Tender For Replacement Of Old Gi/Cgi Roof Sheets With Insulated Puff Pannel (Addition/Alteration) At Itm Mussoorie Under Ge (I) R&D Dehradun
Tender Value
7.76 Crore
Estimated cost
Bid Submission
16 Sep 2026
5 days left
EMD
7.13 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Old Gi/Cgi Roof Sheets With Insulated Puff Pannel (Addition/Alteration) At Itm Mussoorie Under Ge (I) R&D Dehradun
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Sep-2026 | Corri01 | Date | 16-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of existing roof covering sheets (AC sheets/CGI/PGI/Mangalore tiles or any other type), including ridge, valley, and gutters, stacking serviceable materials for reuse and disposal of unserviceable materials outside MoD land, complete all as specified and directed. |
| 2 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including frame work and including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead complete all as specified and directed. |
| 3 | Providing & fixing false ceiling at all heights 12mm with semi perforated micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance\ of 99%, NRCO.50 to 0.75 as per IS8225:1987, Non combustible as per BS476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners (Groove type) of size 15 x 32 mm of length 3000mm, cross-T (Groove type) of size 15x 32mm of length 1200mm and secondary intermediate cross-T (Groove type) of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as directed. |
| 4 | S&F 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work as in false ceiling complete all as specified and directed. |
| 5 | Providing and fixing in repairs 2nd class hard wood 20mm thick plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface complete all as specified and directed. |
| 6 | Providing & fixing wood work in frames of false ceiling, partitions etc. Kiln seasoned and chemically treated hollock wood (2nd class hardwood) sawn and fixed in position with necessary stainless steel screws etc complete all as specified and directed. |
| 7 | Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood complete all as specified and directed. |
| 8 | Providing and fixing 2nd class hard wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board complete all as specified and directed. |
| 9 | M&L for painting with oil type wood preservative of approved brand and manufacture: one or more coats on old work complete all as specified and directed. |
| 10 | Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead complete all as specified and directed. |
| 11 | M&L for steel work in built up tubular Hot finished seamless type tubes (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc complete all as specified and directed. |
| 12 | M&L for painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture & Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre complete all as specified and directed. |
| 13 | M&L for painting steel Surfaces in two coats of any description, over 10cm in width or girth,not otherwise including preparation of New or previously untreated suface including priming with red oxide described complete all as specified and directed. |
| 14 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed |
| 15 | M&L for Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement: 6 coarse sand) complete all as specified & directed. |
| 16 | Material and labour for 12 mm thick cement plaster on brick wall in cement mortar 1 : 6 (1 cement : 6 fine sand) complete all as specified and directed. |
| 17 | M&L for 15 mm thick cement plaster on brick wall of mix 1 : 4 (1 cement : 4 fine sand) at height of 10m or more from GL mixed with water proofing compound as per manufactuer's instruction complete all as specified and directed. |
| 18 | Supply only water proofing compound complete all as specified and directed. |
| 19 | M&L for two or more coat of Distempering including primer in new wall surface with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed. |
| 20 | M&L for finishing walls with ready mixed acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and directed. |
| 21 | Providing and fixing Sandwich Mangalore Pattern Roof Sheets of approved colour, profile, and make, consisting of top layer pre-coated Galvalume steel sheet (0.50 mm ±0.05 mm thick) factory painted with polyester/PU coating, rigid PUF insulation core (50 mm thick, density not less than 40 kg/m³), and bottom layer pre-coated Galvalume steel sheet (0.50 mm ±0.05 mm thick), fixed with self-tapping/self-drilling screws with EPDM washers, including sealing of side and end laps with PU foam/sealant tape, complete all as specified and directed. |
| 22 | Providing and fixing precoated galvanised steel sheet to matching mangalore pattern profile, roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete as in Ridges plain (500 - 600mm width ), packing with silion gel complete all as specified and directed. |
| 23 | M&L for providing and fixing flashings, barge boards, corner pieces, Gutters (60mm ovel all girth), and down-take pipes in matching pre-coated Galvalume steel, 0.50 mm ±0.05 mm thick, including bends, shoes, offsets, fixtures and accessories, fixed in position with self-tapping screws and EPDM washers, complete all as specified and directed. |
| 24 | M&L for factory made PVC desighner weather board 18 to 20 mm thick, 300 mm wide, (density not less than 650kg/cum) fixed at eaves level of roof sheeting with screws/fasteners including all necessary fixing arrangement, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 25 | M&L for factory made PVC desighner weather board 18 to 20 mm thick, 300 mm wide, (density not less than 650kg/cum) fixed at eaves level of roof sheeting with screws/fasteners including all necessary fixing arrangement, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 16, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender