Tender For special Repair To Drainage System Near Bldg No T-9 Single Offrs Accn Polo Road, Provn Of Interlocking Tiles In The Premises Of Sho Office Complex And Provn Of 03 X Toilets At Furniture Yard In The Area Of Age B/R-Ii Under Ge (East) Delhi C
Tender Value
49.63 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
9 days left
EMD
99280
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Drainage System Near Bldg No T-9 Single Offrs Accn Polo Road, Provn Of Interlocking Tiles In The Premises Of Sho Office Complex And Provn Of 03 X Toilets At Furniture Yard In The Area Of Age B/R-Ii Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Excavating over areas, not exc 1.5 m deep and getting out any type of soil complete all as specified and directed. |
| 2 | Removing excavated material exc 1.5km and not exc 5km and depositing where directed complete all as specified and directed. |
| 3 | M&L for Demolition of cement concrete in ground floor and paving not exc. 15 cm thick below or above ground level & remove disposal of building rubbish/malba, mechanical means, including loading, transporting, unloading and disposal at an approved Municipal dumping ground outside Defence land (MoD land) complete all as specified and as directed. |
| 4 | M&L for demolition of Stone slabs and tiles of any description or thickness laid ,bedded and pointed in any mortar in floors, aprons etc complete all as specified and as directed. |
| 5 | M&L for Hardcore of broken stone/boulders of gauge exc 63mm not exc 100mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 6 | M&L for 100 mm thick Cement concrete type D2 (1:4:8) using 40mm graded stone aggregate below paver block etc finished surface even and fair complete all as specified and directed. |
| 7 | M&L for Sand filling 50mm thick under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 8 | M&L for Machine pressed precast conctete interlocking paver block any colour ,shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with gret cement and pigment complete all as specified and directed. |
| 9 | M&L for cement concrete in 1:3:6 Type C1(20mm graded stone aggtts)as in filling in lintels upto 1.5M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing course, parapets and railings uppto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in , water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed |
| 10 | Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth foundation and getting out in any type of soil, complete all as specified and directed. |
| 11 | M&L for Plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in surface channels drain incl necessary form work complete, all as specified and directed. |
| 12 | M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete,using extra cement, including form, moulds, mitred/stopped ends etc complete all as specified & directed. |
| 13 | M & L Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds , mi-tred/ stopped ends etc. |
| 14 | S & F 300 mm Reinforced concrete pipes, Class NP2, laid and jointed complete with collers, complete all as specified and as directed. |
| 15 | M&L brick work with sub class' B' bricks of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed. |
| 16 | M & L rendering 10mm thick on brick wall or concrete surfaces in cement mortar 1:4 finished fair and even complete all as specified |
| 17 | Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps,and other similar bands,plinth courses, string courses, lacing courses, parapets and railing upto 60cm height,copings,kneelers,apex stone,bed plates and the like including weathering slightly rounded or chamfered angles and throating, all as specified and directed. |
| 18 | M&L for concrete bed to drain pipe 300mm dia using cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate, laid to falls including packing under and completely surrounding pipes witrh concrete after they are laid and tested, complete all as specified and as directed. |
| 19 | S&F factory made steel fibre reinforced (SFRC) man holes covers conforming to IS-12592 with frames incl necessary hold fast/hooks (medium duty) of area exc 0.5 sqm not exc 1 sqm or equivalent area complete all as specified and directed. |
| 20 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil, complete all as specified and as directed. |
| 21 | M&L for Machine pressed precast conctete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 Grade, complete all as specified and as directed. |
| 22 | M&L for PCC (1:4:8) Type D-2 using 40mm graded stone aggregate as in foundation, filling in mass concrete complete all as specified. |
| 23 | Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished, complete all as specified and as directed. |
| 24 | M&L for reinforced cement concrete (design mix) M-25 as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed. |
| 25 | M & L for mild steel TMT bar 10mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 26 | Description all as per item No 25.00 above but TMT bars 8mm dia and over, as in stirrups, spacers and binders complete all as specified and as directed. |
| 27 | Formwork to sides of pillars, footing, posts, struts, piers, columns and stanchions, finished even and fair complete. |
| 28 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.complete. |
| 29 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping).complete. |
| 30 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide |
| 31 | M&L for reinforced cement concrete (design mix) M-25 as in Footing, Columns, pillars, piers, posts and struts complete. |
| 32 | M&L for reinforced cement concrete (design mix) M-25 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete. |
| 33 | M&L for reinforced cement concrete (design mix) M-25 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete. |
| 34 | M&L for 75mm thick plain cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in sub base complete all as specified. |
| 35 | S&F for powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 36 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 37 | S&F for 3mm thick pin headed Sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete |
| 38 | S&F jointless aluminium window/ventilator as per TD drg No CEDZ/TD-316 with following specifications :- (i) Outer frame of size 40mmx114mm with 1.3 mm thickness, corner 45 degree cut & aluminium welded.(ii) Center mullion of size 40mmx65mm (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear/frosted glass both side IPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter. (iv) 12mm SS 304 grade round bar safety grill at 100mm distance in front of handle, welded at both ends with SS 304 flat 25x5mm (v) Welded wire mesh shutter (02 Nos) of size 40mmx18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh SS 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE. (vii) Window shall be installed with silicone complete all as specified and directed by Engr-in-Charge. |
| 39 | S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 40 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) complete all as specified and directed. |
| 41 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete. |
| 42 | S&F for 100mm long SS butt hinges, medium weight, cold rolled mild steel, and fixed |
| 43 | S&F for 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed |
| 44 | S&F for 150mm long extruded aluminium alloy handles, fabricated type, anodised |
| 45 | M&L Rendering 15 mm thick in cement mortar 1:4 on fair face of brick work/ concrete surfaces with water proofing admixture finished even and smooth without using extra cement complete all as specified and directed. |
| 46 | M&L Rendering 5mm thick in cement mortar 1:3 as in ceiling finished even and smooth without using extra cement to match with existing surface complete all as specified and directed. |
| 47 | M&L Rendering 15 mm thick in cement mortar 1:6 on fair face of brick work/ concrete surfaces complete all as specified and directed. |
| 48 | Supply only liquid water proofing compound complete all as specified and directed. |
| 49 | M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) of size area of each tile exc 0.18 sqm not exc 0.38sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed. |
| 50 | M & L for glazed ceramic tiles in vertical surface of size 300mmx600mm and 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 10mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 51 | S&F 15mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and directed. |
| 52 | Description all as per item No 51.00 above but 20 mm bore. |
| 53 | S&F white colour Rotational moulded polyethylene water storage tank 500 litres capacity, white triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including all fittings complete all as specified and as directed. |
| 54 | S & F Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) 'S' Trap/P-trap, including seat cover with connection to drain and to flushing pipe antisyphonage pipe and making good to floor complete all as specified and directed. |
| 55 | S&F Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe antisyphonage pipe including trap set in and including concrete etc complete including making good to floor all as specified and dirtected by Engr-in-Charge . |
| 56 | S&F 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket and flush pipe etc complete all as specified and directed |
| 57 | S&F brass chromium plated wall mixture 3 in 1 system with L- bend provision for over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. Make : Jaquar Continental CON-CHR-273KNUPR and equivalent in make of list as approved by GE |
| 58 | S & F CP shower rose fancy type 200mm x 200mm size with 600 mm long shower arm, fixed to 15mm bore pipe, complete all as specified and as directed. ( Make : Hindware /Jaquar or equivalent approved by GE) |
| 59 | S & F 65 x 95 mm rectangular shape single flow hand shower ( body & face plate stainless with ABS body in chrome finish) with rubit cleaning system including flexible pipe and fixed complete all as specified and as directed. (Make : Jaquar cat part No HSH CHR 1657 and equivalent in make of list as approved by GE |
| 60 | S & F CP jet spray for EWC with 1mtr long flexible stainless steel connecting pipe 15mm bore, fixed in repairs, complete all as specified and as directed. |
| 61 | S & F full pedestal pattern wash hand basin, size of basin 630mm x 510mm and pedestal of 900mm long colour as approved by GE including brakets , chromium plated brass waste coupling etc complete all as specified and as directed. |
| 62 | S&F fancy type chromium plated 15 mm dia stop cock/angle cock/ angle cock, cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flinch screwed both ends for iron or for union. |
| 63 | S&F in repairs 2-in-1 angle valve, fancy type, chromium plated brass, 15mm, complete all as directed. |
| 64 | S&F PVC connection 15 mm bore and 600mm long with washers complete all as specified and directed. |
| 65 | S&F fancy type chromium plated bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule |
| 66 | S&F fancy type chromium plated pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 67 | S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) |
| 68 | S&F Gun-metal globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron complete all as specified and directed. |
| 69 | S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and directed. |
| 70 | S&F fancy type SS 304 grade toilet paper holder, complete all as specified. |
| 71 | S&F CP towel rail 20mm dia and 600mm long fixed with and including chromium plated brass screws and and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified. |
| 72 | S & F 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood or looking mirror with cabinet (as directed at site by Engr in charge) and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 73 | S&F 1200mmx600mm or equivalent frameless modern mirror with bevelled edge selected quality glass, mounted on wall with SS stud screws complete in all respect as specified and directed by Engr-in-Charge. |
| 74 | S&F for Corner Glass Shelf (with Bracket) complete all as specified & directed. |
| 75 | S&F for Glass Shelf 600mm Long fancy type complete all as specified & directed. |
| 76 | S&F vitreous china one piece counter top wash basin, white, of size 410x410x160 mm / 570x420x195 mm / 615x415x150 mm including coupling, bottle trap/waste pipe complete all as specified and directed. |
| 77 | 16-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms,wash basin platform/dado/wall and like over 15mm thick cement mortar 1:4 including pointing in white cement mortar 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed |
| 78 | S & F PVC (SWR) 110 mm dia pipes single socketed in any length with rubber ring joints fixed to walls with iron band straps complete all as spd and as directed. |
| 79 | S & F PVC (SWR) 110 mm bends complete all as spd and as directed. |
| 80 | PVC (SWR) 110 mm dia junction single, (Single T) equal or unequal complete all as spd and as directed. |
| 81 | PVC (SWR) 110 mm dia junction double, (double T) equal or unequal complete all as spd and as directed. |
| 82 | PVC (SWR) 110 mm dia vent cowl complete all as spd and as directed. |
| 83 | S & F PVC (SWR) 75mm dia pipes single socketed in any length with rubber ring joints fixed to walls with iron band strap complete all as spd and as directed. |
| 84 | S & F PVC (SWR) 75mm dia pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as spd and as directed. |
| 85 | PVC (SWR) 75 mm bends any radius complete all as spd and as directed. |
| 86 | PVC (SWR) 75 mm dia junction single (Single T) equal or unequal complete all as spd and as directed. |
| 87 | M&L PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified. |
| 88 | S&F for stack iron clamps incl bolts and nuts and securing ends of stays to wall or roof for 75/100/110 mm bore of pipe complete all as specified and directed. |
| 89 | S&F factory made steel fibre reinforced (SFRC) man holes covers with frames incl necessary hold fast/hooks (medium duty) of 600 mm dia or rectangular of equivalent area complete all as specified. |
| 90 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 91 | M&L for PCC (1:2:4) Ty B-1 using 20mm graded stone aggregate as in coping, benching in mahole etc incl necessary form work, complete all as specified. |
| 92 | M & L 75 mm thick Cement concrete work as in plinth protection type C-1 , 1:3:6 (20mm graded aggregates) laid in alternative panels,with finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed |
| 93 | Material & Labour for applying Two coats of 100% Premium acrylic emulsion exterior weatherproof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 94 | M&L for preparation of newly plastered surfaces of wall and applying two coats of acrylic interior emulsion paint over one coat of primer and one coat of 1mm thick wall care putty complete all as specified and as directed. |
| 95 | M&L for preparation of newly plastered surfaces of ceiling and applying two coats of acrylic emulsion paint over one coat of primer and one coat of 1mm thick wall care putty complete all as specified and as directed. |
| 96 | S&F Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified. |
| 97 | S&F DWCPE (SN8) nominal size 150 mm (internal dia) mm including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and as directed. |
| 98 | M&L for PCC (1:3:6) Ty C-2 using 40mm graded stone aggregate as in bed to drain pipes of 150mm bore including packing under, and haunching against the sides of pipes after they are laid and tested; in |
| 99 | M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked drawing in PVC concealed conduit and PVC conduit fitting including drawing FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size with modular sheet for fixing modular switches/sockets/fan regulator etc complete all as directed |
| 100 | One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push. |
| 101 | One socket outlet point 5 amps on the same board. |
| 102 | Description all as per Srl Item No 99.00 here-in-before but with 4 sq mm FRLS copper wire with 4 Sqmm FRLS copper earth wire for independent point. |
| 103 | S&F Modular switch 6 Amp, 1 way, 1 module size complete all as directed.Make-Indoasian shynora/Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent. |
| 104 | S&F Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed.Make-Indoasian shynora/Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent. |
| 105 | S&F Modular switch 16 Amp, 1 way, 1 module size complete all as directed.Make-Indoasian shynora/Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent. |
| 106 | S&F Modular socket 16 Amp multipurpose shuttered type, 2 module size with indicator lamp complete all as directed.Make-Indoasian shynora/Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent. |
| 107 | S&F Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed. |
| 108 | S & F of LED batten luminaire surface mounted with aluminium housing & PC diffuser ,4 feet system wattage of 20 watts initial lumen maintained CRI>80,Power Factor >0.9,THD<20%, colour temperature-6500K, surge Protection 2.5 KV in CM, IP-20 protected,meets LED IS specified,Class-1, short circuit and over circuit protection ,voltage range -140 to 270 volts AC, temperature range 0 to 50 Degree C,system efficiency at luminaire level >120 Lumen/watts and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 109 | S & F of LED batten luminaire surface mounted with aluminium housing & PC diffuser ,2 feet system wattage of 10 watts not less than 1200 lm initial lumen maintained CRI>80, Power Factor >0.9, THD<20%, colour temperature-6500K, surge Protection 2.5 KV in CM,IP-20 protected, meets LED IS specified, Class-1, short circuit and over circuit protection ,voltage range -140 to 270 volts AC,temperature range 0 to 50 Degree C,system efficiency at luminaire level >120 Lumen/watts and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 110 | Supply and fix BLDC Ventilation fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm complete all as specified and directed. |
| 111 | S & F of MCB DB conforming to IP 43 - IK 09 with double door , SPN 8 way complete with din rail Neutral and earthing bar after taking out the oldunserviceable DBs connection and making good the disturbed surfaces complete all as specified and as directed. |
| 112 | S&F of MCB SP, 'B' Curve type, 10 KA, 10 to 32 Amp, with over load and short circuit protection complete all as directed. |
| 113 | S&F of MCB SPN 'B' Curve type, 10 KA, 63 Amp, with over load and short circuit protection complete all as directed. |
| 114 | Excavation in trenches in loose/soft soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out including forming bottom surface for laying LT cable as specified and directed at site by Engineer-in-Charge. |
| 115 | M&L for sand cushioning to under ground cable provided with layers of snad(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge. |
| 116 | Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site. |
| 117 | Removing exccavated soil not exceeding 50 mtr and depositing wheredirected at a level not exceeding 1.5 mtr above the starting point complete as specified and directed by the Engr-in-charge. |
| 118 | Supply, laying and testing XLPE insulated armoured heavy duty U/G aluminium conductor cable served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and overall PVC sheathed of size 10 Sqmm 2 core, complete all as specified and as directed. |
| 119 | Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender