Tender For Provn Of Security Gate Near Ashoka Stambha, Provn Of Reception Room At Gate No 2 Hq Ub Area And Certain Other Works Under Ge (West) Bareilly.
Tender Value
44.29 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
10 days left
EMD
89000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Security Gate Near Ashoka Stambha, Provn Of Reception Room At Gate No 2 Hq Ub Area And Certain Other Works Under Ge (West) Bareilly.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Aug-2026 | Amendment in BOQ | BOQ | 02-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n exc 1.5m deep in soft/loose soil complete all as specified and directed |
| 2 | Excavation over area n exc1.5m deep in soft/loose soil for foundation etc and getting out complete all as specified and directed |
| 3 | Excavation over area exc 1.5m deep and and n exc 3.00 m deep in soft/loose soil for foundation etc and getting out complete all as specified and directed |
| 4 | Excavation in trenches in soft/loose soil not exceeding 1.5m depth and n.exc 1.5m width for foundation etc and getting out all as spfd |
| 5 | M&L for PCC (1:4:8) (40mm graded aggregate) type D2 For in foundations, filling and mass concrete complete all as specified and directed. |
| 6 | M&L for RCC 1:2:4 nominal Mixed Type B1 (20 mm graded aggregate) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 7 | M&L for use & waste of flat and rough surface formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 8 | M&L For RCC 1:2:4 Nominal Mixed type B1 (20 mm graded aggregate) for Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 9 | M&L for use & waste of of flat and rough Formwork to sides of pillars,posts, struts, piers, columnsand stanchions complete all as specified and directed. |
| 10 | M&L RCC 1:2:4 Nominal Mixed type B1 (20 mm graded aggregate) for Beams, cantilevers, bressummers, lintels any span complete all as specified and directed. |
| 11 | M&L For RCC 1:2:4 Nominal Mixed type B1 (20 mm graded aggregate) for Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc and the like complete all as specified and directed. |
| 12 | M&L for use & waste of of flat and rough surface formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 13 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia orsecuring with clips complete all as specified and directed. |
| 14 | M&L Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 15 | M&L for brickwork with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in (1:6) including all quoins, arches, pillars etc at any floor/height complete all as specified and directed. |
| 16 | M&L cement concrete 75mm thick type B-0, 1:2:4 (12.50mm graded aggregate) as in floor complete all as specified and directed. |
| 17 | M&L rendering 12mm thick in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces complete all as specified. |
| 18 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 of cement used and finishing even and smooth without using extra cement complete all as specified. |
| 19 | M&L preparation and necessary cleaning of surface free from dust ,loose paint etc by skilled labour and applying two coat weather proof external Emulsion and including two coat of wall care putty paint on wall complete all as specified and directed. |
| 20 | S&F mild steel framed work as in window guard bars, grills, grating, chowkhat. bar or forged into spikes, framed balusters, walkway railing etc and similar work including welding complete FE-290 grade E-165 complete all as specified and directed. |
| 21 | M&L Preparation to new steel surfaces exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 22 | M&L for Machine pressed precast conctete interlocking paver block with gray cement and pigment or selected coloured or pattern any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade over and including M & L for 25mm thick sand cushioning including spreading and levelling complete all specified and directed. |
| 23 | M&L for 20mm-25mm thick Dholpur stone (selected type and shade by GE) in floors, steps, jambs, pillars, window cills, cooking plateforms and like in CM 1:4 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including grinding and polishing, moulding of edges complete over and including M&L for 20 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and directed. |
| 24 | M&L for framed work as in doors or ornamental and intricate design gates of angle or other section with gusset plates, rails, braces, including pintal etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe-410- W (Gde- E-250) quality- B complete all as specified and directed. |
| 25 | Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point out complete all as specified and directed |
| 26 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in Soft/loose soil out complete all as specified and directed |
| 27 | M&L for 15mm thick cement plaster in CM (1:6) on other than fair faces of brick wall and projection surface any description without using extra cement complete all as specified and as directed. |
| 28 | M&L for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives and putty that offer anti algae high performance exterior wall finish a applying exterior weather proof paint, should be able to spray in hard to reach areas and penetration of exterior weather proof paint on the surface to achieve excellent application using limited manpower complete all as specified and directed. |
| 29 | M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in coping etc complete all as specified and shown on drawings complete all as specified and as directed. |
| 30 | M&L for Providing precast cement concrete (Type B0 1:2:4) louvres and jallies, 20-22mm thick set in cement mortar 1:4, including all mouldings etc including frame complete all as specified and directed |
| 31 | M&L for Providing precast cement concrete PCC 1:2:4 type B0 , base, top and pillar,post etc set in cement mortar 1:4 as per site requirement complete all as specified and directed |
| 32 | M&L for use & waste of flat and rough surface of formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. |
| 33 | Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 34 | M&L for Plain Cement concrete 1:4:8 type D2 (Nominal Mix) using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed. |
| 35 | M&L Antitermite treatment for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed. |
| 36 | M&L Antitermite treatment for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed. |
| 37 | M&L for Formwork to Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces complete all as specified and as directed by the Engineer-in-Charge |
| 38 | M&L for Formwork fair finished surfaces of concrete soffits such as Flat roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) complete all as specified. |
| 39 | M&L for RCC M-25 (Design mix) using 20mm graded stone aggregate as in foundation, plinth beams, footings, under reamed piles complete all as specified and as directed. |
| 40 | M&L for RCC M-25 (Design mix) using 20mm graded stone aggregate Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 41 | M&L for RCC M-25 (Design mix) using 20mm graded stone aggregate slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves (and the like) complete all as specified and directed. |
| 42 | M&L for RCC M-25 (Design mix) using 20mm graded stone aggregate Beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified. |
| 43 | M&L for RCC M-25 (Design mix) using 20mm graded stone aggregate chajjas complete all as specified and directed. |
| 44 | M&L brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed. |
| 45 | M&L Damp proof course in cement concrete 1:2:4 type B-0(12.5 mm graded stone aggregate),and including M&L for 40 mm thick including necessary form work with WPC as per manufacturer instruction by weight of cement complete all as specified and directed. |
| 46 | M&L 12mm thick cement plaster on brick surfaces or concrete surfaces (on internal surface) in cm (1:6) newly surface even and smooth without using extra cement and necessary scaffolding all as spd and directed |
| 47 | M&L rendering 5 mm thick in CM(1:3) on fair faces of brick work or concrete surfaces as in soffits of slab (ceiling) etc of any description, and finishing the surfaces even and smooth with using extra cement complete all as specified and directed. |
| 48 | Supply only liquid Water proofing compound out complete all as specified and directed |
| 49 | M&L rendering 15 mm thick in CM(1:4) on fair faces of brick work or concrete surfaces as in floors and roof of any description, and finishing the surfaces even aincluding WPC complete all as specified and directed. |
| 50 | M&L APP based membrane course roof treatment in layers with following provisions:- (i) Applying one coat of bitumen's primer polymerized primer oil based coat, evenly @ 0.25ltr/Sqm as priming coat to the prepared surfaces, till the surfaces is properly impregnated and the solvent oil in the base primer shall be allowed to evaporated completely.(ii) Applying APP based pre-fabricated with non woven polyester reinforced membrane stabilized with fibre glass strands and top with grey mineral slates 3mm thick and weight not less than 3.50 Kg/Sqm by torch application method.(iii) Applying a coat of solar reflective bituminous aluminium paint @ 0.11kg/Sqm over mineral surface. |
| 51 | M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 52 | S&F Polythene film black 50 micron laid in floors over sand layer complete all as specified and directed. |
| 53 | M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 54 | M&L 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring complete all as specified and directed. |
| 55 | M & L for PCC 1:2:4 type B0 (using 12.50mm graded stone aggregate) 25 mm thick as in sub base to receive tiles complete all as specified and directed. |
| 56 | M&L for Vitrified double charged marble finish coloured ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm and not exc 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement and including M&L for 15mm thick screed bed 1:6 cement motar complete all as specified and directed. |
| 57 | All as per item no 58 as above but as in vertical surfaces including dismantling of tiles and including M&L for rendering 10 mm thick in cement mortar 1:4, as in backing layer complete all as specified. |
| 58 | M&L for non skid ceramic coloured tiles marble finish 7mm to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and pointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including M&L for 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 59 | M&L for glazed ceramic coloured tiles in vertical surface 600mm x 300mm x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including M&L for 10 mm thick rendring in CM 1:4 complete all as specified and directed. |
| 60 | M&L M&L Granite 18mm-20mm (of any type) work(table rubbed and polished)in steps, jambs, pillars, window cills, cooking platforms and like in cementmortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite and rounding edges etc over and including M&L for 20mm thick screed bed complete all as specified and directed. |
| 61 | M&L Providing PCC 1:3:6 types C1 (using 20mm graded stone aggregate) 75mm thick as in plinth protection, finishing cement concrete surface even and smooth without using extra cement. |
| 62 | Material and labour for two coats of distamper oil emulsion on newly plastered surface of ceiling including necessary preparation complete all as specified and directed |
| 63 | M & L applying two coat of distemper oil emulsion white or tinted on old or new decorated or undecorated wall surface including preparation of surfaces by washing rubbing down and stoping of distempered and two coat of wall care putty min thickness 1.5mm of each painted surfaces complete all as specified. |
| 64 | M&L for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish over two coat of wall care putty and primer to achieve excellent application using limited manpower complete all as specified and directed. |
| 65 | M&L for PCC 1:2:4 type B2 (using 40mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 66 | S&F 125mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, etc, complete including wooden texture finished paint on the frame surface complete all as specified and directed |
| 67 | S&F 105mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, etc, including wooden texture finished paint on the frame surface complete all as specified and directed. |
| 68 | S & F 35 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including teakwood lipping 6mm thick fixed with nails complete all as specified and directed. |
| 69 | M & L for 35mm thick plain framed glazed and skeleton shutter open rebated & prepared to receive glass, gauge etc, without sash bar edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, of 2nd class hard wood , members of shutters as specified in SSR Part - I Section 8 clause 8.24 (a) fitted to chowkats complete all as specified and directed. |
| 70 | M&L for Preparing new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 71 | S & F Solid Prelam PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with MS tube, suppling & fixing in opening as per specification & drawing complete all as specifed and directed. |
| 72 | S&F 30 mm thick factory made one side Prelam PVC sheet other side decorative (door shutter) used instead of Plain colour PVC sheet. Stile and rails feathered at edges and on other side 10mm 90 degree bent edge consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as per specification & drawing. |
| 73 | Supply and fix sheet glass selected quality 5.50mm thick, any size, tinted of approved colour fixed with rubber beading complete all as specifed and directed. |
| 74 | S&F for providing three track sliding type (2 glazed track +1 gauge shutter) aluminium windows, section profiles of aluminium as per sketch No SK/2019/01 dated 21/01/19, aluminium alloy extruded sections conforming to HE 9-WP of BIS 733 and HP 9 -WP of BIS 1285 as amended, with minimum thickness of frames (outer bottom, Top & side ) 1.5mm and sliding sash (stiles & rails) of minimum thickness 1.2 mm. The windows shall be procured from a BIS license factory manufactoring windows to BIS-1948, The EPDM gaskets, rollers, recessed handles cum locks aluminium snap beading for receving glass/wiremesh with stainlss steel screws shall be provided with windows. The aluminium extruded section shall be of make Jindal/Hindalco/Alom extrusions etc all as listed. Note:- Glazing and Stainless steel wire mesh and wind0w frame /chowkhat etc all rates are inclusive. |
| 75 | S&F 100 mm thick Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed |
| 76 | S&F Aluminium bow handles, cast type, anodised 150 mm long complete all as specified and directed |
| 77 | S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 78 | S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 79 | S&F for 15mm bore GI water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors of any description complete all as specified or as directed. |
| 80 | S&F for 20mm bore GI water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors of any description complete all as specified or as directed. |
| 81 | S&F 100mmx100mm stainless steel grating fixed omplete all as specified and directed. |
| 82 | S&F fancy type stainless steel brass chromium plated towel rail size 600mm long including a pair of brass bracket complete all as specified and directed.Model No :- ACN -1181N of Jaguar ,Cera Model No F5006101, Hindware : F580008CP & Asian Paints Cat Part No AC-108. |
| 83 | S&F Vitreous China table/counter top wash basin of suitable size including SS bottle trap, and cabinet of PVC shutter fixing on counter with SS waste coupling complete all as specified and as directed. |
| 84 | S&F fancy type brass chromium plated toilet paper holder, complete all as specified and as directed. Model No :- ACN-1153N Jaquar, Hindware model No F 880003, Parryware model No T6514A1 & Asian Paints Cat Part No AC506B. |
| 85 | S&F Vitreous china wash down water closet EWC) white s pedestal pattern complete, including connection to drain pipe and to flushing pipe antisyphonage pipe plastic water closet seat back closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device, incl. jet connections etc complete all as spd & directed |
| 86 | S & F 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including 32mm PVC pipe for low level cistern L type, brackets fixed on wall complete all as specified and directed. |
| 87 | S&F vitreous china full stall urinal white, with grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia complete all as specified and directed. Make Jaquar- URS-WHT-13261H, Kohler-4991-ET-O/Grohe-39438000/Equvalant make approved by GE. |
| 88 | S&F health faucet 1 mtr SS Braided connection tube with wall hook complete for ETWC incl necessary fitting complete all as specified and directed. Make : Jaquar Cat Part No ALD-CHR-577, Cera Cat No :- F803008AB, Asian Paints Cat Part No C-232N & Kerovit Cat No KA580008 |
| 89 | S&F fancy type brass chromium plated soap dish of 160mmx160mmx90 mm complete all as specified and directed. |
| 90 | S & F fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed. Model: model No F-5005301 of CERA, Asian Paints Cat Part No AC107 & Kerovit Cat Part No :- KA920005 |
| 91 | S&F designed looking mirror area exc 0.54 sqm to 0.75 sqm of selected quality 6mm thick glass, mounted on fixed to wall with CP plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 92 | S&F fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed. |
| 93 | S&F fancy type 15 mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing mixer from old WHB complete all as specified and directed. Model :ARI 39001B Aria of Jaquar ,Hindware Model No F280010 SCP, Cera Model No F2002461, Asian Paints Cat Part No MMCH101 & Kerovit Cat Part No :- KB1211026. |
| 94 | S/F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to laid to floor or fixed to wall complete all as specified and as directed. |
| 95 | S&F stainles steel Curtain Rod 25 mm dia of approved quality with two number decorative design as approved brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod all as directed and specified. |
| 96 | S&F PVC connection low density polythene pipe 15 mm dia , 450 mm long , heavy duty with PTMT nuts complete all as specified and as directed. |
| 97 | S&F 15 mm bore Bib cock with wall flange and aerator,brass chromium plated with fancy type and screwed down to 15mm bore GI tubing or for brass ferule complete all as specified and as directed. |
| 98 | S&F Stop valves, cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch , screwed both ends for iron pipe or for unions and of size 15 mm bore complete all as specified and as directed. |
| 99 | S&F Towel rail chromium plated fancy type 60cm long including bracket fixed between flanges complete complete all as specified and as directed. |
| 100 | S&F PVC (SWR) pipe of 75 mm bore in double socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 101 | S&F PVC (SWR) pipe of 75 mm bore in double socketed in any length with rubber ring joints laid in floor complete all as specified and as directed. |
| 102 | S&F PVC (SWR) pipe of 110 mm bore in double socketed in any length with rubber ring joints laid in floor complete all as specified and as directed. |
| 103 | S&F PVC (SWR) 75mm dia floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 104 | M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in bed of drain pipe 150 mm bore including packing under and completely surrounding the pipes after they are laid and tested complete all as specified and shown on drawings. |
| 105 | M & L 150 mm dia SWG pipe Grade A confirming to IS-651-1972 laid in trenches and joint in cement mortar 1:1 including demolition of existion line complete all as specified and directed. |
| 106 | M&L for Machine pressed precast conctete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade over and including 25mm thick sand cushioning including watering and consolidation complete all as specified and as directed. |
| 107 | M&L for RCC M-20 (Nominal mix) using 20mm graded stone aggregate as in foundation, plinth beams, footings, under reamed piles complete all as specified and as directed. |
| 108 | M&L for RCC M-20 (Nominal mix) using 20mm graded stone aggregate Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 109 | M&L for RCC M-20 (Nominal mix) using 20mm graded stone aggregate slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like) complete all as specified and directed. |
| 110 | M&L for RCC M-20 (Nominal mix) using 20mm graded stone aggregate Beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified. |
| 111 | M&L for RCC M-20 (Nominaal mix) using 20mm graded stone aggregate chajjas complete all as specified and directed. |
| 112 | S&F sheet glass of 4mm,ordinary quality and glazing with oil putty or wooden beading in squares n.exc 0.5 Sqm in each pane,complete all as specified. |
| 113 | S&F galvanised mild steel wire cloth 0..56mm nominal dia of wire and average width of aperture 1.18 mm all as spd and directed |
| 114 | S&F for steel ventilators with top fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed (Note :- Glass shall be measured and paid for separately). |
| 115 | S&F Rotational moulded polyethylene triple layered water storage tanks of 1000 Litre capacity white in colour (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified or as directed. |
| 116 | S&F vitreous china squatting pan of orrissa pattern long pan size 580mm x 440 mm white with \\"P\\"or \\"S\\" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding (1:2:5), minimum 150mm all round and finish just below level of rim of pan complete all as specified and directed. |
| 117 | M & L 75 mm thick PCC 1:3:6 type C-2 (using 40mm stone aggragate)as in sub base, Floors, Paving, finished even and fair complete all as specified and directed. |
| 118 | M&L providing cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in benching, coping, bed blocks including necessary form work, weathering slightly rounded or chamfered angles and throating, complete all as specified and directed by Engineer-in-charge. |
| 119 | Surface excavation in soft/loose soil not exc 30 cm deep and average 15cm deep and getting out . |
| 120 | M&L for point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS-H , concealed PVC conduit medium grade not less than 20 mm dia ,conduit fittings and all accessories with suitable size of anodised 1.2 mm thick GI metal flush box, for mounting of Modular switches, sockets, fan regulator etc,including modular flush box, modular frame and modular white cover plate as top cover, including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS-H up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of the following. Note: (a) make of modular flush box are same as modular switches and sockets. |
| 121 | all as item no 123 as above but One light/bell/Fan point controlled by one,one way switch. |
| 122 | all as item no 123 as above but One three pin 5 Amp socket on same board with other switches. |
| 123 | all as item no 123 as above but One three pin 5 Amp socket on independent board |
| 124 | All as per item 123 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded incl 2.5 sq mm FRLS PVC copper conductor single core used as earth continuity conductoe complete all as specified.complete all as specified. |
| 125 | S&F Modular switch 1 way 6A,1 Module SP 230 V AC complete all as specified & directed. |
| 126 | S&F sheet metal enclosures 240 volt with 100 amps rated copper bus bar for double door 4 way DB's with protection IP-43-IK-09 with acrylic Door suitable for one MCB SPN as incoming and 10 MCB SP as out going for mounting flush on wall and making good disturbed surfaces complete and DB's shall hold type test certificate as per IEC 61439-3 all as specified and directed . (MCBs shall be measured and paid separately and should be same make of as DBs). |
| 127 | S&F MCB double pole 240 Volt 10 KA 40 Amp 'C' series conforming to ISI marked complete all as specified & directed . |
| 128 | S&F MCB single pole and 240 volt 10 KA 6-32 Amp 'C' series conforming to ISI marked all as specified and directed . |
| 129 | Supply and fixing of Recess mounted round down lighter Al pressure die –cast heat sink with high brightness LEDs with diffuser to give glare free light of 15 Watt complete all as directed by Engi-in-Charge |
| 130 | M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plate using 4 mm dia GI earth lead wire as earth lead moulded and rivetted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead protected in and including 15 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-I 2010 and testing on completion all as specified and directed. |
| 131 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as directed. |
| 132 | M&L for sand cushioning over and below the U/G cable laid (total depth of sand shall be 23cm punned till 18 cm) complete all as specified and directed by Engineer-in-Charge. Note : Punned thickness will be considered for measurement |
| 133 | M&L for providing old size sub class 'B' bricks laid perpendicular to the cable abutting each other all as specified and directed by the Engineer-in-charge. |
| 134 | M&L for GI tubing 'light grade' with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete for 40/50 mm dia. |
| 135 | S&F Modular switch 1 way 16A,1 Module SP 230 V AC complete all as specified & directed. |
| 136 | S&F Modular Socket, 6A 3 pin, 2 Module 230 V AC complete all as specified & directed. |
| 137 | S&F Modular socket outlet 2 in 1 three pin 6/16 Amp flush type complete all as specified. |
| 138 | S&F modular fan step type electronic fan regulator two module suitable for BLDC Ceiling Fan as required. |
| 139 | S&F ceiling rose, 3 terminal PVC/polycarbonate, isolated body 230 V AC. |
| 140 | S&F lamp holder PVC/polycarbonate B22 type, 230 V AC |
| 141 | S&F of LED Batten(4 ft) with aluminum extruded channel(housing) and polycarbonate diffuser for glare free light with input power 20 Watt , system efficiancy not less than 120 lm/watt with built in surge protection not less than 2.0 KV with acessories like both side end cap, driver, holder,screw including LED light with flexible sheathed copper conductor cable of suitable size to connect with ceiling rose complete all as directed. |
| 142 | S&F of LED light fitting mirror type with aluminum housing and polycarbonate diffuuser 2 feet ,10 watt 220V AC decorative type with acessories like both side end cap, driver, holder,screw including LED light with flexible sheathed copper conductor cable of suitable size to connect with ceiling rose complete all as directed. . |
| 143 | S&F of LED Lamp 12 Watt ,230 volt AC intigrated circuit complete all as directed. . |
| 144 | Supply and Fixing of LED Street Light Luminaire comprising of high pressure die cast aluminum housing heat resistant toughened glass with secondary lenses protection road way luminaries with high power LED 35 watt with efficiency 120 lumen/watt including GI brackete made out of 25/32 mm GI pipe medium grade and MS clamps for fixing of light fitting complete and connected with twin core PVC insulated copper flexible cable with existing point all as specified and directed. |
| 145 | S&F ceiling fans complete with Aluminium blades ,down rods as per site requirmennt, and accessories ,230 V ,1200 mm sweep.Min air delivery 225 CMM with service value not less than 6.00 ,BEE Five Star Rated with Brushless Direct Current(BLDC) Motor. Note :- Note:(1) Rate shall deemed to be included for hanging arrangements for new fan and writing MES nos on ceiling fan . |
| 146 | S&F exhaust fans complete with Blades,frames & louvers etc with steel body AC single phase 230 V of size 300 mm sweep with speed not less than 900 RPM with double ball bearing ,100% copper winding motor all as specified by EIC . |
| 147 | S&F LED mirror light fitting of 1 x 10 watt LED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection all as specified and directed. |
| 148 | S&F LED mirror light fitting of 1 x 20 watt LED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection all as specified and directed. |
| 149 | Supply & Fixing security light fitting, LED type, 25 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed. |
| 150 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed. Please Enable Macros to View BoQ information |
| 151 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 02, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender