Tender For Provision Of Parking Shed For 08 X 2.5 Ton At Mt Area Of 16 Dogra At Mil Stn Alwar
Tender Value
38.35 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
10 days left
EMD
78000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alwar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Parking Shed For 08 X 2.5 Ton At Mt Area Of 16 Dogra At Mil Stn Alwar
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15cm thick (below or above ground level) complete all as specified and directed |
| 2 | Excavation in trenches not exceeding 1.50m wide and not exc 1.50m in depth for foundation n'exc 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed. |
| 3 | Description all as per item ser No 2 here-in-before but depth exc 1.5 m but n exc 3 m complete all as specified and directed . |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 5 | Removing surplus excavated soil to a distance n.exc 50 metre and n exc 100 metre and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 6 | M & L for PCC (1:4:8) type D-2, using 40 mm graded stone aggregate in fdn mass concrete complete all as specified and directed . |
| 7 | M&L RCC work M-25 Design Mix (using 20mm gradedcrushed stone aggregate )as in foundation including , raft, plinth beam bases for column etc basement slabs under ramed piles and mass concrete complete all as specified and directed . |
| 8 | M&L RCC work M-25 Design mix (using 20mm graded crushed stone aggregate) as in columns , pillars , piers posts and struts complete all as specified and directed |
| 9 | M&L RCC work M-25 design Mix (using 20mm graded crushed stone aggregate) as in beams, cantilevers bressumers, lintel over 1.5 mtr span complete all as specified and directed. |
| 10 | M&L TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 11 | Description all as per item Ser No 10 here-in-before but 5mm to 10mm dia as in stirrups, spacers binders etc complete all as specified and directed . |
| 12 | M&L form work to side of concrete foundation , footing , bases of columns, raft and raft beams, sides and soffits (If any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and directed . |
| 13 | M&L form work to side of pillar posts struts piers columns etc complete all as specified and directed |
| 14 | M&L form work to sides and soffits of floor or roof beam , beam nauching, griders, bressum-mers lintels cantilevers, shelves including supprots, overhangs etc also splays between floors and beams etc complete all as specified and directed |
| 15 | Supply only integral water proofing compound complete all as specified and directed |
| 16 | M&L brick work with fly ash 'brick straight or curved on plan exc 6m mean radius built cement mortar 1:6 complete all as specified and directed |
| 17 | M&L 15 mm thick rendering in cement mortar 1:4 mixed with water proofing compound finished with even and smooth mixed with Water Proofing admixture complete all as specified and directed. (Note : WPC shall be measured and paid separately under relevant item of this Schedule). |
| 18 | M&L for rendering 10mm thick internal surfaces in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and as directed. |
| 19 | M&L for preparation of newly plasterd surface of wall and applying two coats of cement base paint over and including a coat of primer complete all as specified and dircted |
| 20 | M&L for preparation of newly plastered surface of wall and applying three coats of white wash complete all as specified and directed |
| 21 | S&F for preparation of new steel surface of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat over red oxide primer complete all as specified and directed. |
| 22 | M&L for hard core of broken stone or boulders of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed. |
| 23 | M&L 75 mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as in foundation filling and mass concrete as floor sub base complete all as specified and directed |
| 24 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade and fixed with grey cement and no pigment including 25mm thick sand cussion and filled the joints with dry sand after laying the paver block etc complete all as specified and directed. |
| 25 | M & L for Providing cement concrete type B1, 1:2:4 (20 mm graed aggregate) as in copings complete all as specified and directed |
| 26 | M&L Pre-cast (Factory casted) cement concrete Kerb stone casted in PCC (1:2:4) Type B-1 using 20mm graded stone aggregates with plan or interlocking joints (as directed) with solid blocks, exc. 10 cm in width and setting and jointed in cement mortar 1:6, complete all as specified & directed. |
| 27 | M & L for preparation of kerb stone, new un-treated concrete or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint in black and white colour over a coat of primer complete all as specified and directed. |
| 28 | M&L 100 mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as in foundation filling and mass concrete as floor sub base complete all as specified and directed |
| 29 | M&L for PCC1:2:4 type B2 using 40mm graded aggregate 100mm thick as in floor complete all as specified and directed. |
| 30 | M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound, Grade ‘A’ complete all as specified and directed. |
| 31 | M&L 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection path laid in panel surface finished even and fair using extra cement complete all as specified and as directed. |
| 32 | M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, and eves board fixed with self tapping screws complete all as specified and directed |
| 33 | M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tesile strength of 550 Mpa as in roof covering to wall, fixed with self tapping screws complete all as specified and directed . |
| 34 | M & L for roof truses (framed), trussed, purlins, cranes gantries, rail and fastening and heavy bracket framing (Beam , tee, angle , channel or flat section) Fe 410-W (Gde-E250) quality A including distance pieces, cleats, bracket, etc complete all as specified and directed . |
| 35 | M & L for plate (plain or chequred channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachement complete all as specified and directed |
| 36 | M & L rolled sections as in main and cross beam, hip and jack rafters purlins where connected rafters and running rails and guides for sliding doors: fixed with angle cleats other connecting plates complete all as specified and directed |
| 37 | M&L for Providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame set in cement mortar Set in cement mortar 1:4 (type B-0 1:2:4) 12.5mm agregate complete all as specified and directed |
| 38 | M&L for mild steel screwe bolts (machine made) Dia of neck 11 to 15mm with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm long but n.exc 30cm long etc complete all as specified and directed. |
| 39 | M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor fire resistant low smoke (FRLS) PVC insulated and unsheathed cable 1100 Volts grade confirming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20 mm external dia) but shall be increased as per actual site requirement in accordance with clause No. 19.125 of SSR Part-I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling including 1.5 mm FRLS PVC insulated unsheathed copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakellite white/coloured top sheet cover 3.0 mm thick for one light point controlled by one way switch all as specified & directed. |
| 40 | Description all as per serial item No. 39 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board. |
| 41 | Description all as per serial item No. 39 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour. |
| 42 | Supply and fixing switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts complete all as specified & directed. |
| 43 | Supply and fixing switch piano, flush type, single pole, one way, 15 Amp, 230 Volts complete all as specified & directed. |
| 44 | Supply and fixing socket outlet, 3 pin (with 2 pin outlet also), 5/6 Amp, flush type, 240 Volts complete all as specified & directed. |
| 45 | Supply and fixing socket outlet, 2 in 1, 3 pin, 5 and 15 Amp, flush type, 240 Volts complete all as specified & directed. |
| 46 | Supply and fixing ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified & directed. |
| 47 | Supply and fixing decorative ultra slim liner LED lighting fixture with extended poly carbonate environmental friendly, energy efficient suitable for 16W to 20W with LED tube of model E-LITE LED pride and connecting up, complete all as specified and directed. Make : Havells cat part No. LHEXBHP71N1W018 or equivalent of philips/Crompton Greaves/ bajaj/Wipro/GE |
| 48 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion esistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified & directed. |
| 49 | Supply and fixing sheet metal enclosures double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar,8 way, 240 Volts complete all as specified & directed. |
| 50 | Supply and fixing sheet metal enclosures double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar,4 way, 240 Volts complete all as specified & directed. |
| 51 | S & F MCB 63 Amp, three pole & neutral,240 Volt complete all as Specified & directed. |
| 52 | S & F MCB 32/40 Amp, single pole & neutral,240 Volt complete all as Specified & directed. |
| 53 | S & F MCB 6-40 Amp, single pole 240 Volt complete all as pecified & directed. |
| 54 | S&F sub main wiring in and including passing through PVC conduit pipe 1100 Volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990 including taking down existing U/S sub main wiring (Note: Two runs of cable with one run of earth wire and one run of PVC Coundit should measured as one length) complete all as specified & directed. |
| 55 | Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 16 sqmm 2.0 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & directed.Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately complete all as specified & directed. |
| 56 | M/L for brick work with FLY ASH BRICKS(As Per IS-13757(1993) burnt clay fly ash building bricks), (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and etc complete all as specified & directed. |
| 57 | M&L for dry sand and punning for cushioning to under ground cable etc complete all as specified and directed.Note :- For the purpose of payment only punned thickness shall be measured. |
| 58 | Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & directed. NOTE : (i) Earth resistance value should be less than 5 Ohms (ii) Item includes the cost of 7.5 m GI pipe for protection of earth strip. |
| 59 | M&L for 40 mm bore GI pipe (Light grade) for protection of LT cable fixed to walls/ poles/road crossing including clamps etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender