Tender For maintenance of Completed Scheme Under Nazul Account-Ii, Horticulture Zone.Sh: repair maintenance Of Aeration System In Water Body At Bhalswa Lake, And Annual, Repairing & Maintenance Of Pump Sets, Park & Lake Front Road Lighting, Panel Boa
Tender Value
25.81 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
2 days left
EMD
51621
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance of Completed Scheme Under Nazul Account-Ii, Horticulture Zone.Sh: repair maintenance Of Aeration System In Water Body At Bhalswa Lake, And Annual, Repairing & Maintenance Of Pump Sets, Park & Lake Front Road Lighting, Panel Board Accessories Etc. At Bhalswa Lake Park Of Hd-10 Under North Zone.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Aug-2026 | Corrigendum | Other | 17-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Repair, Maintenance & Operation (RMO) of Water Body Floating Aeration System, and Annual Maintenance of Pump Sets, Lighting, Panel Accessories etc. as per attached Inventory and Terms & Conditions. |
| 2 | Repairing and Rewinding of 3-Phase Open Well type Dewatering/Sewage Mono-Block Submersible Pump Set (5-7.5 HP) including dismantling, Lifting of Pump Set from Water Body, cartage (to & fro), reassembling after repair, Replacement of all damaged parts (bearing, bush, seals, etc.), electrical connections, testing, painting & making good for return to serviceability complete as required as per direction of Engineer-in-Charge. |
| 3 | Repairing & Rewinding of Submersible Motors of following capacity including cartage (to & fro), dismantling, rewinding with Class-F copper wire, reassembling, supply & replacement of all damaged parts (mechanical seals, bearings, O-rings, cable gland, etc.), and making good for operation. Works also include Electrical connections, testing, painting, and complete as required for return to serviceability. Up to 2 Hp, 1-Ph/3-Ph Submersible Motors |
| 4 | 3 Hp to 5 Hp, 3-Ph Submersible Motors |
| 5 | Repairing of Submersible Pump Set of the following Stages & dia. including cartage (to & fro), dismantling, reassembling, supply & replacement/repairing of all damaged parts of Pump Set, and making good for operation i/c testing, painting etc. complete as required.4\\"dia. Submersible Pump Set up to all Stages |
| 6 | Lifting Out of Sewage Submersible Pump Set from the Existing Bore well up to the required depth along with existing GI Pipes and accessories etc. including disconnecting of GI Pipe & Submersible Cable etc. complete as required. |
| 7 | Lowering and Commissioning of Submersible Pump Set in the Existing Bore well up to the required depth along with Replaced (if required)/Existing GI Pipe & Submersible Cable etc., Clamping (at appropriate distance), Water Proof Jointing of Submersible Cable. Replacement of required nuts, bolts, washers and packing, nipple, reducer, connection, testing etc. complete as required. |
| 8 | Supplying and Replacement of following size Double Flanged of \\"B\\" Class GI Pipe conforming to IS:1239 including welding and all fittings (elbows, tees, flanges, reducers/tapers), nuts, bolts, gaskets, painting and accessories etc. complete as required including rebate for dismantle material. 40 mm dia. |
| 9 | Supplying & Replacement of PVC Insulated PVC Sheathed Copper Conductor Submersible Flat Cable ISI marked in Existing Metal/HDPE/PVC/Pipe/in Bore well/in Sump including Fixing the Cable to GI/HDPE Pipe with suitable Cable tags of following sizes etc. complete as required including rebate for dismantle material.3 Core 2.5 Sq mm Flat Cable |
| 10 | 3 Core 6 Sq mm Flat Cable |
| 11 | Supplying and Replacement of following Control Gear/accessories in the Existing Installation for Electric Panel Board/Feeder Pillar, Motor Starter complete in all respect including connections with appropriate size FRLS, PVC Insulated Copper conductor single core cable and earthing etc. as required including rebate for dismantle Fixture.6 A to 32 A ratings, TPN MCB, “C” curve, 10 KA breaking capacity. |
| 12 | 6 A to 32 A ratings, TP MCB, “C” curve, 10 KA breaking capacity. |
| 13 | 63 A, FP MCB, “C” curve, 10 KA breaking capacity |
| 14 | 100 A, 30 KA, 4-Pole MCCB |
| 15 | 250 A, 36 KA, 4-Pole MCCB |
| 16 | 6 A to 32 A ratings, DP MCB, “C” curve, 10 KA breaking capacity. |
| 17 | 3-Phase DOL MK1 Starter suitable up to 7.5 HP Pump Set with Relay Range 13 to 22 Amp. |
| 18 | Single Phase Submersible Pump Controller (MR-G2) up to 3 Hp with Relay Range 13 to 22 Amp, Start Capacitor 275 V, 50 Hz (200/250), Run Capacitor 440 V, 50 Hz MFD (2 x 50), Ammeter & Voltmeter. |
| 19 | 3-Phase Submersible Pump Controller (MU-G7.5 DOL) with Single Phase Preventer up to 7.5 Hp Pump Set, Relay Range 13 to 21 Amp. |
| 20 | Single Phasing Preventer (VSP2- Auto Reset, 40 Volts Unbalance) mounted on Panel Wall. |
| 21 | Electronic/Analogue Timer of model FM1/Quartz Daily 110 VAC-240 VAC Base/DIN Mounting in the existing Panel. |
| 22 | 3-Pole Power Contactor of AC3 Rating 32 Amp, MNX 32 type. |
| 23 | Supplying and Replacement of Street Light LED Fixture Powder Coated Pressure Die Cast Aluminum body with driver as per the requirement with Driver Efficiency>85%, Input voltage: 140-270 Volt AC, Frequency 50/60 Hz, Operating Temp range-5°C to 50°C, Internal Surge Protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency>85%, THD<10% as per IEC 61000-3-2 , PF≥0.95, IP- 66, IK-10, CRI>70, Under Voltage and Over Voltage Protection, EMI-EMC As per CISPR 15, Lenses for Beam Angle as per IESNA type I/II/III as per the width of the road and the project requirement, suitable to fit in up to 65 mm dia. pipe, life time (LED, Driver & Electrical Circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K/4000°K/5700°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching)<5, Maximum Power Consumption should not more than the specified rating and Fixture shall be of relevant BIS Standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC Insulated Copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System Lumen Efficacy≥120<135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED Fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal Management: Heat Sink of Aluminum Housing such that LED Junction Temperature shall not rise above 90°C) including rebate for dismantle Fixture.72 Watt |
| 24 | Supplying and Replacement of Flood Light, Powder Coated Pressure Die Cast Aluminum body with built in or separate driver as per the requirement with Driver Efficiency>85%, Input voltage: 140-270 Volt AC, Frequency 50/60 Hz, Operating Temp range-5°C to 50°C, Internal Surge Protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency>85%, THD<10% as per IEC 61000-3-2 , PF≥0.95, IP-66, IK-10, CRI>70, Under Voltage and Over Voltage Protection, EMI-EMC As per CISPR-15, Lenses for Beam Angle 30°-120° as per the application and the project requirement, suitable tilt able Fitting, life time (LED, Driver & Electrical Circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K/4000°K/5700°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching)<5, Maximum Power Consumption should not more than the specified rating and Fixture shall be of relevant BIS Standard complete in all respect i/c connections with 1.5 sq mm FRLS/HFFR, PVC Insulated Copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System Lumen Efficacy≥120<135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED Fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal Management: Heat Sink of Aluminum Housing such that LED Junction Temperature shall not rise above 90°C) including rebate for dismantle Fixture.100 Watt |
| 25 | Supplying and Drawing of following sizes FRLS PVC Insulated Copper Conductor, Single Core Cable in the Existing Surface/Recess Steel/PVC Conduit as required including rebate for dismantle material.3C x 1.5 sq.mm |
| 26 | 3C x 2.5 sq. mm |
| 27 | Supplying of following sizes of XLPE (Cross Linked Poly Ethylene) Insulated PVC Sheathed Alumimium Conductor Armoured Power Cable of 1.1 KV grade including connection, testing etc. as required including rebate for dismantle material.2C x 16 sq. mm |
| 28 | 4C x 25 sq. mm |
| 29 | Laying of one number PVC Insulated and PVC Sheathed/XLPE Power Cable of 1.1 KV grade of following size in the Existing RCC/HUME/METAL Pipe as required.Up to 35 sq. mm |
| 30 | Laying of one number PVC Insulated and PVC Sheathed/XLPE Power Cable of 1.1 KV grade of following size Direct-In-Ground including Excavation and Refilling the Trench etc. as required, but Excluding Sand Cushioning and Protective Covering.Up to 35 sq. mm |
| 31 | Providing and Fixing 6 SWG dia. GI wire on surface or in recess for loop earthing along with existing surface/recessed conduit/sub-main wiring/cable as required. |
| 32 | Supplying and Laying of following size DWC HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS: 14930, Part-II complete with fitting and cutting, jointing etc. direct-in-ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.63 mm dia. (OD-63 mm & ID-51 mm nominal) |
| 33 | Supplying and making straight through joint with Heat Shrinkable Kit including ferrules and other jointing materials for following size of PVC Insulated and PVC Sheathed/XLPE Aluminium Conductor Cable of 1.1 KV grade as required.2C x 16 sq. mm |
| 34 | 4C x 25 sq. mm |
| 35 | Supply and Replacement of Pole Connector Box made out of Glass Reinforced Polyester Sheet Moulding Compound Conforming to IS:13410-1992 Grade-S1 of Outside Dimensions 280 mm (H) x 170 mm (W) x 115 mm (D) (all the corners of the box should be round & not pointed ones) suitable to mount on 40/50/65/80 mm dia. GI Pole with the following Provisions/Accessories Mounting in Box etc. complete as required including rebate for dismantle material.a) 2 Nos. Clamps made out of 19 mm x 3 mm MS Strip of suitable Length for Mounting Box on the Pole.b) Water Tight Front Cover with 2 Nos. Stainless Steel Hinges & 1 No. Screw for Tightening.c) 4-Way, 220 V, 30 A, Dough Moulded Connector with SMC with Stainless Steel Inserts- 1 No.d) 16 A, Moulded SMC Rewireable Kit-Kat- 1 No.e) Suitable size Hole at suitable Location on Rear Wall for Cable & Wire Entry in the Connector Box.f) Earthing Bolt M6 x 20 mm.g) Neutral Link- 1 No. |
| 36 | Supplying and Replacement of Sewage Treated Water Submersible Pump Set, duly coupled with suitable rating 1-Phase, 220-415 Volts, 50 Hz, 3000 RPM Submersible Motor, including Providing and Fixing of 6 meter long GI Chain of suitable strength for lifting the Pump Set from the UGR/Chamber/Pit etc. complete as required including rebate for dismantle Pump Set. The Pump Set shall be suitable for the following duties:a) Capacity: 2 Hp/1.50 KW (minimum)b) Discharge: 15-600 LPMc) Head Range: 5-15 Meter or 16-49 ftd) Solid Handling Capacity: 35 mme) Outlet Pipe Size: 50 mmf) Suitable Size Cable: 10 Meter (minimum) |
| 37 | Supplying and Temporary Erection of wrapped timber/balli/bamboo support of suitable size and strength, up to 15 ft overall height, embedded 3 ft into the ground, including vertical alignment and bracing as required; temporary mounting of existing 100 W Flood Light on the erected support with Supply and Fixing of all necessary accessories such as clamps, nuts-bolts, and rassi (binding rope) to ensure safe and secure fixation; complete in all respects for temporary use as directed by the Engineer-in-Charge and/or AE(E)-in-Charge. |
| 38 | Earthing with GI Earth Pipe 4.5 meter long, 40 mm dia. including accessories, and Providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 39 | Providing and Fixing 25 mm x 5 mm GI Strip on surface or in recess for connection etc. as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender