Tender For Providing, Laying And Jointing Hdpe Pipe Line In Milkipura Ward 19.
Tender Value
36.47 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
29 days left
EMD
50000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ujjain → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing, Laying And Jointing Hdpe Pipe Line In Milkipura Ward 19.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation for pipe trench in all kinds of soil in areas including dressing, water-ringa and raming and disposal of excavation earth lead up to 50 meter sand lift u to 1.5 m, disposal earth to be leveled neatly dressed. All kinds of ordinary soil. 18.2.1/227 |
| 2 | 160 MM DIA |
| 3 | 110 mm dia |
| 4 | Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) 7.1.12 p.n 103 |
| 5 | 160 mm dia 6 kg /sqcm |
| 6 | 110 mm dia 6 kg /sqcm |
| 7 | Providing & fixing of following Ductile iron doubleflanged sluice valves as per IS:14846- 2000 fitted withcap including jointing & testing with cost of jointingmaterial such as bolts, nuts, rubber insertions etc. allcomplete I.no. 14.7 p.no.176Non Rising Spindle (CLASS PN- 1.6) |
| 8 | 250 mm dia |
| 9 | 150 mm dia |
| 10 | 100 mm dia |
| 11 | Providing and laying Pipe end confirming to IS specifications. 8kg/sq.cm i.no. 7.5 p.no. 106 |
| 12 | 160mm dia |
| 13 | 110 mm dia |
| 14 | Providing and laying Bend 90 confirming to IS specifications 8 kg/sq.cm I.no. 7.2 p.no.104 |
| 15 | 160mm dia |
| 16 | 110 mm dia |
| 17 | Providing and laying Bend 45ْ confirming to IS specifications. 8 kg/sq.cm I.no. 7.3 p.no.104 |
| 18 | 160mm dia |
| 19 | 110 mm dia |
| 20 | Providing and laying Equal Tee confirming to IS specifications. 8 kg/sq.cm I.no. 7.5 p.no.106 |
| 21 | 160mm dia |
| 22 | 110 mm dia |
| 23 | Providing and laying Reducer 8kg/sq.cm: confirming to IS specifications I.no. 7.7 p.no.107 step 1 |
| 24 | 250 mm dia |
| 25 | 160mm dia |
| 26 | 110 mm dia |
| 27 | Providing and laying End Cap confirming to IS specifications.8 kg I.no. 7.10 p.no.109 |
| 28 | 250mm dia |
| 29 | 160mm dia |
| 30 | 110 mm dia |
| 31 | Providing, Supplying and fixing of Electro Fusion Fittings in accordance with BSEN 12201 : Part-3 suitable for drinking water within black/blue colour manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR11 with min PN12.5 rated for water application. The cost such as testing, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. all complete. I.no. 7.16 p.no.114 |
| 32 | Electro Fusion Coupler250 mm dia |
| 33 | Electro Fusion Coupler160mm dia |
| 34 | Electro Fusion Coupler110 mm dia |
| 35 | Electro Fusion Equal Tee250 mm dia |
| 36 | Electro Fusion Equal Tee160mm dia |
| 37 | Electro Fusion Equal Tee110 mm dia |
| 38 | Electro Fusion Elbow 90 Deg 250 mm dia |
| 39 | Electro Fusion Elbow 90 Deg160mm dia |
| 40 | Electro Fusion Elbow 90 Deg110 mm dia |
| 41 | Electro Fusion Reducer 250x200mm |
| 42 | Electro Fusion Reducer 200x160mm |
| 43 | Electro Fusion Reducer 160x110mm |
| 44 | Providing & fixing cast iron double airvalves, flanged within built isolating valve as per IS:14845-2000 including jointing & testing with cos tof jointing material and rubber insertion all complete 200 mm dia pn-1.0. i.no. 14.41.5 p.no. 187 |
| 45 | Filling with moorum for pipe bedding or over the pipe including supply of moorum/sand i.no. 18.3.3 p.no. 228 |
| 46 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50meters lead as per direction of Engineer-in-charge. Usor i.no.18.5.1 p.no.228 |
| 47 | Providingand laying in position Plain cement concrete (PCC) of specified grade excluding the cost of centering and shuttering. Cemen tconcrete grade M-20 (NominalMix) with 20mm maximum size of stone aggregate Usor i.no.18.5.1 p.no.228 |
| 48 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. I.no. 4.1.7/ 32Vol. IICement concrete grade M-7.5 (Nominal Mix) with 40 mm maximum size of stone aggregate. For foundation of chember (1.9x1.9x1.9m) |
| 49 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate. (1.9x1.9x1.9m) 5.1.1 /46 Vol. II |
| 50 | Brick work will well burnt open bhatta bricks crushing strength not less than 25kg/cm² and water absoption not more than 20% in foundation and plinth In cm 1:6. 6.8/56 Vol. IIBrickwork for Chamber (1.9x1.9x1.9m) |
| 51 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 13.4.1/160 Vol. II1:3 (1 cement: 3 fine sand) |
| 52 | Providing & fixing of ISI marked pre cast reinforced cement concrete manhole cover including frame and transporting at site, cost of all material etc. I.no. 17.23.14/220560 x 900 mm size extra heavy duty |
| 53 | Providing and making Consumer Service connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass ferrule (Not less than 100 gm in eight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE unions 20mm dia/GI union 15 mm dia (medium class), brass/ss tap etc. all complete and all Rates also include excavation,cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5 :3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer),construction of Platform and grouting of circular post neat and finished as per the drawing attached,testing all complete items. For connection with 20mm dia MDPE Pipe upto 5 meter and CONCRETE ROAD CROSSING is necessary . PHE, SOR 9.37/150 |
| 54 | Manufacturing and supply of specials made out of M.S. steel plate or HR coil conforming to IS3589-2001or its latest revision / amendment, 5mm to 6mm thick plate inshapes and sizes required as per site conditions including cost of steel plate & other electrical & mechanical material, including Submerged Arcwelded,including cost of transportation, loading and unloading complete approved by Engineer-in-Charge. (This is applicable only when standard special are not available). 19.8/241 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 29 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 33 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender