Tender For Construction/Beautification Work Of Public Platform In Gram Panchayat Chandrapuri
Tender Value
18.07 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
9 days left
EMD
36100
Bank guarantee accepted
Document Fee
2354
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rampur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction/Beautification Work Of Public Platform In Gram Panchayat Chandrapuri
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upt 1.50 M, and lead upto 30M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundaton trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M from the foundation trenches. (Where machine con not reach/move). For Building work only. (SI.-251). |
| 2 | Providing and injecting chemical emulsion for preconstructional antitermite tratement and creating a chemical barrier under and allaround the column pits, wait tranches, basement excavation, top surface of plinth filling, junction of wall and floor along externel perimeter of building, expansion joints, surrounding of pipes and conduit etc. complet (plinth area of the buidling at ground floor only shall be measured as per I.S.6313 part II 1981) Chloropyrophos or any other approved material such as heptachlor or cholordance will be used the rate of application of chemical emulsion shall be as follows Ch. 8 Item No. 1 |
| 3 | Cement Concrete with 4cm gauge B/B, F/Sand of 1.25 F:M cement proportion 8:4:1 i/csupply of all matrial Labour T&P etc./c in all camp. (S.I.No. 275) |
| 4 | R.C.C Work with cement approved coarse sand and 2 cm gauge approved stone grit in proportion of 1:1.5:3 in foundation and footing excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.GI Binding wire and including necessary centering and shuttering etc. and supply of all materials, labour and T&P etc. required for proper completion of work. Binding wire of supplied by the contractor free of cost. As per S.I. No-283(a) |
| 5 | R.C.C Work with cement approved coarse sand and 2 cm gauge approved stone grit in proportion of 1:1.5:3 in column excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.GI Binding wire and including necessary centering and shuttering etc. and supply of all materials, labour and T&P etc. required for proper completion of work. Binding wire of supplied by the contractor free of cost. As per S.I. No-289 |
| 6 | M-150 class Brick Work in 1:6 cement, C/sand mortar in foundation up to plinth as per (S.I. 303 |
| 7 | R.C.C.work 1:1.5:3 with cement, approved Coarse Sand & 20cm guage stone grit etc. include in plinth & door bend centering & shuttering etc. copletion of work S.I. No.283a |
| 8 | M-150 Brick Work in 1:6 with cement & coarse sand mortar in superstructure in one brick wall i/csupply of all materials.labour etc. complete S.I.No 303,309 310 |
| 9 | P.C.C in 1:2:4 with cement, coarse sand & 20 mm gauge stone grit in hold fasts i/c supply of all materials, labour and T&P etc complete S.I.No. 279A |
| 10 | R.C.C in 1:1.5:3 with cement, coarse sand & 20 mm gauge stone grit in slab including supply of all materials,labour etc complete S.I.No. 284A |
| 11 | R.C.C in 1:1.5:3 with cement, coarse sand & 20 mm gauge stone grit in beam including supply of all materials,labour etc complete S.I.No. 285 |
| 12 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.As per DSR-10.25.1 |
| 13 | M.S. or iron work as in reinforcement in R.C.C. work i/c cutting and bending etc complete S.I. No. 504 sor mbd |
| 14 | Earth work in filling or in embankment in ordinary soil, excavation to be in the form of regular pits not exceeding 1/2 meter (20\\") depth and earth work in embankment to be in 20 cm. (8\\") layers including ramming and dressing the surface to required levels and slopes and also inlcuding 1.50m. (5ft.) lifts and 30M (100ft.) lead. The earth from cutting to be used in making embankment or to be deposited as spoil bankss with in 30M (100ft.) distance as directed by the Engineer-in-charge with five Km. Cartage SI. No. 253A+231A |
| 15 | Sand filling in plinth including supply of sand andincluding all labour and T&P etc.required for proper completion of the work S.I.No. 255 |
| 16 | 12mm thick plaster in 1:4 cement and coarse sand mortar of approved quality i/c supply of all materials,labour etc complete S.I. No. 584 |
| 17 | 12mm thick plaster in 1:4 cement and coarse sand mortar of approved quality i/c supply of all materials,labour etc complete S.I. No. 584+596 Rough Face |
| 18 | Finishing walls with two coat of water proof cement weather coat of approved quality on old treated surface on new work with and one coat of primer icluding supply of all materials, labour etc complete S.I.No.Ch.15 new item 8+9+10 |
| 19 | Oil Distempering two coats with one coat of primer icluding supply of all materials, labour etc complete (S.I.No 649 &650) |
| 20 | Painting two coats of ready mixed paint of approved quality i/c one coat of primer& i/c supply of all materials, labour etc complete (S.I.No.Ch.-15 New Item 1a+2+4(lll) |
| 21 | 40 mm thick C.C.Flooring in 1:2:4 with Lean Cement Concrete with out 4cm gauge B/B, F/Sand of 1.25 F:M cement in proportion 8:4:1in flooring as per (S.I.No. 605) |
| 22 | Providing and fixing glass strips in joints of floors and skirting dado add the time of laying floors flush with floor level including supply of all materials labour and T &Petc. Required for proper completion of the work. S.I. No.631b |
| 23 | Proving wall putty on new surface with approved quality of materials i/c all completed S.I. No. Ch.15 new item 11 |
| 24 | Making drip course in sun shades or facia with 1:3 cement and fine sand mortar as per direction of Engineer-in-cnarge including supply of all materials labour Tools & plants etc. Required for proper completion of the work ch.13 new item 3 |
| 25 | Forming grooves of unifoorm size from 12x12mm in plastered surface Ch.13 New itwm 2 |
| 26 | Wiring point for light with 1.5 sq mm FR PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose/angle/batten holder on 3 mm thick pheonolic laminated backelite sheet etc. complete in all respect as directed by E/I (S.I.No. 131c) |
| 27 | Wiring point for fan with 1.5 sq mm FR PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose/angle/batten holder on 3 mm thick pheonolic laminated backelite sheet etc. complete in all respect as directed by E/I (S.I.No. 133c) |
| 28 | Wiring point for plug with 1.5 sq.mm. PVC insulated single core aluminium conductor cable in heavy gauge rigid steel conduit concrealed in the wall, complete with 8 SWG GI earth continuity wire, piano type switch and socket etc . Complete in all respect including matching colour wash. (S.l.No. 134c) |
| 29 | Supply and fixing fo switch box made up of 16 SWG (1.5 mm) thick M.S. Sheet of 250x250x65 mm size duly painted with red oxide primer and flushed in wall including cutting of brick work. Fixing it to the level with cement sand mortar, including matching colour was with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. As per S.I. No.-163 |
| 30 | Supply and fixing fo switch box made up of 16 SWG (1.5 mm) thick M.S. Sheet of 150x150x65 mm size duly painted with red oxide primer and flushed in wall including cutting of brick work. Fixing it to the level with cement sand mortar, including matching colour was with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. As per S.I. No.-160 |
| 31 | Supply and Fixing of power plug with 15 A/250 volt flush type switch and 5 pin 15 A/250 V flush type universal socket in suitable M.S. box of 175 mm x100 mm x50 mm size with phenolic larninated bakelite sheet cover 3 mm thick fixed with brass machine screw and washer. As per S.I. No- 1139 |
| 32 | Supply and fixing of fan hook fabricated from M.S. rod for ceiling fan each. SI No.-1123 |
| 33 | Supply and Fixing of 6 Amp to 32 Amp. MCB (10KA) C Curve. As per S.I. No- 1002 CAT(A) |
| 34 | Supply and fixing of electronic fan regulator 120-280 V. ISI marker, on the existing switch board including making connections ,required material,labour T&P etc. for proper completion of work to the satisfaction of Engineer in xharge of work. SI No.-1203(A) |
| 35 | Supply of Ceiling Fans with fan motor of A.C Permanent insulation, capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment. The rated voltage 220/240 volts, 50Hz,1-ph AC the fan assemble should consists of down rod blades, shackle canopies eto and with double ball bearing system BEE 5 Star rated- 1200mm sweep (I.S.I. Marka) SI-1501 |
| 36 | Painting latters size above 2.5cm.but up to 8cm. Complete in all respect S.I. No.818 |
| 37 | Painting border line up to 2.5cm. Width with enamel paint Complete in all respect S.I. No.Ch.21 New item 1 |
| 38 | Supply and fixing 10 Dia PVC Pipe ,6 Kg per sqm. Pressure in connection for down pipe S.I. No.730(a) |
| 39 | Construction of information piller in brick work with Black Granite stone(2x3) size with B/W in 1:4 in 1.40m.wide wall,23 to 35 cm thickness & 1.50m. Height above G.L. with plaster in 1:4 as per drawing attached I/C digging & painting of letters ,snowcem two coats & I/C all materials,Labour &T&P etc. Complete. asper sanctioned by S.E. R.E.S. MBD. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender