Tender For Equipment And Machinery (Two Years Annual Repairing Of Sewer Cleaning Machines In Jal Division-I, Sector-05) Noida.
Tender Value
41.09 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
5 days left
EMD
96300
Bank guarantee accepted
Document Fee
2124
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Equipment And Machinery (Two Years Annual Repairing Of Sewer Cleaning Machines In Jal Division-I, Sector-05) Noida.
BOQ
| Sl. No. | Item Description |
| 1 | S/E Testing & Commissioning of 250 KVA Copper wound Dry type (Cast Resin) Transformeras per ISS. Complete in all respects Make : P.M./Kanohar/LD Power/Paramix as per direction of E/I (UPERC 2019) |
| 2 | S/E Testing & Commissioning of 400 KVA Copper wound Dry type (Cast Resin) Transformeras per ISS. Complete in all respects Make : P.M./Kanohar/LD Power/Paramix as per direction of E/I (UPERC 2019) |
| 3 | S/E Testing & Commissioning of 63 KVA Copper wound Outer TypeTransformeras per ISS. Complete in all respects Make : P.M./Kanohar/LD Power/Paramix as per direction of E/I (UPERC 2019) |
| 4 | Supply & fixing of 12.5 mtr Highmast shaft of approved makewith rising system hot dipglavanized inside & out side dip, heaving pole sheet thickness 3 mm. Top diaminium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part &having no circumferential weld, with accessories forhigh mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plateset ccomplete in all respect as per direction of E/I. UPPWD- 2018, PS-651 Make:- Bajaj/ GE/Philips/Valmont/Transrai |
| 5 | S/L of 3 core standered aluminium conductor XLPE (cross linked polythene) insulated PVC bedded, Galvanised flat steel strip aroured cable confirming to IS : 7098 (Part-II with latest amendmrnts) 11 KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand alround and protected with well burnt bricks on sides and on top put across. The armourning of cable shall be properly connected with earth conductor by clamps etc. 120 sqmm 3 core |
| 6 | 95 sqmm 3 core |
| 7 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 65 and above Protection complete in all respect. CAT- AAA (PS 1423) |
| 8 | Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. |
| 9 | S/L of AI. Conductor PVC insulated armoured served sheathed cable 1100 volt grade at a depth of below ground level over a cushion of 75 mm below ground level over a cushion of 75 mm thick sand alround protected with burnt brick on sides and on top. on surface thick sand alround protected with burnt bricks on sides and on top surface the cable shall be fixed on MS clamps etc. of suitable size or as directed by E/I complete in all respect the armouring of the cable shall be properly connected with the earth conductor by clamps etc. (PS -501) |
| 10 | 16 Sqmm 2 Core |
| 11 | 50 Sqmm 3 *1/2 Core |
| 12 | 400 sqmm 3½ core |
| 13 | 300 sqmm 3½ core |
| 14 | 120 sqmm 3½ core |
| 15 | S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tap and making connection etc. complete in all respect as per direction of E/I. (PS. No.-504) |
| 16 | 16 Sqmm |
| 17 | 35 Sqmm |
| 18 | 50 Sqmm |
| 19 | 120 Sqmm |
| 20 | 300 Sqmm |
| 21 | 400 Sqmm |
| 22 | S/F of Copper cable 2.5mm X 3 core complete in all respect. |
| 23 | S/F of Sintex junction box no. II GSSIB2817 of size 240x130x110 mm |
| 24 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect(d) (ii) 15A TPN Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender