Tender For Repairs To Joinery, Ms Grill, Rolling Shutter And Certain B/R Repair Allied Work In Otm/Md Accn Of Depot Bn, Ajit Vihar, Ciw And Offr Md Accn Under Age B/R-Ii In Ge (Central) Khadki.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
19 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Joinery, Ms Grill, Rolling Shutter And Certain B/R Repair Allied Work In Otm/Md Accn Of Depot Bn, Ajit Vihar, Ciw And Offr Md Accn Under Age B/R-Ii In Ge (Central) Khadki.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats but with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc. 4 Sqm each etc complete all as specified and as directed. |
| 2 | Description all as No 01 above but n.exc. 1.50 sqm each |
| 3 | Taking down shutters of any description exc. 1.0 sqm and not exc. 2.0 sqm each complete all as specified and as directed. |
| 4 | Supply and fixing powder coated aluminium door made out of hollow extruded aluminium section as mentioned below:Each door having 02 Nos disc or D type handels, 02 Nos aluminium tower bolts 200 mm size one aluminium sliding door bolt or 250mm size, one brass mortice lock of six levers with key in duplicate regulated by double action hydraulic floor door spring (Make Sandhu/TITZ) shutter to be partly glazed with 5 mm thick tinted glass and partly panelled with 12 mm thick pre laminated particle board fixed with glazing clips, rubber beading/gasket anodized aluminium beading screws complete. Chowkhat Frame : 101.60x44.45x1.60 mm Shutter verticle/stile: 85.00x44.45x1.60 mm Shutter middle rail : 83.50x44.45x1.54 mm Shutter top and bottom rail : 110x44.45x1.54 mm |
| 5 | Supply and fix in repairs Aluminium excruded section body, door closer hydraulically regulated designation N0. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed. |
| 6 | Supply and fix for powder coated aluminium sliding windows having three Nos of tracks including one gauzed shutter for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm and two Nos of glazed shutters including 4mm thick plain sheet glass and minimum 1.2 mm wall thickness including shutters,interlocks,EPDM gaskets with necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonary wall complete including dismantling of old window of any type complete all as specified and as directed.Frame Section as below:-Bottom member (21446) : 91x31.75mmSide & Top (21447) : 91x31.75mm |
| 7 | Supply and fix for powder coated anodised aluminium ventilator shutters, fixed type without sash bar including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm, aluminium section comprising of outer frame 50mmx25mm with minimum wall thickness of 1.30mm, louver carrier sections of size 25mmx18mm including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.and fixed to stone masonry wall including demolition of RCC jali ventilators/old steel ventilator complete all as specified and as directed. |
| 8 | Material and labour 18mm to 20mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platfoms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed . |
| 9 | Supply and fix 2nd class hard wood (haldu/ hallock) plain, solid, straight chowkats & frames , wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed. |
| 10 | Cutting holes in stone / brick walls built in cement mortar for inserting hold fasts measured from face of jambs into wall exc. one brick but n. exc.two bricks &making good dismantled portion in cement mortar or cement lime mortar and stone walls built in lime mortar as required complete all as specified and as directed. |
| 11 | Supply and fix mild steel flat iron as in hold fasts fitted to chowkats with nails & welded to angle iron frames complete all as specified and as directed. |
| 12 | Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 13 | Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail, lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 14 | Supply and fix factory made 35 mm thick plain framed panelled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and chemically pressed of 2nd class hard wood complete all as specified and as directed. |
| 15 | Supply and fix flush shutter solid core 30 mm thick with block board core & ply wood face panels commercial type on both sides complete all as specified and as directed. |
| 16 | Supply and fix factory made 30 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified and as directed. |
| 17 | Supply and fix in repairs pre-laminated particle board 18/19mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl leaping patti incl dismantling complete all as specified and as directed. |
| 18 | Supply and fix continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps (when open) 30 mm complete all as specified and as directed. |
| 19 | Supply and fix ball catches with 8mm dia steel ball, and bras body and striking plate including letting in and fixed complete all as specified and as directed. |
| 20 | Supply and fix extruded aluminium alloy handles, 100 mm long fabricated type., anodised complete all as specified and as directed. |
| 21 | Supply and fix in repairs Butt Hinges medium weight cold rolled mild steel 100 mm long complete all as specified and as directed. |
| 22 | Supply and fix 150mm long Aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed. |
| 23 | Supply and fix for Extruded aluminium alloy handles 150 mm, fabricated type, anodised complete all as specified and as directed. |
| 24 | Supply and fix for stainless steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified and as directed. |
| 25 | Material and labour for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth complete all as specified and as directed. |
| 26 | Material and labour for two coats of synthetic enamel paint over a coat of redoxide primer on newly steel surfaces including all necessary preparation over 10 cms width or girth complete all as specified and as directed.. |
| 27 | Supply and fix as in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 28 | Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainlesssteel wire staples complete all as specified and as directed. |
| 29 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 30 | Supply and fix strucural steel framed work as in doors or gates of angles or other sections with gusset plates, rails bracers etc. complete with fixing /hanging arrangenets as required confirming to Fe 290 gde E 165 complete all as specified and as directed.. |
| 31 | Supply and fixing mild steel plain black sheet in steel gates and similar work 1.60mm thick cut to size, holes punched: including round headed screws, clout nails or rivetes and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning upo mitred angles, etc as required complete all as specified and as directed. |
| 32 | Material and labour for Framed work such as grills etc with ends of bar shouldered or revetted or forged into spikes framed guard bars including framed flat iron of any size and section to combined the windows complete all as specified and as directed.. |
| 33 | Supply and fix of 18mm thick Marine Plywood grade I with any colour of High glossy acrylic sheet of 1.5mm thick, for modular kitchen shutter including necessary aarangments for fixing hinges of kitchen trolly shutters & overhead cabinets shutter complete all as specified and as directed.. |
| 34 | Supply and fix of medium weight auto close hinges, cold rolled mildsteel, SS finish, (Partial overlay/fully overlay of any type) diameter of cup 35mm, Hinge cup depth 11.5mm, self-closing complete all as specified and as directed.. |
| 35 | Supply and fix of stainless steel 304 electro-polished for corrosion resistance modular thali holder / basket having size of 52.5 x 48.5 x 20 cm including telescopic drawer channel having weighing capacity of 6 kg/per channel complete all as specified and as directed. NOTE :- Size of basket may vary +5cm/-5cm |
| 36 | Supply and fix of stainless steel 304 electro-polished for corrosion resistance modular cup & saucer holder / basket size of 52.5 x 48.5 x 12 cm with telescopic drawer channel having weighing capacity of min 6kg/per channel complete all as specified and as directed. NOTE :- Size of basket may vary +5cm/-5cm |
| 37 | Supply and fix stainlesss steel modular perforated cutlery basket SS 3054 size size of 52.5x48.5x10 cm with telescopic drawer channel having weighing capacity of min 6 kg complete all as specified and as directed. NOTE :- Size of basket may vary +5cm/-5cm |
| 38 | Supply and fix in repairs of stainless steel grain trolley SS 304 having size of 525x485x200mm, with heavy duty and grade steelwith finish of zinc, corrosion resistance with telescopic drawer channel having weighing capacity of min 20 kg/per channel complete all as specified and as directed. NOTE :- Size of basket may vary +5cm/-5cm) |
| 39 | Supply and fix in repairs of stainless steel Plane wire Basket/ trolley SS 304 having size of 525x485x220mm, with heavy duty and grade steelwith finish of zinc, corrosion resistance with telescopic drawer channel having weighing capacity of min 25 kg complete all as specified and as directed.NOTE :- Size of basket may vary +5cm/-5cm) |
| 40 | Supply and fix of stainless steel hanging spice rack having three shelf spaces of size 525x220x450 mm with telescopic drawer channel having weighing capacity of min 6kg/per channe lcomplete all as specified and as directed. NOTE :- Size of basket may vary +5cm/-5cm) |
| 41 | Supply and fix of 'G' profile handle of size 35mm X 18mm auminium body powder coated cabinet drawers handle complete all as specified and as directed. |
| 42 | Supply and fix of 18mm thick Marine Plywood laminated sheet grade I of any colour of sheet of 1 mm thick, for overhead cabinets carcass and shelf complete all as specified and as directed. |
| 43 | Supply and fix of 100mm length stainless steel overhead cabinet doors handle complete all as specified and as directed. |
| 44 | Taking down old rolling shutter and refixing the rolling shutter on same position , incl having 1.0 mm thick MS steel sheet, spring, MS safety lever locks with 4 lever, 3 nos of ball bearing and MS handles including all necessary greasing & easing, replacement of unserviceable parts incl one coat of synthetic enamel paint over a coat of primer complete all as specified and as directed.NOTE :- Parts replaced shall be measured and paid seperately |
| 45 | Supply only MS steel sheet 1.0mm thick complete all as specified and as directed. |
| 46 | Supply only spring suitable for rolling shutter complete all as specified and as directed. |
| 47 | Supply only MS safety lever locks with 4 levers for rolling shutter complete all as specified and as directed. |
| 48 | Supply only ball bearing for rolling shutter complete all as specified and as directed. |
| 49 | Supply only MS handles 150mm in size for rolling shutter complete all as specified and as directed. |
| 50 | Material and labour for steel rolling shutters in repair, thickness of laths in 1.00mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, including taking of existing rolling shutter and taking in store, complete all as specified and as directed. |
| 51 | Hacking out old broken glass (any thickness size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed. |
| 52 | Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 53 | Supply and fix 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 54 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets. |
| 55 | Supply and fix in repair solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing as per direction complete all as specified and as directed. |
| 56 | Supply and fix for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed. |
| 57 | Supply and fix in repair wall paper -wall coverings fixed in repairs made from vinyl (PVF), coated with plastic; rustic metalic/ natural finish/ cork & mica finish/ wall texture finish; colour fast and washable with dust repellent property. as per approved sample including surface preparation and application all as per manufacturers standards. complete all as specified and as directed. |
| 58 | Demolition of precast concrete block /brick work walling built in cement mortar |
| 59 | Material and labour for Precast cement concrete block masonry using type C1 1:3:6 (20 mm graded Stone aggregate) with solid blocks, exc. 10 cm in width and setting in mortar1:6 complete all as specified and as directed. |
| 60 | Description all as per item no 59 above but except precast concrete blocks. |
| 61 | Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubing down with water etc all as specified and as directed |
| 62 | Material and labour for rendering 15 mm thick on faces of brick/ PCC block masonry wall using cement plaster 1:4 and rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 63 | Material and labour rendering 15 mm thick in cement mortar (1:6) on fair faces of block masonry surfaces or fair faces of brick work complete all as specified and as directed. |
| 64 | Material and labour for preparation new plastered surface of wall and applying two coats of distemper oil emulsion(OBD) over a coat of primer on wall surfaces complete all as specified and as directed. |
| 65 | Material and labour for preparing new plastered and applying two coat of cement based paint (any tint) over a coat of primer on walls complete all as specified and a directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender