Tender For Special Repair To Lt Panels And Connected Items At Pyro, Pinaka, Nag Mixture Bldg, Magazine Area And Apb Bldg In Hemrl Pune
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Sep 2026
16 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Lt Panels And Connected Items At Pyro, Pinaka, Nag Mixture Bldg, Magazine Area And Apb Bldg In Hemrl Pune
BOQ
| Sl. No. | Item Description |
| 1 | Taking out old serviceable/unserviceable LT Panel/Capacitor panel of any description or capacity keeping aside in safe custody for schedule of Credit complete all as specified and directed |
| 2 | Supply, fixing and commissioning of CPRI approved factory made LT cubicle panel board outdoor type conforming to IS/IEC-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick CRCA sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection IP 56, 415 volts, 3 phase, 4 wire, 50 Hz having aluminium bus bar of capacity 1200 Amps TPN duly colour coded and for neutral supported with DMC/SMC insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 KA for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of CT's of metering, selector switches for voltmeter and ammeter, set of three LED type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in PCC 1:2:4 type B1, MS channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-Incoming: (a) ACB adjustable type with thermal magnetic release 4 pole, 800A, 415V, 50 KA, 50 Hz - 01 No. Outgoing: (b) MCCB 4P, 400 Amps, 36 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 03 Nos, (c) MCCB 4P, 125 Amps, 25 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 Nos, (d) Panel mounted type digital multifunctional energy meter A, V,Z, KW, PF T operated, LT 3 Phase, 4 wire inclding CT ratio 630/5 - 01 Nos, (e) Control MCB 'C' curve, SP, 6 to 32A, 10KA, 'C' Curve - 02 Nos, (f) LED phase indicator (R,Y & B) - 01 Set. (Pyro Sub Stn) |
| 3 | Supply, fixing and commissioning of CPRI approved factory made LT cubicle panel board outdoor type conforming to IS/IEC-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick CRCA sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection IP 56, 415 volts, 3 phase, 4 wire, 50 Hz having aluminium bus bar of capacity 1200 Amps TPN duly colour coded and for neutral supported with DMC/SMC insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 KA for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of CT's of metering, selector switches for voltmeter and ammeter, set of three LED type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in PCC 1:2:4 type B1, MS channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-Incoming: (a) ACB adjustable type with thermal magnetic release 4 pole, 800A, 415V, 50 KA, 50 Hz - 01 No. Outgoing: (b) MCCB 4P, 400 Amps, 36 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 Nos, (c) MCCB 4P, 315 Amps, 25 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 Nos, (d) MCCB 4P, 250 Amps, 25 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 Nos (e) Panel mounted type digital multifunctional energy meter A, V,Z, KW, PF T operated, LT 3 Phase, 4 wire inclding CT ratio 630/5 - 01 Nos, (e) Control MCB 'C' curve, SP, 6 to 32A, 10KA, 'C' Curve - 02 Nos, (f) LED phase indicator (R,Y & B) - 01 Set. (Nag Mixture Bldg) |
| 4 | Supply, fixing and commissioning of CPRI approved factory made LT cubicle panel board outdoor type conforming to IS/IEC-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick CRCA sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection IP 56, 415 volts, 3 phase, 4 wire, 50 Hz having aluminium bus bar of capacity 1200 Amps TPN duly colour coded and for neutral supported with DMC/SMC insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 KA for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of CT's of metering, selector switches for voltmeter and ammeter, set of three LED type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in PCC 1:2:4 type B1, MS channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-Incoming: (a) ACB adjustable type with thermal magnetic release 4 pole, 800A, 415V, 50 KA, 50 Hz - 01 No. Outgoing: (b) MCCB 4P, 400 Amps, 36 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 Nos, (c) MCCB 4P, 320 Amps, 36 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 Nos, (d) MCCB 4P, 200 Amps, 25 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 Nos, (e) MCCB 4P, 200 Amps, 25 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 Nos, (f) MCCB 4P, 100 Amps, 25 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 Nos (g) Panel mounted type digital multifunctional energy meter A, V,Z, KW, PF T operated, LT 3 Phase, 4 wire inclding CT ratio 630/5 - 01 Nos, (h) Control MCB 'C' curve, SP, 6 to 32A, 10KA, 'C' Curve - 02 Nos, (h) LED phase indicator (R,Y & B) - 01 Set. (Sub Stn No 34) |
| 5 | Supply, fixing and commissioning of CPRI approved factory made LT cubicle panel board Indoor type conforming to IS/IEC-61439-1&2 : 2011 with canopy, louvers & shutters made out of 2 mm thick CRCA sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection IP 56, 415 volts, 3 phase, 4 wire, 50 Hz having aluminium bus bar of capacity 1000 Amps TPN duly colour coded and for neutral supported with DMC/SMC insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 KA for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of CT's of metering, selector switches for voltmeter and ammeter, set of three LED type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in PCC 1:2:4 type B1, MS channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-Incoming: (a) MCCB adjustable type with thermal magnetic release 4 pole, 630 A, 415V, 50 KA, 50 Hz - 01 No. Outgoing: (b) MCCB 4P, 400 Amps, 36 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 Nos, (c) MCCB 4P, 200 Amps, 25 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 Nos, (d) MCCB 4P, 63 Amps, 25 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 03 Nos (e) Panel mounted type digital multifunctional energy meter A, V,Z, KW, PF T operated, LT 3 Phase, 4 wire inclding CT ratio 500/5 - 01 Nos, (f) Control MCB 'C' curve, SP, 6 to 32A, 10KA, 'C' Curve - 02 Nos, (f) LED phase indicator (R,Y & B) - 01 Set. (Pinaka Bldg) |
| 6 | Supply, fixing and commissioning of CPRI approved factory made LT cubicle panel board outdoor type conforming to IS/IEC-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick CRCA sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection IP 56, 415 volts, 3 phase, 4 wire, 50 Hz having aluminium bus bar of capacity 1200 Amps TPN duly colour coded and for neutral supported with DMC/SMC insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 KA for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of CT's of metering, selector switches for voltmeter and ammeter, set of three LED type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in PCC 1:2:4 type B1, MS channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-Incoming: (a) ACB adjustable type with thermal magnetic release 4 pole, 800A, 415V, 50 KA, 50 Hz - 01 No. Outgoing: (b) MCCB 4P, 400 Amps, 36 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 Nos, (c) MCCB 4P, 250 Amps, 36 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 Nos, (d) MCCB 4P, 200 Amps, 25 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 Nos, (e) MCCB 4P, 125 Amps, 25 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 Nos, (f) MCCB 4P, 100 Amps, 25 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 Nos (g) Panel mounted type digital multifunctional energy meter A, V,Z, KW, PF T operated, LT 3 Phase, 4 wire inclding CT ratio 630/5 - 01 Nos, (h) Control MCB 'C' curve, SP, 6 to 32A, 10KA, 'C' Curve - 02 Nos, (h) LED phase indicator (R,Y & B) - 01 Set. (Sub Stn No 19) |
| 7 | Supply, fixing and commissioning of CPRI approved factory made LT cubicle panel board outdoor type conforming to IS/IEC-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick CRCA sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection IP 56, 415 volts, 3 phase, 4 wire, 50 Hz having aluminium bus bar of capacity 1000 Amps TPN duly colour coded and for neutral supported with DMC/SMC insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 KA for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of CT's of metering, selector switches for voltmeter and ammeter, set of three LED type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in PCC 1:2:4 type B1, MS channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-Incoming: (a) MCCB adjustable type with thermal magnetic release 4 pole, 630 A, 415V, 50 KA, 50 Hz - 01 No. Outgoing: (b) MCCB 4P, 315 Amps, 36 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 Nos, (c) MCCB 4P, 200 Amps, 25 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 Nos, (d) MCCB 4P, 125 Amps, 25 KA,415V, AC supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 Nos (e) Panel mounted type digital multifunctional energy meter A, V,Z, KW, PF T operated, LT 3 Phase, 4 wire inclding CT ratio 500/5 - 01 Nos, (f) Control MCB 'C' curve, SP, 6 to 32A, 10KA, 'C' Curve - 02 Nos, (g) LED phase indicator (R,Y & B) - 01 Set. (Sub Stn No 37)) |
| 8 | Supply and Laying XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of size 185 Sqmm 3.5 Core in trenches or fixed on wall/floor/poles in replacement complete all as specified and directed |
| 9 | All as per item No 08 but 240 Sqmm 3.5 Core complete all as specified and directed |
| 10 | All as per item No 08 but 300 Sqmm 3.5 Core complete all as specified and directed |
| 11 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for taking out/laying of LT under ground cable and getting out in the following type of earth stata complete all as specified and as directed by Engr-in charge :-a) Soft/ loose Soil |
| 12 | (b) Hard / dense soil |
| 13 | Supplying and laying un-reinforced precast concrete cable cover, Class HV, Type 1, flat, size 250mmx l50mm x 40m complete all as specified and directed by Engr-in-Charge . |
| 14 | Supplying, spreading, leveling and well ramming in layers not exceeding 20 cm in height stone crushed Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge . |
| 15 | Material and Labour for returning/filling available excavated earth (excluding rock) in trenches, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 metres complete all as specified and directed by Engr-in-Charge. |
| 16 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge . |
| 17 | Material and labour for earthing in repairs complete with galvanised steel earth plate electrode 60 × 60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip 32×6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed by Engr-in charge . |
| 18 | Supply and fix in replacement GI strip 32mmx 6mm burried in ground complete all as specified and directed by Engr-in charge . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender