Tender For Special Repair Of 06 X Static Water Tank (Swt No 38, 72, 100, 107, 119 & 128) At Various Sub Depots In Depot Area At Cad Pulgaon.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Sep 2026
8 days left
EMD
82000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wardha → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of 06 X Static Water Tank (Swt No 38, 72, 100, 107, 119 & 128) At Various Sub Depots In Depot Area At Cad Pulgaon.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15cm thick (below or above ground level) complete all as specified and directed |
| 3 | Demolition of reinforcement cement Concrete of any description and in any position (reinforcement cut as required to facilitte demolition) all as specified and as directed. |
| 4 | M&L for brick work with Old size Fly ash ’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 5 | M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete. |
| 6 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:4 complete all as specified & as directed. |
| 7 | M&L for PCC 1:2:4 type B1 using 20mm graded stone aggragate as in coping/bed blocks, bed plates etc including weathering slightly rounded or chamfered angles and throating making groves for fixing of man hole cover including necessary form work |
| 8 | Material and labour for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as under floor tiles finished the surface even and fair complete all as specified and as directed by Engineer-In-Charge. |
| 9 | M & L for 75mm thick cement concrete (1:3:6) type C1 using 20 mm thick graded stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & smooth and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed. |
| 10 | M&L for hard core of broken stone or boulders of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed. |
| 11 | M&L for reinforcement TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified. |
| 12 | M&L RCC nominal mix, type B0 using 12.50mm gradded stone aggregate in basement of water tank/walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses, etc mixed with water proofing compound complete all as specified and directed. |
| 13 | Material and labour for rendering 10mm thick internal surfaces in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement all as specified and as directed. |
| 14 | M & L 5mm thick rendering in cement mortor 1:3 on concrete surfaces mixed with water proofing compound as per manufacturers instruction and finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 15 | M&L for rendering 15mm thick in cement mortar 1:4 on brick/stone masonry surfaces or surfaces of brick/Stone work of walls, finishing the surface even & smooth without using extra cement complete all as specified. |
| 16 | Supply only Liquid water proofing admixture |
| 17 | M&L cement concrete 100mm thick 1:2:4 type B-2 using 40mm graded stone aggregate as in pathways/hardstanding/berms etc, laid in alternate ways, each panel not exceeding 3.00 Sqm finished the surface even and fair without using extra cement and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified & directed. |
| 18 | M and L preparation of newly plaster surface on external wall surfaces and applying Two coats of weather proof exterior Acrylic emulsion paint (Camouflage) (APEX or equivalent) of any tint over one coat of Exterior Acrylic primer (Asian or equivalent) on walls upto 10 m height including scaffolding with required safety measuers etc complete all as specified and as directed |
| 19 | Material & Labour for applying Two coats of Epoxy water proofing paint including priming coat of water proof based primer applied @ 0.90 litre/10 sqm over new surfaces as per manufacturer's instruction complete all as specified and directed. |
| 20 | M & L two coats of synthetic enamel paint on old steel surfaces of any description over 10cm width or girth including preparation all as specified and directed. |
| 21 | Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Hard/dense soil for repair of road side berms. |
| 22 | M&L Moorum/Red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering |
| 23 | Removing excvated soil n exc 50mtr and depositing where directed at a level n exc 1.5 above starting point. |
| 24 | Supplying & fixing in repairs retro reflective sign board (with details of SWT) made of high intensity retro reflective sheeting pasted on one side of 5mm thick ACP sheet with letters/grphics to be overlayed high intensity retro reflective sheeting of make 3M/Avery densioin as approved by I.R.C./MORTH duty plotted cut of approved colour fixed with SS frame work including complete all as specified and directed by Engineer-in-Charge. (Shape and size of board As per user requirement) |
| 25 | Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement lime or cement mortar (one side only measured in cases where both sides are plastered) |
| 26 | S&F for Expanded metal, cut to length, bent to shape required not exc 4 Kg/sqm and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to concrete of plastered surface all as per specified and directed. |
| 27 | Material and labour for rendering 20mm thick internal surfaces in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender