Tender For Repair/Replacement Of Tiling, False Ceiling, Wall Panelling And B/R And E/M Allied Work At Mrc Under Age B/R-I Of Ge Saugor
Tender Value
30 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
11 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Tiling, False Ceiling, Wall Panelling And B/R And E/M Allied Work At Mrc Under Age B/R-I Of Ge Saugor
BOQ
| Sl. No. | Item Description |
| 1 | Taking down wooden/PVC wall panelling and similar work all as specified and directed. |
| 2 | S&F 25mm thick lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick, PVC Insulated Panel with wood grain printed PVC sheet duly fitted into the wall complete all assessories as per specifications and drawing all as specified and directed by Engr-in-Charge |
| 3 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specifed and directed. |
| 4 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets & frames (if any) in ceilings (measured flat & not girthed) |
| 5 | S&F 10mm thick PVC insulation panels with EPS stuck to 1mm thick printed PVC sheet suitably placed in false ceiling including snap grid made of Aluminium/G.I./M.S. all complete as per specification and drawing |
| 6 | M&L for multi layer 10mm thick (gypsum cord board) ceiling up to a height of 5.00 m above floor level and false ceiling of any shape (Square/Circular/Semi circular etc) of design and pattern approved by Engr-in-Charge, at site incl required snap grid & GI frame work and Fibre mesh/ reinforcement (Horizontal & Vertical) with Putty/POP work for even and smooth finishing surface, painting two or more coat with Premium quality plastic emulsion paint over one coat primer over smooth finish POP surface incl required provn for spot lighting/ ceiling light incl all required fixture/ material complete in all respect as specified and directed by Engr-in-Charge. |
| 7 | S&F in repairs 40 mm wide neoprene/EPDM gasket/door seal complete. |
| 8 | S&F in repair 12 mm thick toughened glass doors and with set of new SS hydraulic floor spring & top pivot suitable cutting to shape, drilling holes required incl figured/ frosted glass film of approved pattern/ logo/ shape on one side, SS Handle 600mm Long of approved design and shape, locking arrangement and all other fixing assessories. Complete all as specified and directed.Note:- Hydraulic door spring shall be suitable for operating door having weight 120 to 150 Kg. |
| 9 | Dismantling of wrought iron or mild steel work of any description not otherwise complete all as specified and directed. |
| 10 | S&F mild steel rolled/hollow tube section as in post, main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe-290 (Gde E-165) complete all as specified and directed. |
| 11 | S&F GI based pre-painted galvalume sheet, 0.50 mm thick coloured having aluminum zinc coating 150 gsm/ sqm and tensile strength 550 Mpa, double ribbed trapezoidal profile steel sheet as in roof covering /cladding to wall fixed with self tapping screws complete, including dismantling existing sheet of any description complete all as specified and directed. |
| 12 | S&F 0.50mm thick galvalume Aluminum Zinc coating GI based corrugated steel sheet for ridge having tensile strength of 550 Mpa and AZ150 fixing for closing gable truss suitable for profile pattern sheet fixed with J-Hook and double washer at top and bottom of J-Hook and apply silicone sealant around the screw hole and screw head , esuring it fills the entire gap. including dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets roofing complete all as specified and directed. |
| 13 | Demolition of cement concrete in unreinforced in ground floor and paving’s n'exc 15cm thickness (below or above ground level), any description complete all as specified and directed |
| 14 | M&L for 25mm thick PCC (1:2:4) type B-0 using12.50mm graged stone aggregate as in floors finished rough to receive the tiles complete all as specified & directed. |
| 15 | M&L for 75mm thick PCC 1:4:8, type D2(using 40mm graded stone aggregate) as in foundations/ mass concrete filling etc complete all as specified and directed. |
| 16 | M&L for 60mm thick factory made chamfered edge cement concrete colour paver block of M-35 grade, as in footpath, parks, lawns, drive ways or light traffic parking etc, chemically treated, laid in approved colour, design/ pattern, size and shape over and including 50mm thick uniformly leveled surface of stone dust cushioning, filling the joints with sand, finishing and sweeping extra sand complete including dismantling of old unserviceable existing provision complete all as specified and directed.Make : Mehtab tiles Indore(Mehtab)/ Nitco(NITCO)/ M/s Supreme Tiles |
| 17 | M&L for 50mm thick sand cushining over laid on paver block interlocking complete all as specified and as directed |
| 18 | M&L for non skid, joint free, coloured ceramic tiles, 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 19 | M&L for vitrified, joint free, colored ceramic tiles, 10mm thick (Square or rectangular), size 1200x600mmx8mm to 10mm thick on walls etc set over and including 15 mm thick cement plaster (1:6) CM set and jointed with costra tile adhesive silver type 1T(EN-STDC1TE) and pointed in white or colored cement to match with the color of tiles complete all as specified and directed. |
| 20 | M&L for vitrified, joint free, colored ceramic tiles, 10mm thick (Square or rectangular), area of each tile exc 0.38 sqm but not exceeding 0.42 sqm, in floors etc set over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or colored cement to match with the color of tiles complete all as specified and directed. |
| 21 | Ditto as per item No 20 herein before but on vertical surfaces over and including 10 mm thick plaster in CM 1:4 complete all as specified and as directed. |
| 22 | S&F 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl fittings and the holes in walls and floors shall be made by drilling with drill or jumper and not by dismantling the brick/concrete. After fixing holes shall be made good with CM 1:3 properly including taking down 15 mm dia GI tubing and connections complete all as specified and directed complete all as specified. Note : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 23 | Taking up or down steel tubing & connections incl cleaning for re-fixing or removal from site for 20 mm dia bore complete all as specified & directed. |
| 24 | Re-fixing only galvanised mild steel tubing 20 mm dia and connection in new or old position (wall,ceiling,floor etc) complete all as specified & directed. Note:-Serviceable GI tubing obtained from Srl item No. 23 above shall be re-used in this item. |
| 25 | S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 26 | S&F Vitreous china Table Top Basin, Size: 425x340x175 mm, white, Including with Waste coupling 32mm Size Half Thread with 130mm Height ,waste pipe, pvc connections and Single Lever Tall Boy with 190mm Extension Body Fixed Spout without Popup Waste System with 600mm Long Braided Hoses with required accessories complete all as specified and directed.Note : Pillar tap and PVC connection will be measured paid separately.Make : Jaquar (Cat Part No CNS-WHT-903-Basin), Cat Part No ALD CHR -709L130-waste), (Cat Part No FUP-CHR-29005BPM-mixer) |
| 27 | S&F Vitreous china Rimless Single Piece WC with PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fittings, Fixing Accessories and Accessories Set, Size: 370x665x750 mm, p or S Trap including dismantling/taking down existing WC of any description, complete all as specified and directed.Make : Jaquar (Cat Part No CNS-WHT-853P180SPPSM/CNS-WHT-853S220SPPSM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 28 | S&F Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer), chromium plated with required accessories complete in all respect including taking down existing Hand Shower of any description, as specified and directed.Make Jaquar (Cat Part No ALD-CHR-577) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 29 | S&F in repair chromium plated exposed part Kit of concealed stop cock & flush cock with fitting sleeve, operating lever & adjustable wall flange with seal including regular body of concealed stop cock cold only suitable for 15mm pipeline with protection cap with required accessories complete in all respect as specified and directed.Make : Jaquar (Cat Part No for exposed part-FUS-CHR-29083K and concealed Part:-ALD-083R,ALD-083L/ALD-089R/ALD-089L/ALD-081) or equivalent in kohler/Hans Grohe/Villeroy and boch. |
| 30 | S&F 15mm dia bib tap fancy type chromium plated,cast copper alloy, with wall flange, srewed for iron pipe including taking down exsiting bib tap of any discriptioncomplete all as specified and directed.Make : Jeguar ( Cat Part No ARI-CHR-39037) /Cera(Cat part No F1005151)/ Johnson (Cat part No T3205C) |
| 31 | S&F in repair 15mm bore 2 Way Bib Cock with Wall Flange chromium plated including taking down existing tap of any description, complete all as specified and directed.Make : Jaquar-(Cat Part No FUP-CHR-29041PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 32 | S&F Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) screwed down for 15mm bore iron pipe including taking down existing mixer /taps of any description complete all as specified and directed.Make : Jaquar ( Cat Part No FUP-CHR-29281PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 33 | S&F Single Lever Basin Mixer without Popup Waste System with 450mm Long Braided Hoses, chromium plated with required accessories including taking down existing tap/mixer of any description, complete in all respect as specified and directedMake Jaquar (Cat Part No FUP-CHR-29011BPM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 34 | S&F Angular Stop Cock with Wall Flange, chromium plated with required accessories including taking down existing tap of any description, complete in all respect as specified and directed. Make : Jaquar (Cat Part No FUP-CHR-29053PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 35 | S&F Vitreous china vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe complete fixed including dismantling/taking down existing WC of any description, complete all as specified and directed.Make : Jaquar (Cat Part No ECS-WHT-451 or equivalent Hindware/ johans/ parryware |
| 36 | S&F Overhead Shower 120X120mm Square Shape Single Flow (Face Plate Stainless Steel & ABS Body) with Rubit Cleaning System and Shower Arm Casted 160mm Long Light Body Round Shape for Wall Mounted Showers with Flange , chromium plated, fixed to pipe including taking down existing shower rose and arm of any description complete all as specified and directed.Make : Jaguar ( Cat Part No.: Shower : OHS-1667 , Arm : SHA-477) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 37 | Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and removing of rubbish off the premises complete all as specified and directed. |
| 38 | Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed. |
| 39 | Taking down carefully copper/aluminum point wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed. |
| 40 | M&L for surface point wiring for one light point or fan/exhaust point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor (stranded) 1100 volt wiring cable in & including ISI marked PVC conduit case-n-caping of size not less than 20mm, ivory/white in colour with all accessories (such as tee, bend, joint cover etc) including suitable size metel shunken boxes made of MS sheet (thickness not less than 1.6mm) with earth dolly and hylam / pvc laminated sheet (thickness not less than 3.0mm) for mounting of switches/sockets/ regulator etc and continuous earth lead cable wire of similar description of wiring cable complete all as specified and directed.Note:-(i) Wiring cable shall be provided using colour coding such as Phase - Red, Neutral – Black, and Earth – Green or as approved by Engr-in-charge .(ii) Cutting, chasing in walls (brick or stone) shall be measured and paid separately under respective item here-in-before. |
| 41 | All as per item No 40 above here in before but For one Call Bell point controlled by one push button switch all as directed by Engr-in-charge |
| 42 | All as per item No 40 above here in before but For 5Amp independent socket point controlled by one switch all as directed by Engr-in-charge |
| 43 | All as per item No 40 above here in before but For one 3 pin ,5 Amp socket point with other switch on the same board all as directed by Engr-in-charge |
| 44 | All as per item No 40 above here in before but for power point wiring using with 2.5 sqmm PVC FRLSH insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as complete all as directed by Engr-in-charge . |
| 45 | M&L for concealed point wiring with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl conduit of size not less than 20mm ISI marked, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead For one light point or fan point controlled by one switch complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green all as specified and directed by Engr-in-charge all as directed by Engr-in-charg .(ii) Cutting, chasing in walls (brick or stone) shall be measured and paid separately under respective item here-in-before. |
| 46 | All as per item No 45 above here in before but For one Call Bell point controlled by one push button switch all as directed by Engr-in-charge |
| 47 | All as per item No 45 above here in before but For 5Amp independent socket point controlled by one switch all as directed by Engr-in-charge |
| 48 | All as per item No 45 above here in before but For one 3 pin ,5 Amp socket point with other switch on the same board all as directed by Engr-in-charge |
| 49 | All as per item No 45 above here in before but for power point wiring using with 2.5 sqmm PVC FRLSH insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as con all as directed by Engr-in-charge . |
| 50 | S&F Modular switch, one way, 5/6 Amp 230, 1 module complete all as specified and directed. |
| 51 | S&F Modular socket outlet, 5/6 Amp-2/3 pin combined, 2 module complete all as specified and directed. |
| 52 | S&F switch Modular, single pole, one way,15/16 Amp ,1 module 230 Volt complete all as specified and directed. |
| 53 | S&F socket outlet modular 15/16 Amp, 5/6 pin combined ,2 module 230 Volt complete all as specified and directed. |
| 54 | S&F modular fan step regulator 60/80W, 2 modules complete all as specified and directed. |
| 55 | S&F modular bell push, 6Amp, 1 module complete all as specified and directed. |
| 56 | S&F switch piano type flush, single pole, one way 5 A 230 V. complete all as specified and directed. |
| 57 | S&F socket outlet, 5 pin, 5 Amp, flush type, 230 V. complete all as specified and directed. |
| 58 | S&F switch piano type flush, single pole, one way 15 A 230 V . complete all as specified and directed. |
| 59 | S&F socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V. complete all as specified and directed. |
| 60 | S&F ceiling rose, surface backlite,three terminal complete all as specified and directed. |
| 61 | S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed. |
| 62 | S&F in repair / replacment call bell ding dong 230 Volt, Single Phase, complete all as specified and directed.Make Anchor/L&T/Havells Reo |
| 63 | S&F modular fan step regulator 60/80W, 2 modules complete all as specified and directed. |
| 64 | S&F modular bell push, 6Amp, 1 module complete all as specified and directed. |
| 65 | M&L concealed sub main wiring with two single core 6.0 Sqmm PVC FRLSH insulated unsheathed stranded copper cable (Phase & nutral) and one single core cable of same description as continuous earth wire, drawn in & incl medium grade, ISI marked PVC conduit of suitable size (not less than 20mm dia) with all accessories (such as tee, bend, joint cover, round / square blocks at junctions as required) including taking down of existing submain wiring of any discription complete all as specified and directed.Note: (i) The cost of cutting charging pinning for concealed PVC conduit, making good in CM 1:3 and painting so as to match with the adjoining existing surface finish shall be measured and paid separately under respective item of BOQ in this contract)(ii) Proper colour coding of wiring cables (as approved by Engg-in-charge) shall be used/ ensured(iii) Two runs of single core cable (Phase and neutral) and and one run of single core cable (earth continuity conductor) & one run of PVC casing -n-capping/pvc conduit shall be measured as one unit length. |
| 66 | S&F testing and commissioning of MCB SP 240 volt 6 Amp to 32 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 67 | S&F testing and commissioning of S&F MCB SPN 240 volt 40 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 68 | S&F sheet metal enclosure distribution board (DB) double door, IP-43, SPN, 8 way, 240 V with 120-160 Amps rated bus bar of suitable size, including taking down existing DB with MCB and bus bars complete all as specified and as directed.Note: (i) The cost of cutting charging pinning for concealed PVC conduit, making good in CM 1:3 and painting so as to match with the adjoining existing surface finish shall be measured and paid separately under respective item of BOQ in this contract) |
| 69 | S&F LED Bulk head 13/10 watt designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer.All as specified and directed by Engr-in-Charge |
| 70 | S&F only Tube light fitting 20/18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directedMake : Havells - Cat no LHEXAPP7PN1W020/ or equivalent in Bajaj / Philips / Orient |
| 71 | \\"S&F box type LED optic fitting 10/9 Watt 2 feet box type complete all as specified and directed.Make : Havells - Cat Part No LHEXBLP7IN1W009 or eqvt in bajaj / crompton greaves\\" Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender