Tender For Thorough Interior Civil Renovation & Allied Works Of Administrative Building Of Teesta Canal Fall Hydel Project At Phansidewa, Dist: Darjeeling.
Tender Value
68.49 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
11 days left
EMD
1.37 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darjeeling → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Thorough Interior Civil Renovation & Allied Works Of Administrative Building Of Teesta Canal Fall Hydel Project At Phansidewa, Dist: Darjeeling.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. in Ground floor. |
| 2 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.In 1st floor. |
| 3 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.In 2nd floor. |
| 4 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. in Ground floor. (b) above 150 mm. thick |
| 5 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. in 1st floor. (b) above 150 mm. thick |
| 6 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.In 2nd floor. (b) above 150 mm. thick. |
| 7 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars Ground Floor. |
| 8 | In 1st Floor. |
| 9 | in 2nd Floor. |
| 10 | Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. In Ground floor. |
| 11 | Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m.In 1st Floor. |
| 12 | Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m.In 2nd floor. |
| 13 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 14 | Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint. |
| 15 | Removing old paint from blistered painted surface of steel or other metal by chipping including scraping and cleaning and exposing the original surface. |
| 16 | Taking out Mirzapur or glazed porcelain tiles carefully by chiselling from walls or floor including stacking serviceable material as directed. |
| 17 | Polishing only of old marble or terrazo work with oxalic acid powder using 33 gms/ sq.m. by manual labour / machine where necessary. |
| 18 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately) (a) Upto area 2.5 Sq.m |
| 19 | Dismantling Orissa pattern W.C. including taking out of base concrete, if necessary, complete. |
| 20 | Dismantling E.P. or Anglo-Indian W.C. |
| 21 | Dismantling urinal. |
| 22 | Dismantling wash basin with brackets with or without waste fittings. |
| 23 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. |
| 24 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. |
| 25 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 26 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4)In 1st floor. |
| 27 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4)In 2nd floor. |
| 28 | Brick work with 1st class bricks in cement mortar (1:4) in superstructure Ground floor. |
| 29 | In 1st floor. |
| 30 | Brick work with 1st class bricks in cement mortar (1:4) in superstructure In 2nd floor. |
| 31 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground Floor).[Excluding cost of chipping over concrete surface] ii) With 1:4 cement mortar (b) 15 mm thick plaster |
| 32 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (In 1st Floor Floor).[Excluding cost of chipping over concrete surface] ii) With 1:4 cement mortar (b) 15 mm thick plaster In 1st Floor |
| 33 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (In 2nd Floor Floor).[Excluding cost of chipping over concrete surface] ii) With 1:4 cement mortar (b) 15 mm thick plaster In 2nd floor |
| 34 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary .[Excluding cost of chipping over concrete surface] ii) With 1:4 cement mortarii) With 1:4 cement mortar(c) 10 mm thick plaster Ground Floor. |
| 35 | In 1st Floor. |
| 36 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary .[Excluding cost of chipping over concrete surface] ii) With 1:4 cement mortarii) With 1:4 cement mortar(c) 10 mm thick plaster In 2nd floor. |
| 37 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, as per relevant IS codes (b) River bazree In Ground Floor |
| 38 | In 1st Floor |
| 39 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, as per relevant IS codes (b) River bazree In 2nd floor |
| 40 | Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety (a) 1:3:6 proportion (outside) Ground Floor |
| 41 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in Ground floor as per relevant IS codes. (ii ) River Bazree |
| 42 | In 1st floor. |
| 43 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in 2nd floor as per relevant IS codes. (ii ) River Bazree |
| 44 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 45 | Repairing crack in wall by cement grouting (1 : 2) including widening the crack on the surface (into V section) cleaning and packing the same with cement mortar (1 : 2) and finishing off to match with adjacent surface. (Cement-69 KG/100 m) |
| 46 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel I) SAIL/TATA/RINL Ground Floor. |
| 47 | In 1st Floor. |
| 48 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel I) SAIL/TATA/RINL In 2nd floor. |
| 49 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (in Ground floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge |
| 50 | in 1st floor. |
| 51 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (in 2nd floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge |
| 52 | Labour for Chipping of concrete surface before taking up Plastering work. |
| 53 | Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer's specified time as per manufacturers specification. (0.4 KG / m² of concrete surface). |
| 54 | Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer's specified rate) for concrete of various grades |
| 55 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. in (a) One Coats i) Water based interior grade Acrylic Primer |
| 56 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) ) Luxary quality |
| 57 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) |
| 58 | In 1st Floor |
| 59 | In 2nd Floor |
| 60 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc |
| 61 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 62 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (a) On timber or plastered surface : With other than hi-gloss of approved quality (ii) Two coats (with any shade except white) |
| 63 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) On steel or other metal surface : With other than hi-gloss of approved quality (ii) Two coats (white in shade) |
| 64 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of EACH tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall Ground floor With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 KG/Sq.m & joint filling using white cement slurry @ 0.20KG/Sq.m. (b) Area of EACH tile above 0.09 Sq.m (i) Coloured decorative |
| 65 | In Wall 1st floor. |
| 66 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of EACH tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall 2nd floor With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 KG/Sq.m & joint filling using white cement slurry @ 0.20KG/Sq.m. (b) Area of EACH tile above 0.09 Sq.m (i) Coloured decorative |
| 67 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91KG./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 KG of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) I (II) With Polymerised Adhesive [6 mm thick] & epoxy grouting materials for filling joints including spacer-2 mm [Applied directly over finished artificial stone floor/ mosaic etc.] light colour |
| 68 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91KG./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 KG of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) I (I) With application slurry @1.75 KG/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 KG/ Sq.m white cement for joint filling with pigment. (B) Light Colour |
| 69 | Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 KG./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 KG of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (Whitecement, synthetic adhesive and grout material to be supplied by the contractor). Ground Floor Sizes-600 mm x600mm x10 |
| 70 | 1st Floor |
| 71 | 2nd Floor |
| 72 | Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. Area of EACH Granite slab >0.6 upto 1.0 square metre. [Using cement slurry at back side of granite @ 4.4 KG/sq.m & white cement slurry for joint filling @ 1.8 KG/sq.m] |
| 73 | Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Marble Stone |
| 74 | Extra cost of labour for Marble Stone Floor in treads of Steps. |
| 75 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (ii) 550 mm X 400 mm size |
| 76 | Supplying, fitting and fixing pedestal of approved make for wash basin (white) |
| 77 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (a) With 'P' trap |
| 78 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). (i) 580 mm X 440 mm |
| 79 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 80 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (i) 635 mm X 395 mm X 420 mm |
| 81 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i) 450 mm X 350 mm |
| 82 | Supplying fitting and fixing Multi Floor Trap with Top tile & Strainer 75 mm |
| 83 | Supplying, fitting and fixing bib cock or stop cock (b) (ii) Chromium plated Bib Cock with wall flange (Equivalent to Code No. 5047 & Model - Florentine of Jaquar or similar brand). |
| 84 | Supplying, fitting and fixing bib cock or stop cock(b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similarbrand). |
| 85 | Supplying, fitting and fixing pillar cock of approved make. .e) (i) CP Centre hole Basin mixture with regular spout without popupwaste system with 450 mm long braided hoses. (Equivalent to Code No.5167(B) & Model - FLORENTINE of JAQUAR or similar brand). |
| 86 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (ii) 750 mm long |
| 87 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (ii) 450 mm long |
| 88 | Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). |
| 89 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work 20 mm dia. PVC pipes |
| 90 | 40 mm dia. PVC pipes for Exposed Work |
| 91 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) 25 mm dia. PVC pipes for Exposed Work |
| 92 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work 50 mm dia. PVC pipes |
| 93 | 25 mm dia. PVC pies for Concealed Work |
| 94 | Supplying, fitting and fixing urinal flush pipe fittings of approved brand.(a) C.P. urinal flush pipe fittings range of one |
| 95 | Supplying, fitting and fixing dome shaped C.P. waste grating for urinals.(i) 32 mm |
| 96 | Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass ii) 25 mm dia. and 600 mm long |
| 97 | Supplying, fitting and fixing glass shelf with aluminium guard rails. a) Ordinary type with 5.5 mm sheet glass (ii) 600 mm X 125 mm |
| 98 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm |
| 99 | Supplying, fitting and fixing liquid soap container.(c) Fibre glass |
| 100 | Supplying, fitting and fixing soap holder. (b) Fibre glass |
| 101 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length (b) 110 mm |
| 102 | (ii) Plain Tee (b) 110 mm |
| 103 | (ii) Plain Tee (a) 75 mm |
| 104 | (iii) Door Tee(b) 110 mm |
| 105 | (iii) Door Tee (a) 75 mm |
| 106 | Plain Y (b) 110 mm |
| 107 | Plain Y (a) 75 mm |
| 108 | Bend 87.5º (b) 110 mm |
| 109 | Bend 87.5º (a) 75 mm |
| 110 | Door Bend (T.S.) (b) 110 mm |
| 111 | Door Bend (T.S.) (a) 75 mm |
| 112 | Vent Cowl (b) 110 mm |
| 113 | Pipe Clip (b) 110 mm |
| 114 | Pipe Clip (a) 75 mm |
| 115 | 110 X 110 P Trap 75 mm |
| 116 | Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for EACH vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer‟s specification and direction of Engineer-in-Charge. |
| 117 | PVC Door Shutter-30 mm thick: Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm) wall thickness.Horizontal & vertical section shall be fixed to EACH other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular 'L' shaped bracket 100mm x 200mm in EACH corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliancesi/c carriage of all materials taxes and all other incidental charges complete. |
| 118 | Supply of Plumbing Mistry |
| 119 | Supply of Plumbing Helper |
| 120 | Supply of Mazdoor |
| 121 | Supply of Carpenter (Head) |
| 122 | Supply of Carpenter (helper) |
| 123 | Supply of Methor (Mistry) |
| 124 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheet and galvanised with zinc coating of 150 gm/ sqm (both side inclusive) as per IS:277 and consisting of angle clips of size 25mm wide 1.6mm thick with flanges of 27mm and 37mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastner 12.5 mm dia into 50 mm long with 6mm dia. bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I channels 45x15x0.9 mm running at the spacing of 1200mm centre to centre to which the ceiling section 0.5 mm thick bottom edge weights of 80 mm width tappered flanges of 26 mm EACH having lips of 10.5 mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia into 230 mm long G.I wire at every junction, including fixing perimeter channels 0.5 mm thick 27mm high having flanges of 20mm and 30 mm long, perimeter of ceiling fixed to wall/partition with tha help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @230 mm interval, including fixing of Gypsum board to ceiling section and perimeter chanel with the help of dry wall screws of size 3.5x25 mm at 230mm c/c, including jointing and finishing to a flush finish of tappered and square edge of board with recommended jointing compound, jointing tapes, finishing with jointing compound in a three layer covering up to 150 mm on both sides of joint and two coats of primer suitable for bolts, all as per manufacturers specification and also the cost of making opening for light fittings, grills, difusers, cutouts made with frame of perimeter chanels suitabily fixed, all complete as per drawings, specification and direction of Engineer in-charge but excluding the cost of painting with:(ISI mark on Board) Ground Floor |
| 125 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheet and galvanised with zinc coating of 150 gm/ sqm (both side inclusive) as per IS:277 and consisting of angle clips of size 25mm wide 1.6mm thick with flanges of 27mm and 37mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastner 12.5 mm dia into 50 mm long with 6mm dia. bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I channels 45x15x0.9 mm running at the spacing of 1200mm centre to centre to which the ceiling section 0.5 mm thick bottom edge weights of 80 mm width tappered flanges of 26 mm EACH having lips of 10.5 mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia into 230 mm long G.I wire at every junction, including fixing perimeter channels 0.5 mm thick 27mm high having flanges of 20mm and 30 mm long, perimeter of ceiling fixed to wall/partition with tha help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @230 mm interval, including fixing of Gypsum board to ceiling section and perimeter chanel with the help of dry wall screws of size 3.5x25 mm at 230mm c/c, including jointing and finishing to a flush finish of tappered and square edge of board with recommended jointing compound, jointing tapes, finishing with jointing compound in a three layer covering up to 150 mm on both sides of joint and two coats of primer suitable for bolts, all as per manufacturers specification and also the cost of making opening for light fittings, grills, difusers, cutouts made with frame of perimeter chanels suitabily fixed, all complete as per drawings, specification and direction of Engineer in-charge but excluding the cost of painting with:(ISI mark on Board) In 1st floor |
| 126 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheet and galvanised with zinc coating of 150 gm/ sqm (both side inclusive) as per IS:277 and consisting of angle clips of size 25mm wide 1.6mm thick with flanges of 27mm and 37mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastner 12.5 mm dia into 50 mm long with 6mm dia. bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I channels 45x15x0.9 mm running at the spacing of 1200mm centre to centre to which the ceiling section 0.5 mm thick bottom edge weights of 80 mm width tappered flanges of 26 mm EACH having lips of 10.5 mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia into 230 mm long G.I wire at every junction, including fixing perimeter channels 0.5 mm thick 27mm high having flanges of 20mm and 30 mm long, perimeter of ceiling fixed to wall/partition with tha help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @230 mm interval, including fixing of Gypsum board to ceiling section and perimeter chanel with the help of dry wall screws of size 3.5x25 mm at 230mm c/c, including jointing and finishing to a flush finish of tappered and square edge of board with recommended jointing compound, jointing tapes, finishing with jointing compound in a three layer covering up to 150 mm on both sides of joint and two coats of primer suitable for bolts, all as per manufacturers specification and also the cost of making opening for light fittings, grills, difusers, cutouts made with frame of perimeter chanels suitabily fixed, all complete as per drawings, specification and direction of Engineer in-charge but excluding the cost of painting with:(ISI mark on Board) In 2nd floor |
| 127 | P.V.C- False Ceiling :Providing False Ceiling made with framework of steel tube of 40mm x 20mm ofnot less than 18 gauge,the long and cross section will be welded with EACH other 1000mm to 1200mm apart the entire framework will be fixed in wall using rawlplug or gutties or screws etc. and suspended from ceiling with M.S flat 19mmx3mm as necessary,the entire frame will be painted with red oxide. PRINTED LAMINATED P.V.C Section 150mm x 12mmx 1.00mm (+/- 0.01mm)of approved quality and colour will be fixed on the frame so that the entire framework will not be visible from below P.V.C Section will be fixed with the frame with the help of self tapping steel screws including all materials and labour charges including fitting,fixing the same and hoisting including mending the damages in all respect and cost of paint as required as per direction of Engineerin-Charge . In ground floor. |
| 128 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (c) Sal : Siliguri. G.Floor |
| 129 | 1st Floor |
| 130 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (c) Sal : Siliguri. 2nd Floor |
| 131 | Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping] (ii) 12mm In Ground Floor |
| 132 | In 1st Floor. |
| 133 | In 2nd Floor. |
| 134 | Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer - in - Charge of requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS: 848 - 1974 excluding the cost of supporting frame work and teak wood battens / lipping) (b) Interior Grade 12mm thick Ground Floor |
| 135 | Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer - in - Charge of requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS: 848 - 1974 excluding the cost of supporting frame work and teak wood battens / lipping) (b) Interior Grade 12mm thick 1st Floor |
| 136 | Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer - in - Charge of requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS: 848 - 1974 excluding the cost of supporting frame work and teak wood battens / lipping) (b) Interior Grade 12mm thick 2nd Floor |
| 137 | Supplying profiles of required section made of Aluminium alloy extrusions conforming to IS:732-1983 and IS:1285-1975, anodized (with required film thickness and specified colour/ natural) matt finished conforming to IS:1868-1983 for fabrication of composite door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed/ certified make and brand as per direction ofE-in-Charge. In 10-12 micron thickness annodizing film. Natural white. a) Fixed partitions (unsupported length of vertical member upto 1.50mtr height of both ends of vertical member restrained but panels within 0.9sqm)i) Top, bottom & side member |
| 138 | ii) Intermediate member |
| 139 | iii) Glazing clip |
| 140 | b) Movable door shutter.ii) Shutter (a)Top rail |
| 141 | (b) Bottom rail |
| 142 | (c) Lock Rail |
| 143 | (d) Door vertical |
| 144 | Labour charge for fabrication & installation of composite door, window, partitions made from annodlized extruded alloy aluminium sections for the following units :-a) Partly glazed and partly panelled partition or fixed glazing made of extruded and anodized alloy aluminum sections fabrications after cutting to proper shape and size, drilling and allining, fitted with inbuilt locking arrangements cutting glass/ board (prelaminated/ particle block) to requisite shape and size moulding the edges fitted and fixed glazing clip and dry set neoprine/ EPDM gasket alongwith alongwith all other necessary arrangements for fixing the partition to walls, floor, beams, columns polysulphide sealant for water proofing if necessary complete in all respect as per drawing, specification and direction of E-I-Charge. (The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, fastener but excluding the cost of extruded aluminium sections, EPDM gasket, glass, board,glazing clips, lockng arrangements etc.) For partion using section of size 63.50mmx38.10mm. |
| 145 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: 75mm x 45mm x 2.50mm |
| 146 | Supplying 125mm dia acrylic handle for aluminum door as per approved make & brand.: Natural Colour. |
| 147 | Supplying EPDM gasket of approved make and brand as per direction of Engineer-in charge.(i) 'U' shapeppd EPDM gasket for frames. |
| 148 | (ii) weather gasket / wool pile for door vertical. |
| 149 | Anodised aluminium barrel/tower/socket bolt(full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws. 150mm long x 10mm dia. Bolt. |
| 150 | Supplying bubble free float glass of approved make and brand conforming to IS 2835-1987.i) 5mm thick clear glass. |
| 151 | Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide EACH and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor: (a) 35mm thick shutters (single leaf) |
| 152 | In 1st floor. |
| 153 | Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide EACH and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in 2nd floor: (a) 35mm thick shutters (single leaf) |
| 154 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987; (A) clear, toughened glass conforming to IS: 2553-1992 (part-II) (B) coloured, toughened glass conforming to IS: 2553-1992 (part-II) iii) 10mm thick |
| 155 | Supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN -1154, of approved quality of reputed brand as per direction of Eingineer-in-Charge fitted and fixed complete including all incidental charges. |
| 156 | Supplying Heavy Duty Aluminium Handle (EBCO Type) (Natural White) |
| 157 | b) Supplying, fitting fixing Godrej type hydraulic (oil check) floor door spring,heavy duty double action with brass shoe, brass top centre aluminium top cover etc. complete set as per direction of Engineer-in-charge. |
| 158 | Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete. (ii) Godrej Hydraulic door closer fitted and fixed complete (b) Medium type |
| 159 | Steel body foot-door holder. |
| 160 | Anodised aluminium grip handle with base plate of approved quality fitted and fixed complete. (a) With base plate. (i) 165mm grip x 12mm dia rod x 42mm plate x 3.2mm thick. |
| 161 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. (i) 250mm x 16mm dia bolt. |
| 162 | Brass hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (b) 250mm long |
| 163 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: (v) 100 x 63 x 3.2mm. |
| 164 | (b) Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete. |
| 165 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (b) 40mm X 6mm, 200mm Length |
| 166 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 KG./sq.mtr and up to 16 KG./sq. mtr. |
| 167 | Supplying Weather Silicone sealant of approved make and brand for fixing of grove line between the Glasses as per direction of Engineer-in charge. for Structural Glazing/Curtain wall. Weather Silicone sealant for filling the Grove line between Glasses or any other material for facial work |
| 168 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. I) For structural members of specified sections weighing less than 22.5 KG./m |
| 169 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete (In Ground Floor) |
| 170 | Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-in charge. (This item should be executed only after prior approval of the Engineer-in charge).Firstly,one number to be paid and then labour rate for shifting up to further nineteenth (19) times@10% EACH time to be considered.If necessary further after twenty times of total use, another one number new and labour rate for shifting to be considered accordingly. Total 11.1m height. |
| 171 | Cleaning the exposed corroded Reinforcement as well as worn out concrete by sand blasting with air compressor including all materials, hire charges of machineries and labour etc. all complete as per technical specification and direction of the Engineer-in-Charge. |
| 172 | Cleaning the exposed reinforcement preferably upto full diameter by wire brush, applying two coats of polymer based rust removing compound left for 24 hours, removing the coating and then applying two (2) coats of polymer modified anti corrosive protective coating formulated to inhibit the corrosion of reinforcement as per manufacturer's specification] |
| 173 | Removing corroded worn out portion of reinforcement (when the area of bar is damaged by more than 25%) by cutting and replacing the same by a new plain round bar of requisite diameter by binding with required lap / welding with old bar, including cost of reinforcement, complete in all respect including removing unserviceable materials from site as per direction of the Engineer - in - charge. Note : Payment on weight (KG.) of new reinforcement. |
| 174 | Supplying fitting and fixing I.R.C. fabric mesh with covering battens including cost of screws etc complete (excluding the cost of battens). In ground floor.(j) 25mm x 25mm x 2.2mm x 2.2mm. |
| 175 | Sealing of crack / porous concrete with Epoxy Grout by injection through nipples complete as per clause 2803.1 |
| 176 | Applying 2coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and waterproofing properties by mixing with water in proportion (1bonding agent :4 water:6 cement)as per Manufacturer's specification |
| 177 | Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer. |
| 178 | Taking out shutter of door and window, dismantling by parts (for repair or replacement of damaged parts),reassembling and refitting and rehanging same with old fittings but with new screws as necessary. |
| 179 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (f) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak. 2nd Floor |
| 180 | Washing and cleaning with oxalic acid powder using 33 gms./sq.m. (b) Floor/ dado other than marble |
| 181 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. (b) Sink with drain board 1050 mm X 450 mm X 180 mm |
| 182 | Any other Items covering in PWD SOR (Building works) and PWD SOR (Sanitary & Plumbing Works) and PWD SOR (Road and bridge works) w.e.f 01.11.2017 with latest corrigenda. |
| 183 | Supplying, fitting and fixing white vitreous china best quality approved make Counter top wash basin of Jaguar make (JDS-WHT-25909) with all tools and tackles complete. Ref:W.O: CEH/HHQ/629, dtd.02.02.2024 P.O 5300770125 |
| 184 | Applying latex-based, water-resistant multipurpose admixture (Sika latex power) in plaster complete (SikaLatex® Power : Water : Cement : Sand = 1 : 4 : 8 : 32). Consumption of admixture-45 gm/Sqm/mm thickness Ref:W.O: CEH/HHQ/629, dtd.02.02.2024 P.O 5300770125 |
| 185 | Supplying fitting & fixing of PVC Fluted panel in wall including cutting, placing with necessary screws all complete. Ref:W.O: CEH/HHQ/629, dtd.02.02.2024 P.O 5300770125 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender