Tender For Strengthening Of W/S (Re-Boring Of 05 Nos. Of Tubewells At Network Sector-32, 33, 34, 35 & Village Morna), Noida.
Tender Value
1.07 Crore
Estimated cost
Bid Submission
25 Aug 2026
2 days left
EMD
2.54 Lakhs
Bank guarantee accepted
Document Fee
5310
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Strengthening Of W/S (Re-Boring Of 05 Nos. Of Tubewells At Network Sector-32, 33, 34, 35 & Village Morna), Noida.
BOQ
| Sl. No. | Item Description |
| 1 | Boring/Drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS : 2800 (part I), including collecting samples from different starta, preparing and submitting starta chart/bore log, including hire & running charges of all equipmens, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 mtr. depth below ground level. Rocky starta including Boulders. a) 600 mm dia Rate for 0 to 60 meter depth. |
| 2 | b) 600 mm dia Rate for 60 to 90 meter depth. |
| 3 | c) 600 mm dia Rate for 90 to 120 meter depth. |
| 4 | Making of auxilliary well for water supply for drilling purpose water etc. refilling the same after proper completion of work. |
| 5 | Supply and lowering 7mm thick screwed and socketted MS ERW Slotted pipe 300mm dia of heavy class. |
| 6 | Electric Resistance Welded (ERW) Stainless Steel Cage Type V wire woulded screen shall be of continuous trapezoidal wire spirlly would around fabricated cage. The screen must cosist 'V' shaped (wedge) profile wire of various dismensions resistance welded to acylindrical body made of number of longitudinal special high tensile support rods to provide smooth unrestricted bore which are in turn welded into cyclinderical ring coupling at either end as per IS :8110-2000 with latest amendments and materials specification as per AISI (American iron and steel Inst.) Type 304 Grade SS-304. with Stainless Steel socket of 300 mm dia pipe. (Johnson make stainless steel of apollo make). |
| 7 | Supply and lowering 350 mm dia 8mm wall thick MS housing pipe with screwed & socketed & male and female threads for joints etc.complete. |
| 8 | Supply & shrounding the annular space between Tube Well bore and assembly with 2mm to 5mm thick Pea gravel. |
| 9 | Supply reducer 350 mm x 300 mm dia made out of 8.0 mm thick MS sheet. |
| 10 | Supply of well CAP suitable for 350mm dia housing pipe of 8 mm dia. |
| 11 | Supply bail plug suitable for 300mm dia MS pipes. |
| 12 | Development of tubewell by air compressor/over pumping unit. The capacity of compressor should be such depresed water level 10 Mtr. or as may be approved by the E/I so as to get average Yield of about 6000 LPM and making water reasonable sand free i/c 10 parts/million of water in colume within 15 minutes. The period of development by air compressor may be 60 hrs. may be stop earlier if required by the E/I or development of well. |
| 13 | S/F of M.S. specials such as Tee, Bend, Collars, Tapers, Gap Pieces, including flage ends as required, painting, cutting, welding as per site requirement of MS pipe thickness etc. complete in all respect as per direction of E/I. |
| 14 | Steel work welded in built up sections/ framed work, including hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 15 | P/F Sluice Valve Shall generally conform to IS 14846 with latest amendment, with length over flanges as per PD of IS 14846 corrensponding to BS EN-558/ ISO 5752 Basic Series 3 in CI Construciton having metal seating (IS 318 Gr. LTB 2). with complete Component & Material of construction following below:- 1. Body/Door/Dome -Cast Iron IS 210 Gr. FG 260 2. Spindle- Non rising ; Stainless Steel AISI 410 3. Body Seat/Door Face - Gun Metal : IS 318 Gr. LTB 2 (rings to be press fitted and riveted; no screws allowed) 4. Rivets - Soft annealed brass 5. Spindle Nut - Gun Metal : IS 318 Gr. LTB 2 6. Stem Seal - Greased Hemp 7. Fasteners - Carbon Steel 8. Flange Drilling - IS 1538 Table 4 & 6 9. PN 1.0 10. Accessories (400 mm and above) - Ball thrust bearing to be housed above the wet chamber ie. above the gland. Enclosed Spur Gear Box for ease of operation. Air Plug 11. Painting/Coating - Inside & Outside epoxy liquid coated; DFT minimum 250 micron, shade RAL 5005/5015 (BLUE) 12. Hydro-test - (Open Ended Only) Seat: 10/16 Kg/cm²; Body 15/24 Kg/cm² 13. Upto 600 mm dia Manual Operated & above 600 mm Gear Box Make-Indian Valve Pvt. Ltd. (IVC)/Kirloskar Brothers Limited (KIRLOSKAR) 150 mm dia. |
| 16 | P/F Reflex Valve upto 600 mm dia shall conform to IS 5312 Part 1 & above to IS 5312 Part-2 with latest amendment, Valves shall be in graded CI with metal to metal (IS 318 Gr. LTB 2) seating, preferably slanted (and not perpendicular) vis-à-vis horizontal axis; SS AISI 410 stub pins & slant seat design with complete Component & Material of construction following below:- 1. Body/Door/Dome - Cast Iron IS 210 Gr. FG 260 2. Hinge pin (single door)/stub pin (multidoor type) - SS AISI 410 3. Seat & Face rings -Gun metal : IS 318 Gr. LTB 2 4. Rivets - Soft annealed brass 5. Fasteners - Carbon Steel 6. Flange Drilling - IS 1538 Table 4 7. PN - 1.0 8. By - pass arrangement - Optional 9. Painting/Coating Inside & Outside epoxy liquid coated : DFT minimum 250 micron, shade RAL 5005/5015 (Blue) 10. Hydro-test Seat : 10/16 Kg/cm2; Body : 15/24 Kg/cm2 MAKE -India Valve Pvt. Ltd. (IVC)/ Kirloskar Brothers Limited (KIRLOSKAR) 150 mm dia Kirloskar MAKE.\ |
| 17 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 10.0 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (AOR) (1 cement : 4 coarse sand). |
| 18 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) |
| 19 | Hire Charge of Generator (Including cost Service of operating staff, supply of lubricating oil and diesel also) D.G. Set/Generator 63 KVA. |
| 20 | Hiring of Gas cutting set with oxygen and LPG Running time @ 6 Hrs/Day (Including Service cost of operating staff, supply of necessory items as oxygen & LPG etc). |
| 21 | Hiring of Welding Set Running Time @ 6 Hrs/Day (Including Service cost of operating staff, supply of suitable electrodes etc). |
| 22 | Dewatering pump 10 HP. |
| 23 | S/L of Al. conductor PVC insulated armoured served, sheathed cable 1100 V grate at a depth of below ground level over a cushion of 75mm below ground level over a cushion of 75mm thick sand alround protected with burnt brick on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by E/I complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 70 sqmm 3½ core. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender