as directed. |
| 101 | All as per item No 99 above but of size 20 mm dia complete all as specified and as directed. |
| 102 | Taking down old bib cock long nose, pillar tap, angle valve, health faucet, angle cock etc complete all as specified and as directed. |
| 103 | S&F 15mm bore bib cock Chromium Plated fancy type cast copper alloy with Each crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. |
| 104 | S&F Chromium plated fancy type 15mm angle valve/stop valves, cast copper Each alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed as directed by Engr-in-Charge. |
| 105 | S&F in repairs health faucet (ABS body) mild steel chromium plated suitable for 15 Each mm dia pipe with 1.25 metre long flexible tube and ABS wall hook inlcluding making connections and fixed in position complete in all respect as specified. |
| 106 | Supply and fixing in repairs of 15mm size Swivel Overhead Shower (minimum weight 40 grams) of PTMT, any colour with shower arm (minimum weight 40 grams) 195mm long with bend of 45 degree with flange, fixing with CPVC Pipe, complete all as specified and as directed by the Engineer in Charge. Make: CERA Model No. F 7020104 or any other make from the approved list of manufactures. |
| 107 | S&F in repairs Chromium plated fancy type concealed type 15mm stop valves. Each cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed as directed by Engr-in-Charge. |
| 108 | Taking down old PVC connection complete all as specified and as directed. |
| 109 | S&F PVC connections 15mm size with PTMT nuts of length 300mm complete all Each as specified and as directed. |
| 110 | Dismantling old PVC water tanks of capacity exc 1000 ltr and n exc 2000 litres from its position complete all as specified and as directed. |
| 111 | S&F of rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position of capacity 1000 litres complete all as specified and as directed. |
| 112 | S&F of rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position of capacity 2000 litres complete all as specified and as directed. |
| 113 | Taking down old CPVC ball valve of size 25mm complete all as specified and directed. |
| 114 | S&F CPVC Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings complete all as specified and as directed. |
| 115 | S&F in repars Float valve synthetic (PVC) of size 25 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm- 210gms./ 25mm-455gms/ 40mm- 690 gms) high pressure with polythene ball of size 6\\" dia and flynut complete all as specified and as directed. |
| 116 | INTERNAL ELECTRIC SUPPLYTaking down carefully existing copper / aluminium point wiring for light / fan / bell/ Per socket 5/15 Amp points complete with fitting and fixtures such as switches, Point sockets, c/rose, holders and bracket fittings with battens / conduits / wires, T/L fittings and making good the disturbed surfaces of walls and roofs etc and to match with existing colour complete all as specified and directed. |
| 117 | M & L for point wiring with 1.5 Sqmm PVC insulated sheathed FRLSH Per multistranded single core copper conductor cable in PVC concealed conduit rigid Point non metalic (ISI marked) fixed concealed on wall/ roof except beam, column and RCC roof including chases cutting incl suitable size/ cap of sunken box for modular switch and socket and modular white cover plate, flush metal box etc incl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for One light/ Fan point controlled by one switch and making good disturbed surfaces of walls, floors etc complete all as specified and as directed. |
| 118 | All as per item No 2 above but for One 3 pin 5 Amp socket outlet point controlled Per Point all as specified and as directed. |
| 119 | S & F Switch modular type 6 amps, 1 module single pole one way duly ISI Each 410 by one switch on independent board. marked, complete all as specified and directed. |
| 120 | S&F Socket outlet modular type 6A - 2 in 1,without shutter, 2 module, duly ISI marked, complete all as specified and directed. |
| 121 | S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, PVC/polycarbonate, isolated Each 260 body, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed. |
| 122 | Supply and fixing in LED lights fitting 1x 20 W, 220V, AC decorative box type, min Each 100 lumen/ watt with driver, holder and high quality materials and design exttruded aluminium housing enhances safety, high quality PC diffuser reliable and robust housing structure including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 123 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 Each watt 220 V AC decorative type min 100 lumen/ watt with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as per specified and as directed. |
| 124 | Supply & fix surface mounted LED down lighter round 15W, min 120Lumen/Watt, Each suitable size complete all as specified and as directed. 240 Volt with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as per specified and directed. |
| 125 | S&F in replacement of LED building security light fitting 35 Watt 230 V AC outdoor Each type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 protection complete all as specified and as directed. |
| 126 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades to AGE E/M store complete all as specified and as directed. |
| 127 | Supply and fix exhaust fan, steel body AC single Phase 230V of size 300 mm Each sweep with, blades, and frame and louvers complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender