Tender For Thorough Attention Of Mayur Vihar Phase1, Anand Vihar, Welcome & Johri Enclave And Other Miscellaneous Works At Line-7E Metro Stations.
Tender Value
7.10 Crore
Estimated cost
Bid Submission
07 Sep 2026
24 days left
EMD
7.10 Lakhs
Bank guarantee accepted
Document Fee
23600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Thorough Attention Of Mayur Vihar Phase1, Anand Vihar, Welcome & Johri Enclave And Other Miscellaneous Works At Line-7E Metro Stations.
BOQ
| Sl. No. | Item Description |
| 1 | Total of Schedule-A (DSR Civil-2023 Items) + Schedule-B (NDSR Items) |
| 2 | Total of Schedule-C(Manpower Items) |
| 3 | Total of Schedule-A (DSR Civil-2023 Items) |
| 4 | Total of Schedule-B(NDSR Items) |
| 5 | Total of Schedule-C(Manpower Items) OCW-2278 APPENDIX- 3A PROFORMA FOR STATEMENT OF MINOR DEVIATIONS (Refer Clause C 2.2(d) and C 15.1 of ITT) 1. The following are the particulars of minor deviations from the requirements of the Tender Document: Sr. No Clause Deviations Price reduction for each deviation/s Note : 1. The Tenderer shall indicate price reduction against each deviation in Appendix-3A of BOQ. This price is the price which the tenderer shall reduce from this tender price if deviation(s) is/are accepted by the Employer. 2. Where there is no deviation, the statement should be returned duly signed with an endorsement indicating ‘No Deviations’. In case, Performa of deviations is not submitted or submitted as blank, it will be construed that the tenderer has not proposed any deviations from tender documents. 3. It shall be noted that in case Nil/Zero/NA Price quoted by Tenderer in Appendix-3A then it shall mean that contractor has quoted same price for deviation and undeviation bid. 4. If the tenderer proposes deviations in tender documents, and/or any other terms and conditions of the tender, other than in this Appendix, it will have no effect. Signature of authorized signatory On behalf of Tenderer OCW-2278 S.NO Preamble |
| 6 | The Bill of Quantities shall be read in conjunction with Notice Inviting Tenders, Instructions to Tenderers, General and Special Conditions of Contract, Employer's Requirement, Technical Specification and other relevant documents. |
| 7 | BoQ1 consists of Schedules i.e. Schedule-A (DSR CIVIL-2023 Items), Schedule-B (NDSR items) & Schedule-C NDSR (Manpower) |
| 8 | Tenderers shall quote their offer in Indian Rupees (₹) only. Tenderers are required to quote percentage (%) Excess/Less for Schedule-A & Schedule-B & (%) Excess in Schedule-C in figures in the appropriate highlighted cells in the BoQ1 sheet. |
| 9 | The rates and prices to be tendered in the unit Priced Bill of Quantities are for completed and finished items of works and complete in all respect. It will be deemed to include Duties, Taxes, Octroi, Royalty etc., cost of all plants, labour, supervision, materials, transport, all temporary works, erection, maintenance, utility identification, contractor’s profit and establishment/overheads, together with preparation of design and drawings, all general risks, insurance liabilities, compliance of labour laws and obligations set out or implied in the contracts. For taxes and duties refer clause C2.4 & C2.5 of ITT & clause 10 of SCC . |
| 10 | The price offer in the BOQ shall be given without considering any deviation mentioned in Appendix-3 of FOT i.e. price in the box shall be quoted as per tender conditions without any deviation. |
| 11 | If the tenderer fails to quote rates against any item, the tender may be treated as incomplete and non-responsive and shall be rejected. |
| 12 | Errors will be corrected by the employer for any arithmetical errors in computation or summation as per contract conditions. |
| 13 | The Financial Proposal (as per BOQ) shall be uploaded online on the website https://etenders.gov.in/eprocure/app The rates shall be quoted in the excel file provided in the bid documents. The tenderer shall download the excel file and quote the rates in BoQ1. After quoting their rates the excel file shall be uploaded accordingly. The rates shall not be offered/quoted elsewhere in the technical submission/ tender submission. |
| 14 | The actual work executed against all the BOQ items in Schedule A, B & C as detailed in tender document would be paid on measurement basis. |
| 15 | The contractor may raise their “On Account” payments on monthly basis as per the status of work on the last day of the respective month. |
| 16 | In case of DSR item the description is given in brief and detailed description of item should be as given in DSR 2023 (Civil) published by CPWD. Please Enable Macros to View BoQ information BILL OF QUANTITIES Contract No.: OCW-2278 - \\" Thorough attention of Mayur Vihar Phase1, Anand Vihar, Welcome & Johri Enclave and other miscellaneous works at Line-7E Metro Stations.\\" Item Code Description of Items Unit Rate (Rs.) Qty Amount (Rs.) Including GST Schedule-A (DSR Civil-2023 Item) |
| 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.2 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mmnominal size derived from natural sources) cum 8340.85 25.0 208521.25 |
| 18 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing. moulding and polishing of edges to give high gloss finish etc. complete at all levels. 8.2.2 Granite stone slab of colour black, Cherry/Ruby red 8.2.2.1 Area of slab upto 0.50 sqm sqm 5413.5 300.0 1624050.0 |
| 19 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 20 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for ccupation. Base frame work for ACP cladding is payable under the relevant aluminium itemsThe Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. |
| 21 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes kg 194.4 8000.0 1555200.0 |
| 22 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.1 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete kg 123.6 12000.0 1483200.0 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 172.6 10000.0 1726000.0 |
| 23 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 24 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 11.26.1 25 mm thick sqm 1948.25 500.0 974125.0 |
| 25 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 11.41.2 Size of Tile 600x600 mm sqm 1553.45 1500.0 2330175.0 |
| 26 | 12 mm cement plaster of mix : 13.1.1 1:4 (1 cement: 4 fine sand) sqm 347.05 500.0 173525.0 |
| 27 | 12 mm cement plaster of mix : 13.4.1 1:4 (1 cement: 4 coarse sand) sqm 357.35 1000.0 357350.0 |
| 28 | 20 mm cement plaster of mix : 13.6.1 1:4 (1 cement: 4 coarse sand) sqm 487.4 1000.0 487400.0 |
| 29 | Finishing walls with textured exterior paint of required shade : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @2.20kg/10 sqm sqm 223.6 24000.0 5366400.0 |
| 30 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.46.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90litre/10 sqm) sqm 171.1 44000.0 7528400.0 |
| 31 | Applying priming coat: 13.50.3 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works sqm 67.4 1200.0 80880.0 13.50.4 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) sqm 36.1 1200.0 43320.0 |
| 32 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. 13.52.1 On steel work sqm 241.75 4000.0 967000.0 |
| 33 | Painting with synthetic enamel paint of approved brand and manufactureto give an even shade : 13.61.1 Two or more coats on new work sqm 155.9 2000.0 311800.0 |
| 34 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 35 | Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 13.83.2 Two coats sqm 142.8 42000.0 5997600.0 |
| 36 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 37 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 14.1.2 With cement mortar 1:4 (1cement: 4 coarse sand) sqm 560.5 3000.0 1681500.0 |
| 38 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
| 39 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retainhorizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) |
| 40 | Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 41 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineerin-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 42 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 43 | Laying old cement cocrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin-charge. (Old CC paver blocks shall be supplied by the department free of cost). |
| 44 | Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50 m x2.00 m made of 40x40x6 mm angle iron or 50x50x3 mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5 mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5 m. MS channel ISLC 75 @ 5.70 kg/m, 50 cm long shall be provided at the bottom having oval shaped holes of size 50x25 mm at both ends with 50 cm long MS angle 40x40x6 mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250 mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously including shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge.(Note :- One time payment shall be made for providing barricading from start of work till completion of work including shifting. The barricading provided shall remain to be the property of the contractor on completionof the work). metre 3439.5 500.0 1719750.0 16.90. Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. sqm 2017.6 500.0 1008800.0 |
| 45 | Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100 mm c/c on both ways, neat cementpunning on finished surface, properly encased on all edges with 1.6 mm thick, 100 mm wide MS sheet duly painted over priming coat, reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc including cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge. Sub Total (DSR Civil-2023 Item) 54879535.75 Any other DSR Civil-2023 Items 6000000.0 Total Schedule-A (DSR Civil-2023 Item) 60879535.75 Total Schedule-A (DSR Civil-2023 Item) after considering adjustment factor 0.973 (Inclusive of GST@18%) 59235788.28 Total Schedule-A (DSR Civil-2023 Item) after considering adjustment factor 0.973 (Exclusive of GST) 50199820.58 Schedule-B (NDSR Items):- NDSR-1 Polycarbonate sheet: Providing and fixing of leak proof fire resistance and UV resistance at all height of Lexan compact clear sheet of 5mm thick GE plastic or approved equivalant make confirming to IS14443-1987 the rates i.e the cost of fasteners silicon sealent, EPDM gasket and all other ancillary works as required for completion of work as per Engineer- in- charge are inclusive. Sqm 2645.04 100.0 264504.0 NDSR-2 Roof Covering: Providing and fixing single skin Hi-rib Profiled sheeting 930-1020 mm cover width 28-30 mm crests @ 186-333 mm c/c manufactured out of 0.45 mm BMT ( base metal thickness) Hi-tensile galvalume/zinclume steel sheets shall have wide pans with 2-3 nos. stiffning ribs for effective water shedding and special male/female ends with full return legs on side laps for purlin supports on both surfaces including side and end caps.(Roof of buildings) Sqm 612.07 300.0 183621.0 NDSR-3 Polycarbonate sheet: Providing and fixing 10 mm thick poly carbonate sheet make GE plastic or approved equivalant and make confirming to IS14443-1987 of required color, fasteners, silicon sealent, EPDM gasket and shade including self drilling/self taping screw as per requirement. Sqm 1621.84 50.0 81092.0 NDSR-4 Polycarbonate sheet: Providing, supplying, erecting and fixing in position 3 mm thick poly carbonate sheet of approved color and texture. Cost to include jointing, sealing with butul adhesive and tape etc. as per manufactures specification and cover all cost of labours tools, plants, temporary works etc. all complete. Sqm 863.36 100.0 86336.0 NDSR-5 Providing and fixing 6 mm thick toughened glass in existing frame subframe with EPDM rubber gasket silicon sealent and necessary pressure clip as and where required.The rate quoted shall be inclusive of fixing and grinding corners and required hole etc all complete and all taxes etc .The contractor shall visit the site and take exact measerement of size in which glass is to be provided at various location. Sqm 1354.84 100.0 135484.0 NDSR-6 Providing and fixing 10 mm thick toughened glass in existing frame subframe with EPDM rubber gasket silicon sealent and necessary pressure clip as and where required.The rate quoted shall be inclusive of fixing and grinding corners and required hole etc all complete and all taxes etc .The contractor shall visit the site and take exact measurement of size in which glass is to be provided at various location. Sqm 1636.21 100.0 163621.0 NDSR-7 Supply of Sky lift on hire charges basis 20 mtr long boom for 8 hours (per day) including operators, all arrangement of safety, barricades, Traffic marshal etc. all complete as per direction of engineer-in-charge. Per Shift 5124.81 300.0 1537443.0 NDSR-8 Providing and Operating Diesel Boom Lift of 25-28 metre reach. Rate shall include diesel charges, one operator with all safety items complete and loading/unloading of man lifter at site. Rate is inclusive of all taxes/levies/cartage/GST etc. The rate shall include provision of traffic marshall and safety equipments like baton light while working at main road. Per Shift 6486.98 150.0 973047.0 NDSR-9 Providing fixing on wall face unplasticised rigid PVC rain water pipes (working pressure 6 kg/cm^2) conforming to IS:13592 Type:A including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion.(i) Single socketed pipes 0.0 0.0 a 200 mm diameter Mtr 1200.18 400.0 480072.0 NDSR-10 Providing fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised PVC rain water pipes (working pressure 6 kg/cm^2) conforming to IS:13592 Type:A including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion. 0.0 0.0 a 200 mm x 100 mm Dia, Reducer Tee Each 1309.79 100.0 130979.0 b 200 mm x 200 mm Dia, Bend Each 471.3 100.0 47130.0 NDSR-11 FRP Gutter: Supplying, Fabricating & fixing FRP sheet 4 mm thick. Rates are inclusive of all tools, plants such as cutter, welder, generator set supply, drill power hammer drilling machine. Cutting, scaffolding, transportation of material to site of work and rate also inclusive of all skilled and unskilled labour work & to be carried out as per direction of Engineer in charge. Rate are inclusive of all night charges, lead, ascent & decent all complete (FRP sheet will be fire retardent and certificate is to be submitted). Work inclusive scaffolding chargesfor removing of old MS sheet & submission at designated places and also placing GI sheets. Sqm 685.43 100.0 68543.0 NDSR-12 PVC pipe 160 mm upto 3.0 meter height: Providing and laying 160 mm dia 6 kg pressure PVC pipe for drainage all work complete including all fittings, fixtures, socket, bend etc. as per site requirement. The payment shall be made on running meter of length basis (The work will be executed upto 3.0 meter height). The work shall be carried out as per directed by Engineer in charge. The rates are including all height arrangements like scaffolding, sky lift etc. RMT 670.22 500.0 335110.0 NDSR-13 PVC pipe 160 mm above 3.0 meter height: Providing and laying 160 mm dia 6 kg pressure PVC pipe for drainage all work complete including all fittings, fixtures, socket, bend etc. as per site requirement using skylift of 20 mtr long boom including operators, all arrangements of safety, barricades, traffic marshal etc. all complete. The payment shall be made on running meter of length basis. The work shall be carried out as per directed by Engineer in charge. The rates are including all height arrangements like scaffolding, sky lift etc. RMT 775.26 500.0 387630.0 NDSR-14 Core cutting in member of RCC/Plain CC of all grades 200mm dia having depth up to 150mm deep. The rate shall be inclusive of all taxes, duties etc. and nothing shall be paid extra. Each 1394.34 25.0 34858.5 NDSR-15 PU Coating : Providing and applying poly urathene (PU) coating on concrete fioor at line 7 stations 1.Surface preparation : Mechanical cleaning of surface using wire brush as required to clean minor debris/dust/dirt from the surface including repair of concrete/base surface where-ever required.2.Epoxy primer: Application of high viscocity, solvent free fast curing epoxy primer by brush/roller covering the prepared surface.3.Top coat: Application of two componant polyurthane coating in 2 coat of min 75 microns each. Sqm 148.49 1200.0 178188.0 NDSR-16 Providing and fixing in position laminated toughened glass of 13.52 mm (6mm+1.52PVB+6mm)thickness at various location in ticket counter window of SCR door of EFO wall of EFO rooms including the cost of filling gap with clear/coloured sealent of approved make and brand etc. complete and as per site requirement ( make as per approved list ) Sqm 3158.06 100.0 315806.0 NDSR-17 Digital ultraviolet printing over glass/SS sandwhich panel/metal sheets/tiles etc. designed as desired and using original UV 8 color inks with 29 picolitre SPECTRA Galaxy print head or equivalent, Double deposition of ink, on fixed vacume table of size bigger than 2500 X 1500 for precision holding of glass/metal sheet etc. including the cost of transportation, loading and unloading etc. complete as per architectural drawing and direction of engineer in charge. Printing shall be smooth/textured face directed. Sqm 1103.9 50.0 55195.0 NDSR-18 Polishing and buffing of SS 304 railing/ SS surface provided in metro stations with minor grinding (as required) and removing stains/blemish with proper rubbing and polishing the surface with suitable material & finally buffing the surface with high speed buffing machine using buffing material as per direction of Engineer-in-charge. The work will be carried out in non-revenue hours and rates are inclusive of all taxes, man power, material, tools and plants, CO and OH etc. all complete. Sqm 188.54 2000.0 377080.0 NDSR-19 Supply of canter on hire charges basis, for carriage of any material from stations to DMRC depots. Each 1545.71 250.0 386427.5 NDSR-20 Providing and fixing of heavy duty Door closer with all necessary screws and fittings complete as directed by engineer in charge.(Make-as per approved list). Each 3026.36 100.0 302636.0 NDSR-21 Providing and fixing of Anti Birds Spikes made of high quality of Poly Carbonate, 5 Row 304mm. Rates are inclusive of screws, cable ties, adhesives, fasteners up to 5 meter Height complete as per direction of Engineer-in-Charge. Mtr 275.79 2500.0 689475.0 NDSR-22 Cubicles- Providing, fixing and installing toilet cubicals of make Menno Besco Titan 12 boxup cubicle 2100 mm with all SS accessories all complete as per direction of engineer-in-charge. The rates are inclusive of all SS fittings, nothing shall be paid extra. Each 28172.31 16.0 450756.96 NDSR-23 Retro reflective sheet : Providing and fixing of 2 mm thick SRBG/aluminium sheet cautionary retro reflective sheet on RCC pier with all T&P, staging, destaging fasteners, manpower, PPE's etc. all complete and as per direction of engineer in charge Sqm 4503.4 250.0 1125850.0 NDSR-24 Providing and fixing of floor spring for glass door (make Ozone, Dorma etc. up to 150 Kg capacity) complete as per direction of engineer in charge Each 5868.73 40.0 234749.2 NDSR-25 GI Sheet tray: Supplying,fabricating,fitting & fixing of GI sheet 18 SWG sheet tray fixing with dash fastner of 100x100 mm with the help of supporting MS flat clamp 50x4 mm and clamp will be fixed on beam by desh fastner Tray will be made/fabricated by the way of rivets NUt/bolts m-seal sealent throughly provided to make the join of tray perfect water proof, rate are inclusive of all tools and plants such as cutter welding set power hammer driller drilling machine etc scaffolding transportation of materials to the site of work and rate also inclusive of all skilled and unskilled labours. Work shall be carried out as per direction of Engineer. Rate are also inclusive of all lead lift ascent and descent etc. complete as per instruction of Engineer-In-Charge. Sqm 1125.72 50.0 56286.0 NDSR-26 Providing and fixing white vitreous chinaware water closet (European) with integral P or S trap size 100 mm including fittings and clamps and 32 mm CP brass flush valve etc. and black colour solid plastic seat etc. all complete as directed by engineer in charge (Make as per approved list). Each 6905.22 12.0 82862.64 NDSR-27 Providing and fixing Flushing Cistern (Make-Hindware) Cat. No. 21001 Each 2017.26 20.0 40345.2 NDSR-28 Providing and fixing Wash basin (Make-Hindware) Cat. No. 10017 Each 1745.7 20.0 34914.0 NDSR-29 Providing and fixing Angle Valve (Make-Jaquar) Code. FLR-5053N Each 698.29 60.0 41897.4 NDSR-30 Providing and fixing Bib Cock (Make-Jaquar) Code. FLR-5037N Each 737.08 20.0 14741.6 NDSR-31 Providing and fixing Pillar Cock (Make - Jaquar) Code: PRS-031 Each 1163.8 20.0 23276.0 NDSR-32 Providing and fixing PVC Connection (Make - Jaquar) Code: ALD-805 Each 193.97 60.0 11638.2 NDSR-33 Providing & fixing waste coupling (MAKE- Jaguar) Code ALD-705 Each 213.37 20.0 4267.4 NDSR-34 Providing and fixing Bottle Trap (Make - Jaquar) Code: ALD-769 Each 853.59 20.0 17071.8 NDSR-35 Providing and fixing full Uniral (Make - Hindware) Cat. no. 60010 Each 5431.08 12.0 65172.96 NDSR-36 Providing and fixing Indian WC (Make-Hindware) Cat.No.-20070 Each 1745.7 10.0 17457.0 NDSR-37 Providing and fixing 250 mm long stainless steel handle in toilet door with all necessary screws etc. complete. (dorma make) Per Pair 573.92 12.0 6887.04 NDSR-38 Providing and fixing stainless steel heavy duty magnetic flush door stopper. Each 82.9 20.0 1658.0 NDSR-39 Providing and fixing stainless steel vertical stopper for toilet doors. Each 101.24 10.0 1012.4 NDSR-40 Providing and fixing hand shower with waste pipe (make jaguar) Code : ALD-573 Each 940.15 50.0 47007.5 NDSR-41 Providing and fixing sensor (Make-Jaquar) model no. SNR 51083 Each 5595.1 20.0 111902.0 NDSR-42 Providing and fixing in position precast RCC bollard of size 950 mm (height ), 150 mm dia vibro compacted accuratly designed moulds appropriate reinforced with circular plastic space and concrete grade m - 25 as per approved design and drawing. The bollard shall be fixed on cement concrete block of mix 1:2:4 and pit size of 30X30X30 including earth work excavation etc. complete as per direction and instruction of engineer in charge. Each 486.31 800.0 389048.0 Total amount of Schedule-B (NDSR ITEMS) (Inclusive of GST@18%) 9993079.3 Total amount of Schedule-B (NDSR ITEMS) (Exclusive of GST) 8468711.27 Schedule-C (Manpower Items):- NDSR-43 Providing Plumber/fitter/mason/carpentor for plumbing/sewerage/ rectification/ carpentory/masonary work with all required T&P as per direction of Engineer-In-charge.The payment shall be made on attendance basis and reporting shall be made to Engineer-In-charge. Per Day 1456.36 250.0 364090.0 NDSR-44 Providing welder/fitter for welding works along with welding machine to carry out welding work in Line-7 as per direction of Engineer-In-charge including cost of consumable ,T&P etc (electrodes). The payment shal be made on attendance basis and reporting shall be made to engineer-In-Charge. Per Day 1456.36 200.0 291272.0 NDSR-45 Providing unskilled labours /helper/beldar as per direction of Engineer-In-charge with all tools and plants.The payment shall be made on attendance basis and reporting shall be made to Engineer-in-charge. Per Day 1210.74 1000.0 1210740.0 Total of Schedule -C (Manpower Items) (Inclusive of GST@18%) 1866102.0 Total of Schedule -C (Manpower Items) (Exclusive of GST) 1581442.37 Grand Total amount (Sch. A + Sch. B + Sch C.) (Inclusive of GST@18%) 71094969.58 |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender