Tender For Provision Of Certain Revenue Work (Mr-01) At Air Force Station Mullanpur Under Age (I) Highground
Tender Value
9.65 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
7 days left
EMD
19300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Certain Revenue Work (Mr-01) At Air Force Station Mullanpur Under Age (I) Highground
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Installation, Testing and commissioning of Grease separator made of polyethylene as per DIN EN 1825; proven Stability of 50 years; for below groundinstallation; overall dia of 1320 mm.; with ventilation provision; emptying via suction line DN 65 PN 10; counter flange with fire hose quick coupling 75B and 2.5\\" blank cap and satisfy reaction to fire Class A . Standard odour tight top cover of 600 mm dia. clear opening; frame made of concrete material and cover made of cast iron; with raising tube, load class B125 according to EN 124 (Note:- Item rate includes excavation,returning, filling and removal of surplus soil out of MOD land and providing base concrete surface 150 mm thick in cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate complete all as specified and directed.)a) Inlet and outlet dia: DN 150b) Model: Lipumax PDc) Nominal Size: NS 7d) Grease Storage: 285L, Sludge Storage: 730L, Overall Capacity: 1675LMAKE: ACO MODEL: Lipumax PD NS 7 or equivalent model of make Saniflo/Kingpan Klargster as approved by Accepting officer in writing. (Note:- Item rate includes excavation,returning, filling and removal of surplus soil out of MOD land) |
| 2 | Cutting in to existing manholes for connecting new drains 150mm dia ,making good to pipe & rendering ,cutting out existing benching for & forming branch channel (1/2 round and 3/4 section ) in cement concrete 1:2:4 typeB-1 smooth finished and reforming benching as required. |
| 3 | Material and Labour for excavating in trenches ,exceeding 1.5 mm wide and not exceeding 1.5mm depth ;for foundation etc or for shafts, wells, cesspits, manholes, pireholes, etc not exceeding 10 sqm on plan and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 4 | Removal of surplus excavated soil to a distance exceeding 200 metre but not exceeding 500 metre and depositing where directed, complete all as specified and directed. |
| 5 | Returning, filling in trenches (soil), including spreading, leveling and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed. |
| 6 | Material and labour for Concrete bed to 150 mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, in PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregates complete all as specified and directed. |
| 7 | Material and labour for for 150mm reinforced concrete pipes, class NP2 laid in trenches and jointed with collars complete all as specified and directed. |
| 8 | Material and labour for brickwork with using subclass 'B' old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:4), complete all as specified and directed. |
| 9 | Material and labour for cement concrete (1:2:4) type B-2 using 40mm graded crushed stone aggregate as in surface channel and drian complete all as specified and directed |
| 10 | Material and Labour for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms ,moulds mitred/stopped ends etc complete all as specified and directed. |
| 11 | Material and Labour for rendering 15mm thick on bricks /stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) mixed with water proofing compound 3% by weight of cement finished even and smooth without using extra cement (Water proofing compound should be measured and paid seprately) complete all as specified and directed. |
| 12 | Material and labour for for PCC 1:4:8 type D-2 (40mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 13 | Supply only Integeral waterproofing compound complete all as specified and directed. |
| 14 | Material and Labour for Reinforced Cement Concrete (nominal mix) type B-1 1:2:4 (20 mm graded aggregate) slab supported on walls, beams and columns in floors, roof, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 15 | Supply and Fix Mild steel TMT bars 10 mm dia and over cut to length ,bent to shape required ,including cracking bending etc., and binding with and including mild steel wire (annealed) not less than 0.9 mm dia and securing with clips, complete all as specified and directed. |
| 16 | Material and Labour for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and as directed. |
| 17 | Material and Labour for formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concretewalls, floor and roofs not exceeding 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide complete all as specified and directed. |
| 18 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for and remove all the debris out of MoD land complete all as specified and as directed. |
| 19 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified & directed. |
| 20 | Note: The total amount shall subject to adjustment of credit of Rs 460.00 for old Materials as per Schedule of Credit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender