Tender For Repair Works To Internal And External Finishes Including Flooring, Tiling, Joinery And Plastering In Md Accn, Otm Accn(North Zone) And Mes Colony At installation Dronacharya Under Ge Fort Kochi
Tender Value
15.75 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
8 days left
EMD
31500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Works To Internal And External Finishes Including Flooring, Tiling, Joinery And Plastering In Md Accn, Otm Accn(North Zone) And Mes Colony At installation Dronacharya Under Ge Fort Kochi
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and as directed. |
| 2 | Material and labour for light shade vitrified ceramic tiles 7-8 mm thick polished area of each tiles not exc 0.36 sqm but not exc 0.42 sqm, of any shade and any pattern (Pattern consists combination of two or more tiles) as in floor etc jointed in neat cement slurry and pointed in coloured cement to match colour tiles over and including 15mm thick screed bed in cement mortar 1:6 and pointed in coloured cement to match coloured tiles, complete all as specified and as directed. Notes: - 1) The Colour, shade and pattern shall be approved by the GE during execution work. 2) No extra cost shall be allowed for removing and re-fixing and necessary cutting of door etc if any required during execution of work. |
| 3 | Material and labour for Non-skid coloured ceramic tiles of any shade and any pattern of six (Pattern consists combination of two or more tiles) exceeding 0.06 sqm but not exceeding 0.11 sqm 7 to 8-10mm thick, over and including 15mm thick screed bed in cement mortar 1:6 as in floors etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and as directed. Notes: - 1) The Colour, shade and pattern shall be approved by the GE during execution work. 2) No extra cost shall be allowed for removing and re-fixing and necessary cutting of door etc if any required during execution of work. |
| 4 | Material and labour for glazed ceramic Coloured tiles in vertical surface 450x350x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed. |
| 5 | Dismantling of stone slabs and granite laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or platform etc complete all as specified and as directed. |
| 6 | Material and labour for Granite 18 mm thick of any type work (table rubbed and polished) in steps, treads jambs, pillars, window- cills, cooking platforms, other platforms and like in over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified including pointing in white cement or colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite (including moulding etc.) and rounding and moulding etc complete all as specified and as directed. |
| 7 | Taking down chowkats/ frame without taking off shutter from the frame not exc 1.50 Sqm each including complete accessories of any type complete all as specified and as directed. |
| 8 | Taking down chowkats/ frame without taking off shutter from the frame exc 1.50 Sqm and not exc 4 Sqm each including complete accessories of any type complete all as specified and as directed. |
| 9 | Supply and fix powder coated aluminium frame for doors/ windows/ ventilators minimum thickness of powder coating is 50 microns with one or more rebates etc as in windows/ ventilators including necessary joining cleat, glazing clips, rubber neoprene packing, complete all as specified and as directed.Note: - Glass shall be paid separately under relevant items. |
| 10 | Supply and fix powder coated aluminium window and ventilator shutters door shutter, side hung type without sash bars aluminium section of weighing 0.55 kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, handle 2 Nos in doors, hinges 01 No per shutter of windows, snap beading etc complete all as specified and as directed. Note: - Glass shall be paid separately under relevant items. |
| 11 | Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos and 03 nos of hinges in each door, hinges, powder coated aluminum snap beading screws etc. complete all as specified and as directed. |
| 12 | Supply and fixing in repairs pre-laminated particle board 18/19 mm thick, interior grade, pre-laminated both sides with decorative choice lamination fixed with rubber beading and suitable adhesive as in aluminium door shutter etc complete all as specified and as directed. |
| 13 | Supply and fix 35mm thick Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid decorative type flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal strength of 1800 N (Face)& 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 14 | Supply and fix Factory made single extruded WPC (Wood Polymer Composite) solid door Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with lugs/SS dash fasteners of required dia and length complete all as specified and as directed. |
| 15 | Supply and fix 4.80 mm thick sheet tinted glass ordinary quality and glazing with aluminium clip square exc 0.5 sqm in each pane, complete all as specified and as directed. |
| 16 | Supply and fixing in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed. |
| 17 | Taking down shutter of any description, not exc 1Sqm each and removing from site complete all as specified and as directed. |
| 18 | Taking down shutter of any description, exc. 1 sqm and not exceeding 2 sqm each and removing from site complete all as specified and as directed. |
| 19 | Supply and fix second class hard wood 'teak' plain solid straight chowkhats and frames wrought framed rebated on chamfered put together with glue pinned at joints etc complete, complete all as specified and as directed. |
| 20 | Supply and fix 30 mm thick second-class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted complete, all as specified and as directed. |
| 21 | Supply and fix 35 mm thick second-class class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. as per section 8.28 (a) sizes of members of shutters complete all as specified and as directed. |
| 22 | Taking down PVC/FRP door shutter of any description with frame not exc 2 Sqm each, complete all as specified and as directed. |
| 23 | Supply and fix Solid PVC Door Frame of size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 24 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either sides and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rail with suitable PVC sheet beading and jointed together the solvent cement supplying & fixing in the frame at site as per specification and drawings complete, all as specified and as directed. |
| 25 | Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 26 | Supply and fix 100 mm size Mild steel butt hinges medium weight, including SS screws fixed to chowkhat complete all as specified and as directed. |
| 27 | Supply and fix 75 mm size Mild steel butt hinges medium weight, including SS screws fixed to chowkhat complete all as specified and as directed. |
| 28 | Supply and fix 100 mm long aluminium anodised barrel tower bolt complete all as specified and as directed. |
| 29 | Supply and fix 150 mm long aluminium anodised barrel tower bolt complete all as specified and as directed. |
| 30 | Supply and fix 150 mm long aluminium handle fabricated type anodised complete all as specified and as directed. |
| 31 | Supply and fix 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed. |
| 32 | Supply and fix 300 mm, size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 33 | Material and labour for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and as directed. |
| 34 | Supply and fixing in repairs 100 mm size mild steel body Mortice lock, vertical type, with 4 levers, fixed to aluminium door complete, all as specified and as directed. |
| 35 | Supply and fix 4 mm thick glass sheet ordinary quality and glazing with oil putty in sqm not exc 0.50 sqm in each pane complete, all as specified and as directed. |
| 36 | Supply and fix 4 mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete, all as specified and as directed. |
| 37 | Supply and fixing in repairs 600mm x 450mm bevelled edge mirror of selected quality glass (frameless), complete all as specified and as directed. |
| 38 | Supply and fixing in repairs Door closer hydraulically regulated, designation No. 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg aluminium cast body and fixed, complete all as specified and as directed. |
| 39 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and as directed. |
| 40 | Providing and fixing false ceiling at all heights with URG(Glass fibre reinforced gypsum) false ceiling tiles of size 595x595mm ,9mm thick of approved texture design and patterns having moisture content less than 2% humidity resistance of 99% NRCO 0.50 to 0.75 as per IS 8225:1989, Non-combustible as per BS 476(Part 4) 1970 and light reflectance of 85%(minimum) to be laid in three horizontal level suspended on cater locking metal T-Grid of hat dipped galvanised iron section of 0.33 mm thick(galvanised @ 120 gms per sqm including both sides, comprising of main T-runner of size 15x32mm of length 3000mmGross -T of size 15mmx 32 mm of length 1200mm and secondary intermediate Gross T size 15mmx 32 mm of length 600mm from grid module of size 600x600mm suspended from ceiling using galvanised mild steel items(galvanising @80gmperSqm) ie. 50mm long 8mm counter dia M-6 dash fasteners, 6mm dia fully threaded hangers rod up to 1000mm length and L-Shaped level adjuster of size 85x25x2mm, galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partitions with the help of plastic Rawal plug at 450mm c/c and 40mm long dry wall wood screws. The work shall be carried out as per specifications with 9mm thick semi perforated micro regular edged GRG false ceiling tiles, complete all as specified and as directed. |
| 41 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed. |
| 42 | Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillars etc, complete all as specified and as directed. |
| 43 | Material and labour for Pre-cast cement concrete block masonry with solid blocks, 10 cm thick and setting in cement mortar 1:6 type C-1 1:3:6 (20 mm graded aggregate), complete all as specified and as directed. |
| 44 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. including removal of debris out of side MoD land complete all as specified and as directed. |
| 45 | Material and labour for plastering 10mm thick in cement mortar 1:6 on brick or stone walls or other than fair faces of brick work to be finished even and smooth (without using extra lime or cement) complete all as specified and as directed. |
| 46 | Material and labour for cement plaster 10mm thick in cement mortar 1:3 on concrete surface as on ceiling finished even and smooth without using extra cement complete all as specified and as directed. |
| 47 | Material and labour for plastering 15mm thick in cement mortar 1:4 on brick or stone walls or other than fair faces of brick work to be finished even and smooth (without using extra lime or cement) all as specified and as directed. |
| 48 | Material and labour for preparation of new plastered/concrete surfaces of walls, providing 3mm thick Birla white or equivalent wall care putty to achieve smooth surfaces and applying two coats of distemper oil emulsion of approved shade/tint over a coat of compatible priming paint complete all as specified and as directed. |
| 49 | Material and labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces, complete all as specified and as directed. |
| 50 | Supply and fix mild steel 25x3mm MS Flat for holdfast, cleat etc. for door frame etc. conforming to Fe-410-0 or Fe-310, complete all as specified and as directed. |
| 51 | Material and labour for PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) as in hold fast block incl. necessary form work complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender