Tender For Repair To Sunken Tilling, Flooring, Joinery, Pumbing, Plastering, Painting Etc In Omq Single Living Offrs Accn, Offrs Mess, Offrs Institue, Mes Ib In Domestic Area At Af Stn Utarlai
Tender Value
20 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
1 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Sunken Tilling, Flooring, Joinery, Pumbing, Plastering, Painting Etc In Omq Single Living Offrs Accn, Offrs Mess, Offrs Institue, Mes Ib In Domestic Area At Af Stn Utarlai
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed. |
| 2 | M&L for rendering 15 mm thick in CM 1:6 on stone masonry/concrete surfaces/ brick / PCC block surface, finished even and smooth without using extra cement. |
| 3 | M&L for rendering 15 mm thick in CM 1:4 on stone masonry/concrete surfaces/ brick / PCC block surface,Finished even and fair without using extra cement. |
| 4 | M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces in ceiling including finishing even and smooth without using extra cement. |
| 5 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted, over a coat of chalk whiting all as directed. |
| 6 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint, white or tinted, all as directed. |
| 7 | M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying two coats of white wash. |
| 8 | Material & Labour for preparation of old plastered/unplastered surfaces by brooming down or steel wire brushing scrapping down smoke ,roof moulds moss and efflorescent salt and trading oil and greasing spots of walls and applying one coat of white wash on wall all as specified. |
| 9 | All as per item No 8 above but on ceiling and in one coat white wash complete all as specified |
| 10 | Material and Labour for preparation of old painted surfaces of wood & wood based materials over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed by the Engr-in-Charge. |
| 11 | M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint. |
| 12 | M&L for washing, rubbing down and stopping of distempered and painted surfaces of walls including removing of undesired nails and filling the holes, undulations etc with putty and applying one coat of oil bound distemper, white or tinted complete all as specified and directed. |
| 13 | Hacking out old broken glass (any thickness, size quality of description) from metal frame including punching or drilling out old glazing pins./springs clips complete all as specified and directed. |
| 14 | S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads in square n.exc. 0.5 sqm in each pane. |
| 15 | ditto- all as per item No. 14 above but 5.00mm thick and area exc 0.5 Sqm each pane |
| 16 | Supply & Fix as in repairs 3 mm thick frosted glass ordinaary quality and glazing with oil putty in sqaure n.exc 0.5 sqm in each pane complete all as specified and directed |
| 17 | S&F in repairs stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden/aluminium beads supplied with shutters. |
| 18 | Supply & Fix as in repair 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed |
| 19 | Supply & Fix as in repairs aluminium alloy anodised sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium complete all as specified and as directed |
| 20 | Supply & Fix in repairs hasp and staple of size 100 mm aluminium anodised wire type including bolt to hinges plate and fixed with screws complete all as specifed and directed |
| 21 | Supply & Fix in repairs floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 150mm long complete all as specified and directed |
| 22 | S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150mm. |
| 23 | Supply & Fix as in repair 18/19 mm thick prelaminated particle board interior grade, prelaminated both side face with decorative choice lamination one side and other side balancing white, fixed with screws or timber leaping on cutting exposded edges polishing complete as in built in shelves, cabinets , kitchen cupbords, modular kitchen drawer and almirah shutters or other placed complete as in built in shelves, cabinets partions etc including dismantling of old board. complete all as specified and directed. |
| 24 | S&F in repairs magnetic wardrobe ball catcher suitable for shutters fixed with nut,screw and washers of mild steel,bright finished. |
| 25 | S&F in repair Butt hinges,75 mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised & fixed type . |
| 26 | Supply & Fix in repairs aluminium anodised barrel tower bolt or extruded section length of bolt 150 mm long complete all as specified and directed Please Enable Macros to View BoQ information |
| 27 | Supply & Fix in repairs aluminium anodised barrel tower bolt or extruded section length of bolt 150 mm long complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender