Tender For Replacement Of Ac Sheet With Gi Profile Sheets At Fsd Quarsi, Do Aligarh
Tender Value
70.36 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
8 days left
EMD
1.40 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aligarh → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Ac Sheet With Gi Profile Sheets At Fsd Quarsi, Do Aligarh
BOQ
| Sl. No. | Item Description |
| 1 | Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 3 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) : From brick work in cement mortar |
| 4 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 5 | Dismantling roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead of Asbestos cement sheet |
| 6 | Brick work with old available bricks in super structure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes: In cement mortar 1:6 (1 cement : 6 coarse sand). |
| 8 | Providing and fixing colour coated GI profile sheets ROOFING(size, shape, colour and pitch by corrugation as approved by engineer in charge) 0.50 mm (+ -0.05%) total coated thickness (TCT) tollerance as per relevant IS Code ) with zinc coating 120 grams per sqm as per IS 277, yiel strength 240 MPa steel grade 5-7 micron epoxy primer on both sides of the sheet and polyester paint coating of 20-25 micron on exposed surface including primer. Sheet should have protective gaurd film of 25 microns minium to avoid scrathe during transportation and sheet should supplied in single length as desired by engineer in charge .The sheet shall be fixed using self drilling /self taping screws of of size (5.5X 55mm) with EPDM seal of standard make complete upto any pitch in horizontal/vertical or curved surfaces , excluding the cost of purlins, rafters and trussess and including cutting to size and shape wherever required. |
| 9 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : (i)Ridges plain (500 - 600mm) |
| 10 | Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand & manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. |
| 11 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. |
| 12 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10 mm and down gauge), includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep without chase cutting |
| 13 | 12 mm cement plaster of mix 1:6 (1 cement : 6 coarse sand ). |
| 14 | 15 mm cement plaster of mix 1:6 (1 cement : 6 coarse sand ). |
| 15 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 16 | Painting with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade : One or more coats on old work |
| 17 | Supply ,installation ,testing and commissioning of turbo ventilators size 22'' in stainlesssteel 430grade with approximate weight 4.85kg having a CFM-7KM per hours -2440 with blade lengh 360mm wings of 80 mm and following specification. |
| 18 | Credit for old unservicable GI sheets, eve gutters, valley gutters, wind ties, J hooks/ angle/ iron scrap received from dismantlling |
| 19 | Credit for dismantled old AC Sheet as and where basis including loading, unloading and transportation outside FCI premises- AC Sheet Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender