Tender For Repair (B/R) To Various Bldgs Of Power Supply, Water Supply And Other E/M Installations North And South Zone At installation Dronacharya Under Ge Fort Kochi
Tender Value
7.75 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
0 days left
EMD
15500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair (B/R) To Various Bldgs Of Power Supply, Water Supply And Other E/M Installations North And South Zone At installation Dronacharya Under Ge Fort Kochi
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish of the premises all as specified and as directed. |
| 2 | Material and labour for light shade vitrified ceramic tiles 7-8 mm thick polished area of each tiles exc 0.36 sqm but not exc 0.42 sqm, of approved shade and pattern (Pattern consists combination of two or more tiles) as in floor etc. jointed in neat cement slurry and pointed in coloured cement to match colour tiles over and including 15mm thick screed bed in cement mortar 1:6 and pointed in coloured cement to match coloured tiles complete all as specified and as directed.Notes: - (a)The Colour, shade and pattern shall be approved by the GE during execution work. (b) No extra cost shall be allowed for removing and re-fixing and necessary cutting of door etc. if any required during execution of work. |
| 3 | Material and labour for Non-skid coloured ceramic tiles of approved shade and pattern (Pattern consists combination of two or more tiles) exceeding 0.06 sqm but not exceeding 0.11 sqm 7 to 8-10mm thick, over and including 15mm thick screed bed in cement mortar 1:6 as in floors etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles complete all as specified and as directed.Notes:- (a)The Colour, shade and pattern shall be approved by the GE during execution work.(b) No extra cost shall be allowed for Removing and re-fixing and necessary cutting of door etc. if any required during execution of work |
| 4 | Material and labour for glazed ceramic Coloured tiles in vertical surface 450x350x7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed. |
| 5 | Dismantling of stone slabs and granite laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or platform etc. all as specified and as directed. |
| 6 | Material and labour for 20 to 25 mm thick machine cut polished Kota stone slab as in flooring/ landings over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing complete, all as specified and as directed. |
| 7 | Taking down chowkhat /frame without taking off shutter from the frame not exc 1.50 sqm each including complete accessories of any type all as specified and as directed. |
| 8 | Taking down chowkhat /frame without taking off shutter from the frame exc 1.50 Sqm and not exc 4 Sqm each including complete accessories of any type all as specified and directed |
| 9 | Supply and fix powder coated aluminium frame for doors/windows/ventilators, minimum thickness of powder coating is 50 microns, with one or more rebates etc. as in windows/ ventilators including necessary joining cleat, glazing clips, rubber neoprene packing, complete all as specified and as directed. |
| 10 | Supply and fix powder coated aluminium window and ventilator shutters, side hung type without sash bars aluminium section of weighing 0.55 kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, handle 2 Nos in doors, hinges 01 No per shutter of windows, snap beading etc. complete all as specified and as directed. Note: - Glass shall be paid separately under relevant items. |
| 11 | Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos and 03 Nos of hinges in each door, hinges, powder coated aluminum snap beading screws etc. complete all as specified and as directed. |
| 12 | Supply and fix in repairs pre-laminated particle board 12 mm thick, interior grade, pre-laminated both sides with decorative choice lamination fixed with rubber beading and suitable adhesive as in aluminium door shutter etc. complete all as specified and as directed. |
| 13 | Supply and fix 4.80 mm thick sheet tinted glass ordinary quality and glazing with aluminium clip square exc 0.5 sqm in each pane, all as specified and as directed. |
| 14 | Hacking out old broken glass (any thickness, size, quality or description)from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed. |
| 15 | Supply and fix in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all as specified and as directed. |
| 16 | Taking down shutter of any description, not exc 1Sqm each and removing from site all as specified and as directed. |
| 17 | Taking down shutter of any description, exceeding 1 sqm and not exceeding 2 sqm each and removing from site all as specified and as directed. |
| 18 | Supply and fix of second class hard wood 'teak' plain solid straight chowkhats and frames wrought framed rebated on chamfered put together with glue pinned at joints etc. complete, all as specified and as directed. |
| 19 | Supply and fix 30 mm thick second class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted complete, all as specified and as directed. |
| 20 | Supply and fix 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. as per SSR Part I section 8.24 (a) sizes of members of shutters all as specified and as directed. |
| 21 | Taking down PVC/FRP door shutters of any description with frame not exc 2 Sqm each, complete all as specified and as directed. |
| 22 | Supply and fix Solid PVC Door Frame of size 50 mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 23 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either sides and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rail with suitable PVC sheet beading and jointed together the solvent cement supplying & fixing in the frame at site as per specification and drawings complete, all as specified and as directed. |
| 24 | Supply and fix for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed |
| 25 | Supply and fix 100 mm size Mild steel butt hinges medium weight, fixed to chowkhat all as specified and as directed. |
| 26 | Supply and fix 75 mm size Mild steel butt hinges medium weight, fixed to chowkhat all as specified and as directed. |
| 27 | Supply and fix 100 mm long aluminium anodised barrel tower bolt all as specified and as directed. |
| 28 | Supply and fix 150 mm long aluminium anodised barrel tower bolt all as specified and as directed. |
| 29 | Supply and fix 150 mm long aluminium handle fabricated type anodised all as specified and as directed. |
| 30 | Supply and fix 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete, all as specified and as directed. |
| 31 | Supply and fixing 300 mm, size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete, all as specified and as directed. |
| 32 | Material and labour for Preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over pink primer including preparation of new wooden surface all as specified and as directed. |
| 33 | Supply and fixing in repairs 100 mm size mild steel body Mortice lock, vertical type, with 4 liver, fixed to aluminium door complete, all as specified and as directed. |
| 34 | Supply and fixing 4 mm thick glass sheet ordinary quality and glazing with oil putty in sqm not exc 0.50 sqm in each pane complete, all as specified and as directed. |
| 35 | Supply and fixing 4 mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete, all as specified and as directed. |
| 36 | Supply and fixing in repairs 600mm x 450mm bevelled edge mirror of selected quality glass (frameless), all as specified and directed. Make: Modi Guard or equivalent |
| 37 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, all as specified and as directed. |
| 38 | Providing and fixing false ceiling at all heights with GRG(Glass fibre reinforced gypsum) false ceiling tiles of size 595x595mm, 9mm thick of approved texture design and patterns having moisture content less than 2% humidity resistance of 99% NRCO 0.50 to 0.75 as per IS 8225:1989, Non-combustible as per BS 476(Part 4) 1970 and light reflectance of 85%(minimum) to be laid, in three horizontal level suspended on cater locking metal T-Grid of hat dipped in galvanised iron section of 0.33 mm thick (galvanised @ 120 gms per sqm including both sides, comprising of main T-runner of size 15x32mm of length 3000mmGross -T of size 15mmx 32 mm of length 1200mm and secondary intermediate Gross T size 15mmx 32 mm of length 600mm from grid module of size 600x600mm suspended from ceiling using galvanised mild steel items(galvanising @80gmperSqm) ie. 50mm long 8mm counter dia metre M-6 dash fasteners, 6mm dia fully threaded hangers rod up to 1000mm length and L-Shaped level adjuster of size 85x25x2mm, galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partitions with the help of plastic Rawal plug at 450mm c/c and 40mm long dry wall wood screws. The work shall be carried out With 9mm thick semi perforated micro regular edged GRG false ceiling tiles as per specifications all as specified and as directed. |
| 39 | Dismantling of Plain or corrugated steel any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified and as directed. |
| 40 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed |
| 41 | Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillars etc. complete all as specified and as directed. |
| 42 | Material and labour for Pre-cast cement concrete block masonry with solid blocks, 10 cm thick and setting in cement mortar 1:6 type C-1 1:3:6 (20 mm graded aggregate), complete all as specified and as directed. |
| 43 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. Including removal of debris out of side MD land, completer all specified and as directed. |
| 44 | Material and labour for plastering 10mm thick in cement mortar 1:6 on brick or stone walls or other than fair faces of brick work to be finished even and smooth (without using extra lime or cement), complete all as specified and as directed. |
| 45 | Material and labour for cement plaster 10mm thick in cement mortar 1:3 on concrete surface as on ceiling finished even and smooth without using extra cement complete all as specified and as directed. |
| 46 | Material and labour for preparation of new plastered/concrete surfaces of walls, providing 3mm thick Birla white or equivalent wall care putty to achieve smooth surfaces and applying two coats of distemper oil emulsion of approved shade/tint over a coat of compatible priming paint complete all as specified and as directed. |
| 47 | Material and labour for Preparation of new ceiling surfaces including washing, and applying two coats of oil distemper emulsion over a coat of primer on ceiling surfaces complete all as specified and as directed. |
| 48 | Supply and fix pre-colour coated high tensile strength galvalume sheet roofing with yield strength (550 NPA) pre painted with aluminium (55%) and zinc (45%) alloy coating applied through continuous hot dip process having total coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete accessories as per manufacturer's instructions through specialist agency and as per profile and shade as approved by GE. |
| 49 | Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St-240, complete all as specified and as directed. |
| 50 | Supply and fix mild steel 25x3mm MS Flat for holdfast, cleat etc. for door frame etc. conforming to Fe-410-0 or Fe-310, all as specified and as directed. |
| 51 | Material and labour for PCC 1:3:6 type C1 (using 20 mm graded stone agg.) as in hold fast block including necessary form work complete all as specified and as directed. |
| 52 | Dismantling chain link fencing, wire mesh etc. any type complete all as specified and as directed. |
| 53 | Supply only PVC coated MS chain link fencing of mesh size 50x50x4mm dia including provision of binding wire etc. complete all as specified and as directed. |
| 54 | Fixing only chain link fencing any mesh, size and type to any type of standards, etc. including provision of binding wires, complete all as specified and as directed. |
| 55 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground post embedded in concrete complete all as specified and as directed. |
| 56 | Excavating in post holes (or similar holes) each not exc. 0.5 cum getting out in soft/loose soil, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surface complete all as specified and as directed. |
| 57 | Material and labour for cement concrete 1:2:4 type B2 (using 40 mm size graded stone aggregates) in post holes complete all as specified and directed. |
| 58 | Supply and fix Mild steel screw bolts dia of neck 5 to 10 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 5cm but not exc 10cm long complete all as specified and as directed. |
| 59 | Supply and fix Mild steel round bars 10mm dia cut to length, bent to shapes required for bracing in chain link fencing confirming to Fe -410 complete all as specified and as directed. |
| 60 | Supply and fixed Mild steel work for posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 61 | Taking up or down 15mm bore galvanised steel tubing and connections complete all as specified and as directed. |
| 62 | Supply and laying 20mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 63 | Supply and fix in repairs Steel rolling shutters push pull or manual type having thickness of lath 1.25mm, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated complete all as specified and as directed. |
| 64 | Supply and fix in repairs Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed. |
| 65 | Supply and fix in repairs Ball bearing for rolling shutters complete all as specified and as directed. |
| 66 | Material and labour for preparing surfaces plastered or un-plastered by washing, brooming down or wire brushing and applying one coat of oil emulsion distemper on old decorated surfaces on walls including cornices etc complete all as specified and as directed. |
| 67 | Material and labour for preparation of surfaces of new iron and steel surfaces and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and as directed. |
| 68 | Material and labour for preparation and one coat of synthetic enamel painting on old wooden surface of any description, not otherwise described, over 10cm width or girth complete all as specified and as directed. |
| 69 | Material and labour for preparing old painted surfaces of walls by brushing/ rubbing down and applying one coat of antifungal paint on old decorated surfaces on walls including cornices etc. complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender