Tender For Comprehensive Maintenance And Repair And Replacement Of Internal Fittings And Fixtures And B/R Items Of Temp Bldgs At A &B Grn And Periodical Services For Permt Bldgs At A &B At Khanabal Under Ge 861 Ews
Tender Value
17.25 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
11 days left
EMD
34500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance And Repair And Replacement Of Internal Fittings And Fixtures And B/R Items Of Temp Bldgs At A &B Grn And Periodical Services For Permt Bldgs At A &B At Khanabal Under Ge 861 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE 861EWS Name of Work: COMPREHENSIVE MAINT AND REPAIR AND REPLACEMENT OF INTERNAL FITTINGS AND FIXTURES AND B/R ITEMS OF TEMP BLDGS AT 'A' &'B' GRN AND PERIODICAL SERVICES FOR PERMT BLDGS AT 'A' &'B' AT KHANABAL UNDER GE 861 EWS Contract No: GE 861 EWS-42(T)/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With TaxesRs. P TOTAL AMOUNT In Words |
| 2 | Material & Labour for Non Skid Glazed Ceramic tiles coloured ( shade as approved by Engineer-in-charge ) ,7 to 8 mm thick, in Square / Rectangular ,polished , area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, laid as in floors set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the shade of tiles , laid over with and including 15mm thick screed bed in cement mortar 1:6, with and Including dismantling floor hearth or wall tilling including cement mortar bedding removing rubbish off premises , complete all as specified and directed by Engineer-in-Charge. |
| 3 | Material & Labour for Non Skid Glazed Ceramic tiles coloured ( shade as approved by Engineer-in-charge ) ,7 to 8 mm thick, in Square / Rectangular ,polished , area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, laid as in floors set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the shade of tiles , laid over with and including 15mm thick screed bed in cement mortar 1:6, with and Incl uding dismantling floor hearth or wall tilling including cement mortar bedding removing rubbish off premises complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material & Labour for Glazed ceramic coloured tiles size 450mm x 300mm x 7mm thick as in verticle surface , set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including 10mm thick rendering in cement mortar 1:4 with and including dismantling floor hearth or wall tilling including cement mortar bedding removing rubbish off premises complete all as specified and directed by Engineer-in-Charge. |
| 5 | Supply & Fixing in replacement Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Supply & Fixing in replacement Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Supply & Fixing Mild steel work as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer-In-Charge. |
| 8 | Supply & Fixing Solid PVC door frame of size 50mm x 47mm made out of 5 mm single side prelam PVC sheet reinforced with MS square tube manufactured as per SSR Part-I specifications and drawings complete all as specified and directed by Engineer-in-Charge.Note:- 1.The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account. |
| 9 | Supply & Fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed by Engineer-in-Charge. |
| 10 | Supply & Fixing Butt hinges 100 mm size, extruded aluminum alloy with galvanized mild steel pin type B-21 anodized,complete all as specified and directed by Engineer-in-Charge |
| 11 | Taking down chowkhats or frames with shutters of PVC door , wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified and as directed by Engineer-in- charge. |
| 12 | Supply & Fixing 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and as directed by Engineer-in-charge. |
| 13 | Supply & Fixing 150mm aluminum handle cast type anodized complete all as specified and as directed by Engineer-in-charge. |
| 14 | Supply & Fixing in replacement of 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling with nails to timber frame, complete all as specified and directed by Engr-in-charge. |
| 15 | Supply & Fixing in replacement of 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in wall with nails to timber frame, complete all as specified and directed by Engr-in-charge. |
| 16 | Material & Labour in replacement 2nd class soft wood plain fillets square/rectangular or triangular in section of sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm splayed chamfered or rounded on one edge or face complete all as specified and directed by Engineer-in-Charge. |
| 17 | Supply & Fixing in replacement 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails not exceeding 3 Sqcm bull ,splayed,chamfered or rounded on one edge or face complete all as specified and directed by Engr-in-charge. |
| 18 | Supply & Fixing in replacement 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails exc 3 Sqcm and n exc 6 Sqcm bull ,splayed,chamfered or rounded on one edge or face complete all as specified and directed by Engr-in-charge. |
| 19 | Supply & Fixing 20 mm outer diametre 3-layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN 16) UV Stabilized and anti-microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, with and Including Taking up or down 20 mm bore steel tubing complete all as specified and directed by Engr-in-charge. |
| 20 | Supply & Fixing 16 mm outer diametre 3-layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN 16) UV Stabilized and anti-microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, with and Including taking up or down 15 mm bore steel tubing complete all as specified and directed by Engr-in-charge. |
| 21 | Material and labour for complete removal of existing treatment on wall(with using by brooming down or steel wire burshing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots ) , with and including 1.00mm thick wall care puty (as approved by Engineer-in-charge for smooth & even surface) over a coat of alkali resistant primer with and including applying two coats of Oil Emulsion Distemper complete all as specified and directed by Engineer-in-Charge. |
| 22 | Material and Labour for Preparation of old plastered or unplastered surfaces of ceiling (with using by brooming down or steel wire burshing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots ) and with and including one coat of Oil Emulsion Distember complete all as specified and directed by Engineer-in-Charge. |
| 23 | Material and labour for preparation of old surface of walls, with and including One coat of Oil Emulsion distember complete all as specified and directed by Engineer-in-Charge. |
| 24 | Material and labour for completre removal of existing surface (with using by brooming down or steel wire burshing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots ) , with over a coat of alkali resistant primer with and including applying two coats of Cement base paint complete all as specified and directed by Engineer-in-Charge. |
| 25 | Material and labour for preparation of old surfaces with using by brooming down or steel wire burshing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots ) , with and including applying One coat of Cement base paint complete all as specified and directed by Engineer-in-Charge. |
| 26 | Material and labour for preparation of old surface of walls, with and including two coat of White wash on wall complete all as specified and directed by Engineer-in-Charge. |
| 27 | Material & Labour for Preparation of old painted GI/steel surfaces of any description not otherwise described over 10cm width or girth as in roof and applying one coat of synthetic enamel paint specified and directed. |
| 28 | Material & Labour for Preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint over complete all as specified. |
| 29 | Material and labour for writing letters or figures (Block, Roman, Italic or Indian) n exc. 30 cm high with synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 30 | Material and labour for Stops,commas,short lines,dashes,hyphens,brackets with thick synthetic enamel paint of any shade as approved by Engineer-in- charge complete all as specified and directed by Engineer-in-Charge |
| 31 | Material & Labour for Brickwork with sub class ‘B’ burnt clay old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 32 | Material and labour for 15mm thick cement plastering in cm 1:4 on brick surfaces other than fair faces, finished the surfaces even and fair upto height 12m including taking down cement plaster any description on brick/ block/ stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etc,complete all as specified and directed by Engr-in-charge. |
| 33 | Material and labour for 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces,fair surface finished with smooth and even without using extra cement including taking down of cement plaster any description on brick/block/stone walls,roof etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 34 | Material and labour for preparation of new surface of walls, with and including two coats of oil bound distember,over with 1mm wall care putty complete all as specified and directed by Engineer-in-Charge. |
| 35 | Material and labour for preparation of new plastered surface of walls with and including applying two coats of Cement base Paint over a coat of alkali resistant primer,complete all as speciified and directed by Engineer-in-Charge. |
| 36 | Material and labour for 75 mm thick PCC 1:3:6 Type C-2 (40 mm graded stone aggregates) as in sub-floor, sub-base, floor and pavings, etc. with and including demolition of cement concrete (Unreinforced) in ground floor and paving not exceeding 15 cm thick below or above ground level, with and including removing rubbish material from site and thrown in low lying empty area (as per direcction of AGE/JE) complete all as specified and as directed by Engineer-in-chargecomplete all as specified and directed by Engr-in-charge. |
| 37 | Material and labour for coloured chequered cement concrete tiles glossy finished 30cm x 30cm x 25 mm thick, with grey cement & pigments set, jointed and pointed in neat cement slurry @ 3.00kg per sqm as in floors with and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed by Engr-in-charge. |
| 38 | Material and labour for Plain Cement concrete 1:2:4 , Type B-0, using 12.5 mm graded stone aggregates as in coping of interlocking tiles complete all as specified and directed by Engr-in-charge. |
| 39 | Material & Labour for Machine Pressed Precast Interlocking paver block with grey cement and no pigment, factory made, any shape and size, conforming to IS 15658-2006 of 60 mm thickness, made out of M-35 grade concrete laid over with and including 50mm thick sand cushioining complete all as specified and as directed by Engineer-in-charge. Note: The rate of 50mm thick Sand cushioning is included in this item and contractor shall quote his rates accordingly. Nothing shall be paid extra on this account. |
| 40 | Taking down carefully aluminum / copper point wiring on Teak Wood Batten / in conduit / with conduit / in casing and capping(light /Fan / socket or power) complete with and including taking down fittings such as switches, ceiling roses, pendants, Regulators, sockets, light fittings etc complete all as specified and directed by Engineer-in-Charge. Notes:(i) The weight of aluminium scrap, copper scrap and scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.(ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface shall be measured and paid seperately under serial item nos.40.00 to 43.00 of BoQ. |
| 41 | Material and labour for Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits),with 1.5 Sqmm two single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable 1100 volt grade ISI Marked , with and including PVC casing and capping of medium grade of suitable size and run on wall / surface with all fittings (ISI Marked) with and including one single core 1.5 Sqmm FRLSH PVC insulated multi strand copper conductor cable 1100 volt grade (ISI marked ) (as in green colour) as continues earth wire connected to earth dolly etc. controlled by one switch for one light point/ fan point / bell point with and including PVC Gang Box of required size & as directed by Engineer- in- Charge including cutting, chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed by Engineer-in-Charge. Notes for serial item nos.40.00 to 43.00 (i) Switches one way 5 /6 Amp , Switches one way 15 /16 Amp, Socket out lets 5 /6 Amp , Socket out lets 15 1/6 Amp , Switch Socket combination 5 /6 Amp , Switch Socket combination 15 1/6 Amp , Switches Bell push 5/6 Amp, Switch Two way 5/6Amp, Modular switches one way 5 /6 Amp , Modular switches one way 15 /16 Amp, Modular socket out lets 5 /6 Amp , Modular socket out lets 15 1/6 Amp , Modular switch socket combination 5 /6 Amp , Modular switch socket combination 15 1/6 Ampr , Modular Bell push switch 5/6 Amp and Modular two way switches 5/6Amp shall be measured and paid seperately under respective items of Schedule'A' BoQ.(ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface is included in this item and nothing shall be paid extra on this account. |
| 42 | All as per srl item No.40.00 here- in- before but for One 3 pin socket outlet, 5 Amps / Switch socket combination 2 in 1, 3 pin, 5 Amp on independent board complete all as specified and directed by Engineer-in-Charge. |
| 43 | All as per srl item No.40.00 here- in- before but for One 3 pin socket outlet, 5 Amps / Switch socket combination 2 in 1, 3 pin, 5 Amp on same board complete all as specified and directed by Engineer-in-Charge. |
| 44 | All as per srl item No 40.00 of BoQ here-in-before but 4.0 Sqmm two single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable 1100 volt grade ISI Marked with and including one single core 4.0 Sqmm FRLSH PVC insulated multi strand copper conductor cable 1100 volt grade (ISI marked ) as continues earth wire connected to earth dolly etc for 3 pin socket outlet 15 Amps / Switch socket combination 2 in 1, 3 pin, 15 Amp complete all as specified and directed by Engineer-in-Charge. |
| 45 | Supply and fixing ceiling rose PVC/ Polycarbonate insulated body type, 3 terminals, 240 volts, 5 Amps complete all as specified and directed by Engineer-in-Charge. |
| 46 | Supply and fixing Switch piano flush type 5 Amp single pole one way ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 47 | Supply & Fixing Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal 240 volt (ISI Marked ) complete all as specified and directed by Engineer-in-Charge. |
| 48 | Supply & Fixing Switch socket combination 2 in 1, 3 pin, 15 Amp flush type universal 240 volt (ISI Marked )complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply and fixing Lamp holder ISI marked , PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed by Engineer-in-Charge. |
| 50 | Supply and fixing Switch Bell push, piano flush type, 5 Amp 250 Volts, AC supply,ISI marked complete all as specified and directed by Engineer-in-charge. |
| 51 | Supply and fixing Electric / Electronic Bell, ding dong type 230 Volt AC supply,ISI marked complete all as specified and directed by Engineer-in-charge. |
| 52 | Supply & Fixing Fan step regulator, 120W - 2 module type electronic fan regulator, duly(ISI Marked ) with and including connector complete all as specified and directed by Engineer-in-Charge. |
| 53 | Supply & Fixing Modular switch 1 way 6A,1 module (ISI Marked ) complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply & Fixing in Modular switch 1 way 16A,1 module (ISI Marked ) all complete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply & Fixing in Modular socket, 6A - 2/3 pin combined 2 modules (ISI Marked ) complete all as specified and directed by Engineer-in-Charge. |
| 56 | Supply & Fixing in Modular socket 6/16A,2/3 pin, combined 2 module (ISI Marked) complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply & Fixing Modular Fan step regulator, 120W - 2 module type electronic fan regulator, duly(ISI Marked ) with and including connector complete all as specified and directed by Engineer-in-Charge. |
| 58 | Supply & Fixing White cover plate with frame, 2 module complete all as specified and directed by Engineer-in-Charge. |
| 59 | Supply & Fixing White cover plate with frame, 3 module complete all as specified and directed by Engineer-in-Charge. |
| 60 | Supply & Fixing White cover plate with frame, 4 module complete all as specified and directed by Engineer-in-Charge. |
| 61 | Supply & Fixing White cover plate with frame, 6 module complete all as specified and directed by Engineer-in-Charge. |
| 62 | Supply and Fixing in repplacement Plug top 3 Pin 5/6 Amp 230 volts complete all as specified and directed by Engineer-in-Charge. |
| 63 | Supply and Fixing in repplacement Plug top 3 Pin 15/16 Amp 230 volts complete all as specified and directed by Engineer-in-Charge. |
| 64 | Supply and Fixing PVC Gang Box surface type suitable for fixing of 5 Pin, 5 Amp multipurpose switch socket on wall complete all as specified and directed by Engineer-in-Charge.Note: 5 Pin, 5 Amp multipurpose switch socket shall be measured and paid seperately under appropriate item of Schedule 'A'BoQ. |
| 65 | Supply and Fixing PVC Gang Box surface type suitable for fixing of 5 Pin, 15 Amp multipurpose switch socket on wall complete all as specified and directed by Engineer-in-Charge.Note: 5 Pin, 15 Amp multipurpose switch socket shall be measured and paid seperately under appropriate item of Schedule 'A'BoQ. |
| 66 | Supply and Fixing LED Lamp 9Watt ,230 Volt, AC Supply,, Energy efficien, long life complete all as specified and directed by Engineer-in-Charge. |
| 67 | Supply and fixing in repplacement Batten fitting 2 Feet Long , LED mirror light fiting 9/10 watt, 6000K, polycarbonate body and all other accessories fitting arrangements all other accessories fitting arrangements complete all as per manufacturer's instructions with and including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector complete all as specified and as directed by Engineer-in-Charge. Notes:(a) Contractor has to furnish a replacement warranty of 02 years for LED Light fittings complete including from the certifiy date of completion of CA. The product will be replaced free of cost in the following case :-(i) Manufacturing defects.(ii) Failure due to mechanical and electrical impact. (iii) Drop in lumen (or lux at 1 m) below 90% of clamied values of lumen(or lux at 1 m) of the LED /Luminaries. (b) All LED light must meet the provision laid down in IS - 16101, 16102 Part -I/II,16103 Part -I, 16104,16105,16106, 16108/2012 and 15885 Part -II / Section 13. (c) Scope of work shall include LED Light fittings walls/ceiling which includes needful T & P and required accessories etc if any, complete including making connection, testing etc complete. No extra payment is admissible on these account. |
| 68 | Supply and Fixing in replacement Decorative ultra slim linear LED 20 Watt 4 Feet Long lighting fixture with extruded aluminium heat sink,environment friendly, Energy efficient , ready to use pack with and including LED Tube complete , with inbuilt electronic driver, PCB, Connector block complete all as per manufactureres instructions with and including connecting up with theree copper flexible cable from ceiling rose to fitting including connectiong up and fixed on with and including two nos.square box of required size complete all as specified and directed by Engineer-in-charge. Notes:(a) Contractor has to furnish a replacement warranty of 02 years for LED light fittings complete including from the certifiy date of completion of CA. The product will be replaced free of cost in the following case :-(i) Manufacturing defects.(ii) Failure due to mechanical and electrical impact. (iii) Drop in lumen (or lux at 1 m) below 90% of clamied values of lumen(or lux at 1 m) of the LED /Luminaries. (b) All LED light must meet the provision laid down in IS - 16101, 16102 Part -I/II,16103 Part -I, 16104,16105,16106, 16108/2012 and 15885 Part -II / Section 13. (c) Scope of work shall include LED fittings walls/ceiling which includes needful T & P and required accessories etc if any, complete including making connection, testing etc complete. No extra payment is admissible on these account. |
| 69 | Supply & Fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp complete all as per manufacturer's instructions suitable for roof ceiling with and including connecting up with driver from ceiling rose with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. Notes:-(a) Contractor has to furnish a replacement warranty of 02 years for LED Light fittings complete including from the certifiy date of completion of CA. The product will be replaced free of cost in the following case :-(i) Manufacturing defects.(ii) Failure due to mechanical and electrical impact. (iii) Drop in lumen (or lux at 1 m) below 90% of clamied values of lumen(or lux at 1 m) of the LED /Luminaries. (b) All LED light must meet the provision laid down in IS - 16101, 16102 Part -I/II,16103 Part -I, 16104,16105,16106, 16108/2012 and 15885 Part -II / Section 13. (c) Scope of work shall include LED Light fittings walls/ceiling which includes needful T & P and required accessories etc if any, complete including making connection, testing etc complete. No extra payment is admissible on these account. |
| 70 | Supply & Fixing in replacement LED luminaire round/squre shape 15 watts 220 V AC surface/recessed type with hight efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling/surface complete all as per manufacturer's instructions suitable for roof ceiling with and including connecting up with driver from ceiling rose with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. Notes:-(a) Contractor has to furnish a replacement warranty of 02 years for LED Light fittings complete including from the certifiy date of completion of CA. The product will be replaced free of cost in the following case :-(i) Manufacturing defects.(ii) Failure due to mechanical and electrical impact. (iii) Drop in lumen (or lux at 1 m) below 90% of clamied values of lumen(or lux at 1 m) of the LED /Luminaries. (b) All LED light must meet the provision laid down in IS - 16101, 16102 Part -I/II,16103 Part -I, 16104,16105,16106, 16108/2012 and 15885 Part -II / Section 13. (c) Scope of work shall include LED Light fittings walls/ceiling which includes needful T & P and required accessories etc if any, complete including making connection, testing etc complete. No extra payment is admissible on these account. |
| 71 | Supply and fixing in repplacement sheet metal enclousers made out of CRCA mild steel sheet , IP-43 protection, flush mounted with metal door, powder coated DB SPN 4 way 230 V AC with 200 Amp rated copper bus bar, Double Door, dust and vermin proof suitable for incorporation of MCBs / MCCBs/ Isolators etc.conforming to IS/IEC-61439-2:2011, BS-5484 complete all as specified and directed by Engineer-in-charge. Notes: (i)MCBs / MCCBs/ Isolators shall be measured and paid seperately under appropriate items.(ii) The rate of 200 Amps copper bus bar is included in this item and nothing shall be paid extra on this account. |
| 72 | Supply and fixing in repplacement sheet metal enclousers made out of CRCA mild steel sheet , IP-43 protection, flush mounted with metal door, powder coated DB SPN 8 way 230 V AC with 200 Amp rated copper bus bar, Double Door, dust and vermin proof suitable for incorporation of MCBs / MCCBs/ Isolators etc.conforming to IS/IEC-61439-2:2011, BS-5484 complete all as specified and directed by Engineer-in-charge. Notes: (i)MCBs / MCCBs/ Isolators shall be measured and paid seperately under appropriate items.(ii) The rate of 200 Amps copper bus bar is included in this item and nothing shall be paid extra on this account. |
| 73 | Supply and fixing in replacement sheet metal enclousers made out of CRCA mild steel sheet , IP-43 protection, flush mounted with metal door, powder coated TPN, 4 Way 415 V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCBs / MCCBs/ Isolators, conforming to IS/IEC-61439-2:2011, BS-5484 dust and vermin proof, complete all as specified and directed by Engineer-in-charge. Notes:(i)MCBs / MCCBs/ Isolators shall be measured and paid seperately under appropriate items.(ii) The rate of 200 Amps copper bus bar is included in this item and nothing shall be paid extra on this account. |
| 74 | Supply and fixing MCCB 63 Amp , AC 415 Volt, 4 Pole , rupturing capacity not less than 16 KA . complete all as specified and directed by Engineer-in-charge. |
| 75 | Supply and fixing MCB SP 6 to 32 Amps, 230 volts , AC supply , rupturing capacity not less than 10KA,' C' Curve ,ISI Marked, with and including necessary attachment , thimbles etc complete all as specified and directed by Engineer-in-charge. |
| 76 | Supply and fixing MCB SPN 32 Amp , rupturing capacity not less than 10 KA 'C' curve 230 V AC, 50 Hz ,ISI Marked, with and including necessary attachment , thimbles etc. complete all as specified and directed by Engineer-in-charge. |
| 77 | Supply and fixing MCB SPN 40 Amp , rupturing capacity not less than 10 KA 'C' curve 230 V AC, 50 Hz ,ISI Marked, with and including necessary attachment , thimbles etc. complete all as specified and directed by Engineer-in-charge. |
| 78 | Supplying and fixing MCB TPN 40Amps -100 Amps , 415 Volt AC, 'C' curve, ISI Marked, rupturing capacity not less than 10KA, with and including necessary attachment , thimbles etc complete all as specified and directed by Engineer-in-charge. |
| 79 | Material and Labour Sub main wiring with two single core of size 1.5 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked , with and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) , drawn in , with and including one single core of size 1.5 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked as in contineous earth conductor cable connected to earth dolly complete all as specified and as directed by Engineer-in- charge. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. Notes:-(a) Cost of PVC casing and capping medium grade of suitable size , fittings and earth wire included in sub main wiring. (b) Three single core 1.5 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked with and Cost of PVC casing and capping medium grade of suitable size and fittings shall be measured as one length. |
| 80 | Material and Labour Sub main wiring with two single core of size 2.5 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked , with and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) , drawn in , with and including one single core of size 2.5 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked as in contineous earth conductor cable connected to earth dolly complete all as specified and as directed by Engineer-in- charge. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. Notes:-(a) Cost of PVC casing and capping medium grade of suitable size , fittings and earth wire included in sub main wiring. (b) Three single core 2.5 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked with and Cost of PVC casing and capping medium grade of suitable size and fittings shall be measured as one length. |
| 81 | Material and Labour Sub main wiring with two single core of size 4.0 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked , with and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) , drawn in , with and including one single core of size 4.0 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked as in contineous earth conductor cable connected to earth dolly complete all as specified and as directed by Engineer-in- charge. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. Notes:-(a) Cost of PVC casing and capping medium grade of suitable size , fittings and earth wire included in sub main wiring. (b) Three single core 4.0 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked with and Cost of PVC casing and capping medium grade of suitable size and fittings shall be measured as one length. |
| 82 | Material and Labour Sub main wiring with two single core of size 6.0 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked with and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) , drawn in , with and including one single core of size 6.0 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked as in contineous earth conductor cable connected to earth dolly complete all as specified and as directed by Engineer-in- charge. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. Notes:-(a) Cost of PVC casing and capping medium grade of suitable size , fittings and earth wire included in sub main wiring. (b) Three single core 6.0 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked with and Cost of PVC casing and capping medium grade of suitable size and fittings shall be measured as one length. |
| 83 | Supply and Fixing in replacement service cable 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed of nominal cross sectional area 16 Sqmm x 2.00 core complete all as specified and as directed by Engineer-in-charge. |
| 84 | Taking down old unserviceable service cable/underground (UG) cable of any size, including removal of unserviceable bricks/PCC cable covers, with and including Supply and laying or fixing or laid in trenches/ ducts/ through pipes/ in floors / under roads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened, bedded, galvanised steel strip or wire armourd cable (heavy duty) 1100 volt grade with aluminium conductor having cross sectional area 16 Sqmm 4.00 core conforming to IS-7098 (Part-I -1988) complete all as specified and as directed by Engineer-in-Charge. Notes:(a) Earth work such as excavation, returning filling and removal shall be measured and paid for separately under relevant items of Schedule 'A' BoQ..(b) Where new/old cable is laid along the same alignment/location, earth work such as excavation, returning filling and removal shall be measured and paid only once. No duplicate measurement shall be admissible in this regard. |
| 85 | Supply & Fixing in replacement casing caping 20 mm with and including all accessories required at site as specified and directed by Engineer - in - Charge |
| 86 | Material and Labour for disconnecting taking down,strip opening,cleaning all parts and and packing of exhaust fan of any make and size & greasing ball bearing with specified quality grease and recommissioning the same including making new electric flexible wire connection,complete all as specified and directed by Engineer-in-charge Note:Replacement of spare parts,rewinding,painting shall be measured and paid seperately under appropriate items of Schedule'A' BoQ. |
| 87 | Material and Labour for disconnecting taking down,strip opening,cleaning all parts and and packing of Ceiling fan of any make and size & greasing ball bearing with specified quality grease and recommissioning the same including making new electric flexible wire connection,complete all as specified and directed by Engineer-in- charge. Note:Replacement of spare parts,rewinding,painting shall be measured and paid seperately under appropriate items of Schedule'A' BoQ. |
| 88 | Material and Labour for short circuit/over-heated windings from starter of Ceiling fan of any make having 1200/1400mm sweep with matching guage & turns of super enamelled copper winding wire complete with leathered paper,glass sleeves,varnishing,baking heating,drying,cleaning fan bearing/bushes,greasing,oiling and reassembling of fan with testing et complete all as specified ands directed by Engineer-in-Charge. |
| 89 | Material and Labour for short circuit/over-heated windings from starter of exhaust fan of any make having 300mm/350mm/450mm sweep with matching guage & turns of super enamelled copper winding wire complete with leathered paper,glass sleeves,varnishing,baking heating,drying,cleaning fan bearing/bushes,greasing,oiling and reassembling of fan with testing et complete all as specified ands directed by Engineer-in-Charge. |
| 90 | Supply and Fixing Gun metal bush of suitable size for ceiling fan of any make , any size, any sweep complete all as specified ands directed by Engineer-in-Charge. |
| 91 | Supply and fixing in replacement Ball bearing suitable for 1200mm /1400mm sweep ceiling fan of any make , any size, any sweep complete all as specified ands directed by Engineer-in-Charge. |
| 92 | Supply and fixing in replacement connector block of ceiling fan complete all as specified ands directed by Engineer-in-Charge. |
| 93 | Supply and fixing in replacement of capacitor 2.5mfd AC 230 volt 50Hz complete all as specified ands directed by Engineer-in-Charge. |
| 94 | Supply and fixing in replacement Ball bearing suitable size for Exhaust Fan 300mm / 450mm sweep complete all as specified ands directed by Engineer-in-Charge. |
| 95 | Supply and fixing in replacement of capacitor 3.15 mfd AC 230 volt 50Hz complete all as specified ands directed by Engineer-in-Charge. |
| 96 | Taking down geyser carefully of any make and capacity 25/35/ 50ltrs, dismantling the geyser for inspection, cleaning of tank, repalcement of defective part such as heating element, thermostat switch, spacer ring, safety plug, glass wool, neon lamp, head assembly, rubber gasket, top and bottom cover, inspection plate, copper cable 3 core, 3 pin Top plug, element holding clamp, welding of studs for head assembly, defective inner and outer shell reassembling the geysers with one coat of milky white enameled, spray paint of approved quality after cleaning of all dust rust etc and writing of MES No on the geyser using black paint, Reinstallation of geysers to its original postion complete all as specified and as directed by Engineer-in-charge. Note : 1. Supply only Spare parts such as heating element thermostat switch, spacer ring, heon lamp, head assembly, glass wool, safety plug rubber, gasket, copper cable, top & bottom cover, inspection plate, CP & PVC connection, Plug Top, Outer & Inner shell element holding clamps etc shall be measured & paid for seperately in respective items of Schedule'A' BoQ .2. The labour element of these items is included in this item and nothing shall be paid extra on this account. |
| 97 | Supply only heating element any type (i.e; Cup,thread or triangular) 1.5 KW, 220/230 volts ISI marked. |
| 98 | Supply only heating element any type (i.e; Cup,thread or triangular) 2.0 KW, 220/230 volts ISI marked. |
| 99 | Supply only Thermostat switch ISI marked complete all as specified and directed by Engr-in-Charge. |
| 100 | Supply only Hot and cold water connection made of brass pipe chrumium plated upto 18\\" length complete with rubber washer & brass nuts, ISI marked all as directed by Engineer-in-charge. |
| 101 | Supply only Auto cut switch suitable for geyser 25-50 Ltr capacity 230 volts, AC |
| 102 | Supply only geyser inner tank assembly made of brass with inlet/outlet & over flow provision rubber washer suitable for 25 ltrs capacity all as specified and directed by Engr-in-Charge. |
| 103 | Supply and fixing glass wool for Insulation purpose in any make and any capacity storege type water heater complete all as specified and directed by Engineer-in-Charge. |
| 104 | Supply and Fixing in replacement outer body including upper and lower cover and inspection plate made out of MS sheet duly painted with super enamelled synthetic paint over a coat of steel primer suitable for 25 ltr storage type water heater,complete all as specified and as directed by Engineer-in-Charge |
| 105 | Supply and Fixing in replacement three core copper conductor multi stranded 1100 volt grade having size 40/0.0076 complete all as specified and as directed by Engineer-in-Charge |
| 106 | Supply and fixing in replacement Wall Mounted Fan of 450 mm sweep, 230 Volts, single phase, complete with jerk-free oscillation, smooth running, three balanced blades, pull-cord switches, suitable fixing arrangement and all accessories, complete all as specified and directed by the Engineer-in-Charge. |
| 107 | Supply & Fixing in replacement LED Security street light fitting 35 Watt 230 V AC outdoor type, energy saving and environment friendly light fitting with electronic gear housed with high pressure die cast aluminum housing LED street light luminaires complete with IP66 protection including all accessories complete all as specified and directed by Engineer-in-Charge. Notes:-(a) Contractor has to furnish a replacement warranty of 02 years for LED Light fittings complete including from the certifiy date of completion of CA. The product will be replaced free of cost in the following case :-(i) Manufacturing defects.(ii) Failure due to mechanical and electrical impact. (iii) Drop in lumen (or lux at 1 m) below 90% of clamied values of lumen(or lux at 1 m) of the LED /Luminaries. (b) All LED light must meet the provision laid down in IS - 16101, 16102 Part -I/II,16103 Part -I, 16104,16105,16106, 16108/2012 and 15885 Part -II / Section 13. (c) Scope of work shall include LED Light fittings walls/ceiling which includes needful T & P and required accessories etc if any, complete including making connection, testing etc complete. No extra payment is admissible on these account. |
| 108 | Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/BOQ Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender