Tender For Provision Of Toilet Blocks With Allied Facilities At Old 2 Coy Living Area & Mt Garage No 2 Of 2 Ttr, 1Stc And Provn Of Septic Tank And Soak Pit At Bldg No. T- 462 At Dsoi Under Area Age B/R- I Of Ge (P) No. 01 Jabalpur
Tender Value
44.62 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
10 days left
EMD
89300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Toilet Blocks With Allied Facilities At Old 2 Coy Living Area & Mt Garage No 2 Of 2 Ttr, 1Stc And Provn Of Septic Tank And Soak Pit At Bldg No. T- 462 At Dsoi Under Area Age B/R- I Of Ge (P) No. 01 Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. complete all as specified and directed. |
| 2 | Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 3 | M&L for Add to (or deduct from item No 1) for every 3cm or part thereof above or below 15cm averaging depth in soft/loose soil complete all as specified and directed. |
| 4 | Returning filling in incl spreading levelling watering and well rammmed in layers n exc 25cm complete all as specified and directed. |
| 5 | Removing excavated soil exc. 50m but not exceeding 250 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 6 | Excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 7 | M&L for Cement concrete type D-2 1:4:8 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed |
| 8 | M&L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortor 1:4.complete all as specified and directed |
| 9 | M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified and directed. |
| 10 | M&L for Cement concrete type C-2 1:3:6 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed |
| 11 | M&L for Granite(of any type)tiles 16 to 18 mm thick as in any position and similar works over 10mm thick cement screed in CM 1:4, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite stone incl cutting, polishing complete all as specified and directed |
| 12 | M&L for Machine cut cudappah stone slab 20-25mm thick horizontal/ vertical partion over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed |
| 13 | M&L for Coloured Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed in CM(1:6) complete all as specified and directed |
| 14 | M&L for Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick backing coat in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed |
| 15 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length including fastenar of 100 mm long 10 mm dia complete all as specified and directed |
| 16 | S&F Factory made single/double extruded WPC (Wood Polymer Composite) solid decorative prelam both side flush door 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 17 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 18 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 19 | S&F SS butt hinges100mm long medium weight, cold rolled. complete all as specified and directed. |
| 20 | S&F 200 mm long extruded SS handles, fabricated type. complete all as specified and directed. |
| 21 | S&F 150 mm long extruded alu alloy handles, fabricated type, anodised. complete all as specified and directed. |
| 22 | S&F 300mm SS sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy. complete all as specified and directed. |
| 23 | S&F 200mm long SS barrel tower bolts of extruded section and fixed. complete all as specified and directed. |
| 24 | S&F 150mm long Aluminium,anodized barrel tower bolts of extruded section and fixed. complete all as specified and directed. |
| 25 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples. complete all as specified and directed. |
| 26 | S&F 3.00 mm thick sheet glass ordinary quality and glazing complete in square nexc 0.50sqm each. complete all as specified and directed. |
| 27 | M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters/frame of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws as per architectural drawings and complete all as specified and directed. |
| 28 | M&L for providing RCC M-25 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 29 | M&L for providing RCC M-25 as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 30 | M&L for providing RCC M-25 as in Columns, pillars, piers, posts and struts complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 31 | M&L for providing RCC M-25 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 32 | M&L for providing RCC M-25 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 33 | Use and waste flat formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 34 | Use and waste flat fair finish formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed. |
| 35 | Use and waste flat fair finish formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 36 | Use and waste flat fair finish formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 37 | Use and waste flat fair finish formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 38 | S&F TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and directed. |
| 39 | S&F TMT steel bars 5mm dia and over, up to and including 10mm dia in stirrups spcers and binders. complete all as specified and directed. |
| 40 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 41 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channelor flat sections) including distance pieces, cleats etc. complete all as specified and directed. |
| 42 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 43 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 44 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed |
| 45 | M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes for 150 mm bore SWG pipes including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed. |
| 46 | Supplying, laying and jointing for 150-160mm nominal dia DWC pipes class SN-4 conforing to IS -16098:2013 Part-I stiffness with and incl necessary jointing materials complete all as specified and directed. |
| 47 | S&F Vitreous China wash down water closet pan (pedestal pattern), white, connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia with mild steel chromoum plated complete all as specified and directed. |
| 48 | S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests , white, connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia with mild steel chromoum plated complete all as specified and directed. |
| 49 | S&F 10 litre capacity PVC flushing tank,, syphonic action type, flushing cistern, low level, white, with inlet, ball valve,pvc flush pipe, float and handle incl brackets and waste pipe complete all as specified and directed. |
| 50 | S&F ovel type counter top Wash hand basin 550x400mm vitreous china (white) including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified and directed. |
| 51 | S&F Vitreous China urinals half stall white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, cp urinal spreader pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. complete all as specified and directed. |
| 52 | S&F 15mm bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 53 | S&F for 15mm angle cock/stop cock any type (concealed) chromium plated,cast copper alloy, and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified and directed. |
| 54 | S&F PVC connections 15 mm size with brass nuts both side of length 450 mm complete all as specified and directed . |
| 55 | S&F 15mm bore GI Tubes, 'medium grade',galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 56 | S&F 20mm bore GI Tubes, 'medium grade',galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 57 | S&F 25mm bore GI Tubes, 'medium grade',galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 58 | S&F 25mm PVC valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brassv ferrule and fixed complete all as specified and directed. |
| 59 | S&F Gun-metal,25mm globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 60 | S&F Gun-metal, 20mm globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 61 | S&F Health faucet (ABSBody) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 62 | S&F Chromium plated SS soap dish including fixing arrangement complete all as specified and directed.. |
| 63 | M&L for PVC Nahani trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all as specified and directed . |
| 64 | S&F bevelled edge mirror of selected quality 5mm glass, mounted on 5mm thick PVC fibre board and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 65 | S&F110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls. complete all as specified and directed. |
| 66 | S&F 110mm bore PVC (SWR) bends any radius.complete all as specified and directed. |
| 67 | S&F 110mm bore PVC (SWR) junction single, (single T) equal or unequal any radius. complete all as specified and directed. |
| 68 | S&F 110mm bore PVC (SWR) cowl any radius. complete all as specified and directed. |
| 69 | S&F PVC (SWR) pipe inner dia 75mm single socketed in any length with rubber ring joint laid on wall/ceiling or laying in floors complete all as specified and directed. |
| 70 | S&F for 75 mm dia PVC (SWR ) bends and radius complete all as specified and directed. |
| 71 | S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with or without access door complete all as specified and directed |
| 72 | M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer. complete all as specified and directed. |
| 73 | M&L for 15 mm thick cement plaster in CM 1:6 on surfaces of fair faces of brick work or concrete surfaces with finished surfaces even and smooth with out using extra cement complete all as specified and directed. |
| 74 | M&L for rendering 5 mm thick in C:M 1:3 on Ceiling and finishes and smooth complete all as specified and directed |
| 75 | M&L for cement concrete 75mm type C-2 1:3:6 as in plinth protection complete all as specified and directed. |
| 76 | M&L for Distempering with 1st quality acrylic distemper (ready mixed) washable, antifungal having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work/old surfaces of wall/ceilingas per manufacturer instructions applied over priming coat with fully automatic airless spary machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surfaces in both the coats of paint, complete all as specified and directed. |
| 77 | Material & Labour for applying Two or more coats of 100% on new/ old surfaces of wall/fascia etc Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces as per manufacturer instructions applied over priming coat with fully automatic airless spary machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surfaces in both the coats of paint,. (upto 5 storey) complete all as specified and directed. |
| 78 | M&L for water proof cement based putty @ 1 Kg (undiluted) per sqm mtr on layers over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surfaces free from dust etc by skilled labour as per following steps:- complete all as specified and directed(1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with mixing capacity of min 2.5 kg putty per minute.(2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI.(3) Allow 6-8 hrs time to dry the putty surfaces complete all as specified and directed |
| 79 | S&F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position including taking down existing water tank complete all as specified and directed. |
| 80 | S&F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position including taking down existing water tank complete all as specified and directed. |
| 81 | S&F brass chromium plated towel ring 20mm dia, round type, fixed with CP brass screws including wooden/plastic beads complete all as specified and directed. |
| 82 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone agg) as in seismic and other similar bands, coping, bed block or similar work including necessary form work complete all as specified and directed. |
| 83 | M&L for 10mm thick rendering on roof surface/concrete surface in CM 1:4 complete all as specified and directed. |
| 84 | M&L for Apply oil bound bitumen primer @ 0.30 Litre / Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg / Litre at 25 degree Celsius on the prepared dry roof surface.complete all as specified and directed. |
| 85 | M&L for Laying APP 3mm thick unrolled over the bitumen coated surface polymeric water proofing membrane Hyperplas standard wt not less than 3kg/sqm with 100mm over laps shall be sealed by flame as per manufactures instruction complete all as specified and directed. |
| 86 | M&L for Applying two coat of bituminous base aluminium paint including preparation and aluminium red oxide complete all as specified and directed. |
| 87 | Taking of liquid/solid content from sump/septic tank either manually or by pumping or by pumping clearing thoroughly including disposal of liquid/solid content out of the Cantt area incl sewage line etc, disposing in pit and covering with layers of earth and taking all pracautions against foul/hazardous gas etc., (septic tanks, line, MH etc) complete all as specified and directed. |
| 88 | Excavating in trenches in any type of soil n. exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soil complete all as specified and directed.. |
| 89 | Excavating in trenches in any type of soil exc. 1.5 m in deep and n.exc 3.0m deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out soil complete all as specified and directed. |
| 90 | M&L, for 15mm thick rendering on any faces of stone, concrete or brick work in CM 1:4 surface finished even and fair complete all as specified and directed. |
| 91 | M&L for 15 mm thick rendering in cement mortar (1:3) on brick / concrete/ stone surfaces mixed with water proofing compound as per manufacturer instruction, finished even and smooth using extra cement complete all as specified and as directed. |
| 92 | M&L for Precast cement concrete Type B-1 1:2:4 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:6 complete all as specified and directed. |
| 93 | M&L for Broken bricks of gauge not exceeding 63 mm for loose filling in sokage pit, sokage wells complete all as specified and directed. |
| 94 | M&L for cement concrete type B2 , 1:2:4 using 40 mm gradded stone aggregate in surface channels and drains complete all as specified and directed. |
| 95 | M&L for PCC (1:2:4) type B2, (using 20 mm graded stone aggregate), as in foundations / mass concrete/ levelling course complete all as specified and directed. |
| 96 | M&L for point wiring with 1.5 Sq mm, FRLSH, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through concealed conduit and including concealed PVC rigid non metalic conduit of size 19/20mm, on ceiling/wall, with and including continuous 1.5 Sqmm, FRLSH, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including sunk metal sheet enclosure rectangular terminal boxes of suitable size and incl frame plate, white modular cover plates suitable for mounting modular switches, sockets etc for light and fan points complete all as specified and directed. |
| 97 | ~ditto~ all as per item No. 96 here in before but with one 3 pin, 5 amps, socket outlet on the same board. complete all as specified and directed. |
| 98 | ~ditto~ all as per item No. 96 here in before but with one 3 pin, 5 amps socket outlet on independent board. complete all as specified and directed. |
| 99 | ~ditto~ all as per item No. 96 here in above but with 1100 Volts grade copper stranded conductor FRLSH cable of size 2.5 Sqmm main & with 2.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 15 Amp on Independent board complete all as specified and directed. |
| 100 | Supply and fix modular switch type 230/ 250 volts, 6 amps, 1 module, single pole, one way, complete all as specified and directed. |
| 101 | Supply and fix modular socket out let multi purpose 2 in 1, 2/3 pin, 6 amps,2 module flush type, ISI marked complete all as specified and directed. |
| 102 | Supply and fix switch modular 16 amps, flush type, ISI marked complete all as specified and directed. |
| 103 | Supply and fix modular socket 2/3 pin combined, 6/16 amps 2 module, flush type, ISI marked complete all as specified and directed. |
| 104 | Supply & Fixing single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified and directed. |
| 105 | Supply and fix ceiling rose surface bakelite, three terminal complete all as specified and directed. |
| 106 | M&L for Sub main wiring with two single core PVC Insulated cable two run of size 6.0 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 6.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire complete all as specified and directed.Note : - Two run of 6 Sqmm & one run of 6 Sqmm cable and one run of conduit shall be measured as one unit run. |
| 107 | M&L for Sub main wiring in repair with two single core PVC Insulated cable two run of size 4.0 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 4.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire Including taking down old unsv .complete all as specified and directed.Note : - Two run of 4 Sqmm & one run of 4 Sqmm cable and one run of conduit shall be measured as one unit run. |
| 108 | Supply and fix rigid non metallic, medium grade, PVC conduit, concealed type of size 20 mm with all accessories such as couplers, lock nuts, saddles, pipe hook, tees, bends, etc., including cutting chases for conduits and making good the disturbed surface with PCC as per site requirement complete all as specified and directed. |
| 109 | Supply and fix smart bright Batten Series, LED luminaire using LEDs 20/22 watt, natural white, 2200 Lumen, THD max 10 % ,CRI min 80 % with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start ,with 3 core flexible copper wire 1.5 sqmm and connecting accessories ,Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification complete all as specified and directed. |
| 110 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed . |
| 111 | Supply and fixing LED street light / security light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and directed. |
| 112 | Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers and complete all as specified and directed. |
| 113 | Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed. |
| 114 | S&F sheet metal enclosure MCB DB double door, single pole and neutral, 240 volts, 8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified and directed. |
| 115 | Supply & fix RCBOs For earth Leakage , overload & short Circuit Protection Double Pole 30 mA complete all as specified and directed |
| 116 | S&F MCB Single Pole and Neutral 240Volt, 40 Amps, 'C' series,10KA breaking capacity complete all as specified and directed |
| 117 | S&F MCB Single Pole 240Volt, upto 40Amps,10KA breaking capacity complete all as specified and directed. |
| 118 | Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured 2 core X 10 SQMMwith multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of the under mentioned type and sizes complete all as specified and directed. |
| 119 | Supplying and laying DCWP pipe OD 50 mm , ID 38 mm complete all as specified and directed. |
| 120 | Supply and laying pipe galvanized, “Medium class”, including fittings like tee , elbow , union joints etc of dia 25 mm and complete all as specified and directed. |
| 121 | Supply and laying pipe galvanized, “Medium class”, including fittings like tee , elbow , union joints etc of dia 20 mm and complete all as specified and directed. |
| 122 | S&F gun metal gate valve of 25 mm bore sizes screwed down high pressure with handle, Iron wheel (ISI marked) complete all as specified and directed. |
| 123 | S&F gun metal gate valve of 20mm bore sizes screwed down high pressure with handle, Iron wheel (ISI marked) complete all as specified and directed. |
| 124 | Earthing complete for various equipments with galvanised steel earth plate electrode 600 x 600 x 6mm thick directly burried in the ground (earth pit not less than 2.25 metre deep below ground level) with top edge of earth plate not less than 1.5 m below the ground level, connected to G.I wire 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, GI pipe 20mm bore light grade for protection of earthing strip, PCC chamber 1:4:8, type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber plastered with 12mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge ( 0.63) 8 mesh per linear inch, 50mm thick cover of RCC 1:2:4, type B-1, using 20mm graded stone aggregate, reinforced with 8mm TMT bar at 100mm center to center both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR Part-I and as specified including excavation and earth work and connecting the earthing to an earthing test point as specified and testing on complete all as specified and directed.Note:- Unit rate quoted is inclusive of earth lead and protection pipe upto 7.5 metre from earth plate. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender