Tender For Repair / Replacement Of Sanitary Fittings, Plumbing, Internal Water Supply, Sunken Treatment In Domestic And Tech Area And Cleaning And Maintenance Of Septic Tanks, Soakage Wells, Sewage Lines, Manholes And Misc Items At Af Stn Sarsawa Und
Tender Value
45.95 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
11 days left
EMD
91900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Saharanpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement Of Sanitary Fittings, Plumbing, Internal Water Supply, Sunken Treatment In Domestic And Tech Area And Cleaning And Maintenance Of Septic Tanks, Soakage Wells, Sewage Lines, Manholes And Misc Items At Af Stn Sarsawa Under Ge (Af) Sarsawa
BOQ
| Sl. No. | Item Description |
| 1 | Disconnecting & dewatering of PVC/RCC overhead taks, scrubbing the inner surfaces, cleaning & removing all scales, dirt etc from mouth of circulating pipes, washing the tanks with fresh water and disinfecting the same by flushing with liquid chlorine or any other equivalent chemical, reconnecting & refixing in position after cleaning for tank capacity not exc 500 ltrs each including marking the date of cleaning with white paint and stencil as required complete all as specified and directed.Note: Cleaning shall be done through wash out pipe by marking suitable arrangement to the outlet pipe such as cutting of the pipe providing short piece of pipe fitting and union coupling etc where the wash out pipe are not existing. The dirt etc shall not be allowed to enter the water supply system. |
| 2 | All as per Item No 2.00 here-in-above but exc 500 ltr and not exc 1000 ltrs capacity complete all as specified and directed. |
| 3 | S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/laid in trenches including removing the old pipes and making good the disturbed surface as per existing complete all as specified and directed. |
| 4 | All as per Item No 3.00 here-in-above but for floors complete all as specified and directed. |
| 5 | S & F in repair 80 mm bore PVC (SWR) single junction (single 'T' ) equal or unequal provided with access door complete all as specified and directed. |
| 6 | S & F in repair 80mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 7 | S & F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls/spout pipes including removing the old pipes and making good the disturbed surface as per existing complete all as specified and directed. |
| 8 | All as per Item No 7.00 here-in-above but for floors complete all as specified and directed. |
| 9 | S & F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 10 | S & F in repair 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 11 | S & F in repair 110 mm bore PVC (SWR) single junction (single 'T' ) equal or unequal provided with access door complete all as specified and directed. |
| 12 | Taking down cement plaster or other existing treatment from sunken floors, cleaning the surface with wire brushes, brooms etc and finally washing down the area to be treated and M & L for treating the sunken floors and adjoining vertical surfaces as under complete all as specified and directed:- (a) Plastering 15 mm in cement mortar (1:3) mixed with liquid type water proofing compound to sunken floors and adjoining vertical surfaces. Surface shall be cured & allowed to dry.(b) Applying Ist layer of cement slurry by brush@ 0.488 Kg per Sqm mixed with acrylic based polymer modified cementeous compound of Dr Fixit @ .253 Kg per Sqm complete as per manufacture instructions.(c) Applying 2nd layer of cement slurry by brush@ 0.488 Kg per Sqm mixed with acrylic based polymer modified cementeous compound of Dr Fixit @ .253 Kd per Sqm complete as per manufacture instructions. (c) Testing the sunken floor for water tightness by ponding water for 72 Hours. (d) Fixing of 32mm dia GI pipe medium grade spout projecting 23 cm beyond wall, one number in each sunken portion. |
| 13 | Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 14 | Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 15 | S & F in repair steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified and directed. |
| 16 | S & F in repair 20mm GI tubing Medium grade fix to wall/floor fixed complete all as specified and directed. |
| 17 | S & F in repairs 15/20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed , minimum weight - 210 gms of including taking down existing ball valves any type complete all as specified and directed. |
| 18 | S & F in repair Vitreous china wash down water closet pan “Pedestal Pattern” white, with seat white closed pattern with flat bottom and cover mild steel chromium plated or aluminium anodized hinging device including flush pipe and joints etc and connection to drain, flushing, pipe, anti-syphonage pipe and fixing arrangements with fixing bolts etc including making good the disturbed portion of floor in cement concrete (1:2:4) type (B-0) as complete all as specified and directed. |
| 19 | S & F in repair Vitreous China squatting pan “Orissa ” pattern size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe ) fixed in repairs, including connecting to trap and to flushing pipe, etc including making good to dismantled portion of floors with PCC (1:2:4) type B-0 complete all as specified and directed. |
| 20 | S & F in repairs Vitreous China Wash Hand Basin, white, flat back, size 550x 400 mm including PVC waste pipe 32 mm bore and CP waste coupling, chain and plug and porcelain stopper including mild steel brackets, made out of 25 x 25 x 3 mm thick angle iron of required lenght, fixed to wall with PCC type B-0), fixed including cutting for a pinning in a brackets complete all as specified and directed. |
| 21 | S & F in repairs Vitreous China Wash Hand Basin, white, flat back, size 630x 450 mm including PVC waste pipe 32 mm bore and CP waste coupling, chain and plug and porcelain stopper including mild steel brackets, made out of 25 x 25 x 3 mm thick angle iron of required lenght, fixed to wall with PCC type B-0), fixed including cutting for a pinning in a brackets complete all as specified and directed. |
| 22 | S & F 32mm dia waste fitting (waste coupling) brass chromium plated for glazed ware sink, basin etc with long screwed shanks and fly nuts flange complete all as specified and directed. |
| 23 | S & F in repair 32mm dia waste fitting (waste coupling) brass chromium plated for glazed ware sink, basin etc with long screwed shanks and fly nuts flangecomplete all as specified and directed. |
| 24 | S & F in repair Jet spray chromium plated brass for EWC with & including PVC connection1mtr long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete all as specified and directed. |
| 25 | S & F in repair valve less symphonic action type , PVC low level flushing cistern 10 litres capacity, white, with inlet, ball valve, flot and handle including PVC flush pipe 32 mm bore and mild steel brackets made out of 25 by 25 by 3 mm thick angle iron of required length fixed to wall with PCC type B-0 (1:2:4), complete all as specified including taking down HL/LL PVC or Viterous China flushing cistern and making good the disturbed surfaces in cement mortar (1:3) complete all as specified and directed. |
| 26 | S & F in repairs PVC connection of 15mm bore with 2 Nos. PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe complete all as specified and directed. |
| 27 | S & F in repairs PVC internal fittings (kit) complete for low level flushing cistern tank, complete all as specified and directed. |
| 28 | S & F in repair Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges, brass chromium plated, fixed complete all as specified and directed. |
| 29 | S & F in repair Brass chromium plated towel rack 24 \\" long, fixed in position with steel screws complete all as specified and directed. |
| 30 | S & F in repair Plastic water closet seat cover White, closed pattern with flat bottom, and mild steel chromium plated or aluminium anodized hinging device, complete all as specified and directed. |
| 31 | S & F in repairs of spindles, phases of brass of any size required for bib taps, pillar cocks, stop cocks, angle valves, concealed valves complete all as specified and directed. |
| 32 | S & F in repairs MS grating CP 100mm dia, with hole/without for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as specified and directed. |
| 33 | S & F in repairs Pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified and directed. |
| 34 | S & F Pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified and directed. |
| 35 | S & F in repairs Pillar tap, of PTMT any colour, high pressure, screwed for iron pipes of 15mm bore (Min wt 110 gms) complete all as specified and directed. |
| 36 | S & F in repairs fancy type center hole basin mixer without popup waste system but including plain waste 32 mm size with aerator complete cast copper alloy, chromium plated, scrwed downhigh pressure, with long scrwed shanks & fly nuts scrwed for iron pipes of 15 mm bore complete all as specified and directed. |
| 37 | S & F in repairs brass chromium plated WHB mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore complete all as specified and directed. |
| 38 | S & F in repairs brass chromium plated telephonic hand shower with 1.50m long stainless steel braided flexible tube with nut & nipple & hook suitable for wall mixer & screwed down for iron pipe of 15mm bore complete all as specified and directed. |
| 39 | S & F in repairs brass chromium plated shower rose 125mmx125mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified and directed. |
| 40 | S & F in repair shower rose, PVC suitable for 15mm bore pipe with swiveling joints complete all as specified and directed. |
| 41 | S & F in repairs looking mirror 600x450mm bevelled edge 5.5mm thick selected quality glass, mounted on 6mm thick commercial ply, aluminium frame around and fixed to wooden plug with CP brass screws and cup washeres complete all as specified and directed. |
| 42 | S & F in repair bib tap cast copper alloy with crutch or butter fly handle 15mm bore chromium plated fixed complete all as specified and directed. |
| 43 | S & F bib tap standard of PTMT any colour 15mm bore high pressurescrewed for iron pipe fixed in repair(Min. wt 90 gms) complete all as specified and directed. |
| 44 | S & F in repair Stop valves, 15mm bore cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 45 | S & F in repair Angle Stop valves, cast copper alloy chromium plated screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for unions suitable for 15 mm bore tubes complete all as specified and directed. |
| 46 | S & F in repair 20mm bore Stop valves, cast copper alloy screwed down high presure, screwed both ends for iron pipe or for unions fixed complete all as specified and directed. |
| 47 | S & F in repair vitreous bowl urinal flat back,size of 465 x 355 x 265mm white(minimum),including waste coupling and waste pipe with grating ,Spreader with connection and union for discharge pipe complete all as specified and directed. |
| 48 | S & F in repair Stop valve of 15 mm dia PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. |
| 49 | S & F in repair chromium plated Brass health faucet for EWC with including PVC Connection 1m long suitable for 15mm bore with all connected fittings as approved complete all as specified and directed. |
| 50 | S & F in repairs 32/40mm dia PVC flexible waste pipe 80cm long with socket for union, for WHB/urinal/sink ccomplete all as specified and directed. |
| 51 | S & F in repairs wall mixer chromium plated (3 in -1) with arrangement for both telephonic shower and overhead shower with 220 mm max long bend pipe with hand shower of size 100 x 55 mm with 130 mm long arm & 1.2 m house pipe complete all as specified and directed. |
| 52 | S & F in repairs wall mixer chromium plated (2 in -1) with arrangement for overhead shower with 220 mm max long bend pipe including over head shower etc complete all as specified and directed. |
| 53 | S & F in repairs glass corner shelf complete all as specified and directed. |
| 54 | S & F in repairs glass shelf rectangular type complete all as specified and directed. |
| 55 | S & F in repair 2-in-1 CP bib cock complete all as specified and directed. |
| 56 | S & F in repair 2 way CP angle cock complete all as specified and directed. |
| 57 | S & F in repairs cover for rotational moulded polyethylene water storage tanks of any capacity complete all as specified and directed. |
| 58 | S & F in repairs Sink Coupling including PVC flexible waste pipe 80cm long with socket for union complete all as specified and directed. |
| 59 | S & F in repairs vitreous china counter top/down basin size 450 x 525 x 195 mm shape oval including 32 mm CP waste coupling & PVC flexible waste pipe of 90 cm long complete all as specified and directed. |
| 60 | S & F in repairs vitreous china wash down water closet pan (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified and directed. |
| 61 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 62 | M & L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra complete all as specified and directed. |
| 63 | M & L for rendering 15mm thick in cement mortar (1:4) on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound ( water proof compound paid seperatly) complete all as specified and directed. |
| 64 | M & L for rendering 5mm thick in cement mortar (1:4) on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed. |
| 65 | M & L for preparation of new plastered surfaces of walls and applying one coats of Oil bound distemper over a coat of 1mm thick wall care putty of approved tint complete all as specified and directed. |
| 66 | M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 67 | M & L for preparation of newly plastered surface of walls & applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 68 | M & L for preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified and directed. |
| 69 | M & L for preparation of newly plastered/unplastered surfaces of ceilings & applying two coats of oil bound distemper (OBD) complete all as specified and directed. |
| 70 | S & F in repairs powder coated stainless steel drapery rod of 25 mm inner dia (in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C complete all as specified and directed. |
| 71 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but ot backing) , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 72 | M & L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar (1:4) complete all as specified and directed. |
| 73 | M & L Glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cement mortar (1:4) complete all as specified and directed. |
| 74 | M & L Glazed ceramic coloured tiles in vertical surface 300x200X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cement mortar (1:4) complete all as specified and directed. |
| 75 | M & L for 18/19mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed cement mortar (1:6) complete all as specified and directed. |
| 76 | M & L kota stone slab 10-15 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over rendering back of tile 10 mm cement mortar (1:4) complete all as specified and directed. |
| 77 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area complete all as specified and directed. |
| 78 | M & L for 25 thick cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles complete all as specified and directed. |
| 79 | M & L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) complete all as specified and directed. |
| 80 | M & L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) complete all as specified and directed. |
| 81 | M & L machine cut kota stone slab flooring 20-25mm thick and area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over screed bed 15mm thick (1:6) cement mortar complete all as specified and directed. |
| 82 | M & L for 50 mm thick PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in plinth protection surface finished fair and even complete all as specified and directed.Note :- Plinth protection shall be laid to slope (1 in 30) in bays not exceeding 3 metre in length and joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with sealing compound grade B. |
| 83 | Dismantling of cement concrete (un-reinforced) kerb stone and the like of any description of and in any position not otherwise specially provided for complete all as specified and directed. |
| 84 | M & L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar (1:3) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 85 | Demolition/Removal of existing RCC water tank including cover (Capacity not exc. 1000 Ltr) placed on roof of the Bldgs/Quarters including removal of their staging/platform complete all as specified and directed.Note : (i) Tank/staging shall be taken down after demolition in small pieces.(ii) Demolition shall be carried out carefully without damaging roof treatment.(iii) Roof treatment came out/damaged during demolition shall be made good with same specification without any extra cost.(iv) Small trees/Plantation near the tank shall be uprooted and roof treatment shall be made good. |
| 86 | M & L for brick work placed on roof of the Bldgs/Quarters for water tank plarform with sub class brick (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 87 | M & L for rendering 15mm thick in cement mortar (1:4) on stone wall surfaces fair faces of brick work & surfaces finished even and smooth without using extra cement mixed with water proof compound (water proof compound paid seperatly) complete all as specified and directed. |
| 88 | Supply only integral liquid water proofing compound (ISI marked) complete all as specified and directed. |
| 89 | S & F in repair Rotational moulded polyethylene water storage tanks of capacity 500 Litre double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc as specified in SSR Part-I complete all as specified and directed. |
| 90 | All as per Item No 89.00 here-in-above but capacity of tank 1000 Litre complete all as specified and directed. |
| 91 | S & F Ball valves, high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball, screwed for iron pipe 15/20mm dia (minimum weight 142/210 gms) complete all as specified and directed. |
| 92 | Cleaning of Sewage line of 100mm bore from gully traps, grease traps etc. upto 1.5 m deep by removing all filtn/silt, foreign materials and other deposits whatsoever completely and making the line free from all obstacles and testing the flow of sewer line evenly, smoothly by filling water. The cleaning operation will be carried out in suitable lengths by blocking the first and last manholes of sewage line and removing the silt/sludge & other deposits out side of MD land in covered van/trolley complete all as specified and directed. |
| 93 | All as per Item No 92.00 here-in-above but for sewage line of 150 mm bore and depth of sewage line upto 2m complete all as specified and directed. |
| 94 | All as per Item No 92.00 here-in-above but for sewage line of 200 mm bore and depth of sewage line upto 3m complete all as specified and directed. |
| 95 | Cleaning of septic tank of any capacity or description including cleaning and pumping out fluid, cleaning of sludge from compartment of septic tank including intercepting chamber & washing down with water complete and removing the sludge in covered van/trolley out side the MD land, complete all as specified and directed. |
| 96 | Removing/cleaning of oxidation pond for dead leaves/ branches, any type of growth vegetation etc. by any suitable means and cutting down bushes green vegetation, surbs etc in surrounding area upto the 3.00 mtr from the outer PCC path ways of the oxidation pond size of oxidation pond at top on 55.00 metre by 32.50 metre complete all as specified and directed. |
| 97 | All as per Item No 96.00 here-in-above but size 53.00 metre x 32.00 metre Dewatering & taking out sludge can be done as and when required & on essential basis, to avoid health hazard complete all as specified and directed. |
| 98 | M & L dewatering of soak well by pumping or any suitable means dia of soak well exceeding 2.50 m and n. exc 3.00 and depth not exc 3.00 complete all as specified and directed. |
| 99 | Cleaning of manholes depth upto 1.5 mtr by removing all silt, sludge, any other materials making clean and flushing with water complete incuding removal of spoils out side MD land and taken out cover slab and reset in the same position after cleaning and testing all as specified and directed. cleaning shall be done either manually or mechanically as required complete all as specified and directed. |
| 100 | All as per Item No 99.00 here-in-before but depth exceeding 1.5 m and not exc 3 m deep complete all as specified and directed. |
| 101 | Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified and directed. |
| 102 | M & L for Brickwork with subclass ‘B’ bricks, (OLD SIZE BRICKS) straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 103 | All as per Item No 102.00 here-in-above but except bricks complete all as specified and directed. |
| 104 | Demolition of Brickwork or stone/ boulder masonry, laid dry and removal complete all as specified and directed. |
| 105 | M & L for PCC (1:3:6) type C1 (using 20 mm gradded stone aggregates) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, drain channels, copings,parapets copings, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed. |
| 106 | M&L for cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and directed.Note: Forming fair finished channel for drain using extra cement shall be measured and paid for separately. |
| 107 | M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick masonry or concrete surfaces of walls, mixed with water proofing admixture (ISI marked), finished even & smooth without using extra cement complete all as specified and directed.Note: Supply only water proofing admixture shall be measured and paid for separately. |
| 108 | Demolition of reinforced cement concrete as in cover/slab of drain/culvert/septic tank/soakage well complete all as specified and directed. |
| 109 | M & L for providing and laying 75mm thick for precast SFRC drain cover without frame but including complete sides iron sheets (medium ) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 5 ton /Sqm in square or rectangular shape complete all as specified and directed. |
| 110 | M & L for providing and laying 50mm thick for precast SFRC drain cover without frame but including complete sides iron sheets (medium ) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 2 to 3 ton /Sqm in square or rectangular shape complete all as specified and directed. |
| 111 | Demolition and breaking up drain pipes 150 mm dia (salt glazed ware AC or reinforcement concrete set in cement mortar complete all as specified and directed. |
| 112 | M & L 150 mm Salt glazed stonware pipe laid and jointed complete with collars complete all as specified and directed. |
| 113 | M & L 150 mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 114 | M & L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) for 150 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete all as specified and directed. |
| 115 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed. |
| 116 | All as per Item No 115.00 here-in-above exc 1.5 m deep and n.exc 3 m deep complete all as specified and directed. |
| 117 | M & L cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 118 | Returning filling in including spreading, levelling watering and well ramming in layers not exc. 25 cm using excavated soil complete all as specified and directed. |
| 119 | Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 120 | M & L for 150mm dia Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished, and reforming benching as required complete all as specified and directed. |
| 121 | Dismantling of old PVC (SWR) pipes any type & any size complete all as specified and directed. |
| 122 | S & F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors including dismantling old u/s pipe complete all as specified and directed. |
| 123 | S & F in repair 150x150mm Salt-glazed stoneware gully traps, square or round mouthed, type `P' all as complete all as specified and directed. |
| 124 | S & F in repair CI spun pipe 75 mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including jointing etc and including old u/s dismentling pipes complete all as specified and directed. |
| 125 | S & F in repair CI spun pipe 100mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including jointing etc and including old u/s dismentling pipes complete all as specified and directed. |
| 126 | S & F in repair CI spun pipe 75mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall including jointing etc and including old u/s dismentling pipes complete all as specified and directed. |
| 127 | S & F in repair CI spun pipe 100mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall including jointing etc and including old u/s dismentling pipes complete all as specified and directed. |
| 128 | S & F in repairs CI junction for 75mm bore CI pipe including jointing complete all as specified and directed. |
| 129 | S & F in repair CI juction for 100mm pipe including jointing complete all as specified and directed. |
| 130 | S & F in repair CI bend for 75mm pipe including jointing complete all as specified and directed. |
| 131 | S & F in repair CI bend for 100mm pipe including jointing complete all as specified and directed. |
| 132 | Demolition of cement concrete (un-renforced) in ground floor and paving. exc. 15 cm thickness (below or above ground level.) & removal of rubbish material complete all as specified and directed. |
| 133 | M & L for 100 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 134 | M & L for providing and laying prepolished cement concrete Chequered tiles 30cmx30cmx25mm thick, with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape heavy duty , set,jointed and pointed in neat cement slurry in floors over screed bed 15mm thick (1:6) cement mortar complete all as specified and directed. |
| 135 | M & L for poviding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 136 | M & L for 75 mm thick PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in plinth protection surface finished fair and even complete all as specified and directed. Note :- Plinth protection shall be laid to slope (1 in 30) in bays not exceeding 3 metre in length and joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with sealing compound grade B. |
| 137 | M & L for PCC Type C-2 (1:3:6) (using 40 mm graded stone aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender