Tender For Provn Of 50 M Road At Main Gate At Pachmarhi Mil Station
Tender Value
9.63 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
8 days left
EMD
19300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 50 M Road At Main Gate At Pachmarhi Mil Station
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and directed by Engineer-in charge. |
| 2 | Rolling and consolidation of formation surface in cutting with power roller exc 8-12 tonne complete all as specified and directed by Engineer-in charge. |
| 3 | M&L Moorum filling in pavings of road, laid in layers n.exc. 15cm thick spread, leveled and rammed including watering, complete all as specified and directed by Engineer-in charge. |
| 4 | M&L 150 mm thick (compacted thickness) Granular Sub base (compacted thickness) granular sub base course (GSB) Grade-V in a singlelayer as specified in Table 400-1 of Morth Specification for road and bridge works 2013 with natural sand,crushed gravel,crushed stone,crushed slag.The materials are mechanicaly mixed, spread and levelled on the subgrade by using motor grader of adequate capacity and rolling with vibrating roller complete all as specified and directed by Engineer-in charge. |
| 5 | M&L 150 mm thick (compacted thickness) wet Mix Macadam (WMM) in two layers each of 75 mm thickness as specified in Table 400-13 of Morth Specification for road and bridge works 2013 manufactured in WMM Plant, material comprising of clean,crushed,graded aggregate and granular material premixed with water to a dense mass,spreading with sensor paver and rolling with vibrating roller of capacity 80-100Kn static weight for achieving reqd density of 98% of max dry density, complete all as specified and directed by Engineer-in charge. |
| 6 | M&L for applying evenly a prime coat of Cationic Bitumen Emulsion SS1 confirming to IS: 8887 at a rate application of 0. 7-1 kg/sqm on surface of WMMIVVBM as specified in Table 500-3 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as specified and directed by Engineer-in charge. |
| 7 | M&L for premix bituminous, macadam using with paving bitumen of any penetration of consolidated thickness 50 mm with 4% binder content by weight of total mix, laid & rolled and compacted to required gradient and camber with 8 to 10 tonne power roller complete all as specified and directed by Engr-in-Charge. |
| 8 | M&L for semi dense bituminous premix asphaltic dense concrete with paving bitumen any penetration of consolidated thickness not less than 40mm with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient with 8 to 10 tonne power roller complete all as specified and directed by Engr-in-Charge. |
| 9 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed by Engineer-in charge. |
| 10 | S & F in repair ( CAT EYES) solar reflective type of metal body alloy of size 100mmx100mmx20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions fixing of CAT EYE shall be done by drilling hole on road and shall be fixed with resin based adhesive and nails.complete all as specified and directed by Engineer-in charge. |
| 11 | Supply and fixing in repairs Solar road studs aluminium alloy shall (100% water proofing design according to IP 65) of size 125mmx125mmx25mm (shank 65mm) of high efficiency Monocrystalline solar panel 2.4v/0.3 watt one NI-ed rechargeable battery (1.2v/1600MAH) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions etc. complete all as specified and directed by Engineer-in charge. |
| 12 | Material & Labour for road side kerb with factory made Precast cement concrete block of mix 1:3:6 type C-1 using 20 mm graded stone aggregate, not exc 100 mm in thickness & set in CM 1:4 complete all as specified and directed by Engineer-in charge. |
| 13 | M & L PCC 1:4:8 type D-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. complete all as specified and directed by Engineer-in-charge. |
| 14 | M & L sand filling under floors or interlocking tile or in foundation including watering and consolidation complete all as specified and directed by Engineer-in charge. |
| 15 | M & L machine pressed precast concrete 60 mm thick glossy interlocking paver block M-35 Grade to IS 15658-2006, with grey cement and pigment laid over dry sand cushioning, filling of joints with sand. Colour and shape approved by GE, complete all as specified and directed by Engineer-in-charge. (Note : Sand cushioning shall be measured and paid separately) . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender