Tender For Repair/ Maintenance Of Fencing, Footpath Hard Standing Concertina Coil, Drains, Sign Boards Etc At Af Stn Dinjan Under Ge (Af) Mohanbari
Tender Value
20 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
4 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dibrugarh → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Fencing, Footpath Hard Standing Concertina Coil, Drains, Sign Boards Etc At Af Stn Dinjan Under Ge (Af) Mohanbari
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick work (laid flat or on edge) in floors, channels kerbs aprons etc laid dry and pointed in cement mortar complete including removing of materials obtained from demolition from worksite to outside MD land at any distance complete all as specified and directed. |
| 2 | M&L for Brick work with well burnt bricks having crushing strength 75kg/sqcm laid flat in floor/tappered wall of drain, bedded & jointed in cm1:6 and pointed in pointed in cement mortar (1:6) using old size bricks complete all as specified and directed. |
| 3 | All as per item No 2 above but except Bricks complete all as specified and directed. |
| 4 | M&L for Brick work with well burnt bricks having crushing strength 75 kg/sqcm laid on edge in floors/ tappered wall of drain, bedded & jointed in cm 1:6 and pointed in cement mortar (1:6) using old size bricks complete all as specified and directed. |
| 5 | All as per item No 4 above but except Bricks complete all as specified and directed. |
| 6 | Demolition of brick work built in cement mortar etc complete all as specified including removing of materials obtained from demolition from worksite to outside MD land at any distance complete all as specified and directed. |
| 7 | M&L for brick work built in cement mortar 1:4 with well burnt bricks having crushing strength 75 Kg/sqcm straight or curved on plan exc 6 m mean radius etc complete all as specified and directed. |
| 8 | Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. including removing of rubbish material from work site complete all as specified and directed. |
| 9 | M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 10 | M&L for applying two coats of cement base paint over one coat of cement base primer on newly plastered wall surface including preparation of surface etc complete all as specified and directed. |
| 11 | M&L for cement concrete type D-2, 1:4:8 mix using 40 mm graded crushed stone aggregate) in foundation, filling & mass concrete complete all as specified and directed.Note - Alternate 10th post, corner posts and posts to be laid in low lying area at the discretion of Engr-in-Charge shall only be embedded in PCC. |
| 12 | M&L for PCC 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in copings including use of form work straight or curved etc complete all as specified and directed. |
| 13 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for including removing rubbish from worksite outside MD land at any distance complete all as specified and directed. |
| 14 | M&L for precast RCC 1:2:4 type B-1using 20mm graded stone aggregate as in cover slab of main holes, drain and similar article with set in cement mortar 1:4 complete all as specified and directed. |
| 15 | Demolition of cement concrete (unreinforced) in ground floors and paving of any description not exc 15 cm thickness (below or above GL) including removing materials obtained from demolition from worksite outside MD land any distance complete all as specified and directed. |
| 16 | M&L for plain cement concrete type B-1 (1:2:4), using 20 mm graded crushed stone aggregate, as in surface chanel and drain complete all as specified and directed. |
| 17 | M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 18 | M&L for PCC type B-2, 1:2:4 (using 40 mm graded stone aggregate) 75 mm thick as in Sub Base of floors/hardstanding, plinth protection, etc and finished the cement concrete surface complete all as specified and directed. |
| 19 | M&L for plain cement concrete type B-1 (1:2:4), using 20 mm graded crushed stone aggregate, 40 mm thick , as in path /paving / flooring finished even and smooth without using extra cement including Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed. |
| 20 | Dismantling posts or struts (wood, steel or RCC) any section embedded in Concrete, brick work, masonry, etc., including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 21 | M&L for reinforced cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) in precast poles, fencing posts, straining or terminal posts, struts etc for fencing, average sectional area exc 100 Sqcm. and n.exc 250 Sqcm with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and directed. |
| 22 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 23 | All as per item No 22 above but 6 mm to 8 mm dia complete all as specified and directed. |
| 24 | Dismantling of chain link wire mesh of any type including removing of rusted unserviceable wire mesh, flat iton, round bar MS, nuts & bolts from work site and keep serviceable wire mesh, flat iton, round bar MS, nuts & bolts for reused in safe custody complete all as specified and directed. |
| 25 | Supply only chain link fencing made out of 3.15 mm dia galvanised steel wire, (Hot dipped galvanised), any size, made up into mattresses or cages complete all as specified and directed. |
| 26 | Fixing only chain link fencing to post old and new including line wires, any mesh , size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.Note: MS flat iron and nuts and bolt shall be measured and paid under respective items and old material shall be obtained from dismantling item here-in-before. |
| 27 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete including removing dismantled material from work site complete all as specified and directed. |
| 28 | S&F for rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering. doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening grade Fe-410-W (Gde-E-250) quality -B including dismantling of old rusted structuralsteel and removing from site complete all as specified and directed. |
| 29 | S&F for framed work such as grills, gratings, fencing posts etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar work con forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 30 | M&L for preparation of new or previously untreated steel surface and applying two coats of synthetic enamel paint over a coat of red oxide of surface exc 10cm width or girth complete all as specified and directed. |
| 31 | Dismantling of mild steel Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings, including removing of rusted unserviceable wire from work site and keep serviceable wire for reused in safe custody complete all as specified and directed. |
| 32 | M&L for Mild steel Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including,securing or tying at crossings with and Provision of galvanised mild steel wire, staples or steel pins etc (each line wire to be measured) complete all as specified and directed. |
| 33 | M&L in replacement Concertina coil 610 mm dia having 50 Nos of turns in each coil weighing approx 8.5 kg/coil fabricated from PTC, anti rust coating of specification as indicated below extendable upto a length of 6 meters enabling adjacent coils to be jointed by special galvanized steel clips in order to form a long stretch of continuous barrier complete.Specification of PTC : Punched tape coils of approx weight 8.5 kg/coil and length 6m (approx) PTC round in shape, made of GP sheet 5mm and high tensile HC wire 2.6 mm, with blades of size 19 mm+ 2mm, at a distance of 24 cm and it is coated with anti rusted paint for maximum corrosion both sides resistance and durability and also providing camouflage effect complete all as specified and directed. |
| 34 | M&L for Mild steel round bars 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for chain link mattresses, as in tie bar strengthing and fising with nuts & bolts complete all as specified and directed. |
| 35 | M&L for Mild screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 but n.exc 15cm long and 11 to 15 mm dia. of shank complete all as specified and directed. |
| 36 | M&L for spot welding in repairs exceeding 2.5 cm but n.exc 5 cm in length, thickness of metal to be welded exceeding 6 mm and not exceeding 9mm complete all as specified and directed. |
| 37 | M&L for preparation of new steel surfaces of any description not otherwise described n.exc10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified and directed. |
| 38 | M&L for preparation of new concrete surfaces of fencing post and applying two coats of cement base paint complete all as specified and directed. |
| 39 | S&F for MS flat iron of any size confirming to Fe-290 Gde E-165 cut to length of reqd size, bent to shape, drilling holes, noching for wire etc to fencing posts for securing chain link fencing with nut & bolts or clamps complete all as specified and directed. |
| 40 | Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 900 mm square with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc complete as per drawing, specification complete all as specified and directed. |
| 41 | M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS-15658-2006 of 60 mm thickness M-40 grade complete all as specified and directed. |
| 42 | M&L for sand filling under floor or in foundations including watering and consolidation complete all as specified and directed. |
| 43 | M&L for chequered cement concrete tiles with grey cement and pigment of size 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15 mm hick screed in cement mortar 1:6 complete all as specified and directed. Material and labour laying well burnt old size bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender