Tender For Periodical Services With Smart Periodical Methodology To Internal And External Surfaces Of Buildings At Maru Vihar At Af Station Suratgarh
Tender Value
45 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
10 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services With Smart Periodical Methodology To Internal And External Surfaces Of Buildings At Maru Vihar At Af Station Suratgarh
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Aug-2026 | Corrigendum_01 | BOQ | 02-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | BOQ (PERIODICAL SERVICES WITH SMART PERIODICAL METHODOLOGY TO INTERNAL AND EXTERNAL SURFACES OF BUILDINGS AT MARU VIHAR AT AF STATION SURATGARH) |
| 2 | Demolition of cement concrete (un-reinforced ) of any description in ground floors and paving not exceeding 15 cm thick (below or above the ground level) and removing rubbish from the premises. complete all as specified and directed. |
| 3 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site complete all as specified and direcetd. |
| 4 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each and removing from site complete all as specified and direcetd. |
| 5 | M&L factory made Pressed steel frames of size 105mmx60mm made of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified. |
| 6 | M&L factory made Pressed steel frames of size 125mmx60mm made of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified. |
| 7 | S&F factory made 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkatsNote: Glass/wire gauge shall be measured and paid for seperately. |
| 8 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified. |
| 9 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification. |
| 10 | S&F butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified. |
| 11 | S&F Aluminum handles, 150 mm size cast type complete all as specified and directed. |
| 12 | S&F aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified. |
| 13 | S&F aluminium alloy, 16mm dia and 250mm long anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, complete all as specified. |
| 14 | S&F galvanised Steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed. |
| 15 | M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each panes as specified. |
| 16 | S&F stainless steel 20 mm dia curtain rod thickness of pipe not less than 1.0 mm including stainless steel brackets and stainless steel end knobs fixed with plugs & screws, complete all as specified and directed. |
| 17 | S&F of 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type back side and one face is covered with decorative face veneer with lipping/frame to match, fitted to chowkats complete all as specified and directed by Engr-in-Charge. |
| 18 | S& F factory made box type glazed and gauged steel window/ventilator made out of ERW hollow P&T section 50 x 25 mm . Both window to be welded together with flat iron 25x3mm to outer frames on both sides complete all as specified including MS grill complete and including shop coat redoxide primer with following fittings welded to frame/shutter:-(a) Hold fast 150mm long 25mmx6mm iron made to shape-02 Nos in each window (both sides)(b) Handle of 'Z' section 20mmx25mm Each leaf(c) 100mm stopper-01 No per leaf.(d) MS tower bolt 150mm long - 02 Nos in each leaf.(e) Cleat 55mm long of hollow square 15mm x 15mm x 24mm welded to hinges gauze wall thickness welded to hinges of 50mm size-01 No per leaf.(f) MS box type hinges of size 75x12mm-03 Nos per leaf(g) Fabrication & fixing complete(h) Flat iron for fixing wire gauge to gauge window Glass pane, wire gauge work complete.Note:- (i) Glass panes, wire gauze and painting shall be measured & paid Separately under respectiveii) Design shall be got approved from the Engineer-in-charge |
| 19 | Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key, scrubbing down with water and removing rubbish from the premises etc. complete all as specified and directed. |
| 20 | M&L for 12 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as on wall complete all as specified and directed. |
| 21 | Material and labour for 15 mm thick rendering in cement mortar 1:4 mixed with approved water proofing compound on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement all as specified and directed.Note: Water proofing compound shall be measured and paid separately.. |
| 22 | M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of roof projection/ ceiling and surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 23 | M&L for rough cast plaster with a mixture consisting of crushed stone or fine gravel aggregate of size 6mm to 8mm as directed, mixed with coarse sand, fine sand and cement in the ratio of 1:1:1, finished even rendereing with under coat 15mm thick cement and sand mortar 1:3 complete all as specified and directed |
| 24 | M&L for complete removal of existing treatment from wall surfaces and applying two coats of oil emulsion distemper over 1.5 mm thick JK/Birla wall care putty to achieve smooth finish surface, complete all as specified and directed. |
| 25 | M&L for prepration of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 26 | M&L for preparation of old plastered wall surfaces and applying two coats of oil emulsion distemper, complete all as specified and directed. |
| 27 | M&L for Preparation of old painted wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge. |
| 28 | M&L for Preparation of old painted steel surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge. |
| 29 | M&L for prepration of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 30 | M&L for preparation of old plastered surfaces of ceiling and applying one coat of white wash all as specified & directed by Engineer-in- Charge. |
| 31 | M&L for applying two coats of oil bound distemper and including 1-1.5mm thick putty over newly prepared painted wall using Airless spray technology with max working pressure of 3300 PSI and capabale of operating single spray gun with a max material hose length of 100 ft.Note : The Spray machine should be of reputed manufacturer i.e. Asian/Berger or other equivalent manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spary in hard-to-reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 32 | M&L for applying two coat water based premium acrylic smooth exterior emulsion paint over the newly prepared wall surface of approved colour with silicon additives, with heat Reflectant property and gives excellent protection against UV attack with VOC less than 50 gram/litre as per the LEEDS specifications, Anti Algae properties in two coats diluted with water as per manufacturer instructions applied over priming coat with airless spray machine of paint application with a flow rate of 2L per minute having a pressure of 3300 PSI.Note : Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. |
| 33 | M&L for applying two coats of white wash over newly prepared ceiling surface using Airless spray technology with max working pressure of 3300 PSI and capabale of operating single spray gun with a max material hose length of 100 ft.Note : The Spray machine should be of reputed manufacturer i.e. Asian/Berger or other equivalent manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spary in hard-to-reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 34 | M&L for applying two coats of oil bound distemper over old painted wall surface using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 100 ft.after removal of existing treatment on walls etc by scraping and sanding with mechanical wall sander (having mechanical vacuum mechanism with dust carrying bag) having RPM not less than 1500, sanding pad of diameter of 7\\"/9\\" using a 80 grit sanding paper to make the surface free from dust, loose paint etc by skilled labour complete all as directed.Note : The Spray machine should be of reputed manufacturer i.e. Asian/Berger or other equivalent manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spary in hard-to-reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 35 | M&L for applying two coat water based premium acrylic smooth exterior emulsion paint over the old painted wall surface of approved colour with silicon additives, with heat Reflectant property and gives excellent protection against UV attack with VOC less than 50 gram/litre as per the LEEDS specifications, Anti Algae properties in two coats diluted with water as per manufacturer instructions applied over priming coat with airless spray machine of paint application with a flow rate of 2L per minute having a pressure of 3300 PSI. after removal of existing treatment on walls etc by scraping and sanding with mechanical wall sander (having mechanical vacuum mechanism with dust carrying bag) having RPM not less than 1500, sanding pad of diameter of 7\\"/9\\" using a 80 grit sanding paper to make the surface free from dust, loose paint etc by skilled labour complete all as directed.Note : Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. |
| 36 | M&L for for prepration of old plastered or unplastered wall etc by scraping and sanding with mechanical wall sander (having mechanical vacuum mechanism with dust carrying bag) having RPM not less than 1500, sanding pad of diameter of 7\\"/9\\" using a 80 grit sanding paper to make the surface free from dust, loose paint etc by skilled labour complete all as directed. applying two coat water based premium acrylic smooth exterior emulsion paint over the old painted wall surface of approved colour with silicon additives, with heat Reflectant property and gives excellent protection against UV attack with VOC less than 50 gram/litre as per the LEEDS specifications, Anti Algae properties in two coats diluted with water as per manufacturer instructions applied over waterproof cement based putty @ 1kg (undiluted) per sq mtr. Of average thickness 1-1.5 mm over the plastered/fold painted wall by skilled labour as per following steps :-Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltr per minutes with a maximum pressure 3300 PSIStep 3) Allow 6-8 hrs time to dry the putty surfaceNote : Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. |
| 37 | S&F as in replacement Rotational moulded plythelene white water storage tank tripple layered white coloured, 1000 litres capacity (cylinderical vertical with cxlosed top) hoisted with thread tank cover and fixed in position including GI tank nipple & with union(two nos each), including 20mm for ball valve brass high pressure, with polythene float and fly nut complete all as specified and directed. |
| 38 | Supply only Integral waterproofing compound.complete all as specified and directed |
| 39 | S&F as in replacement 12 mm thick toughned glass for door with proper grinding and rounding of edges , incl two no of stainless steel handle in each leaf ,handle size 45cm and 25mm dia. With lockin arrangement,hydraulic machine at the bottom for each door and pivots as per manufacture instruction,complete all as specfied and as directed . |
| 40 | M&L for Plain cement concrete 1:2:4 type B-I (20mm graded stone aggregate) 50 mm thick as flooring finished, complete all as specified and directed by Engineer-in-Charge |
| 41 | M&L 75mm cement concrete (1:3:6) Type C2 , 40 mm stone graded agg as in plinth protection, finished even and smooth w/o using extra cement. complete all as specified and directed. |
| 42 | M&L for applying two coats of oil bound distemper over old ceiling surface using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 100 ft. after removal of existing treatment on ceilings etc by scraping and sanding with mechanical wall sander (having mechanical vacuum mechanism with dust carrying bag) having RPM not less than 1500, sanding pad of diameter of 7\\"/9\\" using a 80 grit sanding paper to make the surface free from dust, loose paint etc by skilled labour complete all as directed.Note : The Spray machine should be of reputed manufacturer i.e. Asian/Berger or other equivalent manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spary in hard-to-reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 43 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness with grid of any type and pattern including cover fillets and removing from site complete all as specified and directed by engr-in Charge. |
| 44 | S&F 12 mm thick plain gypsum board flase ceiling with GI frame work incl all necessary drilling, cutting to fix electrical items complete all as specified and directed with floowing:(a) GI sheet channel 30x25x20mm of 24 Gauge fixed with rawl plug and screws 450 mm centre to centre along with perimeter of wall.(b) GI sheet channelmade to shape 50x40x40mm of 24 Gauge placed @ 600 mm centre to centre from perimeter of wall except long wall (in one span)(c) GI sheet intermediate runners of size 45x10x10mm of 24 Gauge fixed @ 1200 mm centre to centre leaving frame of one side wall (in other span)(d) GI sheet 25mm wide & 20 mm gauge suspenders fixed with steel fasteners to roof, ceiling @ 1200 mm centre to centre incl plugging in RCC slab. |
| 45 | S&F PVC Wall lining louvers consisting of 8mm thick Plain/ colour PVC sheet inclusive of solvent cement and fixing at site complete all as specified & directed by Engr -in charge. |
| 46 | Re-writing /repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white base synthetic enamel paint complete all as specified and directed. |
| 47 | M&L for 16-18 mm dholpur stone cladding gang saw cut with machine cut edges , uniform colour of each stone size not exceeding 0.25 Sqm fixed with and including making v groove at top and bottom of stone and drilling hole for hold fastener/ fixing with CM , 1:3 polishing , rubbing & including silicon treatment , complete all as specified and as directed. |
| 48 | Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 02, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender