Tender for Tender for Construction Of Gaurd Chowki At Bhekhda Van Naka Udainiwas Range Udaipur (East)
Tender Value
9.89 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
0 days left
EMD
19780
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udaipur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Gaurd Chowki At Bhekhda Van Naka Udainiwas Range Udaipur (East)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : Ordinary Rock |
| 2 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth Level: M-10 grade Nominal Mix ( with graded stone aggregate 20mm nomial size ) |
| 3 | Random rubble Stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in : cement mortar 1:6 (1 cement : 6 coarse sand) |
| 4 | Add extra over item no. 5.1 for Brick work in super structure upto third storey using brick of class designation 75 in :cement mortar 1:6 (1 cement : 6 coarse sand) |
| 5 | Brick work in partition in super structure upto third storey 7 cm thick ( bick on edge ) using brick of class designation 75 in : cement mortar 1:4 (1 cement : 4 coarse sand) |
| 6 | Random rubble dry stone Kharanja under floor. |
| 7 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth Level:M-15 grade Nominal Mix ( with graded stone aggregate 20mm nomial size ) |
| 8 | Centering and shuttering with steel plates including strutting propping, barcing both ways with woodens members and removal of form work upto floor three level for:Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks,sills, chhajjas, lintel, beam, plinth beam etc. |
| 9 | providing and laying in position specified grade of cement concrete for RCC structure elements upto floor three level including curing compaction etc. complete in retaining walls,returnwall, Wall ( any thickness ) including attached pilasters , column,piers, abutments,,pillers, posts,buttresses string Course ,parapet coping bed plates, anchor blockes,sills, fillets up to floor three level excluding the cost of centreing and shuttering :M 20 grade mix |
| 10 | Providing and fabricating reinforcement for RCC work including straightening , cutting, bending, placing in position in binding (including cost of binding wire) all complete up to floor three level : Thermo mechanically treated bars (IS:1786) as per item R.C.C. |
| 11 | Supplying and fixing machine cut fine dressed Red/Pink sand stone dasa or coping, with full moulding if required laid on cement mortar 1:4 including pointing with admixture of pigment matching with the stone shade:25 mm thick |
| 12 | Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges :Sand or other approved stone 25mm thick. |
| 13 | Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4):Size 300mm x 450mm |
| 14 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed |
| 15 | Polished Blue Kota stone flooring skirthing laid over 20mm thick base of CM 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab from 2001sqm to 5000 sqm,25 mm thick slab |
| 16 | P/ F M.S. sheet Single leaf door shutter in angle iron frame 35X35X5 mm suitabilly daigonally bracked with 25X3 mm flat iron above and below lock rail of size 50X5 mm beading extra including all fitting as per direction of engineer-in- charge but excluding cpst of chowkhats inculding twocoats of anti-corrosive red oxide primer paints. M.S. Sheet 20 S.W.G. |
| 17 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required. |
| 18 | Window side Hung ( openable ) |
| 19 | Ventilators top Hung ( openable ) |
| 20 | Supplying & fixing fixed wige gauge of 14 mesh X 24 gauge to the metal frame of rolled section by metal beading 20X3 mm with suitable screw at not exceeding 150mm distance . |
| 21 | Providing and fixing Square bars or other flat welded to window, ventilatiors etc. Square bar size 10 mm, Wt. per metre 0.785 Kg /m= 53.10 X 0.785 |
| 22 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Frame size 40X40X6 mm Wt. per metre 3.50 Kg /m=31.50 X 3.5 |
| 23 | Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etc complete fine finish : 20 mm thick |
| 24 | Finishing walls with Acrylic Smooth exterior paint of required |
| 25 | Wall painting with plastic emulsion paint of approved brandand manufacture to give an even shade including allscaffolding:Two or more coats on new work including prepration of base with primer Putty lippy complete in all respect. |
| 26 | Painting with emamel paint of approved brand and manufacture and to give an even shade . Two or more coats on New work |
| 27 | Filling available excavated earth ( excluding rock) in trenches plinth side of foundation etc. in layer not exceeding 20 cm in depth consolidation each deposited layer by ramming and watering including lead upto 50 mts and with all lift. |
| 28 | P & F European type white glazed vitreous china 1st quality Double syphonic W.C (IS :2556 Mark) with P or S trap including cutting and making good the wall and floor |
| 29 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.Flat Back (large) or half stall size 610x400x80mm |
| 30 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall Size 550 mm x 400 mm dia for counter top |
| 31 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: |
| 32 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. |
| 33 | A. 75 mm dia |
| 34 | B. 110 mm dia |
| 35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 15 mm nominalsize |
| 36 | Providing and fixing Superior quality CP Brass fittings ofapproved make as per direction of Engineer-in-charge Pillar Cock 15 mm nominal size |
| 37 | Concealed stop cock 15 mm nominal size |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 25 mm nominal size |
| 39 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked ( IS:9537 P - II ) rigid steel conduit & it's ISI marked (IS:14768 P-II 2003) accessories, round tiles,Hot Dipped Galvanized Modular Box of 1.2 mm thick with earth terminal, 10A Modular switch,3 pin ceiling rose / holder / 3 way connector ,Modular face plate with grid plate, pvc bushes, check nuts, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E- 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 40 | A. Short point (up to 3 mtr.) |
| 41 | B. Medium point (up to 6 mtr.) |
| 42 | C.Large point (up to 10 mtr.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender