Tender For special Repair Of Rhombus Ai Ops Room At T-84 Under Ge(S) Tezpur
Tender Value
48.13 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
8 days left
EMD
96300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Rhombus Ai Ops Room At T-84 Under Ge(S) Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | M&L Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise area exc 100 sq cm but not ext 250 Sq cm complete all as specified and as directed |
| 2 | M&L Framed Work such as Grills, Gratings, etc. with ends of Bars shouldered and/or riveted, or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed |
| 3 | S&F 12 mm dia MS bolts purpose made with hexagonal or square head on one end and screwed the other, screwed and fitted with nut and washer, length 4.0 cm complete all as specified and as directed. |
| 4 | M&L Plain Cement Concrete type B-1, (1:2:4) (20mm graded crushed stone aggregate) as in Coping bed plate, leveling coursehold fast etc,block benching,channeling slightly rounded or chamfered angle and throating including form work and finishing all exposed faces of cement concrete complete all as specified and as directed. |
| 5 | M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 6 | S&F 1st class hard wood (Teak) Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, including fixing after fully finished with smooth surfaces etc complete all as specified and as directed |
| 7 | M&L for three coats of glossy/melamine polishing on wooden surfaces of any description as approved shade/design/pattern, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed |
| 8 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards any thickness, including cover fillets complete all as specified and as directed |
| 9 | Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters (without taking off shutters from the frame) including dismantling of PCC bed blocks for hold fasts.complete all as specified and as directed |
| 10 | Material and labour for providing Plain Cement Concrete (1:3:6) type C1 using 20mm graded aggregate as in hold fast/ chajja complete all as specified and as directed |
| 11 | S&F factory made uPVC white color Sliding window Two track Area not exceeding 2.00 sqm each,made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed(white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock complete all as per specified and directions of Engineer-in-Charge. |
| 12 | S& F 5.0 mm thick sheet figured/pin headed glass and glazing with gaskets in squares n. exc 0.5 sq. m in each pane in squares.complete all as specified and as directed |
| 13 | M&L Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level complete all as specified and as directed |
| 14 | M&L 75 mm thick PCC 1: 3:6 type C2 using 20mm graded agg finishing even and smooth using extra cement as in plinth protections/path/paving including filler joints with sealing compound grade 'A' complete all as specifed and as directed. |
| 15 | Demolition of reinforced cement concrete of any description and in any position complete all as specified and as directed |
| 16 | Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and pre-cast concrete articles complete all as specified and as directed |
| 17 | M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm complete all as specified and directed. |
| 18 | Material and labour for old size sub Class B bricks bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:4) having compressive strenght not less than 75 kg/Sq cm complete all as specified and directed. |
| 19 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction but welded tubes conforming to IS- 1161-1979 grade St-240 complete all as specified and directed |
| 20 | Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed |
| 21 | Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair complete all as specified and as directed |
| 22 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even & smooth (without using extra lime or cement) complete all as specified and directed |
| 23 | M&L Applying two coats of Oil bound distember to wall over a coat of layer wall care putty over a coat of primer including preparation of newly platsered wall complete all as specefied and directed. |
| 24 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed. |
| 25 | M&L Vitrified tiles double dark of 8 to 10 mm thick (square/ rectangular) of any shade, polished, area of each tiles exceeding 0.42 but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.complete all as specified and as directed |
| 26 | Supply & Fix in repairs floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 140 mm complete all as specified and directed |
| 27 | S & F in repairs Brass mortice lock verticle type 75 mm 4/6 levers complete all as specified and directed |
| 28 | S & F In repairs Double action floor spring heavy duty hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specififed and directed |
| 29 | S & F 150mm Butt hinges, extruded brass with galvanised SS pin,bright polished and fixed, type B-11, complete all as specified and directed |
| 30 | S & F in repairs Aluminium (extruded section body type) door closer hydraulically regulated designation No 3, universal type , suitable for door shutter of 851 to 1000 mm in width and of weight and weight betwwen 61 to 80 kg complete all as specified and directed. |
| 31 | S & F solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 32 | S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 33 | M&L mild steel bars 10 mm dia and over cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with mild steel wire complete all as specified and as directed |
| 34 | M&L for form work to sides of concrete foundations, footings, bases of colunns, raft and raft beams sides and soffits of foundation and plinth beams,and similar work , vertical or batter, rough finished surface of concrete complete all as specified and as directed |
| 35 | M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions incl with smooth finished with putty and 2 coats of distemper complete all as specified and directed. |
| 36 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel section of size 23x20x18mm of thickness 0.35 mm with two intermediate channel section of size of flange of 12mm, web 45mm, thickness 0.50mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 26mm, web of 40 mm thickness of 0.35mm suspended from soffit at approx 600 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 37 | Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of df bed blocks for hold fasts.complete all as specified and as directed |
| 38 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 39 | S&F Powder coated aluminium window and ventilator shutters,(Thickness or powder coating not less than 50 micron). sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc.complete all as specified and as directed. |
| 40 | Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering complete all as specified and as directed. |
| 41 | S&F Pre-painted colour galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 42 | S&F Pre-painted colour galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 43 | M&L Preparing new plastered surfaces of Walls and applying Two Coats of Exterior Emulsion Paint Weather Coat over a coat of Primer (as per Manufacturer’s instructions), and applied over 1mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 44 | Supply and fix, 35 mm thick, flush moulded door shutters, solid core construction, with a decorative veneer surface finished both faces and designed to be resistant to warping and scratch both sides complete all as specified and directed |
| 45 | S & F 100mm Butt hinges, extruded brass with galvanised SS pin,bright polished and fixed, type B-11, complete all as specified and directed |
| 46 | S&F in repairs stainless steel curtain rod of 20/25 mm bore incl brackets and end knobs for door and window complete all as specified and directed. |
| 47 | M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed |
| 48 | M & L Hardcore of guage exc 63mm but n exc 150mm deposited spread and levelled in layers n. exc 7.5cm thick, with broken stone, watered and rolled/rammed to a true surface, complete all as specified and as directed. |
| 49 | M&L for cement concrete Type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete. complete all as specified and as directed. |
| 50 | M & L for 25mm thick Plain Cement concrete 1:2:4 type B-1 using 20mm gradded agg as in sub-base.complete all as specified and as directed |
| 51 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep for sewage pipe line etc. and getting out in soft/loose soil complete all as specified and as directed by Engr-in-Charge. |
| 52 | Returning, filling in, including spreading leveling watering and well ramming in layers n,exc 25 cm thick in soft /loose soil for sewage pipe line /manhole and cleaning the site complete all as specified and as directed. |
| 53 | Removing excavated materials n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point complete all as specified and directed. |
| 54 | M&L for RCC Nominal mix type B-1 1:2:4 (20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, underremaed pliles and mass concrete complete all as specified and as directed |
| 55 | M&L TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed |
| 56 | M&L for RCC Nominal mix type B-1 1:2:4 (20 mm graded stone aggregate) in Beams, cantilevers, bressummers,lintels over 1.5m span completer all as specified and directed. |
| 57 | S&F 18mm thick Factory made WPC (Wood Polymer Composite) solid board with laminated wooden finish fixing to wall with PVC solvent or screwed with full body threaded star headed SS screws having minimum density of 750 kg/cum, complete all as specified and directed. |
| 58 | Providing and fixing 60mm thick solid core soundproof acoustical wooden door with glossy/melamine polish in both faces, automatic drom-down bottom seal, heavy duty magnetic acoustic gaskets, 450mm SS round handles in both ways, door closer with acoustic sealant with heavy duty 150mm brass hinges, a mortise lock and all necessary hardware complete all as specified and directed by Engr-in-charge |
| 59 | S & F acoustical wall panels fixed on GI channel frame of size 48 mm x 32 mm x 0.5 mm thick making a grid of 610 x 610 mm c/c and using spl clips and ply board as per manfacturer's instruction. The frame is to be made in proper line after levelling. The panels will be backed with Rockwood 50 mm thick 96 kg/ cum density inserted inside the grid of 610 mm x 610 mm. The frame to be covered by ply boards of 12mm thick (Make : Marine/ CXentury/ Green Ply) using self tapping screws. The top surface panels to be of 100% polyesterfibre (Fire Retardant using FR) of 2400 mm x 600 mm/ 1800mm x 600mm/ 600mm x 600 mm x 12 mm thick as approved pasted using Healex/ SR 505. Density to be 180-200 Kg/ cum and NRC of 0.9. The panel should meet the stringent fire test required having Class 'P' rating for lgnitability test as per BS 476 part 5 and class '1' rating as per BS 476 part 7 for surface spread of Flame test. Class 'P' and Class '1' are the highest rating. BS 476 part 6 fire Propagation Index, I= not greater than 4.11 complete as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge. |
| 60 | Providing & fixing seamless false ceilling of fully perforated GYPSUM board of size 595 mm x 595 mm in approved design (Round/ Square Hole) at all height including providing & fixing of G.I frame work made out of steel galvanized @ 120 sqm zinc coating (both side inclusive) suspended soffded from ceilling through 50 mm long dash fastener, soffit cleat and ceilling angle bolted to intermediate channel of 45 x 15 x 0.9 mm running ayt the spacing of 1200 mm centre to centre. Ceilling section of 0.50 mm thick with bottom web of 50.5 mm spaced at 457 mm centre to centre in a direction perpendicular to G.I Intermediate channel is fixed with connecting clip including flxing of perimeter channels of 0.50 mm thick to the wall/ partition wih the help of PVC gitti & wooden screws at 450 mm centre.and backed with Sound Tex make non woven tissue (weight : 63 gram/ sqm) having properties of fire retardant, VOC free and free from halongens and antimony is to be scewed to the ceilling section and perimeter channel with the help of 25 mm long dry wall screws of 230 mm c/c, including jointing & finishing to a flush finish using USG sheetrock multipurpose jointing compound followed by painting with acrylic emulsion in approved shade, false ceilling all complete as above and inclusive of provision for openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitable fixed. 50 MM Th Glass Wool of density 48 Kg/ Cu.m shall be provided behind calcium silicate boards.complete all as specified and as directed |
| 61 | M&L Kiln Seasoned Maple Wood Techno Acer surface board finished with 21 mm thick, 55 to 85 m width and in random length in tongue and groove shapeThe Under Frame: Made of commercial quality Fir/Spruce/Pine wood runners of 70 mm X 45 mm treated with anti-termite solution and fixed on the bottom side with 10 mm thick EPDM air cushioning pads by nails through the two wings at 350 mm clc. Including polish and line marking complete all as specified and directed by Engr-in-charge |
| 62 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. including cutting chases of exsisting wall for wall taking out concealed conduit ec. and making good disturbed surfaces of walls, floors, etc as per existing specification after providing point wiring under respective items here-in-below complete all as specified and as directed. |
| 63 | Taking down main switches and DBs of any type and make including wooden board / junction box.complete all as specified and as directed. |
| 64 | M&L for concealed point wiring for one Light/ Fan/ Bell point complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20 mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, with and including modular metal flush box and Modular white Cover Plate with Frame for fixing modular switches, sockets fan regulators etc duly earthed. Connections of cable with MCBs or bus bar shall be sone through proper size of copper/brass thimbles complete all as specified and as directed. Note- The cost of Blanking plate if required shall deemed to be included in the unit price. |
| 65 | All as per item No. 64 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and as directed. |
| 66 | All as per item No. 64 here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and as directed. |
| 67 | All as per item No. 64 here - in - before but for 5 Amps socket point on the same board controlled by one switch.complete all as specified and as directed. |
| 68 | S&F modular switch flush type, 6 Amp, one way ,1 module complete all as specified and as directed. |
| 69 | S&F modular socket outlet, 3 pin, 6 Amp, flush type 2 module complete all as specified and as directed. |
| 70 | S&F modular switch, 16 Amp flush type 1 module complete all as specified and as directed. |
| 71 | S&F modular socket outlet, 3 pin, 6/16 Amp flush type 2 module complete all as specified and as directed. |
| 72 | S&F modular Fan Regulator stepped type 2 module ,120W complete all as specified and as directed. |
| 73 | S&F in modular bell push, flush type, 5 Amp,1 module complete all as specified and as directed. |
| 74 | S&F call bell Dingdong type AC 230 Volts single pole. complete all as specified and as directed. |
| 75 | S&F ceiling rose surface backelite three terminals. complete all as specified and as directed. |
| 76 | Supply and fix LED tube light fitting of 18 W with tube (4 Ft) 240 V Wall mounted LED batten Aluminium houseing and integrated electronic driver with high efficient LEDs 18 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and inclg connection. complete all as specified and as directed. |
| 77 | S&F on wall security light luminaire for 1x 25 W LED with deep drawn housing complete with GI Bracket of suitable size and including cable for connection from ceiling rose with 3 core 1.5 Sqmm PVC insulated stranded copper conductor complete all as specified and as directed. |
| 78 | Supply and fix for Recess/Surface mounting high lumen output LED light fittings of size 2 ft X 2 ft for metallic false ceiling type armstrong/US gypsum or similar ceiling mounting system with concealed or exposed 'T' section including 36 watt 6500 K LED CDL light, complete all as specified and as directed. |
| 79 | M&L in repair for sub main wiring with Four run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and two run of copper earth wire 4 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified and directed Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length. |
| 80 | M&L in repair for sub main wiring with Four run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and two run of copper earth wire 4 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified and directed Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length. |
| 81 | Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , 200 A copper bus bar , IP 43, Tripple pole and neutral (TPN) 415 Volt , double door, suitable for 4 way with dim rail earth and neutral bar complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 82 | Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , 200 A copper bus bar , IP 43, Tripple pole and neutral (TPN) 415 Volt , double door, suitable for 4 way with dim rail earth and neutral bar complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender