Tender For Comprehensive Maintenance For Repairs To Joinery, Roofs, Plumbing , Sanitary Fitting And Other Connected Bldg Repair Works And E/M Services In Otm Accn-Iv Under Age B/R-Ii Under Ge (North) Ambala Cantt
Tender Value
42.85 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
15 days left
EMD
85700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance For Repairs To Joinery, Roofs, Plumbing , Sanitary Fitting And Other Connected Bldg Repair Works And E/M Services In Otm Accn-Iv Under Age B/R-Ii Under Ge (North) Ambala Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Part-I (B/R itmes)Dismantling of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar, etc. but excluding ashlar facing, dressed stone work and precast concrete articles ,complete all as specified and as directed. |
| 2 | Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 ,complete all as specified and as directed. |
| 3 | All as per serial item No.02 here in before but except bricks old servicable bricks obtained from serial item No 03 above including removing mortar,cleaning the bricks with water, complete all as specified and as directed. |
| 4 | Material and labour for brick work with sub class -B bricks, in half brick thick walls, built in cement mortar 1:4 straight or curved on plan to any radius, complete all as specified and directed . |
| 5 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key scrubbing down with water, etc. complete all as specified and as directed . |
| 6 | Material and labour rendering 15 mm thick on brick work or concrete wall surfaces in cement mortar 1:4 and finished surface even & smooth without using extra cement ,complete all as specified and as directed. |
| 7 | Material and labour for rendering 15 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:6 and finishing the surface even and smooth without using extra cement ,complete all as specified and as directed. |
| 8 | Material and labour for rendering 10 mm thick on fair faces of brick work or concrete ceiling surfaces, chajjas, etc. in cement mortar 1:3 and finished even and smooth without using extra cement ,complete all as specified and as directed. |
| 9 | Material and labour rough cast plaster 15 mm thick in cement motar 1:4 complete as specified in SSR Part–I, clause 14.22 shall consisting of following:– firstly apply under coat in cement mortar 1:4 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg. which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied, complete all as specified and as directed . |
| 10 | Material and labour for preparation of new plastered/unplastered surfaces of walls, chajjas, roof projection, etc. and applying two coats of cement base paint over a coat of alkali resistant primer ,complete all as specified and as directed. |
| 11 | Material and labour for preparation of newly plastered/ unplastered surfaces of walls and applying two coats of acrylic distemper with painting roller over and including 1 to 2 mm thick wall care putty white cement based in one or two coats to achieve smooth surfaces, ,complete all as specified and as directed. |
| 12 | Material and labour for preparation of new plastered/unplastered surfaces and applying three coats of white lime wash on surfaces of walls, chajjas, roof projection etc., ,complete all as specified and as directed. |
| 13 | Supply and fixinging stainless steel curtain rod 25mm dia having wall thickness 1.00mm fixed with and including stainless steel decorative brackets, two lotto for each rod length at both end etc as in repair ,complete all as specified and as directed. |
| 14 | Supply and fixinging PVC connections 15 mm size and 600 mm of length with PTMT nuts and PVC washers on both ends as in repair complete all as specified and as directed . |
| 15 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed . |
| 16 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 17 | Material and labour for galvanised iron tubing 15mm bore, ISI marked, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors ,complete all as specified and as directed. |
| 18 | Material and labour galvanised iron tubing 20 mm bore, ISI marked, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors ,complete all as specified and as directed. |
| 19 | Supply and fixinging as in repair bib tap 15mm bore fancy type brass chromium plated with long body, ISI marked, wall flanges and capstan head, screwed down, screwed for iron pipe or for brass ferrule ,complete all as specified and as directed. |
| 20 | Supply and fixinging as in repair fancy type pillar tap of 15mm bore, cast copper alloy, with capstan heads, ISI marked, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe ,complete all as specified and as directed. |
| 21 | Material and labour for 75mm bore PVC (SWR) multi-floor trap, plain with grating including jointing with solvent cement as in repair complete all as specified and as directed by the Engineer-in-Charge |
| 22 | Supply and fixinging as in repair brass chromium plated tubular towel rail, 20mm dia, 60cm long between flanges ,complete all as specified and as directed. |
| 23 | Supply and fixinging as in repair 15mm bore cast copper alloy chromium plated angular stop valves, ISI marked, screwed down, high pressure with capstan head, screwed down both ends for iron pipe or for unions ,complete all as specified and as directed. |
| 24 | Supply and fixinging of vitreous china wash hand basin white with pedestal, ISI marked, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling chromium plated and 32 mm dia PVC waste pipe including fixing of waste fitting, etc as in repair ,complete all as specified and as directed. |
| 25 | Supply and fixinging as in repair vitreous china squatting pan, Orissa pattern, 580 mm x 440 mm size, white colour with integral foot rest and PVC SWR 'P' or 'S' trap of pressure rating 6 Kg per square cm complete including provision of cement concrete bedding, connection to trap, outgoing flushing pipe, anti syphonage pipe, etc. ,complete all as specified and as directed. |
| 26 | Supply and fixinging in replacement 10 litre PVC valveless syphonic action type flushing cistern with inlet ball valve float, handle, etc. with and including brackets, flush pipe, etc. and connections of flush pipes to WC ,complete all as specified and as directed. |
| 27 | Supply and fixinging for vitreous china wash down water closet pan (pedestal pattern), white (including fixing bolts but excluding flushing cistern and flush pipe) including plastic water closet seat white closed pattern with flat bottom cover and mild steel chromium plated or aluminium hinges device as in repair ,complete all as specified and as directed. |
| 28 | Supply and fixinging in replacement of 600mmx450mm bevelled edge mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers ,complete all as specified and as directed. |
| 29 | Supply and fixinging of plastic water closet seat cover , white closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hinging device as in repair ,complete all as specified and as directed. |
| 30 | Supply and fixinging of 32 mm dia PVC waste pipe of standard length for wash hand basin / Kitchen sink etc as in repair ,complete all as specified and as directed. |
| 31 | Disconnecting existing water tanks of capacity 500 ltr setting aside (or lowering if required) & cleaning and removing all scale and dirt etc from in side of PVC/RCC tanks and mouths of circulating pipe & writing date on cleaning on the tank with synthetic enamel paint not less than 200mm long and 20mm wide of words and reconnecting and refixing of the tank in position to make it operational, complete, all as specified and as directed by the Engineer-in-Charge. NOTE :- (i) The unit rate shall be included cost of small fittings such as elbow, socket, reducer, tee, union, etc. (ii) The whole process of reconnecting and refixing in position after cleaning/after carrying out water proofing treatment shall be done on the same day to ensure uninterrupted water supply to the occupant, if failing so, Rs. 200/– shall be deducted for each tank per day from the contractor due. |
| 32 | Disconnecting existing water tanks of capacity 1000 ltr setting aside (or lowering if required) & cleaning and removing all scale and dirt etc from in side of PVC/RCC tanks and mouths of circulating pipe & writing date on cleaning on the tank with synthetic enamel paint not less than 200mm long and 20mm wide of words and reconnecting and refixing of the tank in position to make it operational, complete, all as specified and as directed by the Engineer-in-Charge. NOTE :- (i) The unit rate shall be included cost of small fittings such as elbow, socket, reducer, tee, union, etc. (ii) The whole process of reconnecting and refixing in position after cleaning/after carrying out water proofing treatment shall be done on the same day to ensure uninterrupted water supply to the occupant, if failing so, Rs. 200/– shall be deducted for each tank per day from the contractor due. |
| 33 | Supply and fixinging , water storage tank, 1000 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and including 20mm bore tank nipple & one 20mm GI union at outlet and including disconnecting and dismantling of existing water tanks and removing from site all as specified in SSR Part–I , ,complete all as specified and as directed.Note : - The colour of tanks shall be white colour . |
| 34 | Supply and fixinging , water storage tank, 500 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and including 20mm bore tank nipple & one 20mm GI union at outlet and including disconnecting and dismantling of existing water tanks and removing from site all as specified in SSR Part–I , ,complete all as specified and as directed.Note : - The colour of tanks shall be white colour . |
| 35 | Supply and fixinging as in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) ,complete all as specified and as directed. |
| 36 | Supply and fixinging of 15 mm bore Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe as in repair, ,complete all as specified and as directed. |
| 37 | Taking down chowkats or frames with shutter area exceeding 1.50 Square meter and not exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish ,complete all as specified and as directed. |
| 38 | Taking down chowkats or frames with shutter area not exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish ,complete all as specified and as directed. |
| 39 | Taking down shutters of any description area exceeding 01 sqm but not exc 2 sqm each and removing the same from site ,complete all as specified and as directed. |
| 40 | Material and labour for factory made 2nd class hard wood 35 mm thick plain framed panelled shutter( two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both face . The size of rail and style as per IS:1003 (Part-1) kiln seasoned and chemically pressure treated ,complete all as specified and as directed. |
| 41 | Material and labour for factory made 35 mm thick 2nd class hard wood glazed and skeleton shutters,open rebated and prepared to receive glass , gauze etc. (without sash bars) ,edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I, Section-8, clause 8.24 (a) (wood shall be kiln seasoned and chemically pressure treated) ,complete all as specified and as directed. |
| 42 | Supply and fixinging of solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet on single side used instead of plain colour PVC sheet reinforced with MS square tube, edges will be painted to match with prelaminated sheet and fixed in opening ,complete all as specified and as directed. |
| 43 | Supply and fixinging of factory made solid PVC moulded door shutters with particle board core 28 to 30 mm thick (styles) with 2, 4, or 6 raised panel design with 2 mm thick prelaminated moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame at site as per specification and drawing ,complete all as specified and as directed. |
| 44 | Material and labour for rolled mild steel framed work as in chowkats of door or gates of angle or other section with gusset plates, rails braces etc. complete. drilled for fixing for steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and hanging ,door fitting (exclusive of steel sheeting or other covering, running rails and guides) also fastening and fixing conforming to Fe-290-W (Gde E-165) quality 'A' ,complete all as specified and as directed. |
| 45 | Material and labour for PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate as in holdfasts etc., ,complete all as specified and as directed. |
| 46 | S&F double shutter steel window box type ERW hollow P section comprising of glazed and gauged skeleton shutter fabricated from following sections :-(a) ERW hollow P section frame of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos i.e. 01 for glazed shutter and 01 for gauzed shutter ). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces . (b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mm x25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leaf of T – section 20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed winodw leaf .(c) Vertical mullion shall be ERW hollow T -section of size 60 x 25 mm made from 1.25 mm thick MS sheet (d) The above steel window shall be deemed to include the following accessories/ fittings : i) Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape- 04 Nos per window ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf.iii) MS tower bolt stove enamelled 150mm long- 2 Nos per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 No per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 No per leaf vi) Pintal hinges 12 x 75 mm - 2 Nos each leaf vii) 10mm square Guard bar @ 10 cm c/c welded to frame .(viii) Two coat of Synthetic enamel paint over one coat of red oxide primer.(ix) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in gauzed skelton shutter of window with flat iron 15 x 03 mm with steel screws .(x) 3mm thick sheet glass, ordinary quality and with oil putty in square n. exc 0.5 sqm in each pane fixed in glass shutter of window.(xi) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed.Notes : (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit.(ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessoriries as mentioned above.(iii) The window upto 1.00 metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are openable. The window more than 1.00 metre width shall have two openable leaves on both outer side for gauzed shutter and glazed shutter and middle leaf/shutter shall be fixed type. |
| 47 | Supply and fixinging of 150 mm long aluminium handle, cast type, anodised ,complete all as specified and as directed. |
| 48 | Supply and fixinging of 200 mm long, aluminium anodised, barrel tower bolts of extruded section ,complete all as specified and as directed. |
| 49 | Supply and fixinging of 250mm long aluminium alloy, anodized, sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloys to door shutter ,complete all as specified and as directed. |
| 50 | Supply and fixinging of butt hinges 100mm long of stainless steel, medium weight, ,complete all as specified and as directed. |
| 51 | S&F mild steel 150mm, ordinary rat tail rod pattern springs, including roller and roller plate including welding or screwing to MS frame complete all as specified and directed. |
| 52 | Supply and fixinging in repair stainless steel grating 100mm dia with or without waste hole complete all as specified and directed. |
| 53 | Supply & fixing as in repair waste fittings or coupling 32 mm dia brass,chromium plated for sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed ,complete all as specified and as directed. |
| 54 | Supply & fixing as in repair waste fittings or coupling 38 mm dia brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed ,complete all as specified and as directed. |
| 55 | Resecuring or easing & adjusting shutters of any description exc 1 sqm and not exc 2 Sqm each, without taking down shutters complete all as specified and as directed. |
| 56 | Material and labour for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer ,complete all as specified and as directed. |
| 57 | Material and labour for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer ,complete all as specified and as directed. |
| 58 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds and steel window frame glazed with putty or fixed with beads ,complete all as specified and as directed. |
| 59 | Material and labour for sheet glass 3.0mm thick ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters,,complete all as specified and as directed. |
| 60 | Supply and fixinging of stainless steel wire cloths 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple ,complete all as specified and as directed. |
| 61 | Supply and fixinging as in repair stainless steel wire cloths 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple ,complete all as specified and as directed. |
| 62 | Demolition of cement concrete (un–reinforced) in ground floors and pavings not exe 15 cm thickness (below or above ground level) complete, all as specified and as directed . |
| 63 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises ,complete all as specified and as directed. |
| 64 | Material and labour for Non Skid coloured ceramic tiles joint free premium/1st quality 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 ,complete all as specified and as directed. |
| 65 | Material and labour for Non Skid coloured ceramic tiles joint free premium/1st quality of same description as of floor tiles in serial item No. 64 above but 100mm to 200mm height as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 ,complete all as specified and as directed. |
| 66 | Material and labour for glazed ceramic coloured tiles joint free premium/1st quality in vertical surfaces/skirtings/dados of size 300x 600x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on faces of brick / concrete surfaces in cement mortar 1:4 ,complete all as specified and as directed. |
| 67 | Material and labour 1st class premium quality vitrified floor tiles 08 to 10 mm thick of size not less than 600x600 mm conforming to IS: 15622, of approved make, in all colours and shades, laid over 15 mm thick cement mortar 1:6 (1 cement : 6 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete all as specified and as directed . |
| 68 | Material and labour 1st class premium quality vitrified tiles in vertical surfaces/ skirtings /dados using tiles 08 to 10 mm thick of size 600x600 mm conforming to IS: 15622, of approved make, in all colours and shades, including grouting the joints with white cement and matching pigments and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 complete, all as specified and as directed. |
| 69 | Material and labour for 8 to 10mm thick heavy duty vitrified coloured paver tiles of size 300mm x 300mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:4) , ,complete all as specified and as directed. Make: Endura of Johnson or Durastone of Somany or equivalent make given in App ‘B’ |
| 70 | Material and labour cement concrete chequred tiles of size 300 x 300 mm x10 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete.all as specified and as directed. |
| 71 | Material and labour for machine cut kota stone slab flooring 18 to 22 mm thick ( each slab not less than 550mm x 550mm) in floor/landing/treads of stairs, set and jointed in neat cement slurry with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing (granite finish) over and including 15 mm thick screed bed in Cement Mortar 1:4, complete all as specified and directed . |
| 72 | Material and labour for machine cut kota stone slab flooring 18 to 22 mm thick in skirting/risers , set and jointed in neat cement slurry with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing (granite finish) over and including 10 mm thick rendering in Cement mortar 1:4 , complete all as specified and directed . |
| 73 | Material and labour for 18 to 20mm thick Granite stone of black shade work (table rubbed, polished & moulding), as in floors, cooking platforms and like bedded with and including 15 mm thick screed bed in CM (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointed with white with admixture of pigment to match with shade of granite stone including grinding, polishing, rounding and moulding of stone slabs on edges, including dismantling of existing stone slabs including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 74 | Material and labour for 16-18 mm thick granite stone (any type) as on verticle surfaces including rubbing polishing, cutting opening, rounding to exposed edges and pointed with coloured cement to match the shade over and including on 10mm thick rendering in cement mortar 1:4 directed by the engineer-in-charge. |
| 75 | Material and labour for 25 mm thick PCC 1:2:4, type B0 as in sub base of floor (using 12.50mm graded crushed stone aggregate), finished even & fair without using extra cement ,complete all as specified and as directed.Note- This item shall not be executed in the location, where dismantling of tiles only have been done. |
| 76 | Material & Labour providing 75 mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregates as in sub base ,complete all as specified and as directed. |
| 77 | Taking down eaves gutters, soil waste and rainwater pipes (in any size in any position or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified & directed. |
| 78 | Supply and fixinging 110mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified and directed ..(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985) |
| 79 | Supply and fixinging 110 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, ,complete all as specified and as directed. |
| 80 | Supply and fixinging 75mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985) |
| 81 | Supply and fixinging 75 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified. (Note- UPVC bends shall be confirm to BS 4515 DIN 19531 and DIN 19534) |
| 82 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc or for shafts, wells, manholes etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil ,complete all as specified and as directed. |
| 83 | Material & Labour concrete bed in PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate to drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 110 mm dia (internal) pipes ,complete all as specified and as directed. (Pipes shall be measured & paid separately). |
| 84 | Material & Labour 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete, all as specified and as directed . |
| 85 | Returning, filling in, including spreading, levlling ,watering and well ramming in layers not exceeding 25 mm thick each layer, ,complete all as specified and as directed. |
| 86 | Removing surplus excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, ,complete all as specified and as directed. |
| 87 | Supply and fixinging of aluminium (Die-cast) body hydraulically door closer regulated, designation No.3, universal type, suitable for door shutters of 851 mm to 1000 mm in width and weight between 61 to 80 Kg as in repair ,complete all as specified and as directed. |
| 88 | Supply and fixinging of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty as in repair ,complete all as specified and as directed. |
| 89 | Dismantling of boarding/ceiling of any description and in any position of any size ,complete all as specified and as directed. |
| 90 | Supply and fixinging of GI Metal Suspended ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, and as directed by Engineer-in-charge. GI Metal Ceiling laying perforated Tengular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fibre acoustical fleece. Note- Ceiling tiles and ceiling grid shall be of the same make. |
| 91 | Supply and fixinging 8-10mm thick flute profile designer PVC paneling with panel of width 250mm to 300mm fixed to wall/ceiling with screw and rawel plug including PVC beading (U,L section) wherever required.,complete all as specified and as directed. |
| 92 | Supply and fixinging 5-8mm thick solid/ Hollow profile designer PVC paneling (thickness of inner wall 0.70mm to 1.00 mm) with panel of width 250mm to 300mm fixed to wall/ceiling with screw and rawel plug including PVC beading (U,L section) wherever required.complete all as specified and as directed . |
| 93 | Material and labour for preparation of old decorated brick/concrete, plastered / unplastered surfaces of ceiling by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white lime wash on prepared surfaces of ceiling etc. ,complete all as specified and as directed. |
| 94 | Material and labour for preparation of old decorated brick/concrete, plastered / unplastered surfaces of ceiling by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of acrylic distemper with painting roller over prepared surfaces of ceiling etc. ,complete all as specified and as directed. |
| 95 | Material and labour for preparation of old decorated brick/concrete, plastered / unplastered surfaces of walls by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of acrylic distemper with painting roller over prepared surfaces of walls pillars, cornices etc. ,complete all as specified and as directed. |
| 96 | Material and labour for complete removal of existing treatment from wall by scrappers or any other means and washing , rubbing down and stopping applying two coats of acrylic distemper over and including 1 to 2 mm thick wall care putty white cement based in one or two coats to achieve smooth surfaces, of walls of any description using painting roller after preparation of brick/concrete, plastered / unplastered surfaces of walls complete all as specified and as directed . |
| 97 | Material and labour preparation of old decorated brick/concrete, plastered / unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint on the wall, pillars, cornices etc ,complete all as specified and as directed. |
| 98 | Material and labour preparation of old decorated brick/concrete, plastered / unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of cement base paint on the wall, pillars, cornices etc ,complete all as specified and as directed. |
| 99 | Material and labour preparation of old decorated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint ,complete all as specified and as directed. |
| 100 | Material and labour preparation of old decorated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint ,complete all as specified and as directed. |
| 101 | Schedule 'A' Part-II (E/M itmes)Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, socket outlet, etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and as directed. |
| 102 | Material and labour for point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling surfaces and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade, ISI marked with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes modular type of size/modules as required at site with earth dolly (boxes shall be galvanised or painted with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally) including provision of new covered plate over sunken box for housing the modular switches , modular socket outlets,modular fan regulators etc. for one light/fan/exhaust fan/bell point controlled by one way switch, complete all as specified and as directed. Note :- a) .All chases will be cut by chase cutter only b) Switch, socket outlet and fan regulators to be measured and paid for separately . |
| 103 | Description all as per serial item No.102 here-in-before but for One 3 pin, 6 Amps, socket outlet controlled by one switch on independent board, complete all as specified and as directed. |
| 104 | Description all as per serial item No.102 here-in-before but for One 3 pin 6 Amps socket outlet controlled by one switch on same board, complete all as specified and as directed. |
| 105 | Description all as per serial item No.102 here-in-before but for one socket outlet 16 Amp with 2.50 sq mm PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 2.50 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade, ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly, ,complete all as specified and as directed.Note : (i) Point wiring shall be done in a manner that not more than 02 socket point executed in one circuit.(ii) Each socket point will be measured and paid as per point. |
| 106 | Supply and fixing of modular switch 1 module, single pole, one way 6 Amps flush type, 230 volts complete all as specified and as directed. |
| 107 | Supply and fixing of modular switch 1 module, single pole, one way 16 Amps flush type, 230 volts complete all as specified and as directed. |
| 108 | Supply and fixing of modular bell push 6 Amp, 1 way, 1 module, 230 volts complete all as specified and as directed. |
| 109 | Supply and fixing of modular socket outlet 2/3 pin combined, 6 Amp, one way, two module, 230 volts complete all as specified and as directed. |
| 110 | Supply and fixing of modular socket outlet 3/3 pin combined, (6pin), 6 and 16 Amps, one way, two module, 230 volts complete all as specified and as directed. |
| 111 | Supply and fixing as in repair electronic Fan regulator modular 100 watt, 1 module, 230 volts , 50 Hz, AC supply suitable for ceiling fan any type/make/sweep complete all as specified and as directed. |
| 112 | Supply and fixing ceiling rose surface type 2/3 terminal polycarbonate, isolated body complete all as specified and as directed. |
| 113 | Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed. |
| 114 | Supply and fixing in repair LED batten fitting 10 watt, 2 feet, polycarbonate housing with electronic driver cool/warm type, connecting with copper conductor flexible cable from ceiling rose to connector of the light ,complete all as specified and as directed. |
| 115 | Supply and fixing in repair LED batten fitting 20 watt, 4 feet, polycarbonate housing with electronic driver cool/warm type, connecting with copper conductor flexible cable from ceiling rose to connector of the light ,complete all as specified and as directed. |
| 116 | Supply and fixing in repair, LED surface mounted bulk head luminaries 8-10 watt with min 800 lumen, IP 65, aluminium housing, surge protection including driver and LED lamp, etc. complete with all accessories, connecting with copper conductor flexible cable from ceiling rose to connector of the light ,complete all as specified and as directed. |
| 117 | Supply & fixing in repair, 9/12 watt thermoplastic wall mounting fixture (sketch type) with B-22 LED lamp and including connecting with copper conductor flexible cable from ceiling rose to connector of the light complete and removing unserviceable light fittings ,complete all as specified and as directed. |
| 118 | Supply & fixing in repair, LED Bldg Security Light Fittings of capacity 40-45 watt made up of die cast aluminium housing with black epoxy powder coating with cover heat resistance glass safety input voltage range 170 to 270 volts, industrial model with IP-65 protection and other connected accessories including electronic driver and making electrical connection, ,complete all as specified and as directed. |
| 119 | Supply & fixing in repair, service bracket of mild steel pipe 25 mm bore medium grade of length 0.70 mtr fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts and washer and suitable reducer for connecting fitting to GI pipe as required at site including two coats of synthetic enamel paint over one coat of red oxide primer on mild steel work ,complete all as specified and as directed. |
| 120 | Supply & fixing in repair, LED flat panel 2' x 2' size fully difused surface/ recess mounted fitting (grid/ gypsum type) 36 watt , 5700K, warm/cool white with powder coating and CRCA front cover including frame with provision of PVC flexible copper conductor cable from ceiling rose to light fitting as in repair complete all as specified and as directed . |
| 121 | Supply & fixing LED post top luminaire 40W, 5700K, IP-65 made of pressure die-cast aluminium housing & clear glass 240 volt, 50HZ, AC supply complete with all accessories, including electronic driver, internally pre wired including provision of 3 core PVC flexible copper conductor from electric supply source to connector of the light, including disconnecting and taking down existing light fitting and removing old unserviceable fitting complete all as specified and as directed . |
| 122 | Supply & fixing single pole and neutral enclosure with a two pin and earth plug and socket 20 Amp complete with and including one single pole MCB 20 Amp, 10 KA 'B' curve including removing old unserviceable enclosure complete all as specified and as directed . |
| 123 | Supply and fixing as in repair modular PVC sheet/cover plate with frame 3 way suitable for fixing switch/socket/fan regulators etc on existing MS boxes of any make as per site requirement including removing unserviceable items, complete all as specified and as directed . |
| 124 | Supply and fixing as in repair modular (PVC sheet) cover plate with support frame 4 ways suitable for fixing switch/socket/fan regulators etc on existing MS boxes of any make as per site requirement including removing unserviceable items, complete all as specified and as directed. |
| 125 | Supply and fixing as in repair modular (PVC sheet) cover plate with support frame 6 ways suitable for fixing switch/socket/fan regulators etc on existing MS boxes of any make as per site requirement including removing unserviceable items, complete all as specified and as directed. |
| 126 | Supply and fixing as in repair modular (PVC sheet) cover plate with support frame 8 ways suitable for fixing switch/socket/fan regulators etc on existing MS boxes of any make as per site requirement including removing unserviceable items, complete all as specified and as directed . |
| 127 | Supply and fixing as in repair modular (PVC sheet) cover plate with support frame 12 ways suitable for fixing switch/socket/fan regulators etc on existing MS boxes of any make as per site requirement including removing unserviceable items, complete all as specified and as directed . |
| 128 | Supply and fixing MCB, SP, 6-32 Amps, 240 volt,10 KA , 'B' curve as per site requirement including removing old unserviceable MCB ,complete all as specified and as directed. |
| 129 | Supply and fixing MCB SPN 32 Amps, 240 volt,10 KA , 'B' curve as per site requirement including removing old unserviceable MCB ,complete all as specified and as directed. |
| 130 | Supply and fixing MCB SPN, 63 Amps, 240 volt,10 KA , 'C' curve as per site requirement including removing old unserviceable MCB ,complete all as specified and as directed. |
| 131 | Supply and fixing sheet metal MCB DB SPN 8 way with 200 Amps rated bus bar single pole and neutral with double door IP-54 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure complete all as specified and as directed . |
| 132 | Supply and fixing sheet metal MCB DB SPN 12 way with 200 Amps rated bus bar single pole and neutral with double door IP-54 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure complete all as specified and as directed . |
| 133 | Supply & laying as in repair sub main wiring with two run of 4 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 4 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires ,complete all as specified and as directed.Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 134 | Supply & laying as in repair sub main wiring with two run of 6 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 6 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires ,complete all as specified and as directed.Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 135 | Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty 2 core, 6 sq mm nominal cross section cable with PVC insulated aluminium conductor multistranded served with an inner sheathing of PVC tape and overall PVC sheathed in service connection, including disconnecting and taking down old U/S existing cable ,complete all as specified and as directed. |
| 136 | Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty 2 core, 10 sq mm nominal cross section cable with PVC insulated aluminium conductor multistranded served with an inner sheathing of PVC tape and overall PVC sheathed in service connection, including disconnecting and taking down old U/S existing cable ,complete all as specified and as directed. |
| 137 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15mm bore(medium grade) and connected to earthing test point as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm c/c both ways with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing as in repair complete all as directed by Engineer-in-Charge and earth testing on completion . |
| 138 | Supply and fixing sheet metal enclosure Vertical triple pole & neutral (VTPN) IP-43 4 way including MCCB TPN 63 Amp, 16 KA, 415 volts, with 200 Amp rated bus bar flush /surface mounting double door duly grouted in solid block wall or on wooden board in and including lugs/thimbles duly crimped for connection including making smooth the disturbed surface including removing old unserviceable enclosure complete all as specified and as directed . |
| 139 | Note:- Amount of credit of Rs.50,916.00 for retrieved materials is mentioned in Schedule of Credit Page No.123 & 124 of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender