Tender For special repair To electrical installation Of Internal House Wiring And External Lighting In Block - A , B & C Of 12 Nos. D-Type Qtr. In Judicial Officers Colony, Near Indoor Stadium At Deoghar.
Tender Value
25.10 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
0 days left
EMD
50500
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Deoghar → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special repair To electrical installation Of Internal House Wiring And External Lighting In Block - A , B & C Of 12 Nos. D-Type Qtr. In Judicial Officers Colony, Near Indoor Stadium At Deoghar.
BOQ
| Sl. No. | Item Description |
| 1 | Part - AS/R to E.I. of Enternal house wiring in Block - A, B & C of 12 Nos. D - type Qtr. |
| 2 | Wiring for light point , fan point , exahust fan point , call bell point with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit with piano type switch , phenolic laminated sheet , suitable size G.I / PVC box etc as reqd . |
| 3 | a) Group - A |
| 4 | Wiring for light/ power plug with 2x4 sq mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit along with 1 no 4 sq mm FR PVC insulated copper conductor single core cable for loop earthing as reqd. |
| 5 | Wiring for circuit submain wiring along with earth wire with the following size PVC insulated copper conductor , single core cable in surface / recessed PVC conduit etc as reqd . |
| 6 | a) 2x1.5 sq mm + 1x1.5 sq mm Earth wire (For 5/6 Amp double socket board wiring.) |
| 7 | b) 2x2.5 sq mm + 1x2.5 sq mm Earth wire (For light circuit) |
| 8 | d) 2x4.0 sq mm + 1x4.0 sq mm Earth Wire ( For light submain) |
| 9 | e) 2x6.0 sq mm + 1x6.0 sq mm earth wire ( For power submain) |
| 10 | f) 2x4.0 sq. mm, + 1x4.0 sq. mm, Earth wire (For A.C. Point wiring direct from busbar) |
| 11 | g) 1x1.5 sq mm (For Inverter wiring) |
| 12 | Supplying and fixing suitable size GI/PVC box of 75 mm x 75 mm x 50 mm deep on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch. connection, painting etc. as required (For light plugs to be used in non residential buildings) |
| 13 | Supplying and fixing suitable size GI/PVC box of 121 mm x 173mm x 48mm/(6\\" x 8\\") (nominal size ) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch. connection, painting etc. as required |
| 14 | Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 15 | S/F a compact unit made of 72mm x 146mm x 48mm deep / (4''x7'') G.I./PVC box with phenolic laminated sheet cover in front of fixed with 2 Nos. of 5/6 Amp, 3 pin piano type socket and 2 Nos. 5/6 Amp, piano type one way switch well connected with suitable wire earthing etc. as reqd. name as double socket board. |
| 16 | a) 4''x7'' PVC Box - 1 Nos @ 124.00 = 124.00 |
| 17 | b) 5/6 Amp switches - 2 Nos @ 32.00 = 64.00 |
| 18 | c) 5/6 Amp socket - 2 Nos @ 43.00 = 86.00 |
| 19 | Total = 274.00 |
| 20 | Providing and fixing following DP/TP&N sheet metal switch disconnector fuse unit in the existing metal board with rewireable type fuses, including drilling holes in metal board . making connections. etc. as required. |
| 21 | a) 63 amps, double pole (For 16 Nos. Qtr.) |
| 22 | S/F 63 Amp, 415 Volt Heavy duty three phase with netural busbar chamber. |
| 23 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator) |
| 24 | a) 2 way single door. |
| 25 | a) 8 way, double door. (For ligh & power) |
| 26 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, “B” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required. |
| 27 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required. |
| 28 | a) 32 amp D.P. MCB |
| 29 | b) 63 amp D.P. MCB |
| 30 | Supplying and fixing of following piano type switch / socket on the existing switch box / cover including connections etc. as required. |
| 31 | a) Electronic step fan regulator Delux. |
| 32 | S/F 2 pin 5 Amp Ceiling rose on the existing junction box etc as reqd. |
| 33 | Supplying and fixing batten/ angle holder including connections etc as reqd. |
| 34 | Supplying and fixing Ding-Dong sound call bell single phase. 230 volt, complete as required |
| 35 | S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230V 50Hz, single phase supply etc. complete as required. |
| 36 | a) 20/22W LED Tube light |
| 37 | S/F 9/10 watt LED bulb |
| 38 | S.I.T.C. of following size ceilling fan 3 blades confirming to IS:374:2019 including wiring the down roadsof suitable length (up to 30cm) with 1.5 sq. mm. PVC insulated, copper wire suitable for 230V 50Hz, single phase supply etc. complete as reqd. |
| 39 | a) 1200 mm (48'') ceiling fan |
| 40 | S/F 12'' (300mm) metal exaust fan |
| 41 | Supplying and laying of XLPE insulated PVC sheathed aluminium armoured cable working voltage upto 1100 volts as per IS: 7098 (Part I) of following sizes. |
| 42 | a) 2 core 10 sq mm (From main panel to Each Qtr. Service connection.) |
| 43 | b) 3.5 core 50 sq mm (From electric pole to main panel in 3 Block.) |
| 44 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as reqd. Up to 35 sq. mm, Clamped with 1mm thik G.I. Saddle) |
| 45 | Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 35 sq mm to 95 sq mm direct in ground including excavation, and refilling the trench etc as rquired. But Excluding sand cushioning and protective covering. |
| 46 | Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required. |
| 47 | Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required. |
| 48 | Fabrication and installation of wall mounted cubical panel with following accessories made of 16 SWG M.S sheet painted with one coat steel primer and two coat power spray painting with approved shade including fitting / fixing / connection & transportation up to work site, labour charge etc all complete. |
| 49 | 125 amps, MCCB 10 KA fixed thermal setting = 1 Nos. |
| 50 | LED Indecator lam R/Y/B/G = 3 Nos. |
| 51 | 25mm x 5mm copper strips (1.15 kg/mtr) = 6 Kg |
| 52 | Part - BS/R to External lighting in Block - A, B & C of 12 Nos. D - type Qtr.in Judicial officers colony, Near Indoor Stadium at Deoghar. |
| 53 | S.I.T.C of floowing rating LED Street lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/section-3 and shall be complete with all neccssary accessories as required |
| 54 | a) 90w L.E.D. Street light. |
| 55 | S.I.T.C of following rating LED Post top lamp made in die cast aluminium housing with decorative clear/opal serylic diffuser on existing pipe including connection with 1.5sq.mm. copper conductor etc all complete as required. |
| 56 | a) 20/25w LED Post to lamp clear (For Gate light.) |
| 57 | Supplying and fixing Cable junction Box with 6 amp SP MCB (Make - Sintex/Hensel or equivelant. |
| 58 | Supply of XLPE insulated PVC sheathed heavy dutty, armoured electrical cable with aluminium conductor for working voltage up to 1100 volts. Including conforms to IS:7098, part-1) |
| 59 | a) 2 core 6 sq, mm. (For Gate light & security light) |
| 60 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as reqd. Up to 35 sq. mm, Clamped with 1mm thik G.I. Saddle) |
| 61 | Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 35 sq mm direct in ground including excavation, and refilling the tranch etc as reqd. But excluding sand cushioning and protective covering. |
| 62 | S/F PVC / G.I box of following size on surface or in recess with suitable size of phenolic laminated sheet cover inforant including painting etc as reqd. |
| 63 | a) 72 mm x 146mm x 48mm deep/ (4\\" x 7\\") |
| 64 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required. |
| 65 | a) 32 Amp, double pole MCB |
| 66 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator) |
| 67 | a) 2 way single door. |
| 68 | Add Dismentle Charge @1% |
| 69 | Less Scrap @2% |
| 70 | CGST@9% |
| 71 | SGST@9% |
| 72 | Add labour cess @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender